Administrace komentářů

sensors-detect
# sensors-detect revision 5861 (2010-09-21 17:21:05 +0200)
# System: Micro-Star International GX701 (laptop)
# Board: MSI MS-1719x

This program will help you determine which kernel modules you need
to load to use lm_sensors most effectively. It is generally safe
and recommended to accept the default answers to all questions,
unless you know what you're doing.

Some south bridges, CPUs or memory controllers contain embedded sensors.
Do you want to scan for them? This is totally safe. (YES/no): yes
Silicon Integrated Systems SIS5595...                       No
VIA VT82C686 Integrated Sensors...                          No
VIA VT8231 Integrated Sensors...                            No
AMD K8 thermal sensors...                                   No
AMD Family 10h thermal sensors...                           No
AMD Family 11h thermal sensors...                           No
Intel Core family thermal sensor...                         Success!
    (driver `coretemp')
Intel Atom thermal sensor...                                No
Intel AMB FB-DIMM thermal sensor...                         No
VIA C7 thermal sensor...                                    No
VIA Nano thermal sensor...                                  No

Some Super I/O chips contain embedded sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no): yes
Probing for Super-I/O at 0x2e/0x2f
Trying family `National Semiconductor'...                   No
Trying family `SMSC'...                                     No
Trying family `VIA/Winbond/Nuvoton/Fintek'...               No
Trying family `ITE'...                                      No
Probing for Super-I/O at 0x4e/0x4f
Trying family `National Semiconductor'...                   Yes
Found unknown chip with ID 0xbf00

Some hardware monitoring chips are accessible through the ISA I/O ports.
We have to write to arbitrary I/O ports to probe them. This is usually
safe though. Yes, you do have ISA I/O ports even if you do not have any
ISA slots! Do you want to scan the ISA I/O ports? (YES/no): yes
Probing for `National Semiconductor LM78' at 0x290...       No
Probing for `National Semiconductor LM79' at 0x290...       No
Probing for `Winbond W83781D' at 0x290...                   No
Probing for `Winbond W83782D' at 0x290...                   No

Lastly, we can probe the I2C/SMBus adapters for connected hardware
monitoring devices. This is the most risky part, and while it works
reasonably well on most systems, it has been reported to cause trouble
on some systems.
Do you want to probe the I2C/SMBus adapters now? (YES/no): yes
Using driver `i2c-i801' for device 0000:00:1f.3: Intel 82801H ICH8
Module i2c-dev loaded successfully.

Next adapter: SMBus I801 adapter at 0400 (i2c-0)
Do you want to scan it? (YES/no/selectively): yes
yeClient found at address 0x50
sProbing for `Analog Devices ADM1033'...                     No
Probing for `Analog Devices ADM1034'...                     No
Probing for `SPD EEPROM'...                                 Yes
    (confidence 8, not a hardware monitoring chip)
Probing for `EDID EEPROM'...                                No
Client found at address 0x52
Probing for `Analog Devices ADM1033'...                     No
Probing for `Analog Devices ADM1034'...                     No
Probing for `SPD EEPROM'...                                 yesYes
    (confidence 8, not a hardware monitoring chip)

Next adapter: NVIDIA i2c adapter  (i2c-1)
Do you want to scan it? (YES/no/selectively): yes

Next adapter: NVIDIA i2c adapter  (i2c-2)
Do you want to scan it? (YES/no/selectively): yes

Next adapter: NVIDIA i2c adapter  (i2c-3)
Do you want to scan it? (YES/no/selectively): yes
Client found at address 0x4f
Probing for `National Semiconductor LM75'...                No
Probing for `Dallas Semiconductor DS75'...                  No
Probing for `Dallas Semiconductor DS1621/DS1631'...         No
Probing for `Texas Instruments TMP421'...                   No
Probing for `Texas Instruments TMP422'...                   No
Probing for `Maxim MAX6633/MAX6634/MAX6635'...              yNo
Client found at address 0x50
Probing for `Analog Devices ADM1033'...                     No
Probing for `Analog Devices ADM1034'...                     No
Probing for `SPD EEPROM'...                                 No
Probing for `EDID EEPROM'...                                Yes
    (confidence 8, not a hardware monitoring chip)

Next adapter: NVIDIA i2c adapter  (i2c-4)
Do you want to scan it? (YES/no/selectively): yes

Next adapter: NVIDIA i2c adapter  (i2c-5)
Do you want to scan it? (YES/no/selectively): y

Next adapter: NVIDIA i2c adapter  (i2c-6)
Do you want to scan it? (YES/no/selectively): y
Client found at address 0x50
Probing for `Analog Devices ADM1033'...                     No
Probing for `Analog Devices ADM1034'...                     No
Probing for `SPD EEPROM'...                                 No
Probing for `EDID EEPROM'...                                No
Client found at address 0x51
Probing for `Analog Devices ADM1033'...                     No
Probing for `Analog Devices ADM1034'...                     No
Probing for `SPD EEPROM'...                                 No
Client found at address 0x52
Probing for `Analog Devices ADM1033'...                     No
Probing for `Analog Devices ADM1034'...                     No
Probing for `SPD EEPROM'...                                 No
Client found at address 0x53
Probing for `Analog Devices ADM1033'...                     No
Probing for `Analog Devices ADM1034'...                     No
Probing for `SPD EEPROM'...                                 No

Now follows a summary of the probes I have just done.
Just press ENTER to continue: y

Driver `coretemp':
  * Chip `Intel Core family thermal sensor' (confidence: 9)


Do you want to overwrite /etc/conf.d/lm_sensors? Enter s to specify other file name?
  (yes/NO/s): y
Done.
You should now start the lm_sensors service to load the required
kernel modules.

Unloading i2c-dev... OK