Micronet SP907BB V2 USB WiFi

Ovladač:

dodává někdo jiný

Technické parametry

IEEE802.11b Wireless Lan (11Mbps)
Vyklapacia antenka (nema konektor)
chipset Atmel AT76C505
vysielaci modul RFMD2958
dalsie podrobnosti
http://www.micronet.info/Products/wireless/SP907BB.asp

Identifikace pod Linuxem

lsusb -v
Bus 003 Device 010: ID 12fd:1001
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0         8
  idVendor           0x12fd
  idProduct          0x1001
  bcdDevice            1.00
  iManufacturer           0
  iProduct                0
  iSerial                 0
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           32
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0x80
    MaxPower              500mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass      0
      bInterfaceProtocol    255
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               none
          Usage Type               Data
        wMaxPacketSize     0x0040  bytes 64 once
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               none
          Usage Type               Data
        wMaxPacketSize     0x0040  bytes 64 once
        bInterval               0

Postup zprovoznění pod Linuxem

Na CD su drivery z 05.2003
3 moznosti driverov: atmelwlandriver, at76c503a, NdisWrapper + drivery z Windows
Vybral som si drivery z at76c503a.berlios.de
pre kernel 2.6 treba stiahnut z CVS
pre kernel 2.4 su pripravene v klasickom .tar.gz

vyrobit zrojaky z cvs:
tar xvzf at76c503a-cvsroot.tar.gz
mv at76c503a CVS
cvs -d `pwd`/CVS co at76c503a

make
su -c "make install"

modprobe at76c505-rfmd2958
zasunut wifi do usb portu

iwconfig wlan0 essid linux_siet mode Ad-Hoc
ifconfig wlan0 up
ifconfig wlan0 192.168.50.10 netmask 255.255.255.0


Edit: pred zadanim make sa oplati v subore Makefile.k26
aktivovat Flag  
EXTRA_CFLAGS = -DCOMPILE_FIRMWARE_INTO_DRIVER
(odstranit #) Update firmware sa vlozi do modulu 
jadra (inak sa nacitava z adresara kde sa robil preklad)

Poznámka

skusane ma Fedora Core 2, kernel 2.6.8-1.521, MB s VIA KT600 chipsetom
treba mat nainstalovany kompilator, zdrojaky jadra, wireless-tools, cvs
Siet som testoval v rezime ad-hoc s iPAQ 4150, vsetko fungovalo.
Zariadenie je kompatibilne s Linuxom. Drivery su vo vyvoji, preto je 
treba prekladat.
Edit: vyskusane aj s notebookom s chipsetom VIA P4M266

Dokument vytvořil: Zaphod, 9.9.2004 09:19 | Zobrazeno: 1947×