Dotaz: konfigurace wireless karty ricoh

[koza]

mam tu zapeklitost zktorou bojujem us par tyzdnov a dostal som sa k zkompilovaniu 2.6.13. Toto jadro mi konecne vypise po zadani #cardctl ident
Socket 0:
product info: " ", "IEEE 802.11 Wireless LAN/PC Card", ""
manfid: 0xd601, 0x0005
function: 6 (network)

pridal som do /etc/pcmcia/config
device "hostap_cs"
class "network" module "hostap_cs"

card "XI-325"
manfid 0xd601, 0x0005
bind "hostap_cs"

a to iste samozrejme i do /etc/pcmcia/hostap_cs.conf, pretoze som sa rozhodol pre hostap ovladac..
po restartovani pcmcia mam v logu:

Sep 13 13:31:44 gejt cardmgr[6544]: executing: 'modprobe -r hostap 2>&1'
Sep 13 13:31:44 gejt cardmgr[6544]: + FATAL: Module hostap is in use.
Sep 13 13:31:44 gejt cardmgr[6544]: modprobe exited with status 1
Sep 13 13:31:44 gejt cardmgr[6544]: exiting
Sep 13 13:31:44 gejt ds: ds_release(socket 0)
Sep 13 13:31:44 gejt ds: ds_open(socket 0)
Sep 13 13:31:44 gejt ds: ds_open(socket 1)
Sep 13 13:31:44 gejt ds: ds_open(socket 1)
Sep 13 13:31:44 gejt cardmgr[6969]: watching 1 socket
Sep 13 13:31:44 gejt cardmgr[6969]: socket 0: XI-325
Sep 13 13:31:45 gejt cardmgr[6969]: 'hostap_cs' already bound to socket 0
Sep 13 13:31:45 gejt cardmgr[6969]: get dev info on socket 0 failed: No such device

wtf?

Odpovědi

[koza]

pokad nahraju orinoco_cs tak karta nabehne, problem je ze ma byt nakonfigurovana jako "MASTER", coz ale pres orinoco neudelam..

vypis po nahradeni hostap_cs >> orinoco_cs

Sep 13 15:14:43 gejt ds: ds_release(socket 0)
Sep 13 15:14:43 gejt ds: ds_open(socket 0)
Sep 13 15:14:43 gejt ds: ds_open(socket 1)
Sep 13 15:14:43 gejt ds: ds_open(socket 1)
Sep 13 15:14:43 gejt cardmgr[7148]: watching 1 socket
Sep 13 15:14:43 gejt cardmgr[7148]: socket 0: XI-325
Sep 13 15:14:44 gejt orinoco 0.15rc2 (David Gibson , Pavel Roskin , et al)
Sep 13 15:14:44 gejt orinoco_cs 0.15rc2 (David Gibson , Pavel Roskin , et al)
Sep 13 15:14:44 gejt eth1: Hardware identity 800c:0000:0001:0000
Sep 13 15:14:44 gejt eth1: Station identity 001f:0006:0001:0003
Sep 13 15:14:44 gejt eth1: Firmware determined as Intersil 1.3.6
Sep 13 15:14:44 gejt eth1: Ad-hoc demo mode supported
Sep 13 15:14:44 gejt eth1: IEEE standard IBSS ad-hoc mode supported
Sep 13 15:14:44 gejt eth1: WEP supported, 104-bit key
Sep 13 15:14:44 gejt eth1: MAC address 00:60:B3:8D:78:85
Sep 13 15:14:44 gejt eth1: Station name "Prism I"
Sep 13 15:14:44 gejt eth1: ready
Sep 13 15:14:44 gejt cardmgr[7148]: get dev info on socket 0 failed: No such device
Sep 13 15:14:44 gejt eth1: index 0x01: Vcc 5.0, irq 11, io 0xd100-0xd13f