Administrace komentářů

Nazdar,

Hrál jsem si s rozlišením obrazovky při hraní Regnum Online, ale samo se to vyplo a rozhodilo mi to rozlišení gnome. Když jsem restartoval X tak přestalo fungovat GLX a nastavilo se mi rozlišení na 1024x768 :/ a navíc pokaždé když pustím cokoliv co glx využivá, třeba jen glxinfo tak se mi restaruje Xko a do logu se přidá:
Fatal server error:
Caught signal 11.  Server aborting

Grafickou kartu mam GeForce4 (nVidia Corporation NV17 [GeForce4 MX 440] (rev a3)), ovladače (kmod-nvidia-96xx) jsem zkoušel přeinstalovat, ale nepomohlo to, nemůžu přijít na to jak GLX přeinstalovat.

Díky za jakoukoliv radu

/var/log/Xorg.0.log:

X.Org X Server 1.5.3
Release Date: 5 November 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.18-92.1.18.el5 i686
Current Operating System: Linux pc.loc 2.6.27.12-170.2.5.fc10.i686 #1 SMP Wed Jan 21 02:09:37 EST 2009 i686
Build Date: 11 December 2008  05:27:37PM
Build ID: xorg-x11-server 1.5.3-6.fc10
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Feb  1 19:47:27 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "single head configuration"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Device0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Mouse0"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) Including the default font path catalogue:/etc/X11/fontpath.d,built-ins.
(**) FontPath set to:
    /usr/share/fonts/default/Type1,
    catalogue:/etc/X11/fontpath.d,
    built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd' or 'mouse' will be disabled.
(WW) Disabling Keyboard0
(WW) Disabling Mouse0
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x81f4400
(II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 4.1
    X.Org XInput driver : 2.1
    X.Org Server Extension : 1.1
    X.Org Font Renderer : 0.6
(II) Loader running on linux
(++) using VT number 1

(--) PCI: (0@0:9:0) Brooktree Corporation Bt878 Video Capture rev 17, Mem @ 0xee800000/0
(--) PCI:*(0@1:0:0) nVidia Corporation NV17 [GeForce4 MX 440] rev 163, Mem @ 0xe7000000/0, 0xf0000000/0, 0xef800000/0, BIOS @ 0x????????/131072
(II) System resource ranges:
    [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[B]
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[B]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[B]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [4] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[B]
    [5] -1    0    0x00000000 - 0x00000000 (0x1) IX[B]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded by default.
(II) LoadModule: "dbe"

(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"

(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 1.1
(II) Loading extension SELinux
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"

(WW) Warning, couldn't open module type1
(II) UnloadModule: "type1"
(EE) Failed to load module "type1" (module does not exist, 0)
(II) LoadModule: "freetype"

(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
    compiled for 1.5.3, module version = 2.1.0
    Module class: X.Org Font Renderer
    ABI class: X.Org Font Renderer, version 0.6
(II) Loading font FreeType
(II) LoadModule: "glx"

(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    ABI class: X.Org Server Extension, version 1.1
(==) AIGLX enabled
(==) Exporting typical set of GLX visuals
(II) Loading extension GLX
(II) LoadModule: "dri"

(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    ABI class: X.Org Server Extension, version 1.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "nvidia"

(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
    compiled for 4.0.2, module version = 1.0.0
    Module class: X.Org Video Driver
(II) NVIDIA dlloader X Driver  96.43.09  Mon Oct 27 14:25:40 PST 2008
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"

(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"

(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.2.0
    ABI class: X.Org Video Driver, version 4.1
(II) resource ranges after probing:
    [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[B]
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[B]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[B]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [4] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[B]
    [5] -1    0    0x00000000 - 0x00000000 (0x1) IX[B]
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Enabling RENDER acceleration
(EE) NVIDIA(0): Failed to initialize the GLX module; please check in your X
(EE) NVIDIA(0):     log file that the GLX module has been loaded in your X
(EE) NVIDIA(0):     server, and that the module is the NVIDIA GLX module.  If
(EE) NVIDIA(0):     you continue to encounter problems, Please try
(EE) NVIDIA(0):     reinstalling the NVIDIA driver.
(II) NVIDIA(0): NVIDIA GPU GeForce4 MX 440 at PCI:1:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 65536 kBytes
(--) NVIDIA(0): VideoBIOS: 04.17.00.24.00
(II) NVIDIA(0): Detected AGP rate: 4X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce4 MX 440 at PCI:1:0:0:
(--) NVIDIA(0):     Samsung S/M 1100p+ (CRT-0)
(--) NVIDIA(0): Samsung S/M 1100p+ (CRT-0): 350.0 MHz maximum pixel clock
(II) NVIDIA(0): Assigned Display Device: CRT-0
(WW) NVIDIA(0):
(WW) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
(WW) NVIDIA(0):     will be used as the requested mode.
(WW) NVIDIA(0):
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0):     "nvidia-auto-select"
(II) NVIDIA(0): Virtual screen size determined to be 1600 x 1200
(--) NVIDIA(0): DPI set to (101, 101); computed from "UseEdidDpi" X config
(--) NVIDIA(0):     option
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
    [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[B]
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[B]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[B]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [4] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[B]
    [5] -1    0    0x00000000 - 0x00000000 (0x1) IX[B]
(II) NVIDIA(0): Initialized GART.
(II) NVIDIA(0): Setting mode "nvidia-auto-select"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(**) Option "dpms"
(**) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) config/hal: Adding input device Power Button (CM)
(II) LoadModule: "evdev"

(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 2.1.0
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 2.1
(**) Power Button (CM): always reports core events
(**) Power Button (CM): Device: "/dev/input/event1"
(II) Power Button (CM): Found keys
(II) Power Button (CM): Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button (CM)" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Power Button (CM): xkb_rules: "evdev"
(**) Option "xkb_model" "pc105"
(**) Power Button (CM): xkb_model: "pc105"
(**) Option "xkb_layout" "us,cz"
(**) Power Button (CM): xkb_layout: "us,cz"
(**) Option "xkb_options" "grp:shifts_toggle,grp_led:scroll"
(**) Power Button (CM): xkb_options: "grp:shifts_toggle,grp_led:scroll"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event2"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(II) config/hal: Adding input device Chicony USB Wireless HID Receiver
(**) Chicony USB Wireless HID Receiver: always reports core events
(**) Chicony USB Wireless HID Receiver: Device: "/dev/input/event4"
(II) Chicony USB Wireless HID Receiver: Found 8 mouse buttons
(II) Chicony USB Wireless HID Receiver: Found keys
(II) Chicony USB Wireless HID Receiver: Configuring as keyboard
(**) Chicony USB Wireless HID Receiver: YAxisMapping: buttons 4 and 5
(**) Chicony USB Wireless HID Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Chicony USB Wireless HID Receiver" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Chicony USB Wireless HID Receiver: xkb_rules: "evdev"
(**) Option "xkb_model" "pc105"
(**) Chicony USB Wireless HID Receiver: xkb_model: "pc105"
(**) Option "xkb_layout" "us,cz"
(**) Chicony USB Wireless HID Receiver: xkb_layout: "us,cz"
(**) Option "xkb_options" "grp:shifts_toggle,grp_led:scroll"
(**) Chicony USB Wireless HID Receiver: xkb_options: "grp:shifts_toggle,grp_led:scroll"
(II) config/hal: Adding input device Chicony USB Wireless HID Receiver
(**) Chicony USB Wireless HID Receiver: always reports core events
(**) Chicony USB Wireless HID Receiver: Device: "/dev/input/event3"
(II) Chicony USB Wireless HID Receiver: Found keys
(II) Chicony USB Wireless HID Receiver: Configuring as keyboard
(II) XINPUT: Adding extended input device "Chicony USB Wireless HID Receiver" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Chicony USB Wireless HID Receiver: xkb_rules: "evdev"
(**) Option "xkb_model" "pc105"
(**) Chicony USB Wireless HID Receiver: xkb_model: "pc105"
(**) Option "xkb_layout" "us,cz"
(**) Chicony USB Wireless HID Receiver: xkb_layout: "us,cz"
(**) Option "xkb_options" "grp:shifts_toggle,grp_led:scroll"
(**) Chicony USB Wireless HID Receiver: xkb_options: "grp:shifts_toggle,grp_led:scroll"
(II) config/hal: Adding input device Power Button (FF)
(**) Power Button (FF): always reports core events
(**) Power Button (FF): Device: "/dev/input/event0"
(II) Power Button (FF): Found keys
(II) Power Button (FF): Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button (FF)" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Power Button (FF): xkb_rules: "evdev"
(**) Option "xkb_model" "pc105"
(**) Power Button (FF): xkb_model: "pc105"
(**) Option "xkb_layout" "us,cz"
(**) Power Button (FF): xkb_layout: "us,cz"
(**) Option "xkb_options" "grp:shifts_toggle,grp_led:scroll"
(**) Power Button (FF): xkb_options: "grp:shifts_toggle,grp_led:scroll"
(II) config/hal: Adding input device Microsoft Basic Optical Mouse
(**) Microsoft Basic Optical Mouse: always reports core events
(**) Microsoft Basic Optical Mouse: Device: "/dev/input/event6"
(II) Microsoft Basic Optical Mouse: Found 3 mouse buttons
(II) Microsoft Basic Optical Mouse: Found x and y relative axes
(II) Microsoft Basic Optical Mouse: Configuring as mouse
(**) Microsoft Basic Optical Mouse: YAxisMapping: buttons 4 and 5
(**) Microsoft Basic Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Microsoft Basic Optical Mouse" (type: MOUSE)
(II) config/hal: Adding input device Chicony USB Wireless HID Receiver
(**) Chicony USB Wireless HID Receiver: always reports core events
(**) Chicony USB Wireless HID Receiver: Device: "/dev/input/event5"
(II) Chicony USB Wireless HID Receiver: Found 3 mouse buttons
(II) Chicony USB Wireless HID Receiver: Found x and y relative axes
(II) Chicony USB Wireless HID Receiver: Configuring as mouse
(**) Chicony USB Wireless HID Receiver: YAxisMapping: buttons 4 and 5
(**) Chicony USB Wireless HID Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Chicony USB Wireless HID Receiver" (type: MOUSE)
(II) NVIDIA(0): Setting mode "1024x768"

/etc/X11/xorg.conf:

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 1.0  (buildmeister@builder57)  Mon Oct 27 14:37:20 PST 2008

# Xorg configuration created by system-config-display

Section "ServerLayout"
    Identifier     "single head configuration"
    Screen      0  "Screen0" 0 0
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
EndSection

Section "Files"
    FontPath        "/usr/share/fonts/default/Type1"
EndSection

Section "Module"
    Load           "dbe"
    Load           "extmod"
    Load           "type1"
    Load           "freetype"
    Load           "glx"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/input/mice"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"

    # generated from data in "/etc/sysconfig/keyboard"
    Identifier     "Keyboard0"
    Driver         "kbd"
    Option         "XkbLayout" "cz,us"
    Option         "XkbModel" "pc105"
    Option         "XkbOptions" "grp:shift_toggle,grp_led:scroll"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "Unknown"
    HorizSync       30.0 - 110.0
    VertRefresh     50.0 - 150.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    SubSection     "Display"
        Viewport    0 0
        Depth       24
    EndSubSection
EndSection