Dotaz: SE K500i jako modem

[kovar.pavel]

Ahoj
Chci se zeptat jestli nekdo nevi jak rozchodit mobil Sony Ericsson K550i jako modem v Linuxu. Trochu jsem googlil ale nic funkcniho jsem nenansel. Neni to akutni spis me to jen zajima. Zkousel jsem to u brachy na Windows a tam to slapalo.
Pavel

Odpovědi

[BigWrigley]

A co zobrazi dmesg po zapojeni do USB portu? Verim, ze pokud se nenadetekuje spravne, sel py primet ke spolupraci modul usbserial.

Ales

[kovar.pavel]

[ 576.235126] usb 7-4: USB disconnect, address 5
[ 581.494161] usb 4-2: new full speed USB device using uhci_hcd and address 3
[ 581.668340] usb 4-2: configuration #3 chosen from 1 choice
[ 582.023330] cdc_acm 4-2:3.1: ttyACM0: USB ACM device
[ 582.025962] cdc_acm 4-2:3.3: ttyACM1: USB ACM device
[ 582.027880] usbcore: registered new interface driver cdc_acm
[ 582.027887] /build/buildd/linux-2.6.24/drivers/usb/class/cdc-acm.c: v0.25:USB Abstract Control Model driver for USB modems and ISDN adapters
[ 582.074301] usb0: register 'cdc_ether' at usb-0000:00:1d.1-2, CDC Ethernet Device, 02:80:37:0a:03:00
[ 582.074323] usbcore: registered new interface driver cdc_ether
[ 643.474432] usb 4-2: USB disconnect, address 3
[ 643.477759] usb0: unregister 'cdc_ether' usb-0000:00:1d.1-2, CDC Ethernet Device
[ 665.776390] usb 4-2: new full speed USB device using uhci_hcd and address 4
[ 665.951919] usb 4-2: configuration #3 chosen from 1 choice
[ 665.959816] cdc_acm 4-2:3.1: ttyACM0: USB ACM device
[ 665.965931] cdc_acm 4-2:3.3: ttyACM1: USB ACM device
[ 665.981846] usb0: register 'cdc_ether' at usb-0000:00:1d.1-2, CDC Ethernet Device, 02:80:37:0a:03:00

Rekl bych ze tohle bymohlo byt ono

[Balu]

Device korektne vytvorí, kde je problém? Malo by stačiť nastaviť ppp, alebo svoje obľúbené klikátko a keď to fungovať nebude, dať sem konkrétny problém.

[boar]

testni ifconfig usb0 ..., muj k810i funguje takhle ... a pak vlastne staci udelat akort dhclient usb0.
uvazuju z radku:

[ 582.074301] usb0: register 'cdc_ether' at usb-0000:00:1d.1-2, CDC Ethernet Device, 02:80:37:0a:03:00
Ethernet Device, 02:80:37:0a:03:00

[BigWrigley]

Modem bude bud /dev/ttyACM0 nebo /dev/ttyACM0. Staci pouzit v kppp nebo jine podobne aplikaci/skriptu.

Jak funguje zarizeni vytvorene modulem cdc_ether, bohuzel, nevim, nemam zkusenost.

Ales

[kovar.pavel]

--> Ignoring malformed input line: ";Do NOT edit this file by hand!"
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATX3
ATX3
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Modem initialized.
--> Please enter password (or empty password to stop):

Tohle je vypis z gnome-ppp a dal mi to nechce jet....

[boar]

ifconfig usb0
dhclient usb0 (mozna dhcpcd)

[jyrki]

jj. tohle mi funguje s K610i. V Archu davam:
ifconfig usb0
dhcpcd usb0

[BigWrigley]

A kam se vlastne chcete pripojit? Pokud do GPRS, poslete nasledujici (neznam wvdial), ale obecne, v chat scriptu by melo byt toto:

atz

at+cgdcont=1,"IP","nazev_prist.bodu_vaseho_operatora"

atd*99# (nekdy atd*99***1#)

Username ani passwd neni nutne vyplnovat (GGSN, alespon u T-Mobile doplni vase MSISDN) Prikladu chat scriptu a konfiguraku pro pppd najdete na internetu spoustu.

Ales