Přihlášení | Registrace

napište » Zprávičky

Raspberry Pi Official Magazine 155 a Hello World 27

včera 18:44 | Zajímavý článek

Nová čísla časopisů od nakladatelství Raspberry Pi zdarma ke čtení: Raspberry Pi Official Magazine 155 (pdf) a Hello World 27 (pdf).

Ladislav Hagara | Komentářů: 0

Hyprland 0.50.0

včera 16:11 | Nová verze

Hyprland, tj. kompozitor pro Wayland zaměřený na dláždění okny a zároveň grafické efekty, byl vydán ve verzi 0.50.0. Podrobný přehled novinek na GitHubu.

Ladislav Hagara | Komentářů: 0

Slackware Linux slaví 32 let

včera 15:55 | Komunita

Patrick Volkerding oznámil před dvaatřiceti lety vydání Slackware Linuxu 1.00. Slackware Linux byl tenkrát k dispozici na 3,5 palcových disketách. Základní systém byl na 13 disketách. Kdo chtěl grafiku, potřeboval dalších 11 disket. Slackware Linux 1.00 byl postaven na Linuxu .99pl11 Alpha, libc 4.4.1, g++ 2.4.5 a XFree86 1.3.

Ladislav Hagara | Komentářů: 2

MMR nabízí odměny za odhalení bezpečnostních děr ve svých IT systémech

16.7. 21:22 | IT novinky

Ministerstvo pro místní rozvoj (MMR) jako první orgán státní správy v Česku spustilo takzvaný „bug bounty“ program pro odhalování bezpečnostních rizik a zranitelných míst ve svých informačních systémech. Za nalezení kritické zranitelnosti nabízí veřejnosti odměnu 1000 eur, v případě vysoké závažnosti je to 500 eur. Program se inspiruje přístupy běžnými v komerčním sektoru nebo ve veřejné sféře v zahraničí.

Ladislav Hagara | Komentářů: 13

Česko představilo nový jednotný vizuální styl státu

16.7. 16:22 | IT novinky

Vláda dne 16. července 2025 schválila návrh nového jednotného vizuálního stylu státní správy. Vytvořilo jej na základě veřejné soutěže studio Najbrt. Náklady na přípravu návrhu a metodiky činily tři miliony korun. Modernizovaný dvouocasý lev vychází z malého státního znaku. Vizuální styl doprovází originální písmo Czechia Sans.

Ladislav Hagara | Komentářů: 24

Vyhledávač DuckDuckGo má dnes výpadky

16.7. 15:33 | Upozornění

Vyhledávač DuckDuckGo je podle webu DownDetector od 2:15 SELČ nedostupný. Opět fungovat začal na několik minut zhruba v 15:15. Další služby nesouvisející přímo s vyhledáváním, jako mapy a AI asistent jsou dostupné. Pro některé dotazy během výpadku stále funguje zobrazování například textu z Wikipedie.

bindiff | Komentářů: 8

Více než 600 Laravel aplikací je zranitelných vůči vzdálenému spuštění kódu

16.7. 13:33 | Bezpečnostní upozornění

Více než 600 aplikací postavených na PHP frameworku Laravel je zranitelných vůči vzdálenému spuštění libovolného kódu. Útočníci mohou zneužít veřejně uniklé konfigurační klíče APP_KEY (např. z GitHubu). Z více než 260 000 APP_KEY získaných z GitHubu bylo ověřeno, že přes 600 aplikací je zranitelných. Zhruba 63 % úniků pochází z .env souborů, které často obsahují i další citlivé údaje (např. přístupové údaje k databázím nebo cloudovým službám).

Ladislav Hagara | Komentářů: 5

Helix 25.07

16.7. 00:11 | Nová verze

Open source modální textový editor Helix, inspirovaný editory Vim, Neovim či Kakoune, byl vydán ve verzi 25.07. Přehled novinek se záznamy terminálových sezení v asciinema v oznámení na webu. Detailně v CHANGELOGu na GitHubu.

Ladislav Hagara | Komentářů: 0

Nvidia po souhlasu od Trumpovy vlády obnoví prodej čipů pro AI do Číny

15.7. 20:44 | IT novinky

Americký výrobce čipů Nvidia získal od vlády prezidenta Donalda Trumpa souhlas s prodejem svých pokročilých počítačových čipů používaných k vývoji umělé inteligence (AI) H20 do Číny. Prodej těchto čipů speciálně upravených pro čínský trh by tak mohl být brzy obnoven, uvedla firma na svém blogu. Americká vláda zakázala prodej v dubnu, v době eskalace obchodního sporu mezi oběma zeměmi. Tehdy to zdůvodnila obavami, že by čipy mohla využívat čínská armáda.

Ladislav Hagara | Komentářů: 10

Blender 4.5 LTS

15.7. 17:22 | Nová verze

3D software Blender byl vydán ve verzi 4.5 s prodlouženou podporou. Podrobnosti v poznámkách k vydání. Videopředstavení na YouTube.

Ladislav Hagara | Komentářů: 0

Centrum | Napsat | Starší

navrhněte » Anketa

Jaký je váš oblíbený skriptovací jazyk?

bash (59%)

python (27%)

perl (7%)

powershell (3%)

batch (0%)

vbscript (1%)

jiný, uvedu v diskusi (4%)

Celkem 409 hlasů

Komentářů: 16, poslední 8.6. 21:05

Rozcestník

AbcLinuxu

HDmag.cz

Administrace komentářů

Jste na stránce určené pro řešení chyb a problémů týkajících se diskusí a komentářů. Můžete zde našim administrátorům reportovat špatně zařazenou či duplicitní diskusi, vulgární či osočující příspěvek a podobně. Děkujeme vám za vaši pomoc, více očí více vidí, společně můžeme udržet vysokou kvalitu AbcLinuxu.cz.

Příspěvek

2.7.2012 15:43 2X4B-523P | skóre: 38 | blog: Zelezo_vs_Debian
Rozbalit Rozbalit vše Re: debian sid: problem s nvidia 302.17

Příloha:

xconfig-screen.png (464975 bytů)

ano, xorg.conf je vygenerován starší verzí... ale koukám do logu, dost nových hlášek co jsem nikdy neviděl, ale funguje to... jinak i v logu

[    35.107] (**) Option "IgnoreABI" "True"
[    35.107] (**) Ignoring ABI Version

asi to není správný směr, ale zkusil jsem, co kdyby... ještě přidávám log a screen...

cat /var/log/Xorg.0.log
[    34.903] 
X.Org X Server 1.12.1.902 (1.12.2 RC 2)
Release Date: 2012-05-19
[    34.903] X Protocol Version 11, Revision 0
[    34.903] Build Operating System: Linux 3.2.0-2-amd64 x86_64 Debian
[    34.903] Current Operating System: Linux debian 3.2.0-2-amd64 #1 SMP Mon Jun 11 17:24:18 UTC 2012 x86_64
[    34.903] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-2-amd64 root=UUID=e0861cc7-6df4-4221-9553-1b896972c9fb ro
[    34.903] Build Date: 20 May 2012  08:57:17AM
[    34.903] xorg-server 2:1.12.1.902-1 (Cyril Brulebois kibiatdebian.org) 
[    34.903] Current version of pixman: 0.26.0
[    34.903]    Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
[    34.903] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    34.903] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Jul  1 23:07:56 2012
[    34.968] (==) Using config file: "/etc/X11/xorg.conf"
[    34.968] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    35.079] (==) ServerLayout "Seat_A"
[    35.079] (**) |-->Screen "Screen0" (0)
[    35.079] (**) |   |-->Monitor "Monitor0"
[    35.107] (**) |   |-->Device "Device0"
[    35.107] (**) |-->Input Device "Keyboard0"
[    35.107] (**) |-->Input Device "Mouse0"
[    35.107] (**) Option "IgnoreABI" "True"
[    35.107] (**) Ignoring ABI Version
[    35.107] (==) Automatically adding devices
[    35.107] (==) Automatically enabling devices
[    35.242] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    35.242]    Entry deleted from font path.
[    35.242] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    35.242]    Entry deleted from font path.
[    35.242] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    35.242]    Entry deleted from font path.
[    35.285] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    35.285]    Entry deleted from font path.
[    35.285] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    35.285]    Entry deleted from font path.
[    35.285] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[    35.285]    Entry deleted from font path.
[    35.285] (==) FontPath set to:
        /usr/share/fonts/X11/misc,
        /usr/share/fonts/X11/Type1,
        built-ins
[    35.285] (==) ModulePath set to "/usr/lib/xorg/modules"
[    35.285] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[    35.285] (WW) Disabling Mouse0
[    35.285] (II) Loader magic: 0x7fa75bdc2ae0
[    35.285] (II) Module ABI versions:
[    35.285]    X.Org ANSI C Emulation: 0.4
[    35.285]    X.Org Video Driver: 12.0
[    35.285]    X.Org XInput driver : 16.0
[    35.285]    X.Org Server Extension : 6.0
[    35.285] (--) PCI:*(0:1:0:0) 10de:06cd:1043:8347 rev 163, Mem @ 0xf4000000/33554432, 0xe8000000/134217728, 0xf0000000/67108864, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[    35.285] (II) Open ACPI successful (/var/run/acpid.socket)
[    35.285] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
[    35.285] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
[    35.285] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[    35.285] (II) "record" will be loaded. This was enabled by default and also specified in the config file.
[    35.286] (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
[    35.286] (II) "dri2" will be loaded by default.
[    35.286] (II) LoadModule: "extmod"
[    35.319] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    35.384] (II) Module extmod: vendor="X.Org Foundation"
[    35.384]    compiled for 1.12.1.902, module version = 1.0.0
[    35.385]    Module class: X.Org Server Extension
[    35.385]    ABI class: X.Org Server Extension, version 6.0
[    35.385] (II) Loading extension SELinux
[    35.385] (II) Loading extension MIT-SCREEN-SAVER
[    35.385] (II) Loading extension XFree86-VidModeExtension
[    35.385] (II) Loading extension XFree86-DGA
[    35.385] (II) Loading extension DPMS
[    35.385] (II) Loading extension XVideo
[    35.385] (II) Loading extension XVideo-MotionCompensation
[    35.385] (II) Loading extension X-Resource
[    35.385] (II) LoadModule: "dbe"
[    35.385] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    35.405] (II) Module dbe: vendor="X.Org Foundation"
[    35.405]    compiled for 1.12.1.902, module version = 1.0.0
[    35.405]    Module class: X.Org Server Extension
[    35.405]    ABI class: X.Org Server Extension, version 6.0
[    35.405] (II) Loading extension DOUBLE-BUFFER
[    35.405] (II) LoadModule: "vbe"
[    35.405] (II) Loading /usr/lib/xorg/modules/libvbe.so
[    35.446] (II) Module vbe: vendor="X.Org Foundation"
[    35.446]    compiled for 1.12.1.902, module version = 1.1.0
[    35.446]    ABI class: X.Org Video Driver, version 12.0
[    35.446] (II) LoadModule: "record"
[    35.446] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    35.447] (II) Module record: vendor="X.Org Foundation"
[    35.447]    compiled for 1.12.1.902, module version = 1.13.0
[    35.447]    Module class: X.Org Server Extension
[    35.447]    ABI class: X.Org Server Extension, version 6.0
[    35.447] (II) Loading extension RECORD
[    35.447] (II) LoadModule: "glx"
[    35.447] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    39.554] (II) Module glx: vendor="NVIDIA Corporation"
[    39.554]    compiled for 4.0.2, module version = 1.0.0
[    39.554]    Module class: X.Org Server Extension
[    39.554] (II) NVIDIA GLX Module  302.17  Tue Jun 12 16:22:45 PDT 2012
[    39.554] (II) Loading extension GLX
[    39.554] (II) LoadModule: "xtrap"
[    39.554] (WW) Warning, couldn't open module xtrap
[    39.554] (II) UnloadModule: "xtrap"
[    39.554] (II) Unloading xtrap
[    39.554] (EE) Failed to load module "xtrap" (module does not exist, 0)
[    39.554] (II) LoadModule: "dri"
[    39.554] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    39.657] (II) Module dri: vendor="X.Org Foundation"
[    39.657]    compiled for 1.12.1.902, module version = 1.0.0
[    39.657]    ABI class: X.Org Server Extension, version 6.0
[    39.657] (II) Loading extension XFree86-DRI
[    39.657] (II) LoadModule: "evdev"
[    39.657] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    39.891] (II) Module evdev: vendor="X.Org Foundation"
[    39.891]    compiled for 1.12.1, module version = 2.7.0
[    39.891]    Module class: X.Org XInput Driver
[    39.891]    ABI class: X.Org XInput driver, version 16.0
[    39.891] (II) LoadModule: "evdev"
[    39.891] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    39.891] (II) Module evdev: vendor="X.Org Foundation"
[    39.891]    compiled for 1.12.1, module version = 2.7.0
[    39.891]    Module class: X.Org XInput Driver
[    39.891]    ABI class: X.Org XInput driver, version 16.0
[    39.891] (II) LoadModule: "evdev"
[    39.891] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    39.891] (II) Module evdev: vendor="X.Org Foundation"
[    39.891]    compiled for 1.12.1, module version = 2.7.0
[    39.891]    Module class: X.Org XInput Driver
[    39.891]    ABI class: X.Org XInput driver, version 16.0
[    39.891] (II) LoadModule: "evdev"
[    39.891] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    39.891] (II) Module evdev: vendor="X.Org Foundation"
[    39.891]    compiled for 1.12.1, module version = 2.7.0
[    39.891]    Module class: X.Org XInput Driver
[    39.891]    ABI class: X.Org XInput driver, version 16.0
[    39.891] (II) LoadModule: "dri2"
[    39.891] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    39.944] (II) Module dri2: vendor="X.Org Foundation"
[    39.944]    compiled for 1.12.1.902, module version = 1.2.0
[    39.944]    ABI class: X.Org Server Extension, version 6.0
[    39.944] (II) Loading extension DRI2
[    39.944] (II) LoadModule: "nvidia"
[    39.945] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[    40.220] (II) Module nvidia: vendor="NVIDIA Corporation"
[    40.220]    compiled for 4.0.2, module version = 1.0.0
[    40.220]    Module class: X.Org Video Driver
[    40.282] (II) LoadModule: "evdev"
[    40.283] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    40.283] (II) Module evdev: vendor="X.Org Foundation"
[    40.283]    compiled for 1.12.1, module version = 2.7.0
[    40.283]    Module class: X.Org XInput Driver
[    40.283]    ABI class: X.Org XInput driver, version 16.0
[    40.283] (II) NVIDIA dlloader X Driver  302.17  Tue Jun 12 16:04:53 PDT 2012
[    40.283] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    40.306] (++) using VT number 7

[    40.336] (II) Loading sub module "fb"
[    40.336] (II) LoadModule: "fb"
[    40.336] (II) Loading /usr/lib/xorg/modules/libfb.so
[    40.429] (II) Module fb: vendor="X.Org Foundation"
[    40.429]    compiled for 1.12.1.902, module version = 1.0.0
[    40.429]    ABI class: X.Org ANSI C Emulation, version 0.4
[    40.429] (II) Loading sub module "wfb"
[    40.429] (II) LoadModule: "wfb"
[    40.429] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    40.550] (II) Module wfb: vendor="X.Org Foundation"
[    40.550]    compiled for 1.12.1.902, module version = 1.0.0
[    40.550]    ABI class: X.Org ANSI C Emulation, version 0.4
[    40.550] (II) Loading sub module "ramdac"
[    40.550] (II) LoadModule: "ramdac"
[    40.550] (II) Module "ramdac" already built-in
[    40.589] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[    40.589] (==) NVIDIA(0): RGB weight 888
[    40.589] (==) NVIDIA(0): Default visual is TrueColor
[    40.589] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    40.589] (**) NVIDIA(0): Option "MetaModes" "DFP-0: nvidia-auto-select +0+0"
[    40.589] (**) NVIDIA(0): Enabling 2D acceleration
[    41.550] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-0)) does not support NVIDIA
[    41.550] (II) NVIDIA(GPU-0):     3D Vision stereo.
[    41.551] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 470 (GF100) at PCI:1:0:0 (GPU-0)
[    41.551] (--) NVIDIA(0): Memory: 1310720 kBytes
[    41.551] (--) NVIDIA(0): VideoBIOS: 70.00.21.00.03
[    41.551] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[    41.551] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[    41.557] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 470 at PCI:1:0:0
[    41.557] (--) NVIDIA(0):     CRT-0
[    41.557] (--) NVIDIA(0):     CRT-1
[    41.557] (--) NVIDIA(0):     Samsung SyncMaster (DFP-0) (connected)
[    41.557] (--) NVIDIA(0):     DFP-1
[    41.557] (--) NVIDIA(0):     DFP-2
[    41.557] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[    41.557] (--) NVIDIA(0): CRT-1: 400.0 MHz maximum pixel clock
[    41.557] (--) NVIDIA(0): Samsung SyncMaster (DFP-0): 330.0 MHz maximum pixel clock
[    41.557] (--) NVIDIA(0): Samsung SyncMaster (DFP-0): Internal Dual Link TMDS
[    41.557] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock
[    41.557] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
[    41.557] (--) NVIDIA(0): DFP-2: 330.0 MHz maximum pixel clock
[    41.557] (--) NVIDIA(0): DFP-2: Internal Single Link TMDS
[    41.557] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    41.557] (**) NVIDIA(0):     device Samsung SyncMaster (DFP-0) (Using EDID frequencies
[    41.557] (**) NVIDIA(0):     has been enabled on all display devices.)
[    41.558] (II) NVIDIA(0): Validated modes:
[    41.558] (II) NVIDIA(0):     "DFP-0:nvidia-auto-select+0+0"
[    41.558] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[    41.585] (--) NVIDIA(0): DPI set to (92, 91); computed from "UseEdidDpi" X config
[    41.585] (--) NVIDIA(0):     option
[    41.585] (--) Depth 24 pixmap format is 32 bpp
[    41.585] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[    41.585] (II) NVIDIA:     access.
[    41.589] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select+0+0"
[    41.627] (II) Loading extension NV-GLX
[    41.707] (==) NVIDIA(0): Disabling shared memory pixmaps
[    41.707] (==) NVIDIA(0): Backing store disabled
[    41.707] (==) NVIDIA(0): Silken mouse enabled
[    41.708] (**) NVIDIA(0): DPMS enabled
[    41.708] (II) Loading extension NV-CONTROL
[    41.708] (II) Loading extension XINERAMA
[    41.708] (II) Loading sub module "dri2"
[    41.708] (II) LoadModule: "dri2"
[    41.708] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    41.709] (II) Module dri2: vendor="X.Org Foundation"
[    41.709]    compiled for 1.12.1.902, module version = 1.2.0
[    41.709]    ABI class: X.Org Server Extension, version 6.0
[    41.709] (II) NVIDIA(0): [DRI2] Setup complete
[    41.709] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[    41.709] (--) RandR disabled
[    41.709] (II) Initializing built-in extension Generic Event Extension
[    41.709] (II) Initializing built-in extension SHAPE
[    41.709] (II) Initializing built-in extension MIT-SHM
[    41.709] (II) Initializing built-in extension XInputExtension
[    41.709] (II) Initializing built-in extension XTEST
[    41.709] (II) Initializing built-in extension BIG-REQUESTS
[    41.709] (II) Initializing built-in extension SYNC
[    41.709] (II) Initializing built-in extension XKEYBOARD
[    41.709] (II) Initializing built-in extension XC-MISC
[    41.709] (II) Initializing built-in extension SECURITY
[    41.709] (II) Initializing built-in extension XINERAMA
[    41.709] (II) Initializing built-in extension XFIXES
[    41.709] (II) Initializing built-in extension RENDER
[    41.709] (II) Initializing built-in extension RANDR
[    41.709] (II) Initializing built-in extension COMPOSITE
[    41.709] (II) Initializing built-in extension DAMAGE
[    41.709] (II) SELinux: Disabled on system
[    41.711] (II) Initializing extension GLX
[    42.085] (II) Using input driver 'evdev' for 'Keyboard0'
[    42.085] (**) Option "CoreKeyboard"
[    42.085] (**) Keyboard0: always reports core events
[    42.085] (**) evdev: Keyboard0: Device: "/dev/input/event3"
[    42.086] (--) evdev: Keyboard0: Vendor 0 Product 0x1
[    42.086] (--) evdev: Keyboard0: Found keys
[    42.086] (II) evdev: Keyboard0: Configuring as keyboard
[    42.086] (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD, id 6)
[    42.086] (**) Option "xkb_rules" "evdev"
[    42.086] (**) Option "xkb_model" "evdev"
[    42.086] (**) Option "xkb_layout" "us"
[    42.111] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    42.111] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    42.111] (II) Using input driver 'evdev' for 'Power Button'
[    42.111] (**) Power Button: always reports core events
[    42.111] (**) evdev: Power Button: Device: "/dev/input/event3"
[    42.111] (WW) evdev: Power Button: device file is duplicate. Ignoring.
[    42.140] (EE) PreInit returned 8 for "Power Button"
[    42.140] (II) UnloadModule: "evdev"
[    42.140] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    42.140] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    42.140] (II) Using input driver 'evdev' for 'Power Button'
[    42.140] (**) Power Button: always reports core events
[    42.140] (**) evdev: Power Button: Device: "/dev/input/event2"
[    42.140] (--) evdev: Power Button: Vendor 0 Product 0x1
[    42.140] (--) evdev: Power Button: Found keys
[    42.140] (II) evdev: Power Button: Configuring as keyboard
[    42.140] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[    42.140] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    42.140] (**) Option "xkb_rules" "evdev"
[    42.140] (**) Option "xkb_model" "pc105"
[    42.140] (**) Option "xkb_layout" "cz"
[    42.163] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event6)
[    42.163] (II) No input driver specified, ignoring this device.
[    42.163] (II) This device may have been added with another device file.
[    42.164] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event7)
[    42.164] (II) No input driver specified, ignoring this device.
[    42.164] (II) This device may have been added with another device file.
[    42.164] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event8)
[    42.164] (II) No input driver specified, ignoring this device.
[    42.164] (II) This device may have been added with another device file.
[    42.164] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event9)
[    42.164] (II) No input driver specified, ignoring this device.
[    42.164] (II) This device may have been added with another device file.
[    42.164] (II) config/udev: Adding input device sonixb (/dev/input/event5)
[    42.164] (**) sonixb: Applying InputClass "evdev keyboard catchall"
[    42.164] (II) Using input driver 'evdev' for 'sonixb'
[    42.164] (**) sonixb: always reports core events
[    42.164] (**) evdev: sonixb: Device: "/dev/input/event5"
[    42.165] (--) evdev: sonixb: Vendor 0xc45 Product 0x602c
[    42.165] (--) evdev: sonixb: Found keys
[    42.165] (II) evdev: sonixb: Configuring as keyboard
[    42.165] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.1/input/input5/event5"
[    42.165] (II) XINPUT: Adding extended input device "sonixb" (type: KEYBOARD, id 8)
[    42.165] (**) Option "xkb_rules" "evdev"
[    42.165] (**) Option "xkb_model" "pc105"
[    42.165] (**) Option "xkb_layout" "cz"
[    42.165] (II) config/udev: Adding input device Genius Optical Mouse (/dev/input/event0)
[    42.165] (**) Genius Optical Mouse: Applying InputClass "evdev pointer catchall"
[    42.165] (II) Using input driver 'evdev' for 'Genius Optical Mouse'
[    42.165] (**) Genius Optical Mouse: always reports core events
[    42.165] (**) evdev: Genius Optical Mouse: Device: "/dev/input/event0"
[    42.165] (--) evdev: Genius Optical Mouse: Vendor 0x458 Product 0x3a
[    42.165] (--) evdev: Genius Optical Mouse: Found 3 mouse buttons
[    42.165] (--) evdev: Genius Optical Mouse: Found scroll wheel(s)
[    42.165] (--) evdev: Genius Optical Mouse: Found relative axes
[    42.165] (--) evdev: Genius Optical Mouse: Found x and y relative axes
[    42.165] (II) evdev: Genius Optical Mouse: Configuring as mouse
[    42.165] (II) evdev: Genius Optical Mouse: Adding scrollwheel support
[    42.165] (**) evdev: Genius Optical Mouse: YAxisMapping: buttons 4 and 5
[    42.165] (**) evdev: Genius Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    42.166] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.3/3-1.3:1.0/input/input11/event0"
[    42.166] (II) XINPUT: Adding extended input device "Genius Optical Mouse" (type: MOUSE, id 9)
[    42.166] (II) evdev: Genius Optical Mouse: initialized for relative axes.
[    42.166] (**) Genius Optical Mouse: (accel) keeping acceleration scheme 1
[    42.166] (**) Genius Optical Mouse: (accel) acceleration profile 0
[    42.166] (**) Genius Optical Mouse: (accel) acceleration factor: 2.000
[    42.166] (**) Genius Optical Mouse: (accel) acceleration threshold: 4
[    42.166] (II) config/udev: Adding input device Genius Optical Mouse (/dev/input/mouse0)
[    42.166] (II) No input driver specified, ignoring this device.
[    42.166] (II) This device may have been added with another device file.
[    42.167] (II) config/udev: Adding input device SIGMACH1P USB Keykoard (/dev/input/event1)
[    42.167] (**) SIGMACH1P USB Keykoard: Applying InputClass "evdev keyboard catchall"
[    42.167] (II) Using input driver 'evdev' for 'SIGMACH1P USB Keykoard'
[    42.167] (**) SIGMACH1P USB Keykoard: always reports core events
[    42.167] (**) evdev: SIGMACH1P USB Keykoard: Device: "/dev/input/event1"
[    42.167] (--) evdev: SIGMACH1P USB Keykoard: Vendor 0x1c4f Product 0xe
[    42.167] (--) evdev: SIGMACH1P USB Keykoard: Found keys
[    42.167] (II) evdev: SIGMACH1P USB Keykoard: Configuring as keyboard
[    42.167] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.4/3-1.4:1.0/input/input1/event1"
[    42.167] (II) XINPUT: Adding extended input device "SIGMACH1P USB Keykoard" (type: KEYBOARD, id 10)
[    42.167] (**) Option "xkb_rules" "evdev"
[    42.167] (**) Option "xkb_model" "pc105"
[    42.167] (**) Option "xkb_layout" "cz"
[    42.167] (II) config/udev: Adding input device SIGMACH1P USB Keykoard (/dev/input/event10)
[    42.167] (**) SIGMACH1P USB Keykoard: Applying InputClass "evdev keyboard catchall"
[    42.167] (II) Using input driver 'evdev' for 'SIGMACH1P USB Keykoard'
[    42.167] (**) SIGMACH1P USB Keykoard: always reports core events
[    42.167] (**) evdev: SIGMACH1P USB Keykoard: Device: "/dev/input/event10"
[    42.167] (--) evdev: SIGMACH1P USB Keykoard: Vendor 0x1c4f Product 0xe
[    42.167] (--) evdev: SIGMACH1P USB Keykoard: Found 1 mouse buttons
[    42.167] (--) evdev: SIGMACH1P USB Keykoard: Found scroll wheel(s)
[    42.167] (--) evdev: SIGMACH1P USB Keykoard: Found relative axes
[    42.168] (II) evdev: SIGMACH1P USB Keykoard: Forcing relative x/y axes to exist.
[    42.168] (--) evdev: SIGMACH1P USB Keykoard: Found absolute axes
[    42.168] (II) evdev: SIGMACH1P USB Keykoard: Forcing absolute x/y axes to exist.
[    42.168] (--) evdev: SIGMACH1P USB Keykoard: Found keys
[    42.168] (II) evdev: SIGMACH1P USB Keykoard: Configuring as mouse
[    42.168] (II) evdev: SIGMACH1P USB Keykoard: Configuring as keyboard
[    42.168] (II) evdev: SIGMACH1P USB Keykoard: Adding scrollwheel support
[    42.168] (**) evdev: SIGMACH1P USB Keykoard: YAxisMapping: buttons 4 and 5
[    42.168] (**) evdev: SIGMACH1P USB Keykoard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    42.168] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.4/3-1.4:1.1/input/input10/event10"
[    42.168] (II) XINPUT: Adding extended input device "SIGMACH1P USB Keykoard" (type: KEYBOARD, id 11)
[    42.168] (**) Option "xkb_rules" "evdev"
[    42.168] (**) Option "xkb_model" "pc105"
[    42.168] (**) Option "xkb_layout" "cz"
[    42.168] (II) evdev: SIGMACH1P USB Keykoard: initialized for relative axes.
[    42.168] (WW) evdev: SIGMACH1P USB Keykoard: ignoring absolute axes.
[    42.168] (**) SIGMACH1P USB Keykoard: (accel) keeping acceleration scheme 1
[    42.168] (**) SIGMACH1P USB Keykoard: (accel) acceleration profile 0
[    42.168] (**) SIGMACH1P USB Keykoard: (accel) acceleration factor: 2.000
[    42.168] (**) SIGMACH1P USB Keykoard: (accel) acceleration threshold: 4
[    42.168] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[    42.169] (II) No input driver specified, ignoring this device.
[    42.169] (II) This device may have been added with another device file.
[    80.328] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-0)) does not support NVIDIA
[    80.328] (II) NVIDIA(GPU-0):     3D Vision stereo.
[    80.328] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    80.328] (**) NVIDIA(0):     device Samsung SyncMaster (DFP-0) (Using EDID frequencies
[    80.328] (**) NVIDIA(0):     has been enabled on all display devices.)
[    80.947] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-0)) does not support NVIDIA
[    80.947] (II) NVIDIA(GPU-0):     3D Vision stereo.
[    80.947] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    80.947] (**) NVIDIA(0):     device Samsung SyncMaster (DFP-0) (Using EDID frequencies
[    80.947] (**) NVIDIA(0):     has been enabled on all display devices.)
[    84.964] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-0)) does not support NVIDIA
[    84.964] (II) NVIDIA(GPU-0):     3D Vision stereo.
[    84.964] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    84.964] (**) NVIDIA(0):     device Samsung SyncMaster (DFP-0) (Using EDID frequencies
[    84.964] (**) NVIDIA(0):     has been enabled on all display devices.)
[   623.004] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-0)) does not support NVIDIA
[   623.004] (II) NVIDIA(GPU-0):     3D Vision stereo.
[   623.004] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[   623.004] (**) NVIDIA(0):     device Samsung SyncMaster (DFP-0) (Using EDID frequencies
[   623.004] (**) NVIDIA(0):     has been enabled on all display devices.)
[   623.075] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-0)) does not support NVIDIA
[   623.075] (II) NVIDIA(GPU-0):     3D Vision stereo.
[   623.075] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[   623.075] (**) NVIDIA(0):     device Samsung SyncMaster (DFP-0) (Using EDID frequencies
[   623.075] (**) NVIDIA(0):     has been enabled on all display devices.)
[   623.132] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-0)) does not support NVIDIA
[   623.132] (II) NVIDIA(GPU-0):     3D Vision stereo.
[   623.132] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[   623.132] (**) NVIDIA(0):     device Samsung SyncMaster (DFP-0) (Using EDID frequencies
[   623.132] (**) NVIDIA(0):     has been enabled on all display devices.)
[   647.427] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-0)) does not support NVIDIA
[   647.427] (II) NVIDIA(GPU-0):     3D Vision stereo.
[   647.427] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[   647.427] (**) NVIDIA(0):     device Samsung SyncMaster (DFP-0) (Using EDID frequencies
[   647.427] (**) NVIDIA(0):     has been enabled on all display devices.)
[ 13996.226] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-0)) does not support NVIDIA
[ 13996.226] (II) NVIDIA(GPU-0):     3D Vision stereo.
[ 13996.226] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 13996.226] (**) NVIDIA(0):     device Samsung SyncMaster (DFP-0) (Using EDID frequencies
[ 13996.226] (**) NVIDIA(0):     has been enabled on all display devices.)

V tomto formuláři můžete formulovat svou stížnost ohledně příspěvku. Nejprve vyberte typ akce, kterou navrhujete provést s diskusí či příspěvkem. Potom do textového pole napište důvody, proč by měli admini provést vaši žádost, problém nemusí být patrný na první pohled. Odkaz na příspěvek bude přidán automaticky.

Offtopic diskuse použijte pro diskusi mimo záběr našeho portálu (včelařství, windows), která by měla být smazána.
Duplicitní diskuse je určena pro případ, kdy uživatel odeslal svůj dotaz několikrát.
Návrh na cenzuru použijte, pokud komentář obsahuje urážky, vulgarismy nebo porušuje zákony.
Návrh na smazání komentáře je velmi neobvyklá akce používaná obvykle při nepovolené reklamě či spamu, výkřicích psychicky nemocných jedinců (ještírci) nebo pro smazání duplikátních komentářů.
Oprava formátování je žádost pro úpravu formy příspěvku, například pokud někdo píše bez odstavců nebo použije PRE pro celý komentář. Žádosti o změnu obsahu budou zamítnuty.

Píšeme jinde

ISSN 1214-1267 www.czech-server.cz

Redakce | Inzerce | Podmínky použití | Osobní údaje

Vaše jméno
Váš email
Typ požadavku

Slovní popis