Administrace komentářů

Ano, sytém běží celou dobu bez restartu.

Disky jsou na separátních kanálech řadiče ( ide disky na SiI680: IDE controller at PCI ... )

-----------------------

SiI680: chipset revision 2
SiI680: BASE CLOCK == 133
SiI680: 100% native mode on irq 177
    ide0: MMIO-DMA , BIOS settings: hda:pio, hdb:pio
    ide1: MMIO-DMA , BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
hda: IC35L090AVV207-0, ATA DISK drive
ide0 at 0xf8802080-0xf8802087,0xf880208a on irq 177
Probing IDE interface ide1...
hdc: IC35L090AVV207-0, ATA DISK drive
ide1 at 0xf88020c0-0xf88020c7,0xf88020ca on irq 177
 

-----------------------

Spustil jsem " smartctl -a /dev/hda " -  výsledek je, jestli to správně interpretuji, že disk má, předsi jen, vadné sektory ? ( Error: UNC 56 sectors at LBA  ... atd. )

To by mě zajímalo, proč ta utilita nic nenašla , případně se situace stále zhoršuje.....  No jdu udělat zálohu, o ty konfigurace bych nerad přišel ...

[root@nagios ~]# smartctl -a /dev/hda
smartctl version 5.36 [i686-redhat-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Model Family:     IBM/Hitachi Deskstar GXP-180 family
Device Model:     IC35L090AVV207-0
Serial Number:    VNVC02G3GJEY6T
Firmware Version: V23OA69A
User Capacity:    80,000,000,000 bytes
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   6
ATA Standard is:  ATA/ATAPI-6 T13 1410D revision 3a
Local Time is:    Mon Mar  2 12:01:39 2009 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x84) Offline data collection activity
                                        was suspended by an interrupting command from host.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                 (2153) seconds.
Offline data collection
capabilities:                    (0x1b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        No Conveyance Self-test supported.
                                        No Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        (  36) minutes.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   088   088   060    Pre-fail  Always       -       2097207
  2 Throughput_Performance  0x0005   100   100   050    Pre-fail  Offline      -       233
  3 Spin_Up_Time            0x0007   112   112   024    Pre-fail  Always       -       225 (Average 266)
  4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       72
  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       2
  7 Seek_Error_Rate         0x000b   100   100   067    Pre-fail  Always       -       0
  8 Seek_Time_Performance   0x0005   121   121   000    Pre-fail  Offline      -       38
  9 Power_On_Hours          0x0012   096   096   000    Old_age   Always       -       29086
 10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       66
192 Power-Off_Retract_Count 0x0032   100   100   050    Old_age   Always       -       386
193 Load_Cycle_Count        0x0012   100   100   050    Old_age   Always       -       386
194 Temperature_Celsius     0x0002   229   229   000    Old_age   Always       -       24 (Lifetime Min/Max 18/39)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       2
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       0

SMART Error Log Version: 1
ATA Error Count: 830 (device log contains only the most recent five errors)
        CR = Command Register [HEX]
        FR = Features Register [HEX]
        SC = Sector Count Register [HEX]
        SN = Sector Number Register [HEX]
        CL = Cylinder Low Register [HEX]
        CH = Cylinder High Register [HEX]
        DH = Device/Head Register [HEX]
        DC = Device Command Register [HEX]
        ER = Error register [HEX]
        ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 830 occurred at disk power-on lifetime: 27912 hours (1163 days + 0 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 01 e0 00 ea ef

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  fe a2 01 e0 00 0a e0 02      00:04:14.300  [VENDOR SPECIFIC]
  fe a1 00 00 00 00 a0 02      00:04:14.300  [VENDOR SPECIFIC]
  fe a6 50 60 eb c0 a0 02      00:04:14.100  [VENDOR SPECIFIC]
  fe a6 50 60 eb c0 a0 02      00:04:14.000  [VENDOR SPECIFIC]
  fe a6 50 60 eb c0 a0 02      00:04:13.900  [VENDOR SPECIFIC]

Error 829 occurred at disk power-on lifetime: 27912 hours (1163 days + 0 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 01 e0 00 ea ef

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  fe a2 01 e0 00 0a e0 02      00:01:50.900  [VENDOR SPECIFIC]
  fe a1 00 00 00 00 a0 02      00:01:50.900  [VENDOR SPECIFIC]
  fe a6 50 60 eb c0 a1 02      00:01:50.700  [VENDOR SPECIFIC]
  fe a6 50 60 eb c0 a1 02      00:01:50.600  [VENDOR SPECIFIC]
  fe a6 50 60 eb c0 a1 02      00:01:50.400  [VENDOR SPECIFIC]

Error 828 occurred at disk power-on lifetime: 27910 hours (1162 days + 22 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 63 b5 1d 6b e0  Error: UNC 99 sectors at LBA = 0x006b1db5 = 7019957

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 78 a0 1d 6b e0 00      00:15:29.100  READ DMA EXT
  25 00 80 98 1d 6b e0 00      00:15:20.700  READ DMA EXT
  25 00 80 18 1d 6b e0 00      00:15:20.400  READ DMA EXT
  25 00 80 98 1c 6b e0 00      00:15:20.400  READ DMA EXT
  25 00 80 18 1c 6b e0 00      00:15:20.400  READ DMA EXT

Error 827 occurred at disk power-on lifetime: 27910 hours (1162 days + 22 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 63 b5 1d 6b e0  Error: UNC 99 sectors at LBA = 0x006b1db5 = 7019957

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 80 98 1d 6b e0 00      00:15:20.700  READ DMA EXT
  25 00 80 18 1d 6b e0 00      00:15:20.400  READ DMA EXT
  25 00 80 98 1c 6b e0 00      00:15:20.400  READ DMA EXT
  25 00 80 18 1c 6b e0 00      00:15:20.400  READ DMA EXT
  25 00 80 98 1b 6b e0 00      00:15:20.400  READ DMA EXT

Error 826 occurred at disk power-on lifetime: 27909 hours (1162 days + 21 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 38 e0 7c 66 e0  Error: UNC 56 sectors at LBA = 0x00667ce0 = 6716640

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 70 a8 7c 66 e0 00      00:12:19.200  READ DMA EXT
  25 00 78 a0 7c 66 e0 00      00:12:12.800  READ DMA EXT
  25 00 80 98 7c 66 e0 00      00:12:06.500  READ DMA EXT
  25 00 80 18 7c 66 e0 00      00:12:06.200  READ DMA EXT
  25 00 80 98 7b 66 e0 00      00:12:06.200  READ DMA EXT

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%     27912         -
# 2  Extended offline    Completed without error       00%         0         -

Device does not support Selective Self Tests/Logging