Administrace komentářů

Ahoj, snažím se pod Ubuntu 12.04 zprovoznit satelitní kartu pro příjem otevřených kanálů. Podle výpisu vypadá že se zavedly knihovny v pořádku. Ale když chci skenovat kanály, tak mi to píše "skipped (no driver support)", za minutu to dojede, ale v seznamu kanálů není vůbec nic. Vyznáte se v tom někdo, za jakoukoliv radu budu vděčný.

$lspci:

03:00.0 Network controller: Techsan Electronics Co Ltd B2C2 FlexCopII DVB chip / Technisat SkyStar2 DVB card (rev 02)

$w_scan -f s -s S23E5 -X > kanaly

w_scan version 20121111 (compiled for DVB API 5.4)

using settings for 23.5 east Astra 1E/3A
scan type SATELLITE, channellist 64
output format czap/tzap/szap/xine
output charset 'UTF-8', use -C  to override
Info: using DVB adapter auto detection.
	/dev/dvb/adapter0/frontend0 -> SATELLITE "ST STV0299 DVB-S": good 
Using SATELLITE frontend (adapter /dev/dvb/adapter0/frontend0)
-_-_-_-_ Getting frontend capabilities-_-_-_-_ 
Using DVB API 5.4
frontend 'ST STV0299 DVB-S' supports
INVERSION_AUTO
DVB-S
FREQ (0.95GHz ... 2.15GHz)
SRATE (1.000MSym/s ... 45.000MSym/s)
using LNB "UNIVERSAL"
-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ 
trying 'S  f = 11325 kHz H SR = 22000  5/6 0,35  QPSK'
(time: 00:00) 
trying 'S  f = 11357 kHz H SR = 22000  5/6 0,35  QPSK'
(time: 00:03) 
11659: skipped (no driver support)
11739: skipped (no driver support)
11778: skipped (no driver support)
11798: skipped (no driver support)
11817: skipped (no driver support)
trying 'S  f = 11837 kHz H SR = 27500  5/6 0,35  QPSK'
(time: 00:06) 
11856: skipped (no driver support)
trying 'S  f = 11875 kHz H SR = 27500  5/6 0,35  QPSK'
(time: 00:09) 
trying 'S  f = 11895 kHz V SR = 27500  5/6 0,35  QPSK'
(time: 00:12) 
trying 'S  f = 11914 kHz H SR = 27500  3/4 0,35  QPSK'
(time: 00:14) 
11934: skipped (no driver support)
11954: skipped (no driver support)
trying 'S  f = 11973 kHz V SR = 27500  5/6 0,35  QPSK'
(time: 00:17) 
trying 'S  f = 11992 kHz H SR = 27500  3/4 0,35  QPSK'
(time: 00:20) 
12032: skipped (no driver support)
12051: skipped (no driver support)
trying 'S  f = 12070 kHz H SR = 27500  3/4 0,35  QPSK'

$dmesg |grep DVB

[   25.060324] DVB: registering new adapter (FlexCop Digital TV device)
[   25.649905] b2c2-flexcop: found 'ST STV0299 DVB-S' .
[   25.649913] DVB: registering adapter 0 frontend 0 (ST STV0299 DVB-S)...
[   25.650012] b2c2-flexcop: initialization of 'Sky2PC/SkyStar 2 DVB-S rev 2.6' at the 'PCI' bus controlled by a 'FlexCopIIb' complete