Dotaz: DHCP - client default gw

[Punny]

Zdravim.
Mam dva DHCP servery nastavene ve failover peer - ten funguje bez problemu. Dale zde mam pro priklad 3 zony, ktere jsou nastavene identicky (az na rozsahy, atd) pro priklad:

# Project3 network
subnet 10.1.3.0 netmask 255.255.255.0
{
    pool
    {
        range 10.1.3.50 10.1.3.250;
        failover peer "dhcp-failover";
        option broadcast-address 10.1.3.255;
        option routers 10.1.3.1;
    }

        host DARKVADER
        {
                hardware ethernet 42:20:bf:57:35:55;
                fixed-address 10.1.3.10;
        }
}

zde je nastaveni serveru:

ddns-update-style none;
option domain-name "cz.local";
option domain-name-servers 10.4.10.11, 10.4.10.12;
default-lease-time 21600;
max-lease-time 43200;
authoritative;
log-facility local7;

failover peer "dhcp-failover" {
  primary;
  address 192.168.1.1;
  port 647;
  peer address 192.168.1.2;
  peer port 648;
  max-response-delay 30;
  max-unacked-updates 10;
  load balance max seconds 3;
  mclt 1800;
  split 128;
}

A zde nastava problem, host DARKVADER dostane adresu, dns, apod, ale default gw nikoliv. Nejzajimavejsi na tom je, ze pro zonu, dejme tomu Project1 (10.1.1.0/24), vse funguje bez problemu :)
Setkal se s tim nekdo? :) A jeste lepe nenapada nekoho cim to muze byt?
Diky vsem za napady
Punny

---

---

Odpovědi

[Punny]

Option 'routers 10.1.3.1' je definovane v poolu misto v subnetu. Staticka IP adresa hosta ale do daneho poolu nespada. Takze to ma byt pravdepodobne takto:

subnet 10.1.3.0 netmask 255.255.255.0 {
  option routers 10.1.3.1;
  pool {
        range 10.1.3.50 10.1.3.250
        ....

viz manual(adress pools)

[Punny]

Ano, napadlo me to az na ceste z prace, ze v tom bude ten hacek :D a ono tomu tak opravdu je :)