Administrace komentářů

Jste na stránce určené pro řešení chyb a problémů týkajících se diskusí a komentářů. Můžete zde našim administrátorům reportovat špatně zařazenou či duplicitní diskusi, vulgární či osočující příspěvek a podobně. Děkujeme vám za vaši pomoc, více očí více vidí, společně můžeme udržet vysokou kvalitu AbcLinuxu.cz.

Příspěvek

1.9.2011 20:59 chinook | skóre: 28
Rozbalit Rozbalit vše Pada server, poškozený raid?

Mám server, který běžel asi 2měsíce a v podstatě nic nedělal. Jakmile jsem na nej začal přesouvat data, tak se restartorval. Vždy po restartu začal přeskládávat raid5. Spadl vždy když byl více zatížený disk. Nenapadá někoho co tam je špatně? V logu jsem našel toto:


 [ 8342.286722] ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 8342.286757] ata2.01: failed command: READ DMA EXT
[ 8342.286790] ata2.01: cmd 25/00:00:00:07:01/00:04:3d:00:00/f0 tag 0 dma 524288 in
[ 8342.286791]          res 51/40:cf:2e:07:01/40:03:3d:00:00/f0 Emask 0x9 (media error)
[ 8342.286867] ata2.01: status: { DRDY ERR }
[ 8342.286888] ata2.01: error: { UNC }
[ 8342.287638] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 8342.287671] ata1.00: BMDMA stat 0x65
[ 8342.287697] ata1.00: failed command: READ DMA EXT
[ 8342.287727] ata1.00: cmd 25/00:00:00:06:01/00:01:3d:00:00/e0 tag 0 dma 131072 in
[ 8342.287728]          res 51/40:3f:b0:06:01/40:00:3d:00:00/e0 Emask 0x9 (media error)
[ 8342.287804] ata1.00: status: { DRDY ERR }
[ 8342.287825] ata1.00: error: { UNC }
[ 8342.301438] ata2.00: configured for UDMA/133
[ 8342.311412] ata1.00: configured for UDMA/133
[ 8342.311586] ata2.01: configured for UDMA/133
[ 8342.311738] ata2: EH complete
[ 8342.322683] ata1.01: configured for UDMA/133
[ 8342.322756] ata1: EH complete
[ 8344.068295] ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 8344.068330] ata2.01: failed command: READ DMA EXT
[ 8344.068362] ata2.01: cmd 25/00:00:00:07:01/00:04:3d:00:00/f0 tag 0 dma 524288 in
[ 8344.068363]          res 51/40:cf:2e:07:01/40:03:3d:00:00/f0 Emask 0x9 (media error)
[ 8344.068439] ata2.01: status: { DRDY ERR }
[ 8344.068460] ata2.01: error: { UNC }
[ 8344.093995] ata2.00: configured for UDMA/133
[ 8344.110243] ata2.01: configured for UDMA/133
[ 8344.110389] ata2: EH complete
[ 8344.128133] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 8344.128166] ata1.00: BMDMA stat 0x65
[ 8344.128192] ata1.00: failed command: READ DMA EXT
[ 8344.128221] ata1.00: cmd 25/00:00:00:06:01/00:01:3d:00:00/e0 tag 0 dma 131072 in
[ 8344.128222]          res 51/40:3f:b0:06:01/40:00:3d:00:00/e0 Emask 0x9 (media error)
[ 8344.128298] ata1.00: status: { DRDY ERR }
[ 8344.128320] ata1.00: error: { UNC }
[ 8344.154050] ata1.00: configured for UDMA/133
[ 8344.162191] ata1.01: configured for UDMA/133
[ 8344.162242] ata1: EH complete
[ 8345.883860] ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 8345.883895] ata2.01: failed command: READ DMA EXT
[ 8345.883929] ata2.01: cmd 25/00:00:00:07:01/00:04:3d:00:00/f0 tag 0 dma 524288 in
[ 8345.883930]          res 51/40:cf:2e:07:01/40:03:3d:00:00/f0 Emask 0x9 (media error)
[ 8345.884006] ata2.01: status: { DRDY ERR }
[ 8345.884028] ata2.01: error: { UNC }
[ 8345.899530] ata2.00: configured for UDMA/133
[ 8345.914672] ata2.01: configured for UDMA/133
[ 8345.914801] ata2: EH complete
[ 8345.976766] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 8345.976799] ata1.00: BMDMA stat 0x65
[ 8345.976826] ata1.00: failed command: READ DMA EXT
[ 8345.976857] ata1.00: cmd 25/00:00:00:06:01/00:01:3d:00:00/e0 tag 0 dma 131072 in
[ 8345.976858]          res 51/40:3f:b0:06:01/40:00:3d:00:00/e0 Emask 0x9 (media error)
[ 8345.976934] ata1.00: status: { DRDY ERR }
[ 8345.976955] ata1.00: error: { UNC }
[ 8345.998597] ata1.00: configured for UDMA/133
[ 8346.008825] ata1.01: configured for UDMA/133
[ 8346.008899] ata1: EH complete
[ 8347.707417] ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 8347.707453] ata2.01: failed command: READ DMA EXT
[ 8347.707485] ata2.01: cmd 25/00:00:00:07:01/00:04:3d:00:00/f0 tag 0 dma 524288 in
[ 8347.707486]          res 51/40:cf:2e:07:01/40:03:3d:00:00/f0 Emask 0x9 (media error)
[ 8347.707562] ata2.01: status: { DRDY ERR }
[ 8347.707583] ata2.01: error: { UNC }
[ 8347.724125] ata2.00: configured for UDMA/133
[ 8347.731229] ata2.01: configured for UDMA/133
[ 8347.731358] ata2: EH complete
[ 8347.825403] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 8347.825436] ata1.00: BMDMA stat 0x65
[ 8347.825457] ata1.00: failed command: READ DMA EXT
[ 8347.825481] ata1.00: cmd 25/00:00:00:06:01/00:01:3d:00:00/e0 tag 0 dma 131072 in
[ 8347.825482]          res 51/40:3f:b0:06:01/40:00:3d:00:00/e0 Emask 0x9 (media error)
[ 8347.825566] ata1.00: status: { DRDY ERR }
[ 8347.825588] ata1.00: error: { UNC }
[ 8347.851206] ata1.00: configured for UDMA/133
[ 8347.859317] ata1.01: configured for UDMA/133
[ 8347.859370] ata1: EH complete
[ 8349.522992] ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 8349.523028] ata2.01: failed command: READ DMA EXT
[ 8349.523063] ata2.01: cmd 25/00:00:00:07:01/00:04:3d:00:00/f0 tag 0 dma 524288 in
[ 8349.523064]          res 51/40:cf:2e:07:01/40:03:3d:00:00/f0 Emask 0x9 (media error)
[ 8349.523140] ata2.01: status: { DRDY ERR }
[ 8349.523162] ata2.01: error: { UNC }
[ 8349.536657] ata2.00: configured for UDMA/133
[ 8349.544929] ata2.01: configured for UDMA/133
[ 8349.545079] ata2: EH complete
[ 8349.673923] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 8349.673956] ata1.00: BMDMA stat 0x65
[ 8349.678896] ata1.00: failed command: READ DMA EXT
[ 8349.678923] ata1.00: cmd 25/00:00:00:06:01/00:01:3d:00:00/e0 tag 0 dma 131072 in
[ 8349.678924]          res 51/40:3f:b0:06:01/40:00:3d:00:00/e0 Emask 0x9 (media error)
[ 8349.679001] ata1.00: status: { DRDY ERR }
[ 8349.679022] ata1.00: error: { UNC }
[ 8349.700833] ata1.00: configured for UDMA/133
[ 8349.709016] ata1.01: configured for UDMA/133
[ 8349.709086] ata1: EH complete
[ 8351.321496] ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 8351.321531] ata2.01: failed command: READ DMA EXT
[ 8351.321564] ata2.01: cmd 25/00:00:00:07:01/00:04:3d:00:00/f0 tag 0 dma 524288 in
[ 8351.321565]          res 51/40:cf:2e:07:01/40:03:3d:00:00/f0 Emask 0x9 (media error)
[ 8351.321641] ata2.01: status: { DRDY ERR }
[ 8351.321662] ata2.01: error: { UNC }
[ 8351.345124] ata2.00: configured for UDMA/133
[ 8351.361398] ata2.01: configured for UDMA/133
[ 8351.361540] sd 1:0:1:0: [sdd] Unhandled sense code
[ 8351.361563] sd 1:0:1:0: [sdd] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 8351.361591] sd 1:0:1:0: [sdd] Sense Key : Medium Error [current] [descriptor]
[ 8351.361626] Descriptor sense data with sense descriptors (in hex):
[ 8351.361652]         72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 8351.361711]         3d 01 07 2e
[ 8351.361741] sd 1:0:1:0: [sdd] Add. Sense: Unrecovered read error - auto reallocate failed
[ 8351.361786] sd 1:0:1:0: [sdd] CDB: Read(10): 28 00 3d 01 07 00 00 04 00 00
[ 8351.361839] end_request: I/O error, dev sdd, sector 1023477550
[ 8351.361906] ata2: EH complete
[ 8351.522382] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 8351.522408] ata1.00: BMDMA stat 0x65
[ 8351.522428] ata1.00: failed command: READ DMA EXT
[ 8351.522453] ata1.00: cmd 25/00:00:00:06:01/00:01:3d:00:00/e0 tag 0 dma 131072 in
[ 8351.522454]          res 51/40:3f:b0:06:01/40:00:3d:00:00/e0 Emask 0x9 (media error)
[ 8351.522530] ata1.00: status: { DRDY ERR }
[ 8351.522551] ata1.00: error: { UNC }
[ 8351.539284] ata1.00: configured for UDMA/133
[ 8351.547507] ata1.01: configured for UDMA/133
[ 8351.547566] sd 0:0:0:0: [sda] Unhandled sense code
[ 8351.547590] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 8351.547619] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor]
[ 8351.547654] Descriptor sense data with sense descriptors (in hex):
[ 8351.547681]         72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 8351.547745]         3d 01 06 b0
[ 8351.547775] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed
[ 8351.547820] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 3d 01 06 00 00 01 00 00
[ 8351.547873] end_request: I/O error, dev sda, sector 1023477424
[ 8351.547904] ata1: EH complete
[ 8351.563692] raid5:md1: read error corrected (8 sectors at 1023280936 on sdd5)
[ 8351.564159] raid5:md1: read error corrected (8 sectors at 1023280944 on sdd5)
[ 8351.564187] raid5:md1: read error corrected (8 sectors at 1023280952 on sdd5)
[ 8351.564214] raid5:md1: read error corrected (8 sectors at 1023280960 on sdd5)
[ 8351.564240] raid5:md1: read error corrected (8 sectors at 1023280968 on sdd5)
[ 8351.564266] raid5:md1: read error corrected (8 sectors at 1023280976 on sdd5)
[ 8351.564293] raid5:md1: read error corrected (8 sectors at 1023280984 on sdd5)
[ 8351.564319] raid5:md1: read error corrected (8 sectors at 1023280992 on sdd5)
[ 8351.564346] raid5:md1: read error corrected (8 sectors at 1023281000 on sdd5)
[ 8351.564372] raid5:md1: read error corrected (8 sectors at 1023281008 on sdd5)
[15996.739851] md: md1: resync done.
[15996.868645] RAID5 conf printout:
[15996.868672]  --- rd:4 wd:4
[15996.868696]  disk 0, o:1, dev:sda5
[15996.868716]  disk 1, o:1, dev:sdb5
[15996.868736]  disk 2, o:1, dev:sdc5
[15996.868756]  disk 3, o:1, dev:sdd5

V tomto formuláři můžete formulovat svou stížnost ohledně příspěvku. Nejprve vyberte typ akce, kterou navrhujete provést s diskusí či příspěvkem. Potom do textového pole napište důvody, proč by měli admini provést vaši žádost, problém nemusí být patrný na první pohled. Odkaz na příspěvek bude přidán automaticky.

Offtopic diskuse použijte pro diskusi mimo záběr našeho portálu (včelařství, windows), která by měla být smazána.
Duplicitní diskuse je určena pro případ, kdy uživatel odeslal svůj dotaz několikrát.
Návrh na cenzuru použijte, pokud komentář obsahuje urážky, vulgarismy nebo porušuje zákony.
Návrh na smazání komentáře je velmi neobvyklá akce používaná obvykle při nepovolené reklamě či spamu, výkřicích psychicky nemocných jedinců (ještírci) nebo pro smazání duplikátních komentářů.
Oprava formátování je žádost pro úpravu formy příspěvku, například pokud někdo píše bez odstavců nebo použije PRE pro celý komentář. Žádosti o změnu obsahu budou zamítnuty.

Vaše jméno
Váš email
Typ požadavku

Slovní popis