Dotaz: ndiswrapper posledni sance

[Robotics]

Dobry den, prinesl sem co nejvetsi vycet informaci co sem mohl vycucnout z linuxu. Prosim pomozte mi nastavit nejak tu wifi abych se mohl pripojit na wifinu brachovu . Jinak mi nepude net na linuxu . Pritom na Ubuntu to jelo v pohode.

Zde je výpis vseho mozneho:

#dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.26-1-amd64 (Debian 2.6.26-12) (waldi@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-24)) #1 SMP Mon Dec 15 17:25:36 UTC 2008
[    0.000000] Command line: root=/dev/sda3 ro quiet
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000007fee0000 (usable)
[    0.000000]  BIOS-e820: 000000007fee0000 - 000000007fee3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data)
[    0.000000]  BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved)
[    0.000000]  BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[    0.000000] Entering add_active_range(0, 256, 524000) 1 entries of 3200 used
[    0.000000] max_pfn_mapped = 1048576
[    0.000000] init_memory_mapping
[    0.000000] DMI 2.4 present.
[    0.000000] ACPI: RSDP 000F6D90, 0014 (r0 GBT   )
[    0.000000] ACPI: RSDT 7FEE3040, 003C (r1 GBT    GBTUACPI 42302E31 GBTU  1010101)
[    0.000000] ACPI: FACP 7FEE30C0, 0074 (r1 GBT    GBTUACPI 42302E31 GBTU  1010101)
[    0.000000] ACPI: DSDT 7FEE3180, 4A88 (r1 GBT    GBTUACPI     1000 MSFT  100000C)
[    0.000000] ACPI: FACS 7FEE0000, 0040
[    0.000000] ACPI: HPET 7FEE7D80, 0038 (r1 GBT    GBTUACPI 42302E31 GBTU       98)
[    0.000000] ACPI: MCFG 7FEE7E00, 003C (r1 GBT    GBTUACPI 42302E31 GBTU  1010101)
[    0.000000] ACPI: APIC 7FEE7C80, 0084 (r1 GBT    GBTUACPI 42302E31 GBTU  1010101)
[    0.000000] ACPI: SSDT 7FEE7E80, 015C (r1  PmRef  Cpu0Ist     3000 INTL 20040311)
[    0.000000] ACPI: SSDT 7FEE8310, 0275 (r1  PmRef    CpuPm     3000 INTL 20040311)
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-000000007fee0000
[    0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[    0.000000] Entering add_active_range(0, 256, 524000) 1 entries of 3200 used
[    0.000000] Bootmem setup node 0 0000000000000000-000000007fee0000
[    0.000000]   NODE_DATA [000000000000c000 - 0000000000010fff]
[    0.000000]   bootmap [0000000000011000 -  0000000000020fdf] pages 10
[    0.000000]   early res: 0 [0-fff] BIOS data page
[    0.000000]   early res: 1 [6000-7fff] TRAMPOLINE
[    0.000000]   early res: 2 [200000-675397] TEXT DATA BSS
[    0.000000]   early res: 3 [3798f000-37fef346] RAMDISK
[    0.000000]   early res: 4 [9f800-fffff] BIOS reserved
[    0.000000]   early res: 5 [8000-bfff] PGTABLE
[    0.000000]  [ffffe20000000000-ffffe20001bfffff] PMD -> [ffff810001200000-ffff810002dfffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   DMA32        4096 ->  1048576
[    0.000000]   Normal    1048576 ->  1048576
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0:        0 ->      159
[    0.000000]     0:      256 ->   524000
[    0.000000] On node 0 totalpages: 523903
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 1246 pages reserved
[    0.000000]   DMA zone: 2697 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 7109 pages used for memmap
[    0.000000]   DMA32 zone: 512795 pages, LIFO batch:31
[    0.000000]   Normal zone: 0 pages used for memmap
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Setting APIC routing to flat
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 80000000 (gap: 7ff00000:70100000)
[    0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] PERCPU: Allocating 37168 bytes of per cpu data
[    0.000000] NR_CPUS: 32, nr_cpu_ids: 4
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 515492
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: root=/dev/sda3 ro quiet
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[    0.000000] TSC calibrated against PM_TIMER
[    0.000000] time.c: Detected 2666.667 MHz processor.
[    0.004000] Console: colour VGA+ 80x25
[    0.004000] console [tty0] enabled
[    0.004000] Checking aperture...
[    0.004000] Calgary: detecting Calgary via BIOS EBDA area
[    0.004000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.004000] Memory: 2055484k/2096000k available (2226k kernel code, 40128k reserved, 1082k data, 392k init)
[    0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[    0.004000] hpet clockevent registered
[    0.083790] Calibrating delay using timer specific routine.. 5337.12 BogoMIPS (lpj=10674251)
[    0.083822] Security Framework initialized
[    0.083827] SELinux:  Disabled at boot.
[    0.083829] Capability LSM initialized
[    0.083994] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.084005] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.084005] Mount-cache hash table entries: 256
[    0.084005] Initializing cgroup subsys ns
[    0.084005] Initializing cgroup subsys cpuacct
[    0.084005] Initializing cgroup subsys devices
[    0.084005] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.084005] CPU: L2 cache: 4096K
[    0.084005] CPU 0/0 -> Node 0
[    0.084005] CPU: Physical Processor ID: 0
[    0.084005] CPU: Processor Core ID: 0
[    0.084005] CPU0: Thermal monitoring enabled (TM2)
[    0.084005] using mwait in idle threads.
[    0.084005] ACPI: Core revision 20080321
[    0.136008] CPU0: Intel(R) Core(TM)2 Duo CPU     E6750  @ 2.66GHz stepping 0b
[    0.136008] Using local APIC timer interrupts.
[    0.140008] APIC timer calibration result 20833367
[    0.140008] Detected 20.833 MHz APIC timer.
[    0.140008] Booting processor 1/1 ip 6000
[    0.148009] Initializing CPU#1
[    0.148009] Calibrating delay using timer specific routine.. 5333.38 BogoMIPS (lpj=10666768)
[    0.148009] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.148009] CPU: L2 cache: 4096K
[    0.148009] CPU 1/1 -> Node 0
[    0.148009] CPU: Physical Processor ID: 0
[    0.148009] CPU: Processor Core ID: 1
[    0.148009] CPU1: Thermal monitoring enabled (TM2)
[    0.228014] CPU1: Intel(R) Core(TM)2 Duo CPU     E6750  @ 2.66GHz stepping 0b
[    0.228014] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[    0.232014] Brought up 2 CPUs
[    0.232014] Total of 2 processors activated (10670.50 BogoMIPS).
[    0.232014] CPU0 attaching sched-domain:
[    0.232014]  domain 0: span 0-1
[    0.232014]   groups: 0 1
[    0.232014]   domain 1: span 0-1
[    0.232014]    groups: 0-1
[    0.232014] CPU1 attaching sched-domain:
[    0.232014]  domain 0: span 0-1
[    0.232014]   groups: 1 0
[    0.232014]   domain 1: span 0-1
[    0.232014]    groups: 0-1
[    0.232014] net_namespace: 1224 bytes
[    0.232014] Booting paravirtualized kernel on bare hardware
[    0.232014] NET: Registered protocol family 16
[    0.232014] ACPI: bus type pci registered
[    0.232014] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
[    0.232014] PCI: MCFG area at f0000000 reserved in E820
[    0.232014] PCI: Using MMCONFIG at f0000000 - f3ffffff
[    0.232014] PCI: Using configuration type 1 for base access
[    0.236014] ACPI: EC: Look up EC in DSDT
[    0.240015] ACPI: Interpreter enabled
[    0.240015] ACPI: (supports S0 S3 S4 S5)
[    0.240015] ACPI: Using IOAPIC for interrupt routing
[    0.244015] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.244015] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
[    0.244015] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
[    0.244015] PCI: Transparent bridge - 0000:00:1e.0
[    0.244015] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.244015] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[    0.244015] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[    0.244015] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
[    0.244015] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[    0.260016] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[    0.260016] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[    0.260016] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 *14 15)
[    0.260016] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14 *15)
[    0.260016] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.260016] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[    0.260016] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
[    0.260016] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[    0.260016] Linux Plug and Play Support v0.97 (c) Adam Belay
[    0.260016] pnp: PnP ACPI init
[    0.260016] ACPI: bus type pnp registered
[    0.260016] pnp 00:00: parse allocated resources
[    0.260016] pnp 00:00:   add io  0xcf8-0xcff flags 0x1
[    0.260016] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.260016] pnp 00:01: parse allocated resources
[    0.260016] pnp 00:01:   add io  0x10-0x1f flags 0x1
[    0.260016] pnp 00:01:   add io  0x22-0x3f flags 0x1
[    0.260016] pnp 00:01:   add io  0x44-0x5f flags 0x1
[    0.260016] pnp 00:01:   add io  0x62-0x63 flags 0x1
[    0.260016] pnp 00:01:   add io  0x65-0x6f flags 0x1
[    0.260016] pnp 00:01:   add io  0x74-0x7f flags 0x1
[    0.260016] pnp 00:01:   add io  0x91-0x93 flags 0x1
[    0.260016] pnp 00:01:   add io  0xa2-0xbf flags 0x1
[    0.260016] pnp 00:01:   add io  0xe0-0xef flags 0x1
[    0.260016] pnp 00:01:   add io  0x4d0-0x4d1 flags 0x1
[    0.260016] pnp 00:01:   add io  0x290-0x29f flags 0x1
[    0.260016] pnp 00:01:   add io  0x800-0x87f flags 0x1
[    0.260016] pnp 00:01:   add io  0x290-0x294 flags 0x1
[    0.260016] pnp 00:01:   add io  0x880-0x88f flags 0x1
[    0.260016] pnp 00:01: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c
[    0.260016] pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.260016] pnp 00:02: parse allocated resources
[    0.260016] pnp 00:02:   add dma 4 flags 0x4
[    0.260016] pnp 00:02:   add io  0x0-0xf flags 0x1
[    0.260016] pnp 00:02:   add io  0x80-0x90 flags 0x1
[    0.260016] pnp 00:02:   add io  0x94-0x9f flags 0x1
[    0.260016] pnp 00:02:   add io  0xc0-0xdf flags 0x1
[    0.260016] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.260016] pnp 00:03: parse allocated resources
[    0.260016] pnp 00:03:   add io  0x70-0x73 flags 0x1
[    0.260016] pnp 00:03:   add irq 8 flags 0x1
[    0.260016] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.260016] pnp 00:04: parse allocated resources
[    0.260016] pnp 00:04:   add io  0x61-0x61 flags 0x1
[    0.260016] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.260016] pnp 00:05: parse allocated resources
[    0.260016] pnp 00:05:   add io  0xf0-0xff flags 0x1
[    0.260016] pnp 00:05:   add irq 13 flags 0x1
[    0.260016] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.260016] pnp 00:06: parse allocated resources
[    0.260016] pnp 00:06:   add io  0x3f0-0x3f5 flags 0x1
[    0.260016] pnp 00:06:   add io  0x3f7-0x3f7 flags 0x1
[    0.260016] pnp 00:06:   add irq 6 flags 0x1
[    0.260016] pnp 00:06:   add dma 2 flags 0x0
[    0.260016] pnp 00:06: parse resource options
[    0.260016] pnp 00:06: new independent option
[    0.260016] pnp 00:06: new dependent option (priority 0x1)
[    0.260016] pnp 00:06:   io  min 0x3f0 max 0x3f0 align 1 size 6 flags 0x1
[    0.260016] pnp 00:06:   io  min 0x3f7 max 0x3f7 align 1 size 1 flags 0x1
[    0.260016] pnp 00:06:   irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000040 flags 0x1
[    0.260016] pnp 00:06:   dma bitmask 0x4 flags 0x0
[    0.260016] pnp 00:06: end dependent options
[    0.260016] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.260016] pnp 00:07: parse allocated resources
[    0.260016] pnp 00:07:   add io  0x3f8-0x3ff flags 0x1
[    0.260016] pnp 00:07:   add irq 4 flags 0x1
[    0.260016] pnp 00:07: parse resource options
[    0.260016] pnp 00:07: new independent option
[    0.260016] pnp 00:07: new dependent option (priority 0x1)
[    0.260016] pnp 00:07:   io  min 0x3f8 max 0x3f8 align 1 size 8 flags 0x1
[    0.260016] pnp 00:07:   irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001eb8 flags 0x1
[    0.260016] pnp 00:07: new dependent option (priority 0x1)
[    0.260016] pnp 00:07:   io  min 0x2f8 max 0x2f8 align 1 size 8 flags 0x1
[    0.260016] pnp 00:07:   irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001eb8 flags 0x1
[    0.260016] pnp 00:07: new dependent option (priority 0x1)
[    0.260016] pnp 00:07:   io  min 0x3e8 max 0x3e8 align 1 size 8 flags 0x1
[    0.260016] pnp 00:07:   irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001eb8 flags 0x1
[    0.260016] pnp 00:07: new dependent option (priority 0x1)
[    0.260016] pnp 00:07:   io  min 0x2e8 max 0x2e8 align 1 size 8 flags 0x1
[    0.260016] pnp 00:07:   irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001eb8 flags 0x1
[    0.260016] pnp 00:07: end dependent options
[    0.260016] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.260016] pnp 00:08: parse allocated resources
[    0.260016] pnp 00:08:   add io  0x378-0x37f flags 0x1
[    0.260016] pnp 00:08:   add io  0x778-0x77b flags 0x1
[    0.260016] pnp 00:08:   add irq 7 flags 0x1
[    0.260016] pnp 00:08:   add dma 3 flags 0x0
[    0.260016] pnp 00:08: parse resource options
[    0.260016] pnp 00:08: new independent option
[    0.260016] pnp 00:08: new dependent option (priority 0x1)
[    0.260016] pnp 00:08:   io  min 0x378 max 0x378 align 0 size 8 flags 0x1
[    0.260016] pnp 00:08:   io  min 0x778 max 0x778 align 0 size 4 flags 0x1
[    0.260016] pnp 00:08:   irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001eb8 flags 0x1
[    0.260016] pnp 00:08:   dma bitmask 0xb flags 0x0
[    0.260016] pnp 00:08: new dependent option (priority 0x1)
[    0.260016] pnp 00:08:   io  min 0x278 max 0x278 align 0 size 8 flags 0x1
[    0.260016] pnp 00:08:   io  min 0x678 max 0x678 align 0 size 4 flags 0x1
[    0.260016] pnp 00:08:   irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001eb8 flags 0x1
[    0.260016] pnp 00:08:   dma bitmask 0xb flags 0x0
[    0.260016] pnp 00:08: new dependent option (priority 0x1)
[    0.260016] pnp 00:08:   io  min 0x3bc max 0x3bc align 0 size 4 flags 0x1
[    0.260016] pnp 00:08:   io  min 0x7bc max 0x7bc align 0 size 4 flags 0x1
[    0.260016] pnp 00:08:   irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001eb8 flags 0x1
[    0.260016] pnp 00:08:   dma bitmask 0xb flags 0x0
[    0.260016] pnp 00:08: end dependent options
[    0.260016] pnp 00:08: Plug and Play ACPI device, IDs PNP0401 (active)
[    0.260016] pnp 00:09: parse allocated resources
[    0.260016] pnp 00:09:   add io  0x60-0x60 flags 0x1
[    0.260016] pnp 00:09:   add io  0x64-0x64 flags 0x1
[    0.260016] pnp 00:09:   add irq 1 flags 0x1
[    0.260016] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.260016] pnp 00:0a: parse allocated resources
[    0.260016] pnp 00:0a:   add io  0x400-0x4bf flags 0x1
[    0.260016] pnp 00:0a: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c
[    0.260016] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.260284] pnp 00:0b: parse allocated resources
[    0.260311] pnp 00:0b:   add mem 0xf0000000-0xf3ffffff flags 0x1
[    0.260313] pnp 00:0b: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c
[    0.264016] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.264016] pnp 00:0c: parse allocated resources
[    0.264016] pnp 00:0c:   add mem 0xcca00-0xcffff flags 0x1
[    0.264016] pnp 00:0c:   add mem 0xf0000-0xf7fff flags 0x1
[    0.264016] pnp 00:0c:   add mem 0xf8000-0xfbfff flags 0x1
[    0.264016] pnp 00:0c:   add mem 0xfc000-0xfffff flags 0x1
[    0.264016] pnp 00:0c:   add mem 0x7fee0000-0x7fefffff flags 0x1
[    0.264016] pnp 00:0c:   add mem 0x0-0x9ffff flags 0x1
[    0.264016] pnp 00:0c:   add mem 0x100000-0x7fedffff flags 0x1
[    0.264016] pnp 00:0c:   add mem 0xfec00000-0xfec00fff flags 0x1
[    0.264016] pnp 00:0c:   add mem 0xfed10000-0xfed1dfff flags 0x1
[    0.264016] pnp 00:0c:   add mem 0xfed20000-0xfed8ffff flags 0x1
[    0.264016] pnp 00:0c:   add mem 0xfee00000-0xfee00fff flags 0x1
[    0.264016] pnp 00:0c:   add mem 0xffb00000-0xffb7ffff flags 0x1
[    0.264016] pnp 00:0c:   add mem 0xfff00000-0xffffffff flags 0x1
[    0.264016] pnp 00:0c:   add mem 0xe0000-0xeffff flags 0x1
[    0.264016] pnp 00:0c: PNP0c01: calling quirk_system_pci_resources+0x0/0x15c
[    0.264016] pnp 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.264016] pnp 00:0d: parse allocated resources
[    0.264016] pnp 00:0d:   add mem 0xffb80000-0xffbfffff flags 0x1
[    0.264016] pnp 00:0d: Plug and Play ACPI device, IDs INT0800 (active)
[    0.264016] pnp: PnP ACPI: found 14 devices
[    0.264016] ACPI: ACPI bus type pnp unregistered
[    0.264016] usbcore: registered new interface driver usbfs
[    0.264016] usbcore: registered new interface driver hub
[    0.264016] usbcore: registered new device driver usb
[    0.264016] PCI: Using ACPI for IRQ routing
[    0.279455] PCI-GART: No AMD northbridge found.
[    0.279460] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.279464] hpet0: 4 64-bit timers, 14318180 Hz
[    0.283438] ACPI: RTC can wake from S4
[    0.298407] pnp: the driver 'system' has been registered
[    0.298417] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[    0.298420] system 00:01: ioport range 0x290-0x29f has been reserved
[    0.298423] system 00:01: ioport range 0x800-0x87f has been reserved
[    0.298425] system 00:01: ioport range 0x290-0x294 has been reserved
[    0.298428] system 00:01: ioport range 0x880-0x88f has been reserved
[    0.298430] system 00:01: driver attached
[    0.298439] system 00:0a: ioport range 0x400-0x4bf could not be reserved
[    0.298441] system 00:0a: driver attached
[    0.298447] system 00:0b: iomem range 0xf0000000-0xf3ffffff could not be reserved
[    0.298449] system 00:0b: driver attached
[    0.298454] system 00:0c: iomem range 0xcca00-0xcffff has been reserved
[    0.298457] system 00:0c: iomem range 0xf0000-0xf7fff could not be reserved
[    0.298459] system 00:0c: iomem range 0xf8000-0xfbfff could not be reserved
[    0.298462] system 00:0c: iomem range 0xfc000-0xfffff could not be reserved
[    0.298465] system 00:0c: iomem range 0x7fee0000-0x7fefffff could not be reserved
[    0.298467] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[    0.298470] system 00:0c: iomem range 0x100000-0x7fedffff could not be reserved
[    0.298473] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved
[    0.298476] system 00:0c: iomem range 0xfed10000-0xfed1dfff could not be reserved
[    0.298478] system 00:0c: iomem range 0xfed20000-0xfed8ffff could not be reserved
[    0.298481] system 00:0c: iomem range 0xfee00000-0xfee00fff could not be reserved
[    0.298484] system 00:0c: iomem range 0xffb00000-0xffb7ffff could not be reserved
[    0.298487] system 00:0c: iomem range 0xfff00000-0xffffffff could not be reserved
[    0.298489] system 00:0c: iomem range 0xe0000-0xeffff has been reserved
[    0.298491] system 00:0c: driver attached
[    0.299504] PCI: Bridge: 0000:00:01.0
[    0.299504]   IO window: a000-afff
[    0.299504]   MEM window: 0xf4000000-0xf7ffffff
[    0.299504]   PREFETCH window: 0x00000000e0000000-0x00000000efffffff
[    0.299504] PCI: Bridge: 0000:00:1c.0
[    0.299504]   IO window: 9000-9fff
[    0.299504]   MEM window: disabled.
[    0.299504]   PREFETCH window: disabled.
[    0.299504] PCI: Bridge: 0000:00:1c.4
[    0.299504]   IO window: b000-bfff
[    0.299504]   MEM window: 0xfa000000-0xfa0fffff
[    0.299504]   PREFETCH window: disabled.
[    0.299504] PCI: Bridge: 0000:00:1c.5
[    0.299504]   IO window: c000-cfff
[    0.299504]   MEM window: 0xf8000000-0xf9ffffff
[    0.299504]   PREFETCH window: 0x0000000080000000-0x00000000800fffff
[    0.299504] PCI: Bridge: 0000:00:1e.0
[    0.299504]   IO window: disabled.
[    0.299504]   MEM window: 0xfa100000-0xfa1fffff
[    0.299504]   PREFETCH window: disabled.
[    0.299504] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[    0.299504] PCI: Setting latency timer of device 0000:00:01.0 to 64
[    0.299504] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[    0.299504] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[    0.299504] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16
[    0.299504] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[    0.299504] ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 17
[    0.299504] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[    0.299504] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[    0.299504] NET: Registered protocol family 2
[    0.335124] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.335683] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[    0.335751] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.335751] TCP: Hash tables configured (established 262144 bind 65536)
[    0.335751] TCP reno registered
[    0.345720] NET: Registered protocol family 1
[    0.345819] checking if image is initramfs...<7>Switched to high resolution mode on CPU 1
[    0.509188] Switched to high resolution mode on CPU 0
[    0.547498]  it is
[    0.762820] Freeing initrd memory: 6528k freed
[    0.763463] audit: initializing netlink socket (disabled)
[    0.763463] type=2000 audit(1232651894.752:1): initialized
[    0.763463] Total HugeTLB memory allocated, 0
[    0.763463] VFS: Disk quotas dquot_6.5.1
[    0.763463] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.763463] msgmni has been set to 4027
[    0.763463] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.763463] io scheduler noop registered
[    0.763463] io scheduler anticipatory registered
[    0.763463] io scheduler deadline registered
[    0.763463] io scheduler cfq registered (default)
[    0.763463] pci 0000:01:00.0: Boot video device
[    0.763463] PCI: Setting latency timer of device 0000:00:01.0 to 64
[    0.763463] assign_interrupt_mode Found MSI capability
[    0.763463] Allocate Port Service[0000:00:01.0:pcie00]
[    0.763463] Allocate Port Service[0000:00:01.0:pcie03]
[    0.763463] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[    0.763463] assign_interrupt_mode Found MSI capability
[    0.763463] Allocate Port Service[0000:00:1c.0:pcie00]
[    0.763463] Allocate Port Service[0000:00:1c.0:pcie02]
[    0.763463] Allocate Port Service[0000:00:1c.0:pcie03]
[    0.763463] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[    0.763463] assign_interrupt_mode Found MSI capability
[    0.763463] Allocate Port Service[0000:00:1c.4:pcie00]
[    0.763463] Allocate Port Service[0000:00:1c.4:pcie02]
[    0.763464] Allocate Port Service[0000:00:1c.4:pcie03]
[    0.763464] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[    0.763464] assign_interrupt_mode Found MSI capability
[    0.763464] Allocate Port Service[0000:00:1c.5:pcie00]
[    0.763464] Allocate Port Service[0000:00:1c.5:pcie02]
[    0.763473] Allocate Port Service[0000:00:1c.5:pcie03]
[    0.767465] Linux agpgart interface v0.103
[    0.767465] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[    0.767465] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.767465] pnp: the driver 'serial' has been registered
[    0.767465] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.767465] serial 00:07: driver attached
[    0.767465] brd: module loaded
[    0.767465] input: Macintosh mouse button emulation as /class/input/input0
[    0.767465] pnp: the driver 'i8042 kbd' has been registered
[    0.767465] i8042 kbd 00:09: driver attached
[    0.767465] pnp: the driver 'i8042 aux' has been registered
[    0.767465] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    0.767465] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.767465] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.790401] mice: PS/2 mouse device common for all mice
[    0.791432] pnp: the driver 'rtc_cmos' has been registered
[    0.791484] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.791484] rtc0: alarms up to one month
[    0.791484] rtc_cmos 00:03: driver attached
[    0.791484] cpuidle: using governor ladder
[    0.791484] cpuidle: using governor menu
[    0.791484] No iBFT detected.
[    0.791484] TCP cubic registered
[    0.791484] NET: Registered protocol family 17
[    0.791484] registered taskstats version 1
[    0.791484] rtc_cmos 00:03: setting system clock to 2009-01-22 19:18:15 UTC (1232651895)
[    0.791484] Freeing unused kernel memory: 392k freed
[    0.811908] input: AT Translated Set 2 keyboard as /class/input/input1
[    0.847908] ACPI: ACPI0007:00 is registered as cooling_device0
[    0.847908] ACPI: Processor [CPU0] (supports 8 throttling states)
[    0.847908] ACPI: SSDT 7FEE8280, 0087 (r1  PmRef  Cpu1Ist     3000 INTL 20040311)
[    0.848313] ACPI: ACPI0007:01 is registered as cooling_device1
[    0.848313] ACPI: Processor [CPU1] (supports 8 throttling states)
[    0.954506] USB Universal Host Controller Interface driver v3.0
[    0.954536] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
[    0.954544] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[    0.954546] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    0.954645] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.954669] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000d100
[    0.954722] usb usb1: configuration #1 chosen from 1 choice
[    0.954742] hub 1-0:1.0: USB hub found
[    0.954745] hub 1-0:1.0: 2 ports detected
[    1.050430] No dock devices found.
[    1.050760] SCSI subsystem initialized
[    1.055076] libata version 3.00 loaded.
[    1.059514] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[    1.059516] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.059518] usb usb1: Product: UHCI Host Controller
[    1.059519] usb usb1: Manufacturer: Linux 2.6.26-1-amd64 uhci_hcd
[    1.059521] usb usb1: SerialNumber: 0000:00:1a.0
[    1.060551] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
[    1.060559] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[    1.060561] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    1.060597] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[    1.060622] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000d200
[    1.060673] usb usb2: configuration #1 chosen from 1 choice
[    1.060693] hub 2-0:1.0: USB hub found
[    1.060697] hub 2-0:1.0: 2 ports detected
[    1.135029] Floppy drive(s): fd0 is 1.44M
[    1.153760] FDC 0 is a post-1991 82077
[    1.163591] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.163594] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.163596] usb usb2: Product: UHCI Host Controller
[    1.163598] usb usb2: Manufacturer: Linux 2.6.26-1-amd64 uhci_hcd
[    1.163600] usb usb2: SerialNumber: 0000:00:1a.1
[    1.165681] ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 18 (level, low) -> IRQ 18
[    1.165695] PCI: Setting latency timer of device 0000:00:1a.2 to 64
[    1.165698] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    1.165729] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
[    1.165754] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000d000
[    1.165804] usb usb3: configuration #1 chosen from 1 choice
[    1.165824] hub 3-0:1.0: USB hub found
[    1.165828] hub 3-0:1.0: 2 ports detected
[    1.266606] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.266609] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.266611] usb usb3: Product: UHCI Host Controller
[    1.266613] usb usb3: Manufacturer: Linux 2.6.26-1-amd64 uhci_hcd
[    1.266614] usb usb3: SerialNumber: 0000:00:1a.2
[    1.266540] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
[    1.266540] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[    1.266540] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    1.266540] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 4
[    1.270643] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
[    1.270647] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfa205000
[    1.286541] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    1.286598] usb usb4: configuration #1 chosen from 1 choice
[    1.286622] hub 4-0:1.0: USB hub found
[    1.286627] hub 4-0:1.0: 6 ports detected
[    1.390406] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[    1.390409] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.390411] usb usb4: Product: EHCI Host Controller
[    1.390413] usb usb4: Manufacturer: Linux 2.6.26-1-amd64 ehci_hcd
[    1.390415] usb usb4: SerialNumber: 0000:00:1a.7
[    1.390336] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
[    1.390341] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[    1.390343] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.390375] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[    1.390395] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d300
[    1.390441] usb usb5: configuration #1 chosen from 1 choice
[    1.390459] hub 5-0:1.0: USB hub found
[    1.390463] hub 5-0:1.0: 2 ports detected
[    1.493830] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.493833] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.493835] usb usb5: Product: UHCI Host Controller
[    1.493836] usb usb5: Manufacturer: Linux 2.6.26-1-amd64 uhci_hcd
[    1.493838] usb usb5: SerialNumber: 0000:00:1d.0
[    1.497763] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[    1.497763] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[    1.497763] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.497763] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[    1.497763] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d400
[    1.497763] usb usb6: configuration #1 chosen from 1 choice
[    1.497763] hub 6-0:1.0: USB hub found
[    1.497763] hub 6-0:1.0: 2 ports detected
[    1.602836] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    1.602839] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.602841] usb usb6: Product: UHCI Host Controller
[    1.602843] usb usb6: Manufacturer: Linux 2.6.26-1-amd64 uhci_hcd
[    1.602845] usb usb6: SerialNumber: 0000:00:1d.1
[    1.606767] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[    1.606767] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[    1.606767] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.606767] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[    1.606767] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d500
[    1.606767] usb usb7: configuration #1 chosen from 1 choice
[    1.606767] hub 7-0:1.0: USB hub found
[    1.606767] hub 7-0:1.0: 2 ports detected
[    1.707503] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    1.707506] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.707508] usb usb7: Product: UHCI Host Controller
[    1.707510] usb usb7: Manufacturer: Linux 2.6.26-1-amd64 uhci_hcd
[    1.707512] usb usb7: SerialNumber: 0000:00:1d.2
[    1.710768] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
[    1.710768] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[    1.710768] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    1.710768] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8
[    1.714860] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[    1.714864] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfa204000
[    1.754758] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    1.754804] usb usb8: configuration #1 chosen from 1 choice
[    1.754829] hub 8-0:1.0: USB hub found
[    1.754834] hub 8-0:1.0: 6 ports detected
[    1.858887] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
[    1.858890] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.858892] usb usb8: Product: EHCI Host Controller
[    1.858894] usb usb8: Manufacturer: Linux 2.6.26-1-amd64 ehci_hcd
[    1.858896] usb usb8: SerialNumber: 0000:00:1d.7
[    1.862618] ata_piix 0000:00:1f.2: version 2.12
[    1.862630] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
[    1.862633] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    1.862664] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[    1.863309] scsi0 : ata_piix
[    1.863309] scsi1 : ata_piix
[    1.863309] ata1: SATA max UDMA/133 cmd 0xd600 ctl 0xd700 bmdma 0xda00 irq 19
[    1.863309] ata2: SATA max UDMA/133 cmd 0xd800 ctl 0xd900 bmdma 0xda08 irq 19
[    2.184215] usb 2-1: new low speed USB device using uhci_hcd and address 2
[    2.320163] usb 2-1: configuration #1 chosen from 1 choice
[    2.436155] usb 2-1: New USB device found, idVendor=0810, idProduct=0003
[    2.436155] usb 2-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    2.436155] usb 2-1: Product: USB Gamepad
[    2.456193] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.484154] ata1.00: HPA detected: current 781420655, native 781422768
[    2.484154] ata1.00: ATA-7: WDC WD4000AAKS-00TMA0, 12.01C01, max UDMA/133
[    2.484154] ata1.00: 781420655 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.500154] ata1.00: configured for UDMA/133
[    2.694129] usb 2-2: new low speed USB device using uhci_hcd and address 3
[    2.826834] ata2: SATA link down (SStatus 0 SControl 300)
[    2.830322] isa bounce pool size: 16 pages
[    2.830322] scsi 0:0:0:0: Direct-Access     ATA      WDC WD4000AAKS-0 12.0 PQ: 0 ANSI: 5
[    2.830822] ahci 0000:03:00.0: version 3.0
[    2.830822] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[    2.830322] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 19 (level, low) -> IRQ 19
[    2.830322] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    2.830322] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[    2.830322] scsi2 : ata_piix
[    2.830322] scsi3 : ata_piix
[    2.830322] ata3: SATA max UDMA/133 cmd 0xdd00 ctl 0xde00 bmdma 0xe100 irq 19
[    2.830322] ata4: SATA max UDMA/133 cmd 0xdf00 ctl 0xe000 bmdma 0xe108 irq 19
[    2.871421] usb 2-2: configuration #1 chosen from 1 choice
[    2.884367] usb 2-2: New USB device found, idVendor=0458, idProduct=003a
[    2.884370] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.884372] usb 2-2: Product: Optical Mouse
[    2.884373] usb 2-2: Manufacturer: Genius
[    2.884449] usbcore: registered new interface driver hiddev
[    2.907251] input: USB Gamepad  as /class/input/input2
[    2.907270] input,hidraw0: USB HID v1.10 Joystick [USB Gamepad ] on usb-0000:00:1a.1-1
[    2.922821] input: Genius Optical Mouse as /class/input/input3
[    2.934966] input,hidraw1: USB HID v1.10 Mouse [Genius Optical Mouse] on usb-0000:00:1a.1-2
[    2.934980] usbcore: registered new interface driver usbhid
[    2.934983] usbhid: v2.6:USB HID core driver
[    3.217452] ata3: SATA link down (SStatus 0 SControl 300)
[    3.546796] ata4: SATA link down (SStatus 0 SControl 300)
[    3.892999] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[    3.893002] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[    3.893008] PCI: Setting latency timer of device 0000:03:00.0 to 64
[    3.894840] scsi4 : ahci
[    3.894840] scsi5 : ahci
[    3.894840] ata5: SATA max UDMA/133 abar m8192@0xfa000000 port 0xfa000100 irq 16
[    3.894840] ata6: SATA max UDMA/133 abar m8192@0xfa000000 port 0xfa000180 irq 16
[    4.371584] ata5: SATA link down (SStatus 0 SControl 300)
[    4.706805] ata6: SATA link down (SStatus 0 SControl 300)
[    4.726785] r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
[    4.726785] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[    4.726785] PCI: Setting latency timer of device 0000:04:00.0 to 64
[    4.726785] eth0: RTL8168b/8111b at 0xffffc20000322000, 00:1a:4d:55:fa:11, XID 38000000 IRQ 1275
[    4.726785] ACPI: PCI Interrupt 0000:05:01.0[A] -> GSI 19 (level, low) -> IRQ 19
[    4.727274] Uniform Multi-Platform E-IDE driver
[    4.727274] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[    4.995449] ssb: Sonics Silicon Backplane found on PCI device 0000:05:01.0
[    4.995410] JMB: IDE controller (0x197b:0x2363 rev 0x02) at  PCI slot 0000:03:00.1
[    4.998733] ACPI: PCI Interrupt 0000:05:06.0[A] -> <6>JMicron IDE 0000:03:00.1: enabling device (0000 -> 0001)
[    4.998733] GSI 18 (level, low) -> IRQ 18
[    4.995410] ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 17 (level, low) -> IRQ 17
[    4.995410] JMB: 100% native mode on irq 17
[    4.995410] PCI: Setting latency timer of device 0000:03:00.1 to 64
[    4.995410]     ide0: BM-DMA at 0xb400-0xb407
[    4.995410]     ide1: BM-DMA at 0xb408-0xb40f
[    4.995410] Probing IDE interface ide0...
[    5.049026] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18]  MMIO=[fa106000-fa1067ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[    5.737264] hda: HL-DT-STDVD-RAM GSA-H55N, ATAPI CD/DVD-ROM drive
[    6.112977] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[    6.113182] hda: UDMA/66 mode selected
[    6.113388] Probing IDE interface ide1...
[    6.364940] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00c9f60100001a4d]
[    6.683671] ide0 at 0xb000-0xb007,0xb102 on irq 17
[    6.685840] ide1 at 0xb200-0xb207,0xb302 on irq 17
[    6.754413] Driver 'sd' needs updating - please use bus_type methods
[    6.754413] sd 0:0:0:0: [sda] 781420655 512-byte hardware sectors (400087 MB)
[    6.754413] sd 0:0:0:0: [sda] Write Protect is off
[    6.754413] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    6.754413] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    6.754413] sd 0:0:0:0: [sda] 781420655 512-byte hardware sectors (400087 MB)
[    6.754413] sd 0:0:0:0: [sda] Write Protect is off
[    6.754413] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    6.754413] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    6.754413]  sda:<6>hda: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
[    6.765869] Uniform CD-ROM driver Revision: 3.20
[    6.766413]  sda1 sda2 < sda5 sda6 > sda3 sda4
[    6.789985] sd 0:0:0:0: [sda] Attached SCSI disk
[    7.263974] PM: Starting manual resume from disk
[    7.303520] kjournald starting.  Commit interval 5 seconds
[    7.303520] EXT3-fs: mounted filesystem with ordered data mode.
[    8.380051] udevd version 125 started
[    9.087906] input: Power Button (FF) as /class/input/input4
[    9.144193] ACPI: Power Button (FF) [PWRF]
[    9.144236] input: Power Button (CM) as /class/input/input5
[    9.172351] ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 18
[    9.184003] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
[    9.184056] iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware
[    9.184145] iTCO_wdt: No card detected
[    9.205710] ACPI: Power Button (CM) [PWRB]
[    9.219097] input: PC Speaker as /class/input/input6
[    9.294766] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
[    9.294786] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[    9.303376] pnp: the driver 'parport_pc' has been registered
[    9.303391] parport_pc 00:08: reported by Plug and Play ACPI
[    9.303442] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[    9.326923] hda_codec: Unknown model for ALC882, trying auto-probe from BIOS...
[    9.397251] parport_pc 00:08: driver attached
[    9.433182] b43-phy0: Broadcom 4318 WLAN found
[    9.502380] phy0: Selected rate control algorithm 'pid'
[    9.581858] Broadcom 43xx driver loaded [ Features: PMLR, Firmware-ID: FW13 ]
[   10.797711] Adding 6080560k swap on /dev/sda6.  Priority:-1 extents:1 across:6080560k
[   11.172307] EXT3 FS on sda3, internal journal
[   11.855090] loop: module loaded
[   11.911616] ndiswrapper version 1.53 loaded (smp=yes, preempt=no)
[   11.942975] usbcore: registered new interface driver ndiswrapper
[   12.486352] NTFS driver 2.1.29 [Flags: R/W MODULE].
[   12.567951] NTFS volume version 3.1.
[   13.503503] kjournald starting.  Commit interval 5 seconds
[   13.503504] EXT3 FS on sda4, internal journal
[   13.503504] EXT3-fs: mounted filesystem with ordered data mode.
[   14.190626] input: b43-phy0 as /class/input/input7
[   14.296910] firmware: requesting b43/ucode5.fw
[   14.330123] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found or load failed.
[   14.330123] b43-phy0 ERROR: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the latest firmware (version 4).
[   14.386365] input: b43-phy0 as /class/input/input8
[   14.464456] firmware: requesting b43/ucode5.fw
[   14.466123] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found or load failed.
[   14.466123] b43-phy0 ERROR: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the latest firmware (version 4).
[   62.685591] lp0: using parport0 (interrupt-driven).
[   62.708657] ppdev: user-space parallel port driver
[   63.165157] NET: Registered protocol family 10
[   63.165157] lo: Disabled Privacy Extensions
[   64.142660] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[   65.882424] input: b43-phy0 as /class/input/input9
[   65.993672] firmware: requesting b43/ucode5.fw
[   65.995839] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found or load failed.
[   65.995996] b43-phy0 ERROR: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the latest firmware (version 4).
[   68.088687] r8169: eth0: link down
[   68.091024] ADDRCONF(NETDEV_UP): eth0: link is not ready
-----------------------
# dhclient wlan0
Internet Systems Consortium DHCP Client V3.1.1
Copyright 2004-2008 Internet Systems Consortium.
All rights reserved.
For info, please visit http://www.isc.org/sw/dhcp/

wmaster0: unknown hardware address type 801
SIOCSIFFLAGS: No such file or directory
SIOCSIFFLAGS: No such file or directory
wmaster0: unknown hardware address type 801
Listening on LPF/wlan0/00:1e:8c:22:f7:46
Sending on   LPF/wlan0/00:1e:8c:22:f7:46
Sending on   Socket/fallback
receive_packet failed on wlan0: Network is down
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 5
send_packet: Network is down
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 13
send_packet: Network is down
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 15
send_packet: Network is down
^C
-------------------------------------------------------------
# iwconfig
lo        no wireless extensions.

eth0      no wireless extensions.

wmaster0  no wireless extensions.

wlan0     IEEE 802.11  ESSID:"RouterWoolf" 
          Mode:Managed  Frequency:2.412 GHz  Access Point: Not-Associated  
          Tx-Power=0 dBm  
          Retry min limit:7   RTS thr:off   Fragment thr=2352 B  
          Encryption key:off
          Link Quality:0  Signal level:0  Noise level:0
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:0   Missed beacon:0
-----------------------------------------------------------------
# ndiswrapper -l
bcmwl5 : driver installed
    device (14E4:4318) present (alternate driver: ssb)
--------------------------------------------------------
# more /etc/modprobe.d/blacklist


# This file lists modules which will not be loaded as the result of
# alias expansion, with the purpose of preventing the hotplug subsystem
# to load them. It does not affect autoloading of modules by the kernel.
# This file is provided by the udev package.

#To sem pridal ja
blacklist bcm43xx
blacklist ssd

# evbug is a debug tool and should be loaded explicitly
blacklist evbug

# these drivers are very simple, the HID drivers are usually preferred
blacklist usbmouse
blacklist usbkbd

# replaced by e100
blacklist eepro100

# replaced by tulip
blacklist de4x5

# replaced by tmscsim
blacklist am53c974

# watchdog drivers should be loaded only if a watchdog daemon is installed
blacklist acquirewdt
blacklist advantechwdt
blacklist alim1535_wdt
blacklist alim7101_wdt
blacklist booke_wdt
blacklist cpu5wdt
blacklist eurotechwdt
blacklist i6300esb
blacklist i8xx_tco
blacklist ib700wdt
blacklist ibmasr
blacklist indydog
blacklist ixp2000_wdt
blacklist ixp4xx_wdt
blacklist machzwd
blacklist mixcomwd
blacklist mpc8xx_wdt
blacklist mpcore_wdt
blacklist mv64x60_wdt
blacklist pcwd
blacklist pcwd_pci
blacklist pcwd_usb
blacklist s3c2410_wdt
blacklist sa1100_wdt
blacklist sbc60xxwdt
blacklist sbc8360
blacklist sc1200wdt
blacklist sc520_wdt
blacklist scx200_wdt
blacklist shwdt
blacklist softdog
blacklist w83627hf_wdt
blacklist w83877f_wdt
blacklist w83977f_wdt
blacklist wafer5823wdt
blacklist wdt285
blacklist wdt977
blacklist wdt
blacklist wdt_pci

-----------------------------------------------------------------
#  iwlist scan
lo        Interface doesn't support scanning.

eth0      Interface doesn't support scanning.

wmaster0  Interface doesn't support scanning.

wlan0     Interface doesn't support scanning : Network is down
------------------------------------------------------------------
iwconfig wlan0 mode Managed essid RouterWoolf key heslo
Error for wireless request "Set Encode" (8B2A) :
    invalid argument "heslo".
------------------------------------------------------------------
Obsah /etc/modules:
# /etc/modules: kernel modules to load at boot time.
#
# This file contains the names of kernel modules that should be loaded
# at boot time, one per line. Lines beginning with "#" are ignored.
# Parameters can be specified after the module name.

loop
sbp2
ndiswrapper
-------------------------------------------------------------------
# more /etc/network/interfaces
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

# The loopback network interface
auto lo
iface lo inet loopback

iface wlan0 inet dhcp
wireless-key s:heslo
wireless-essid RouterWoolf



auto wlan0
---------------------------------------------------------------------
# tail /var/log/messages
Jan 22 19:19:17 debian dhcdbd: Started up.
Jan 22 19:19:19 debian kernel: [   65.882424] input: b43-phy0 as /class/input/input9
Jan 22 19:19:19 debian kernel: [   65.993672] firmware: requesting b43/ucode5.fw
Jan 22 19:19:21 debian kernel: [   68.088687] r8169: eth0: link down
Jan 22 19:19:21 debian kernel: [   68.091024] ADDRCONF(NETDEV_UP): eth0: link is not ready
Jan 22 19:21:50 debian kernel: [  223.409298] input: b43-phy0 as /class/input/input10
Jan 22 19:21:51 debian kernel: [  223.495023] firmware: requesting b43/ucode5.fw
Jan 22 19:21:51 debian kernel: [  223.553368] input: b43-phy0 as /class/input/input11
Jan 22 19:21:51 debian kernel: [  223.631919] firmware: requesting b43/ucode5.fw
Jan 22 19:28:50 debian kernel: [  666.510540] fuse init (API version 7.9)
----------------------------------------------------------------------
# ndiswrapper -m
module configuration already contains alias directive
-----------------------------------------------------------------------
#ifup wlan0
ifup: interface wlan0 already configured
----------------------------------------------------------------------
#  iwlist key
lo        no encryption keys information.

eth0      no encryption keys information.

wmaster0  no encryption keys information.

wlan0     2 key sizes : 40, 104bits
          4 keys available :
        [1]: off
        [2]: off
        [3]: off
        [4]: off
          Current Transmit Key: [1]
--------------------------------------------------------------------------

 

Odpovědi

[Robotics]

Nebude to tím že použivám windows xp driver a pritom mam amd64 debian?

[Jendа]

Nebude to tím že použivám windows xp driver a pritom mam amd64 debian?

IMHO ne, WinXP driver mi jel na 64bit Ubuntu.

[   65.995839] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found or load failed.
[   65.995996] b43-phy0 ERROR: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the latest firmware (version 4).

Co to zkusit?

[Robotics]

No zkusím to. Ale fakt nevím co mam zase vratit zpatky, jestli to vytahnout z blacklistu a jestli i z etc/modules a jestli i dat rmmod bcm5.inf či co???

[Robotics]

Tak sem to zkusil. A stale nefunguje. Du se zabít .

[filbar]

A proč nepoužiješ nativní ovladač pro Linux?

[Robotics]

To sem zkousel nefunguje to.

[vencour]

Můžeš zjistit, pod jakym modulem ta wifina jela v ubuntu? Jestli v ndiswrapperu nebo linux-native?

[Robotics]

pod ndiswrapprem. Taky sem to musel zprovoznit podle navodu na ubuntu.

[vencour]

Hm, to je blbý, já doufal, že tam bude ten nativní. S ndiswrapperem nemam zkušenost , kdybys chtěl češit B43, tak se ozvi ... měl jsi tam firmware?

[honzulak1]

Taky mám Broadcom 4318 v notebooku (HP nx6110) a nativní ovladač mi začal pořádně chodit až v jádře 2.6.28, takže zkusit aktualizovat.

[Jendа]

V Debianu je pořád .26, ale s úspěchem jsem provozoval Ubuntí jádro v Lennym. Akorát pozor na parametry při startu (root=???) a ve fstab, Ubuntí jádra by-default označují IDE disky také jako sd*, takže je potřeba si na to dát pozor.

[Přemek Jordák]

Myslim, ze bys mel blacklistnout modul ssb, ne ssd ;)

[Robotics]

ha! jestli to pomuze, tak se zblaznim.

[Robotics]

tak to nepomohlo. jedinym řešením bude koupit si wifi s nativní podporou v jádře linuxu. Posilejte tipy.

[petertomasy]

Podla mňa je chyba tu:

[ 9.433182] b43-phy0: Broadcom 4318 WLAN found

[ 9.502380] phy0: Selected rate control algorithm 'pid'

[ 9.581858] Broadcom 43xx driver loaded [ Features: PMLR, Firmware-ID: FW13 ]

Je tu snaha natiahnuť nativny driver b43:

[ 14.296910] firmware: requesting b43/ucode5.fw

pozri sa na "lsmod |grep b43"

alebo možno aj "lsmod |grep bcm"

či niesú natiahnuté natívne drivery

[Robotics]

To je mozny.. jdu namontovat obymky na zarovky a pak se mrknu na ty vypisi.. ja sem si taky rikal proc mi to sakra furt hlasi ze si mam z ty adresy stahnout ten driver kdyz uz sem tam davno mel ten ndsiwrapper.

[gogloid]

Zkus modprobe -r b43 b44 ssb ndiswrapper && modprobe ndiswrapper b44