Administrace komentářů

Dobrý den,

mám problém s jedním HDD, který pod windows nedovolí nabootovat ani když není bootovací, ale v linux v pohodě naběhne, když si pak dám vypsat zařízení, jsou tam zjevné errory. Chtěl bych se tedy zeptat, jestli je čistě teoreticky možné na něj nějak vlézt a udělat zálohu dat.

Přikládám výpis dmesg | grep ata

[    0.000000]  BIOS-e820: 000000003def3000 - 000000003df00000 (ACPI data)
[    0.000000] PERCPU: Allocating 34656 bytes of per cpu data
[   77.594142] Memory: 987424k/1014720k available (2490k kernel code, 26908k reserved, 1318k data, 320k init)
[   78.807517] Write protecting the kernel read-only data: 1036k
[   80.586043] libata version 3.00 loaded.
[   81.366604] pata_amd 0000:00:0d.0: version 0.3.10
[   81.368791] scsi0 : pata_amd
[   81.370039] scsi1 : pata_amd
[   81.370656] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf400 irq 14
[   81.370658] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf408 irq 15
[   81.854170] ata1.00: ATAPI: CD-W540E, 1.0F, max UDMA/33
[   81.854182] ata1.01: ATAPI: HL-DT-ST DVDRAM GSA-4160B, A302, max UDMA/66
[   82.026083] ata1.00: configured for UDMA/33
[   82.198039] ata1.01: configured for UDMA/66
[   82.409290] ata2.00: ATA-7: ST3160812A, 2AAA, max UDMA/100
[   82.409293] ata2.00: 312581808 sectors, multi 1: LBA48
[   82.475832] ata2.00: configured for UDMA/100
[   82.481689] sata_nv 0000:00:0e.0: version 3.5
[   82.482792] scsi2 : sata_nv
[   82.483050] scsi3 : sata_nv
[   82.483211] ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xe000 irq 20
[   82.483214] ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xe008 irq 20
[   82.949733] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   82.957344] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
[   82.957346] ata2.00: BMDMA stat 0x64
[   82.957351] ata2.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[   82.957354] ata2.00: status: { DRDY ERR }
[   82.957355] ata2.00: error: { ICRC ABRT }
[   82.957372] ata2: soft resetting link
[   82.957955] ata3.00: ATA-7: WDC WD2500KS-00MJB0, 02.01C03, max UDMA/133
[   82.957957] ata3.00: 488397168 sectors, multi 1: LBA48
[   82.965962] ata3.00: configured for UDMA/133
[   83.232771] ata2.00: configured for UDMA/100
[   83.232778] ata2: EH complete
[   83.277681] ata4: SATA link down (SStatus 0 SControl 300)
[   83.290117] scsi4 : sata_nv
[   83.290242] scsi5 : sata_nv
[   83.290401] ata5: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xcc00 irq 23
[   83.290404] ata6: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xcc08 irq 23
[   83.601643] ata5: SATA link down (SStatus 0 SControl 300)
[   83.697647] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
[   83.697650] ata2.00: BMDMA stat 0x64
[   83.697655] ata2.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[   83.697658] ata2.00: status: { DRDY ERR }
[   83.697659] ata2.00: error: { ICRC ABRT }
[   83.697674] ata2: soft resetting link
[   83.921603] ata6: SATA link down (SStatus 0 SControl 300)
[   83.973083] ata2.00: configured for UDMA/100
[   83.973097] ata2: EH complete
[   84.437951] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
[   84.437954] ata2.00: BMDMA stat 0x64
[   84.437958] ata2.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[   84.437961] ata2.00: status: { DRDY ERR }
[   84.437963] ata2.00: error: { ICRC ABRT }
[   84.437980] ata2: soft resetting link
[   84.721701] ata2.00: configured for UDMA/100
[   84.721708] ata2: EH complete
[   85.186572] ata2.00: limiting speed to UDMA/66:PIO4
[   85.186575] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
[   85.186577] ata2.00: BMDMA stat 0x64
[   85.186580] ata2.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[   85.186583] ata2.00: status: { DRDY ERR }
[   85.186585] ata2.00: error: { ICRC ABRT }
[   85.186598] ata2: soft resetting link
[   85.462008] ata2.00: configured for UDMA/66
[   85.462014] ata2: EH complete
[   85.963448] EXT3-fs: mounted filesystem with ordered data mode.
 

Předem díky za všechny rady a odpovědi.