Administrace komentářů

<4>Freeing unused kernel memory: 184k freed
<6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
<6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<5>SCSI subsystem initialized
<6>ICH7: IDE controller at PCI slot 0000:00:1f.1
<6>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 169
<6>ICH7: chipset revision 1
<6>ICH7: not 100% native mode: will probe irqs later
<6>    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
<7>Probing IDE interface ide0...
<4>hda: TSSTcorp CD-RW/DVD-ROM TS-H492C, ATAPI CD/DVD-ROM drive
<4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
<7>libata version 1.20 loaded.
<7>ata_piix 0000:00:1f.2: version 1.05
<7>ata_pci_init_one: pci_dev class+intf: 0x1018f
<7>ata_pci_init_one: NO_LEGACY == 0
<6>GSI 18 sharing vector 0xE1 and IRQ 18
<6>ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 20 (level, low) -> IRQ 225
<7>PCI: Setting latency timer of device 0000:00:1f.2 to 64
<6>ata1: PATA max UDMA/133 cmd 0xFE00 ctl 0xFE12 bmdma 0xFEC0 irq 225
<6>ata2: PATA max UDMA/133 cmd 0xFE20 ctl 0xFE32 bmdma 0xFEC8 irq 225
<7>ata1: dev 0 cfg 00:427a 49:2f00 82:746b 83:7f61 84:4163 85:7469 86:3e41 87:4163 88:207f 93:0000
<6>ata1: dev 0 ATA-7, max UDMA/133, 312500000 sectors: LBA48
<7>sata_get_dev_handle: SATA dev addr=0x1f0002, handle=0x0000000000000000
<7>ata1: dev 1 cfg 00:427a 49:2f00 82:746b 83:7f61 84:4163 85:7469 86:3e41 87:4163 88:207f 93:0000
<6>ata1: dev 1 ATA-7, max UDMA/133, 312500000 sectors: LBA48
<7>sata_get_dev_handle: SATA dev addr=0x1f0002, handle=0x0000000000000000
<6>ata1: dev 0 configured for UDMA/133
<6>ata1: dev 1 configured for UDMA/133
<7>sata_get_dev_handle: SATA dev addr=0x1f0002, handle=0x0000000000000000
<6>scsi0 : ata_piix
<3>ata2: disabling port
<6>scsi1 : ata_piix
<5>  Vendor: ATA       Model: WDC WD1600YS-18S  Rev: 20.0
<5>  Type:   Direct-Access                      ANSI SCSI revision: 05
<5>SCSI device sda: 312500000 512-byte hdwr sectors (160000 MB)
<5>sda: Write Protect is off
<7>sda: Mode Sense: 00 3a 00 00
<5>SCSI device sda: drive cache: write back
<5>SCSI device sda: 312500000 512-byte hdwr sectors (160000 MB)
<5>sda: Write Protect is off
<7>sda: Mode Sense: 00 3a 00 00
<5>SCSI device sda: drive cache: write back
<6> sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
<5>sd 0:0:0:0: Attached scsi disk sda
<5>  Vendor: ATA       Model: WDC WD1600YS-18S  Rev: 20.0
<5>  Type:   Direct-Access                      ANSI SCSI revision: 05
<5>sd 0:0:0:0: Attached scsi generic sg0 type 0
<5>SCSI device sdb: 312500000 512-byte hdwr sectors (160000 MB)
<5>sdb: Write Protect is off
<7>sdb: Mode Sense: 00 3a 00 00
<5>SCSI device sdb: drive cache: write back
<5>SCSI device sdb: 312500000 512-byte hdwr sectors (160000 MB)
<5>sdb: Write Protect is off
<7>sdb: Mode Sense: 00 3a 00 00
<5>SCSI device sdb: drive cache: write back
<6> sdb: sdb1
<5>sd 0:0:1:0: Attached scsi disk sdb
<5>sd 0:0:1:0: Attached scsi generic sg1 type 0
<7>Hotpluggable processor device is not present
<7>Hotpluggable processor device is not present
<6>device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com
<7>dm-netlink version 0.0.2 loaded
<6>BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
<7>Losing some ticks... checking if CPU frequency changed.
<4>Attempting manual resume
<5>ReiserFS: dm-1: found reiserfs format "3.6" with standard journal
<5>ReiserFS: dm-1: using ordered data mode
<4>reiserfs: using flush barriers