Dotaz: Divna plocha v KDE

[Ku8aZ]

Zdravim,

presel jsem z Gnome na KDE a vsechno je fajn, jen mi nejak blbne plocha. Pokud na ni kliknu levym tlacitkem na mysi, tak se mi v tom miste normalne objevi 2 pixely, jako bych tam neco kreslil...stejne se to tak chova pri presouvani ikon (zustavaji cary). Pokud dam Obnovit plochu, je vse zas OK, ale jen do dalsiho kliknuti

Povoleni aplikaci na plose jsem mel zapnute i vypnute a dela to vzdy. Nevite nekdo co s tim?

Distro Gentoo, KDE 3.3.0, zkompilovano rucne.

Predem diky a preju pekny den

Odpovědi

[o.k.]

Tahky mam kde3.3 a Gentoo a jde to bez problemu. Nebude to nejakej problem s nastavenim X ? O jakou jde grafickou kartu, co je v /etc/X11/xorg.conf ?

[Ku8aZ]

Karta je ATI Mobility Radeon 9000 a v sekci graf. karty v xorg.conf mam:

# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

# === ATI device section ===

Section "Device"
    Identifier                          "ATI-LCD"
    Driver                              "fglrx"
    
# === Own Settings (CTh) ===
    VideoRam        65536
    Option "AGPMode"   "4"
    Option "AGPFastWrite"  "True"
    Option "EnablePageFlip"  "True"
    Option "CrtScreen"
# ### generic DRI settings ###
# === disable PnP Monitor  ===
    #Option                              "NoDDC"
# === disable/enable XAA/DRI ===
    Option "no_accel"                   "no"
    Option "no_dri"                     "no"
# === misc DRI settings ===
# disable DRI mtrr mapper, driver has its own code for mtrr
    Option "mtrr"                       "off" 
# ### FireGL DDX driver module specific settings ###
# === Screen Management ===
    Option "DesktopSetup"               "0x00000000"
    Option "MonitorLayout"              "AUTO, AUTO"
    
    Option "IgnoreEDID"                 "off"
    #Option "HSync2"                     "31.5 - 37.9"
    #Option "VRefresh2"                  "60 - 75"
    Option "HSync2"   "31.5"
    Option "VRefresh2"   "20-60"
    Option "ScreenOverlap"              "0" # "0"
# === TV-out Management ===
    Option "NoTV"                       "no"
    Option "TVStandard"                 "PAL-D"
    Option "TVHSizeAdj"                 "0"
    Option "TVVSizeAdj"                 "0"
    Option "TVHPosAdj"                  "0"
    Option "TVVPosAdj"                  "0"
    Option "TVHStartAdj"                "0"
    Option "TVColorAdj"                 "0"     
    Option "GammaCorrectionI"           "0x06419064"
    Option "GammaCorrectionII"          "0x00000000"
# === OpenGL specific profiles/settings ===
    Option "Capabilities"               "0x00000000"
# === Video Overlay for the Xv extension ===
    Option "VideoOverlay"               "on"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
#       will be disabled automatically
    Option "OpenGLOverlay"              "off"
# === Center Mode (Laptops only) ===
    Option "CenterMode"                 "off" # "off"
# === Pseudo Color Visuals (8-bit visuals) ===
    Option "PseudoColorVisuals"         "off"
# === QBS Management ===
    Option "Stereo"                     "off"
    Option "StereoSyncEnable"           "1"
# === FSAA Management ===
    Option "FSAAEnable"                 "no"
    Option "FSAAScale"                  "1"
    Option "FSAADisableGamma"           "no"
    Option "FSAACustomizeMSPos"         "no"
    Option "FSAAMSPosX0"                "0.000000"
    Option "FSAAMSPosY0"                "0.000000"
    Option "FSAAMSPosX1"                "0.000000"
    Option "FSAAMSPosY1"                "0.000000"
    Option "FSAAMSPosX2"                "0.000000"
    Option "FSAAMSPosY2"                "0.000000"
    Option "FSAAMSPosX3"                "0.000000"
    Option "FSAAMSPosY3"                "0.000000"
    Option "FSAAMSPosX4"                "0.000000"
    Option "FSAAMSPosY4"                "0.000000"
    Option "FSAAMSPosX5"                "0.000000"
    Option "FSAAMSPosY5"                "0.000000"
# === Misc Options ===
    Option "UseFastTLS"                 "1"
    Option "BlockSignalsOnLock"         "on"
    Option "UseInternalAGPGART"         "yes"
    Option "ForceGenericCPU"            "no"
    Option "TMDS"   "on" # !!

    Option "KernelModuleParm"  "agplock=0"
    
    BusID "PCI:1:0:0"    # vendor=1002, device=4c66
    Screen 0

    # kvuli spatnemu xv vystupu v mplayeru
    Option "XaaNoOffscreenPixmaps"
EndSection

Myslim, ze tam neni nic, co by mohlo vadit. Je divne, ze to v Gnome nedelalo, jen v KDE

[Ku8aZ]

To jste se s tim opravdu nikdo nesetkali?? Zjistil jsem, ze to dela i v Konqueroru :( Proste se na miste kliknuti objevi 2 bile pixely...

[Peter Golis]

nie je ta karta nahodou integrovana na doske? tie maju taku vymozenost ze si clovek nastavi v biose kolko chce pouzit pamete a uberie mu to z ram. prejavuje sa to podobne, ak clovek v konfiguracii neuvedie kolko ma pamete pridelenej pre graficku kartu.

[o.k.]

Na jednom kompu mám grafiku intel integrovanou na desce a dělá to něco podobného. Dekorace oken a některé gui prvky se občas zobrazují velmi podivně. Dělá to na všech linuxech od RH6.2 až po dnešní Knopix a Danix...

[Ku8aZ]

Ta karta je integrovana, ale v NB Jinak diky za snahu, ale uz se to vyresilo. Stacilo prepnout tema z Plastik na neco jineho (napr. Keramik) a uz to nedela...asi chyba tematu A pritom se mi ten Plastik tak libil