Administrace komentářů

Moch sem to jeste vic rozvest, to je pravda :) Takze: mam jeden disk s windows a linuxem, potom sem do pocitace pripojil jeste jeden (cizi) - vše v pohodě, nabootoval sem do windows, zasuspendoval a odpojil cizi disk a zacaly problemy (neprohodil sem je rozdil mezi 2,5" a 3,5" je velkej). Ted normalne probehne detekce biosu a potom se snaží bootovat z disku po docela dlouhý době se objeví něco jako "Grub is loading please wait" po přibližně satejný době se objeví ještě něco a pak se po další podobný době teprv objeví tabulka grubu (parkrat mi v grubu nešla klavesnice, ale jadro pak bootuje normalne a windows asi taky a zapis/cteni z disku je taky v poho) BIOS mi disk detekuje správně, IDE kabel sem kontroloval, ten je OK, jinak hrdwarovou konfiguraci sem nemenil, bootovani je nastaveny rovnou na ten HDD a CD-Rom ani nemam takze tim to neni. Ještě dodám, že disk během těch dvou minut nedělá nic - nebliká IDE led., ale vubec a ani "nechrastí" prostě zabíjí čas. Všimnul sem si že partiton magic ve windows mi ukazuje misto struktury disku jednu neznamou partition velkou jako celej disk, predtim ukazoval normalne partitony, ktery se tam nachazi. Fdisk v linuxu to ukazuje spravne:

smajchl:/home/smajchl# fdisk -l
Disk /dev/hda: 200.0 GB, 200049647616 bytes
255 heads, 63 sectors/track, 24321 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Device Boot Start End Blocks Id System
/dev/hda1 1 1497 12024621 f W95 Ext'd (LBA)
/dev/hda2 1498 2103 4867695 83 Linux
/dev/hda3 * 2104 24321 178466085 7 HPFS/NTFS
/dev/hda5 1 829 6658879+ b W95 FAT32
/dev/hda6 830 1466 5116671 b W95 FAT32
/dev/hda7 1467 1497 248976 82 Linux swap / Solaris

SMART mi píše toto, ale nevyznam se v tom:

smajchl:/home/smajchl# smartctl -a /dev/hda
smartctl version 5.34 [i686-pc-linux-gnu] Copyright (C) 2002-5 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Caviar SE family
Device Model:     WDC WD2000JB-00GVA0
Serial Number:    WD-WCALL1073434
Firmware Version: 08.02D08
User Capacity:    200 049 647 616 bytes
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   6
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Mon Feb 27 15:56:16 2006 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x02) Offline data collection activity
                                        was completed without error.
                                        Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                 (5800) seconds.
Offline data collection
capabilities:                    (0x7b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        No General Purpose Logging support.
Short self-test routine
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        (  75) minutes.
Conveyance self-test routine
recommended polling time:        (   5) minutes.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   200   200   051    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0007   128   120   021    Pre-fail  Always       -       6133
  4 Start_Stop_Count        0x0032   100   100   040    Old_age   Always       -       837
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000b   199   199   051    Pre-fail  Always       -       53964
  9 Power_On_Hours          0x0032   097   097   000    Old_age   Always       -       2850
 10 Spin_Retry_Count        0x0013   100   100   051    Pre-fail  Always       -       0
 11 Calibration_Retry_Count 0x0013   100   100   051    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       762
194 Temperature_Celsius     0x0022   113   093   000    Old_age   Always       -       37
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0012   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0012   200   200   000    Old_age   Always       -       0
199 UDMA_CRC_Error_Count    0x000a   200   253   000    Old_age   Always       -       425
200 Multi_Zone_Error_Rate   0x0009   200   200   051    Pre-fail  Offline      -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Diky všem kdo se to snazí řešit.