Administrace komentářů

PCI: PCI BIOS revision 2.10 entry at 0xfb9f0, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 00:1f.1
Transparent bridge - Intel Corp. 82801BA/CA/DB/EB PCI Bridge
PCI: Using IRQ router PIIX/ICH [8086/24d0] at 00:1f.0
PCI: Found IRQ 9 for device 00:1f.1
PCI: Sharing IRQ 9 with 00:1d.2
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
Detected PS/2 Mouse Port.
pty: 2048 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS0 at 0x03f8 (irq = 4) is a 16550A
ttyS1 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10e
NET4: Frame Diverter 0.46
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH5: IDE controller at PCI slot 00:1f.1
PCI: Found IRQ 9 for device 00:1f.1
PCI: Sharing IRQ 9 with 00:1d.2
ICH5: chipset revision 2
ICH5: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:pio
hda: C/H/S=30/1/0 from BIOS ignored
hda: ST340014A, ATA DISK drive
blk: queue c0400f40, I/O limit 4095Mb (mask 0xffffffff)
hdc: ST340014A, ATA DISK drive
blk: queue c040139c, I/O limit 4095Mb (mask 0xffffffff)
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=4865/255/63, UDMA(100)
hdc: attached ide-disk driver.
hdc: host protected area => 1
hdc: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=4865/255/63, UDMA(100)
Partition check:
 hda: hda1 hda2 hda3
 hdc: hdc1 hdc2 hdc3
ide: late registration of driver.
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
 [events: 0000008e]
 [events: 0000008e]
 [events: 0000008e]
 [events: 0000008e]
 [events: 0000008e]
 [events: 0000008e]
md: autorun ...
md: considering hdc3 ...
md:  adding hdc3 ...
md:  adding hda3 ...
md: created md2
md: bind<hda3,1>
md: bind<hdc3,2>
md: running: <hdc3><hda3>
md: hdc3's event counter: 0000008e
md: hda3's event counter: 0000008e
md: RAID level 1 does not need chunksize! Continuing anyway.
kmod: failed to exec /sbin/modprobe -s -k md-personality-3, errno = 2
md: personality 3 is not loaded!
md :do_md_run() returned -22
md: md2 stopped.
md: unbind<hdc3,1>
md: export_rdev(hdc3)
md: unbind<hda3,0>
md: export_rdev(hda3)
md: considering hdc2 ...
md:  adding hdc2 ...
md:  adding hda2 ...
md: created md1
md: bind<hda2,1>
md: bind<hdc2,2>
md: running: <hdc2><hda2>
md: hdc2's event counter: 0000008e
md: hda2's event counter: 0000008e
md: RAID level 1 does not need chunksize! Continuing anyway.
kmod: failed to exec /sbin/modprobe -s -k md-personality-3, errno = 2
md: personality 3 is not loaded!
md :do_md_run() returned -22
md: md1 stopped.
md: unbind<hdc2,1>
md: export_rdev(hdc2)
md: unbind<hda2,0>
md: export_rdev(hda2)
md: considering hdc1 ...
md:  adding hdc1 ...
md:  adding hda1 ...
md: created md0
md: bind<hda1,1>
md: bind<hdc1,2>
md: running: <hdc1><hda1>
md: hdc1's event counter: 0000008e
md: hda1's event counter: 0000008e
md: RAID level 1 does not need chunksize! Continuing anyway.
kmod: failed to exec /sbin/modprobe -s -k md-personality-3, errno = 2
md: personality 3 is not loaded!
md :do_md_run() returned -22
md: md0 stopped.
md: unbind<hdc1,1>
md: export_rdev(hdc1)
md: unbind<hda1,0>
md: export_rdev(hda1)
md: ... autorun DONE.
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 169k freed
VFS: Mounted root (ext2 filesystem).
md: raid1 personality registered as nr 3
Journalled Block Device driver loaded
md: Autodetecting RAID arrays.
 [events: 0000008e]
 [events: 0000008e]
 [events: 0000008e]
 [events: 0000008e]
 [events: 0000008e]
 [events: 0000008e]
md: autorun ...
md: considering hda1 ...
md:  adding hda1 ...
md:  adding hdc1 ...
md: created md0
md: bind<hdc1,1>
md: bind<hda1,2>
md: running: <hda1><hdc1>
md: hda1's event counter: 0000008e
md: hdc1's event counter: 0000008e
md: RAID level 1 does not need chunksize! Continuing anyway.
md0: max total readahead window set to 124k
md0: 1 data-disks, max readahead per data-disk: 124k
raid1: device hda1 operational as mirror 0
raid1: device hdc1 operational as mirror 1
raid1: raid set md0 active with 2 out of 2 mirrors
md: updating md0 RAID superblock on device
md: hda1 [events: 0000008f]<6>(write) hda1's sb offset: 7164864
md: hdc1 [events: 0000008f]<6>(write) hdc1's sb offset: 7164864
md: considering hda2 ...
md:  adding hda2 ...
md:  adding hdc2 ...
md: created md1
md: bind<hdc2,1>
md: bind<hda2,2>
md: running: <hda2><hdc2>
md: hda2's event counter: 0000008e
md: hdc2's event counter: 0000008e
md: RAID level 1 does not need chunksize! Continuing anyway.
md1: max total readahead window set to 124k
md1: 1 data-disks, max readahead per data-disk: 124k
raid1: device hda2 operational as mirror 0
raid1: device hdc2 operational as mirror 1
raid1: raid set md1 active with 2 out of 2 mirrors
md: updating md1 RAID superblock on device
md: hda2 [events: 0000008f]<6>(write) hda2's sb offset: 522048
md: hdc2 [events: 0000008f]<6>(write) hdc2's sb offset: 522048
md: considering hda3 ...
md:  adding hda3 ...
md:  adding hdc3 ...
md: created md2
md: bind<hdc3,1>
md: bind<hda3,2>
md: running: <hda3><hdc3>
md: hda3's event counter: 0000008e
md: hdc3's event counter: 0000008e
md: RAID level 1 does not need chunksize! Continuing anyway.
md2: max total readahead window set to 124k
md2: 1 data-disks, max readahead per data-disk: 124k
raid1: device hda3 operational as mirror 0
raid1: device hdc3 operational as mirror 1
raid1: raid set md2 active with 2 out of 2 mirrors
md: updating md2 RAID superblock on device
md: hda3 [events: 0000008f]<6>(write) hda3's sb offset: 31390912
md: hdc3 [events: 0000008f]<6>(write) hdc3's sb offset: 31390912
md: ... autorun DONE.
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 136k freed
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 08:42:20 Dec  1 2003
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 11 for device 00:1d.0
PCI: Sharing IRQ 11 with 00:02.0
PCI: Sharing IRQ 11 with 00:1d.3
PCI: Sharing IRQ 11 with 01:04.0
PCI: Setting latency timer of device 00:1d.0 to 64
usb-uhci.c: USB UHCI at I/O 0xc000, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 11 for device 00:1d.1
PCI: Setting latency timer of device 00:1d.1 to 64
usb-uhci.c: USB UHCI at I/O 0xc400, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 9 for device 00:1d.2
PCI: Sharing IRQ 9 with 00:1f.1
PCI: Setting latency timer of device 00:1d.2 to 64
usb-uhci.c: USB UHCI at I/O 0xc800, IRQ 9
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 11 for device 00:1d.3
PCI: Sharing IRQ 11 with 00:02.0
PCI: Sharing IRQ 11 with 00:1d.0
PCI: Sharing IRQ 11 with 01:04.0
PCI: Setting latency timer of device 00:1d.3 to 64
usb-uhci.c: USB UHCI at I/O 0xcc00, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 4
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
PCI: Found IRQ 5 for device 00:1d.7
PCI: Setting latency timer of device 00:1d.7 to 64
ehci_hcd 00:1d.7: Intel Corp. 82801EB USB2
ehci_hcd 00:1d.7: irq 5, pci mem d0058000
usb.c: new USB bus registered, assigned bus number 5
ehci_hcd 00:1d.7: enabled 64bit PCI DMA
PCI: cache line size of 128 is not supported by device 00:1d.7
ehci_hcd 00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2003-Jun-19/2.4
hub.c: USB hub found
hub.c: 8 ports detected
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
EXT3 FS 2.4-0.9.19, 19 August 2002 on md(9,0), internal journal
Adding Swap: 522040k swap-space (priority -1)
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on md(9,2), internal journal
EXT3-fs: mounted filesystem with ordered data mode.