Administrace komentářů

root@ideaCentre:/home/m# modprobe -v it87
insmod /lib/modules/3.10.0-031000rc3-generic/kernel/drivers/hwmon/hwmon-vid.ko 
insmod /lib/modules/3.10.0-031000rc3-generic/kernel/drivers/hwmon/it87.ko 
root@ideaCentre:/home/m# dmesg | grep it87
[ 1391.422205] it87: Found IT8772F chip at 0x290, revision 2
[ 1391.422227] it87: Beeping is supported
root@ideaCentre:/home/m# sensors
acpitz-virtual-0
Adapter: Virtual device
temp1:        +44.0°C  (crit = +101.0°C)
temp2:        +44.0°C  (crit = +101.0°C)

coretemp-isa-0000
Adapter: ISA adapter
Physical id 0:  +51.0°C  (high = +86.0°C, crit = +100.0°C)
Core 0:         +46.0°C  (high = +86.0°C, crit = +100.0°C)
Core 1:         +51.0°C  (high = +86.0°C, crit = +100.0°C)

it8772-isa-0290
Adapter: ISA adapter
in0:          +2.23 V  (min =  +0.17 V, max =  +1.13 V)  ALARM
in1:          +2.23 V  (min =  +1.96 V, max =  +1.96 V)  ALARM
in2:          +3.06 V  (min =  +1.27 V, max =  +1.16 V)  ALARM
in3:          +3.06 V  (min =  +2.16 V, max =  +2.65 V)  ALARM
in4:          +2.23 V  (min =  +2.26 V, max =  +1.16 V)  ALARM
in5:          +1.58 V  (min =  +2.41 V, max =  +0.11 V)  ALARM
in6:          +2.80 V  (min =  +2.06 V, max =  +2.58 V)  ALARM
3VSB:         +3.31 V  (min =  +3.10 V, max =  +2.26 V)  ALARM
Vbat:         +3.22 V  
fan2:        4166 RPM  (min =   14 RPM)
fan3:           0 RPM  (min =   22 RPM)  ALARM
temp1:       -128.0°C  (low  = -78.0°C, high =  +1.0°C)  sensor = disabled
temp2:       -128.0°C  (low  = +74.0°C, high = -32.0°C)  sensor = disabled
temp3:        +50.0°C  (low  = +12.0°C, high = +100.0°C)  sensor = Intel PECI
intrusion0:  ALARM