Administrace komentářů

00:07.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11)
   Subsystem: Pinnacle Systems Inc.: Unknown device 0012
        Flags: bus master, medium devsel, latency 32, IRQ 10
        Memory at dddfe000 (32-bit, prefetchable) [size=4K]
        Capabilities: [44] Vital Product Data
        Capabilities: [4c] Power Management version 2

00:07.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11)
        Subsystem: Pinnacle Systems Inc.: Unknown device 0012
        Flags: bus master, medium devsel, latency 32, IRQ 10
        Memory at dddff000 (32-bit, prefetchable) [size=4K]
        Capabilities: [44] Vital Product Data
        Capabilities: [4c] Power Management version 2

alias char-major-89 i2c-dev
options i2c-algo-bit bit_test=1
alias char-major-81-0 bttv
options bttv pll=1 radio=1 card=39 bttv_verbose=2
bttv_debug=1 irq_debug=1
options tuner type=3 debug=1
options tvmixer debug=1
options msp3400 debug=2
alias char-major-81-1 off
alias char-major-81-2 off
alias char-major-81-3 off

i2c-core.o: i2c core module version 2.6.4 (20020719)
i2c-isa.o version 2.6.4 (20020719)
i2c-core.o: adapter ISA main adapter registered as adapter 0.
i2c-isa.o: ISA bus access for i2c modules initialized.
i2c-proc.o version 2.6.4 (20020719)
eeprom.o version 2.6.4 (20020719)
i2c-core.o: driver EEPROM READER registered.
Linux video capture interface: v1.00
i2c-algo-bit.o: i2c bit algorithm module version 2.6.4 (20020719)
bttv: driver version 0.7.91 loaded
bttv: using 2 buffers with 2080k (4160k total) for capture
bttv: Host bridge is PCI device 1106:3099
bttv: Bt8xx card found (0).
bttv0: Bt878 (rev 17) at 00:07.0, irq: 10, latency: 32, memory: 0xdddfe000
bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is 11bd:0012
bttv0: using: BT878(Pinnacle PCTV Studio/Ra) [card=39,insmod option]
bttv0: irq loop=0 risc=0, bits: HSYNC OFLOW VPRES*   PRES => no
bttv0: irq loop=0 risc=0, bits: FMTCHG* VSYNC HSYNC OFLOW   NUML => 525
i2c-algo-bit.o: Adapter: bt848 #0 scl: 1  sda: 1 -- testing...
i2c-algo-bit.o:1 scl: 1  sda: 0
i2c-algo-bit.o:2 scl: 1  sda: 1
i2c-algo-bit.o:3 scl: 0  sda: 1
i2c-algo-bit.o:4 scl: 1  sda: 1
i2c-algo-bit.o: bt848 #0 passed test.
bttv0: i2c attach [client=EEPROM chip,ok]
i2c-core.o: client [EEPROM chip] registered to adapter [bt848 #0](pos. 0).
bttv0: i2c attach [client=EEPROM chip,ok]
i2c-core.o: client [EEPROM chip] registered to adapter [bt848 #0](pos. 1).
bttv0: i2c attach [client=EEPROM chip,ok]
i2c-core.o: client [EEPROM chip] registered to adapter [bt848 #0](pos. 2).
bttv0: i2c attach [client=EEPROM chip,ok]
i2c-core.o: client [EEPROM chip] registered to adapter [bt848 #0](pos. 3).
i2c-core.o: adapter bt848 #0 registered as adapter 1.
bttv0: i2c: checking for MSP34xx @ 0x80... found
bttv0: miro: id=30 tuner=4 radio=matchbox stereo=yes
bttv0: i2c: checking for MSP34xx @ 0x80... found
i2c-core.o: driver i2c msp3400 driver registered.
msp34xx: init: chip=MSP3410G-B11, has NICAM support
msp3410: daemon started
msp3410: thread: sleep
bttv0: i2c attach [client=MSP3410G-B11,ok]
i2c-core.o: client [MSP3410G-B11] registered to adapter [bt848 #0](pos. 4).
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
msp3410: thread: wakeup
tvaudio: TV audio decoder + audio/video mux driver
tvaudio: known chips: tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54 (PV951)
i2c-core.o: driver generic i2c audio driver registered.
i2c-core.o: driver i2c TV tuner driver registered.
tuner: ignoring ISA main adapter i2c adapter [id=0x50000]
tuner: probing bt848 #0 i2c adapter [id=0x10005]
tuner: chip found @ 0xc0
bttv0: i2c attach [client=Philips (SECAM+PAL_BG) (FI1216MF,ok]
i2c-core.o: client [Philips (SECAM+PAL_BG) (FI1216MF] registered to adapter [bt848 #0](pos. 5).
msp34xx: AUDC_SET_INPUT(4)
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: registered device radio0
bttv0: open called
msp34xx: VIDIOCGAUDIO
msp3410: setting mode: autodetect start (0x0001)
msp3410: detection still in progress
msp3410: detection still in progress
eth0: no IPv6 routers present
msp3410: current mode: ERROR (0x0000)
msp34xx: setbass: 32768 0x00
msp34xx: settreble: 32768 0x00
msp34xx: setvolume: mute=off 65535:65535  v=0x73 b=0x00
msp3410: thread: sleep
i2c-dev.o: i2c /dev entries driver module version 2.6.4 (20020719)
i2c-core.o: driver i2c-dev dummy driver registered.
i2c-dev.o: Registered 'ISA main adapter' as minor 0
i2c-dev.o: Registered 'bt848 #0' as minor 1

w83781d.o version 2.6.4 (20020719)
i2c-core.o: driver W83781D sensor driver registered.
i2c-core.o: client [W83697HF chip] registered to adapter [ISA main adapter](pos. 0).