Administrace komentářů

[root@jh0vm002 DBD-Sybase-1.16]# make clean
rm -f \
  core.[0-9] Sybase.bso \
  pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
  MYMETA.yml perl \
  tmon.out *.o \
  pm_to_blib blibdirs.ts \
  *perl.core core.*perl.*.? \
  Sybase.def core.[0-9][0-9][0-9] \
  mon.out libSybase.def \
  perlmain.c perl.exe \
  so_locations Sybase.exp \
  *.a core \
  blib/arch/auto/DBD/Sybase/extralibs.all core.[0-9][0-9] \
  MYMETA.json Sybase.bs \
  Sybase.x blib/arch/auto/DBD/Sybase/extralibs.ld \
  Sybase.c core.[0-9][0-9][0-9][0-9][0-9] \
  Makefile.aperl perl
rm -rf \
  Sybase.xsi PWD \
  blib
mv Makefile Makefile.old > /dev/null 2>&1
[root@jh0vm002 DBD-Sybase-1.16]# perl Makefile.PL
Unknown Client Library version - assuming FreeTDS.

By default DBD::Sybase 1.05 and later use the 'CHAINED' mode (where available)
when 'AutoCommit' is turned off. Versions 1.04 and older instead managed
the transactions explicitly with a 'BEGIN TRAN' before the first DML
statement. Using the 'CHAINED' mode is preferable as it is the way that
Sybase implements AutoCommit handling for both its ODBC and JDBC drivers.

Use 'CHAINED' mode by default (Y/N) [Y]:

Running in threaded mode - looking for _r libraries...

***NOTE***
There is an incompatibility between perl (5.8.x or later) built in threaded
mode and Sybase's threaded libraries, which means that signals delivered to
the perl process result in a segment violation.

I suggest building DBD::Sybase with the normal libraries in this case to get
reasonable behavior for signal handling.

Use the threaded (lib..._r) libraries [N]:

OK - I'll use the normal libs

Running in 64bit mode - looking for '64' libraries...
BLK api NOT available.
The DBD::Sybase module need access to a Sybase server to run the tests.
To clear an entry please enter 'undef'
Sybase server to use (default: SYBASE):
User ID to log in to Sybase (default: sa):
Password (default: undef):
Sybase database to use on SYBASE (default: undef):

* Writing login information, including password, to file PWD.

Checking if your kit is complete...
Looks good
Warning (mostly harmless): No library found for -lcs
Warning (mostly harmless): No library found for -lsybtcl
Warning (mostly harmless): No library found for -lcomn
Warning (mostly harmless): No library found for -lintl
Warning (mostly harmless): No library found for -lblk
Using DBI 1.627 (for perl 5.016003 on x86_64-linux-thread-multi) installed in /usr/lib64/perl5/vendor_perl/auto/DBI/
Writing Makefile for DBD::Sybase
Writing MYMETA.yml and MYMETA.json
[root@jh0vm002 DBD-Sybase-1.16]# make test
cp dbd-sybase.pod blib/lib/DBD/dbd-sybase.pod
cp Sybase.pm blib/lib/DBD/Sybase.pm
/usr/bin/perl -p -e "s/~DRIVER~/Sybase/g" /usr/lib64/perl5/vendor_perl/auto/DBI/Driver.xst > Sybase.xsi
/usr/bin/perl /usr/share/perl5/vendor_perl/ExtUtils/xsubpp  -typemap /usr/share/perl5/ExtUtils/typemap  Sybase.xs > Sybase.xsc && mv Sybase.xsc Sybase.c
gcc -c  -I/usr/local/freetds/include -DSYB_LP64 -DNO_BLK=1 -I/usr/lib64/perl5/vendor_perl/auto/DBI -D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mtune=generic   -DVERSION=\"1.16\" -DXS_VERSION=\"1.16\" -fPIC "-I/usr/lib64/perl5/CORE"   Sybase.c
In file included from /usr/lib64/perl5/vendor_perl/auto/DBI/DBIXS.h:24:0,
                 from Sybase.h:16,
                 from Sybase.xs:14:
Sybase.c: In function ‘XS_DBD__Sybase__db__isdead’:
/usr/lib64/perl5/CORE/XSUB.h:183:20: warning: unused variable ‘ix’ [-Wunused-variable]
 #define dXSI32 I32 ix = XSANY.any_i32
                    ^
Sybase.c:247:5: note: in expansion of macro ‘dXSI32’
     dXSI32;
     ^
Sybase.c: In function ‘XS_DBD__Sybase__db__date_fmt’:
/usr/lib64/perl5/CORE/XSUB.h:183:20: warning: unused variable ‘ix’ [-Wunused-variable]
 #define dXSI32 I32 ix = XSANY.any_i32
                    ^
Sybase.c:266:5: note: in expansion of macro ‘dXSI32’
     dXSI32;
     ^
Sybase.xs: In function ‘XS_DBD__Sybase__db_ping’:
Sybase.xs:83:5: warning: implicit declaration of function ‘syb_ping’ [-Wimplicit-function-declaration]
     ST(0) = sv_2mortal(newSViv(syb_ping(dbh, imp_dbh)));
     ^
Sybase.xs: In function ‘XS_DBD__Sybase__st_cancel’:
Sybase.xs:95:5: warning: implicit declaration of function ‘syb_st_cancel’ [-Wimplicit-function-declaration]
     ST(0) = syb_st_cancel(sth, imp_sth) ? &PL_sv_yes : &PL_sv_no;
     ^
In file included from /usr/lib64/perl5/vendor_perl/auto/DBI/DBIXS.h:24:0,
                 from Sybase.h:16,
                 from Sybase.xs:14:
/usr/lib64/perl5/CORE/XSUB.h:183:20: warning: unused variable ‘ix’ [-Wunused-variable]
 #define dXSI32 I32 ix = XSANY.any_i32
                    ^
Sybase.c:305:5: note: in expansion of macro ‘dXSI32’
     dXSI32;
     ^
Sybase.c: In function ‘XS_DBD__Sybase__st_ct_get_data’:
/usr/lib64/perl5/CORE/XSUB.h:183:20: warning: unused variable ‘ix’ [-Wunused-variable]
 #define dXSI32 I32 ix = XSANY.any_i32
                    ^
Sybase.c:324:5: note: in expansion of macro ‘dXSI32’
     dXSI32;
     ^
Sybase.c: In function ‘XS_DBD__Sybase__st_ct_data_info’:
/usr/lib64/perl5/CORE/XSUB.h:183:20: warning: unused variable ‘ix’ [-Wunused-variable]
 #define dXSI32 I32 ix = XSANY.any_i32
                    ^
Sybase.c:358:5: note: in expansion of macro ‘dXSI32’
     dXSI32;
     ^
Sybase.c: In function ‘XS_DBD__Sybase__st_ct_send_data’:
/usr/lib64/perl5/CORE/XSUB.h:183:20: warning: unused variable ‘ix’ [-Wunused-variable]
 #define dXSI32 I32 ix = XSANY.any_i32
                    ^
Sybase.c:397:5: note: in expansion of macro ‘dXSI32’
     dXSI32;
     ^
Sybase.c: In function ‘XS_DBD__Sybase__st_ct_prepare_send’:
/usr/lib64/perl5/CORE/XSUB.h:183:20: warning: unused variable ‘ix’ [-Wunused-variable]
 #define dXSI32 I32 ix = XSANY.any_i32
                    ^
Sybase.c:420:5: note: in expansion of macro ‘dXSI32’
     dXSI32;
     ^
Sybase.c: In function ‘XS_DBD__Sybase__st_ct_finish_send’:
/usr/lib64/perl5/CORE/XSUB.h:183:20: warning: unused variable ‘ix’ [-Wunused-variable]
 #define dXSI32 I32 ix = XSANY.any_i32
                    ^
Sybase.c:439:5: note: in expansion of macro ‘dXSI32’
     dXSI32;
     ^
Sybase.c: In function ‘XS_DBD__Sybase__st_ct_data_info’:
Sybase.xs:129:29: warning: ‘sybaction’ may be used uninitialized in this function [-Wmaybe-uninitialized]
     ST(0) = syb_ct_data_info(sth, imp_sth, sybaction, column, attr) ? &PL_sv_yes : &PL_sv_no;
                             ^
Sybase.xs:123:9: note: ‘sybaction’ was declared here
     int sybaction;
         ^
gcc -c  -I/usr/local/freetds/include -DSYB_LP64 -DNO_BLK=1 -I/usr/lib64/perl5/vendor_perl/auto/DBI -D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mtune=generic   -DVERSION=\"1.16\" -DXS_VERSION=\"1.16\" -fPIC "-I/usr/lib64/perl5/CORE"   dbdimp.c
dbdimp.c: In function ‘cslibmsg_cb’:
dbdimp.c:228:4: warning: format ‘%ld’ expects argument of type ‘long int’, but argument 3 has type ‘int’ [-Wformat=]
    CS_LAYER(errmsg->msgnumber), CS_ORIGIN(errmsg->msgnumber));
    ^
dbdimp.c:228:4: warning: format ‘%ld’ expects argument of type ‘long int’, but argument 4 has type ‘int’ [-Wformat=]
dbdimp.c:230:4: warning: format ‘%ld’ expects argument of type ‘long int’, but argument 3 has type ‘int’ [-Wformat=]
    CS_SEVERITY(errmsg->msgnumber), CS_NUMBER(errmsg->msgnumber));
    ^
dbdimp.c:230:4: warning: format ‘%ld’ expects argument of type ‘long int’, but argument 4 has type ‘int’ [-Wformat=]
In file included from /usr/lib64/perl5/CORE/perl.h:5012:0,
                 from /usr/lib64/perl5/vendor_perl/auto/DBI/DBIXS.h:23,
                 from Sybase.h:16,
                 from dbdimp.c:11:
dbdimp.c: In function ‘clientmsg_cb’:
/usr/lib64/perl5/CORE/pp.h:125:16: warning: value computed is not used [-Wunused-value]
 #define POPs  (*sp--)
                ^
dbdimp.c:294:5: note: in expansion of macro ‘POPs’
     POPs;
     ^
dbdimp.c:316:5: warning: format ‘%ld’ expects argument of type ‘long int’, but argument 3 has type ‘int’ [-Wformat=]
     CS_LAYER(errmsg->msgnumber), CS_ORIGIN(errmsg->msgnumber));
     ^
dbdimp.c:316:5: warning: format ‘%ld’ expects argument of type ‘long int’, but argument 4 has type ‘int’ [-Wformat=]
dbdimp.c:319:5: warning: format ‘%ld’ expects argument of type ‘long int’, but argument 3 has type ‘int’ [-Wformat=]
     CS_SEVERITY(errmsg->msgnumber), CS_NUMBER(errmsg->msgnumber));
     ^
dbdimp.c:319:5: warning: format ‘%ld’ expects argument of type ‘long int’, but argument 4 has type ‘int’ [-Wformat=]
dbdimp.c:372:5: warning: format ‘%ld’ expects argument of type ‘long int’, but argument 3 has type ‘int’ [-Wformat=]
     CS_LAYER(errmsg->msgnumber), CS_ORIGIN(errmsg->msgnumber));
     ^
dbdimp.c:372:5: warning: format ‘%ld’ expects argument of type ‘long int’, but argument 4 has type ‘int’ [-Wformat=]
dbdimp.c:374:5: warning: format ‘%ld’ expects argument of type ‘long int’, but argument 3 has type ‘int’ [-Wformat=]
     CS_SEVERITY(errmsg->msgnumber), CS_NUMBER(errmsg->msgnumber));
     ^
dbdimp.c:374:5: warning: format ‘%ld’ expects argument of type ‘long int’, but argument 4 has type ‘int’ [-Wformat=]
dbdimp.c: In function ‘servermsg_cb’:
dbdimp.c:404:6: warning: format ‘%ld’ expects argument of type ‘long int’, but argument 3 has type ‘CS_MSGNUM’ [-Wformat=]
      srvmsg->msgnumber, srvmsg->severity);
      ^
dbdimp.c:404:6: warning: format ‘%ld’ expects argument of type ‘long int’, but argument 4 has type ‘CS_INT’ [-Wformat=]
dbdimp.c:406:6: warning: format ‘%ld’ expects argument of type ‘long int’, but argument 3 has type ‘CS_INT’ [-Wformat=]
      srvmsg->state, srvmsg->line);
      ^
dbdimp.c:406:6: warning: format ‘%ld’ expects argument of type ‘long int’, but argument 4 has type ‘CS_INT’ [-Wformat=]
In file included from /usr/lib64/perl5/CORE/perl.h:5012:0,
                 from /usr/lib64/perl5/vendor_perl/auto/DBI/DBIXS.h:23,
                 from Sybase.h:16,
                 from dbdimp.c:11:
/usr/lib64/perl5/CORE/pp.h:125:16: warning: value computed is not used [-Wunused-value]
 #define POPs  (*sp--)
                ^
dbdimp.c:502:4: note: in expansion of macro ‘POPs’
    POPs;
    ^
dbdimp.c:540:5: warning: format ‘%ld’ expects argument of type ‘long int’, but argument 3 has type ‘CS_MSGNUM’ [-Wformat=]
     srvmsg->msgnumber, srvmsg->severity);
     ^
dbdimp.c:540:5: warning: format ‘%ld’ expects argument of type ‘long int’, but argument 4 has type ‘CS_INT’ [-Wformat=]
dbdimp.c:543:5: warning: format ‘%ld’ expects argument of type ‘long int’, but argument 3 has type ‘CS_INT’ [-Wformat=]
     srvmsg->state, srvmsg->line);
     ^
dbdimp.c:543:5: warning: format ‘%ld’ expects argument of type ‘long int’, but argument 4 has type ‘CS_INT’ [-Wformat=]
dbdimp.c:580:6: warning: format ‘%ld’ expects argument of type ‘long int’, but argument 3 has type ‘CS_MSGNUM’ [-Wformat=]
      srvmsg->msgnumber, srvmsg->severity);
      ^
dbdimp.c:580:6: warning: format ‘%ld’ expects argument of type ‘long int’, but argument 4 has type ‘CS_INT’ [-Wformat=]
dbdimp.c:582:6: warning: format ‘%ld’ expects argument of type ‘long int’, but argument 3 has type ‘CS_INT’ [-Wformat=]
      srvmsg->state, srvmsg->line);
      ^
dbdimp.c:582:6: warning: format ‘%ld’ expects argument of type ‘long int’, but argument 4 has type ‘CS_INT’ [-Wformat=]
dbdimp.c: In function ‘syb_init’:
dbdimp.c:771:9: warning: unused variable ‘boolean’ [-Wunused-variable]
  CS_INT boolean = CS_FALSE;
         ^
dbdimp.c: In function ‘get_server_version’:
dbdimp.c:1661:8: warning: unused variable ‘db’ [-Wunused-variable]
  char *db;
        ^
dbdimp.c: In function ‘syb_db_opentran’:
dbdimp.c:2049:2: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 3 has type ‘struct imp_dbh_t *’ [-Wformat=]
  sprintf(imp_dbh->tranName, "DBI%x", imp_dbh);
  ^
dbdimp.c: In function ‘syb_db_disconnect’:
dbdimp.c:2088:2: warning: suggest parentheses around assignment used as truth value [-Wparentheses]
  if (imp_dbh->disconnectInChild = 0 && imp_dbh->pid != getpid()) {
  ^
dbdimp.c: In function ‘syb_db_STORE_attrib’:
dbdimp.c:2177:7: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]
   int ret;
       ^
dbdimp.c: In function ‘syb_alloc_cmd’:
dbdimp.c:2613:5: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 3 has type ‘struct CS_COMMAND *’ [-Wformat=]
     cmd, connection);
     ^
dbdimp.c:2613:5: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 4 has type ‘struct CS_CONNECTION *’ [-Wformat=]
dbdimp.c: In function ‘dbd_preparse’:
dbdimp.c:2622:4: warning: unused variable ‘STATES’ [-Wunused-variable]
  } STATES;
    ^
dbdimp.c: In function ‘_convert’:
dbdimp.c:3491:23: warning: suggest parentheses around ‘&&’ within ‘||’ [-Wparentheses]
  if (DBIS->debug >= 3 && retcode != CS_SUCCEED || reslen == CS_UNUSED)
                       ^
dbdimp.c: In function ‘cmd_execute’:
dbdimp.c:3816:7: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 3 has type ‘struct CS_COMMAND *’ [-Wformat=]
       imp_sth->cmd, imp_sth->statement, imp_sth);
       ^
dbdimp.c:3816:7: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 5 has type ‘struct imp_sth_t *’ [-Wformat=]
In file included from /usr/lib64/perl5/CORE/perl.h:3436:0,
                 from /usr/lib64/perl5/vendor_perl/auto/DBI/DBIXS.h:23,
                 from Sybase.h:16,
                 from dbdimp.c:11:
dbdimp.c: In function ‘syb_st_fetch’:
/usr/lib64/perl5/CORE/sv.h:1601:5: warning: pointer targets in initialization differ in signedness [-Wpointer-sign]
     ((SvFLAGS(sv) & (SVf_POK)) == SVf_POK \
     ^
dbdimp.c:4127:19: note: in expansion of macro ‘SvPV_nolen’
       U8 *value = SvPV_nolen(sv);
                   ^
dbdimp.c: In function ‘syb_st_destroy’:
dbdimp.c:4440:5: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 3 has type ‘struct imp_sth_t *’ [-Wformat=]
     "    syb_st_destroy: called on %x...\n", imp_sth);
     ^
dbdimp.c:4475:6: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 3 has type ‘struct CS_COMMAND *’ [-Wformat=]
      "    ct_cmd_drop() -> CS_COMMAND %x\n", imp_sth->cmd);
      ^
In file included from Sybase.h:16:0,
                 from dbdimp.c:11:
dbdimp.c: In function ‘syb_ct_send_data’:
/usr/lib64/perl5/vendor_perl/auto/DBI/DBIXS.h:381:45: warning: unused variable ‘imp_dbh’ [-Wunused-variable]
 #define D_imp_dbh_from_sth D_imp_from_child(imp_dbh, imp_dbh_t, imp_sth)
                                             ^
/usr/lib64/perl5/vendor_perl/auto/DBI/DBIXS.h:379:39: note: in definition of macro ‘D_imp_from_child’
                                 type *name = (type*)(DBIc_PARENT_COM(child))
                                       ^
dbdimp.c:4628:2: note: in expansion of macro ‘D_imp_dbh_from_sth’
  D_imp_dbh_from_sth;
  ^
dbdimp.c: In function ‘_dbd_rebind_ph’:
dbdimp.c:5295:5: warning: format ‘%d’ expects argument of type ‘int’, but argument 5 has type ‘IV’ [-Wformat=]
     phs->sv_buf, (long) phs->maxlen, SvOK(phs->sv) ? 1 : 0);
     ^
dbdimp.c:5301:5: warning: format ‘%d’ expects argument of type ‘int’, but argument 6 has type ‘STRLEN’ [-Wformat=]
     value_len);
     ^
In file included from /usr/lib64/perl5/CORE/perl.h:3436:0,
                 from /usr/lib64/perl5/vendor_perl/auto/DBI/DBIXS.h:23,
                 from Sybase.h:16,
                 from dbdimp.c:11:
dbdimp.c: In function ‘syb_bind_ph’:
/usr/lib64/perl5/CORE/sv.h:1568:13: warning: operation on ‘lna’ may be undefined [-Wsequence-point]
      ? ((lp = SvCUR(sv)), SvPVX(sv)) : sv_2pv_flags(sv, &lp, flags))
             ^
/usr/lib64/perl5/CORE/sv.h:1562:22: note: in expansion of macro ‘SvPV_flags’
 #define SvPV(sv, lp) SvPV_flags(sv, lp, SV_GMAGIC)
                      ^
dbdimp.c:5389:23: note: in expansion of macro ‘SvPV’
       lna), attribs ? SvPV(attribs, lna) : "");
                       ^
dbdimp.c: In function ‘fetch_data’:
dbdimp.c:5528:4: warning: format ‘%ld’ expects argument of type ‘long int’, but argument 3 has type ‘CS_INT’ [-Wformat=]
    sprintf(buff, "Error on row %ld.\n", row_count);
    ^
dbdimp.c: At top level:
dbdimp.c:183:1: warning: ‘cslibmsg_cb’ defined but not used [-Wunused-function]
 cslibmsg_cb(CS_CONTEXT *context, CS_CLIENTMSG *errmsg) {
 ^
dbdimp.c:5807:13: warning: ‘blkCleanUp’ defined but not used [-Wunused-function]
 static void blkCleanUp(imp_sth_t *imp_sth, imp_dbh_t *imp_dbh)
             ^
dbdimp.c:5836:12: warning: ‘getTableName’ defined but not used [-Wunused-function]
 static int getTableName(char *statement, char *table, int maxwidth) {
            ^
dbdimp.c:3475:12: warning: ‘_convert’ defined but not used [-Wunused-function]
 static int _convert(void *ptr, char *str, CS_LOCALE *locale,
            ^
dbdimp.c:3502:19: warning: ‘get_cs_msg’ defined but not used [-Wunused-function]
 static CS_RETCODE get_cs_msg(CS_CONTEXT *context, CS_CONNECTION *connection,
                   ^
dbdimp.c:3581:15: warning: ‘alloc_datatype’ defined but not used [-Wunused-function]
 static void * alloc_datatype(CS_INT datatype, int *len) {
               ^
dbdimp.c:3976:12: warning: ‘fix_fbav’ defined but not used [-Wunused-function]
 static int fix_fbav(imp_sth_t *imp_sth, int num_fields, AV *av) {
            ^
dbdimp.c: In function ‘dbd_preparse’:
dbdimp.c:2697:16: warning: ‘pos’ may be used uninitialized in this function [-Wmaybe-uninitialized]
     varname[pos++] = *src;
                ^
Running Mkbootstrap for DBD::Sybase ()
chmod 644 Sybase.bs
rm -f blib/arch/auto/DBD/Sybase/Sybase.so
gcc  -L/usr/local/freetds/lib -shared -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mtune=generic -Wl,-z,relro  Sybase.o dbdimp.o  -o blib/arch/auto/DBD/Sybase/Sybase.so        \
   -L/usr/local/freetds/lib -lct -ldl -lm       \

chmod 755 blib/arch/auto/DBD/Sybase/Sybase.so
cp Sybase.bs blib/arch/auto/DBD/Sybase/Sybase.bs
chmod 644 blib/arch/auto/DBD/Sybase/Sybase.bs
PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/autocommit.t .. 1/9
#   Failed test 'use DBD::Sybase;'
#   at t/autocommit.t line 18.
#     Tried to use 'DBD::Sybase'.
#     Error:  Can't load 'blib/arch/auto/DBD/Sybase/Sybase.so' for module DBD::Sybase: blib/arch/auto/DBD/Sybase/Sybase.so: undefined symbol: cs_dt_crack_v2 at /usr/lib64/perl5/DynaLoader.pm line 190.
#  at (eval 7) line 2.
# Compilation failed in require at (eval 7) line 2.
# BEGIN failed--compilation aborted at (eval 7) line 2.
install_driver(Sybase) failed: Attempt to reload DBD/Sybase.pm aborted.
Compilation failed in require at (eval 8) line 3.

 at t/autocommit.t line 27.
# Looks like you planned 9 tests but ran 2.
# Looks like you failed 1 test of 2 run.
# Looks like your test exited with 255 just after 2.
t/autocommit.t .. Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 8/9 subtests
t/base.t ........ install_driver(Sybase) failed: Can't load '/local/home/pao9jh/DBD-MSSQL/DBD-Sybase-1.16/blib/arch/auto/DBD/Sybase/Sybase.so' for module DBD::Sybase: /local/home/pao9jh/DBD-MSSQL/DBD-Sybase-1.16/blib/arch/auto/DBD/Sybase/Sybase.so: undefined symbol: cs_dt_crack_v2 at /usr/lib64/perl5/DynaLoader.pm line 190.
 at (eval 3) line 3.
Compilation failed in require at (eval 3) line 3.
Perhaps a required shared library or dll isn't installed where expected
 at t/base.t line 18.
t/base.t ........ Dubious, test returned 2 (wstat 512, 0x200)
Failed 2/5 subtests
t/exec.t ........ 1/22
#   Failed test 'use DBD::Sybase;'
#   at t/exec.t line 18.
#     Tried to use 'DBD::Sybase'.
#     Error:  Can't load 'blib/arch/auto/DBD/Sybase/Sybase.so' for module DBD::Sybase: blib/arch/auto/DBD/Sybase/Sybase.so: undefined symbol: cs_dt_crack_v2 at /usr/lib64/perl5/DynaLoader.pm line 190.
#  at (eval 7) line 2.
# Compilation failed in require at (eval 7) line 2.
# BEGIN failed--compilation aborted at (eval 7) line 2.
install_driver(Sybase) failed: Attempt to reload DBD/Sybase.pm aborted.
Compilation failed in require at (eval 8) line 3.

 at t/exec.t line 29.
# Looks like you planned 22 tests but ran 2.
# Looks like you failed 1 test of 2 run.
# Looks like your test exited with 255 just after 2.
t/exec.t ........ Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 21/22 subtests
t/fail.t ........ 1/12
#   Failed test 'use DBD::Sybase;'
#   at t/fail.t line 16.
#     Tried to use 'DBD::Sybase'.
#     Error:  Can't load 'blib/arch/auto/DBD/Sybase/Sybase.so' for module DBD::Sybase: blib/arch/auto/DBD/Sybase/Sybase.so: undefined symbol: cs_dt_crack_v2 at /usr/lib64/perl5/DynaLoader.pm line 190.
#  at (eval 7) line 2.
# Compilation failed in require at (eval 7) line 2.
# BEGIN failed--compilation aborted at (eval 7) line 2.
install_driver(Sybase) failed: Attempt to reload DBD/Sybase.pm aborted.
Compilation failed in require at (eval 8) line 3.

 at t/fail.t line 22.
# Looks like you planned 12 tests but ran 2.
# Looks like you failed 1 test of 2 run.
# Looks like your test exited with 255 just after 2.
t/fail.t ........ Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 11/12 subtests
t/login.t ....... 2/6
#   Failed test 'use DBD::Sybase;'
#   at t/login.t line 18.
#     Tried to use 'DBD::Sybase'.
#     Error:  Can't load 'blib/arch/auto/DBD/Sybase/Sybase.so' for module DBD::Sybase: blib/arch/auto/DBD/Sybase/Sybase.so: undefined symbol: cs_dt_crack_v2 at /usr/lib64/perl5/DynaLoader.pm line 190.
#  at (eval 7) line 2.
# Compilation failed in require at (eval 7) line 2.
# BEGIN failed--compilation aborted at (eval 7) line 2.
install_driver(Sybase) failed: Attempt to reload DBD/Sybase.pm aborted.
Compilation failed in require at (eval 8) line 3.

 at t/login.t line 23.
# Looks like you planned 6 tests but ran 2.
# Looks like you failed 1 test of 2 run.
# Looks like your test exited with 255 just after 2.
t/login.t ....... Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 5/6 subtests
t/main.t ........ 1/36
#   Failed test 'use DBD::Sybase;'
#   at t/main.t line 18.
#     Tried to use 'DBD::Sybase'.
#     Error:  Can't load '/local/home/pao9jh/DBD-MSSQL/DBD-Sybase-1.16/blib/arch/auto/DBD/Sybase/Sybase.so' for module DBD::Sybase: /local/home/pao9jh/DBD-MSSQL/DBD-Sybase-1.16/blib/arch/auto/DBD/Sybase/Sybase.so: undefined symbol: cs_dt_crack_v2 at /usr/lib64/perl5/DynaLoader.pm line 190.
#  at (eval 7) line 2.
# Compilation failed in require at (eval 7) line 2.
# BEGIN failed--compilation aborted at (eval 7) line 2.
install_driver(Sybase) failed: Attempt to reload DBD/Sybase.pm aborted.
Compilation failed in require at (eval 8) line 3.

 at t/main.t line 31.
# Looks like you planned 36 tests but ran 2.
# Looks like you failed 1 test of 2 run.
# Looks like your test exited with 2 just after 2.
t/main.t ........ Dubious, test returned 2 (wstat 512, 0x200)
Failed 35/36 subtests
t/multi_sth.t ... 1/43
#   Failed test 'use DBD::Sybase;'
#   at t/multi_sth.t line 16.
#     Tried to use 'DBD::Sybase'.
#     Error:  Can't load '/local/home/pao9jh/DBD-MSSQL/DBD-Sybase-1.16/blib/arch/auto/DBD/Sybase/Sybase.so' for module DBD::Sybase: /local/home/pao9jh/DBD-MSSQL/DBD-Sybase-1.16/blib/arch/auto/DBD/Sybase/Sybase.so: undefined symbol: cs_dt_crack_v2 at /usr/lib64/perl5/DynaLoader.pm line 190.
#  at (eval 7) line 2.
# Compilation failed in require at (eval 7) line 2.
# BEGIN failed--compilation aborted at (eval 7) line 2.
install_driver(Sybase) failed: Attempt to reload DBD/Sybase.pm aborted.
Compilation failed in require at (eval 8) line 3.

 at t/multi_sth.t line 22.
# Looks like you planned 43 tests but ran 2.
# Looks like you failed 1 test of 2 run.
# Looks like your test exited with 255 just after 2.
t/multi_sth.t ... Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 42/43 subtests
t/nsql.t ........ 1/7
#   Failed test 'use DBD::Sybase;'
#   at t/nsql.t line 15.
#     Tried to use 'DBD::Sybase'.
#     Error:  Can't load '/local/home/pao9jh/DBD-MSSQL/DBD-Sybase-1.16/blib/arch/auto/DBD/Sybase/Sybase.so' for module DBD::Sybase: /local/home/pao9jh/DBD-MSSQL/DBD-Sybase-1.16/blib/arch/auto/DBD/Sybase/Sybase.so: undefined symbol: cs_dt_crack_v2 at /usr/lib64/perl5/DynaLoader.pm line 190.
#  at (eval 7) line 2.
# Compilation failed in require at (eval 7) line 2.
# BEGIN failed--compilation aborted at (eval 7) line 2.
install_driver(Sybase) failed: Attempt to reload DBD/Sybase.pm aborted.
Compilation failed in require at (eval 8) line 3.

 at t/nsql.t line 20.
# Looks like you planned 7 tests but ran 2.
# Looks like you failed 1 test of 2 run.
# Looks like your test exited with 255 just after 2.
t/nsql.t ........ Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 6/7 subtests
t/place.t ....... 1/18
#   Failed test 'use DBD::Sybase;'
#   at t/place.t line 13.
#     Tried to use 'DBD::Sybase'.
#     Error:  Can't load '/local/home/pao9jh/DBD-MSSQL/DBD-Sybase-1.16/blib/arch/auto/DBD/Sybase/Sybase.so' for module DBD::Sybase: /local/home/pao9jh/DBD-MSSQL/DBD-Sybase-1.16/blib/arch/auto/DBD/Sybase/Sybase.so: undefined symbol: cs_dt_crack_v2 at /usr/lib64/perl5/DynaLoader.pm line 190.
#  at (eval 7) line 2.
# Compilation failed in require at (eval 7) line 2.
# BEGIN failed--compilation aborted at (eval 7) line 2.
install_driver(Sybase) failed: Attempt to reload DBD/Sybase.pm aborted.
Compilation failed in require at (eval 8) line 3.

 at t/place.t line 18.
# Looks like you planned 18 tests but ran 2.
# Looks like you failed 1 test of 2 run.
# Looks like your test exited with 255 just after 2.
t/place.t ....... Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 17/18 subtests
t/thread.t ...... Can't load '/local/home/pao9jh/DBD-MSSQL/DBD-Sybase-1.16/blib/arch/auto/DBD/Sybase/Sybase.so' for module DBD::Sybase: /local/home/pao9jh/DBD-MSSQL/DBD-Sybase-1.16/blib/arch/auto/DBD/Sybase/Sybase.so: undefined symbol: cs_dt_crack_v2 at /usr/lib64/perl5/DynaLoader.pm line 190.
 at t/thread.t line 18.
Compilation failed in require at t/thread.t line 18.
BEGIN failed--compilation aborted at t/thread.t line 18.
t/thread.t ...... Dubious, test returned 2 (wstat 512, 0x200)
No subtests run
t/utf8.t ........ Can't load '/local/home/pao9jh/DBD-MSSQL/DBD-Sybase-1.16/blib/arch/auto/DBD/Sybase/Sybase.so' for module DBD::Sybase: /local/home/pao9jh/DBD-MSSQL/DBD-Sybase-1.16/blib/arch/auto/DBD/Sybase/Sybase.so: undefined symbol: cs_dt_crack_v2 at /usr/lib64/perl5/DynaLoader.pm line 190.
 at t/utf8.t line 19.
Compilation failed in require at t/utf8.t line 19.
BEGIN failed--compilation aborted at t/utf8.t line 19.
t/utf8.t ........ Dubious, test returned 2 (wstat 512, 0x200)
No subtests run
t/xblk.t ........ 1/62
#   Failed test 'use DBD::Sybase;'
#   at t/xblk.t line 15.
#     Tried to use 'DBD::Sybase'.
#     Error:  Can't load '/local/home/pao9jh/DBD-MSSQL/DBD-Sybase-1.16/blib/arch/auto/DBD/Sybase/Sybase.so' for module DBD::Sybase: /local/home/pao9jh/DBD-MSSQL/DBD-Sybase-1.16/blib/arch/auto/DBD/Sybase/Sybase.so: undefined symbol: cs_dt_crack_v2 at /usr/lib64/perl5/DynaLoader.pm line 190.
#  at (eval 7) line 2.
# Compilation failed in require at (eval 7) line 2.
# BEGIN failed--compilation aborted at (eval 7) line 2.
Undefined subroutine &DBD::Sybase::set_cslib_cb called at t/xblk.t line 36.
# Looks like you planned 62 tests but ran 2.
# Looks like you failed 1 test of 2 run.
# Looks like your test exited with 255 just after 2.
t/xblk.t ........ Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 61/62 subtests
t/xblob.t ....... 1/11
#   Failed test 'use DBD::Sybase;'
#   at t/xblob.t line 16.
#     Tried to use 'DBD::Sybase'.
#     Error:  Can't load '/local/home/pao9jh/DBD-MSSQL/DBD-Sybase-1.16/blib/arch/auto/DBD/Sybase/Sybase.so' for module DBD::Sybase: /local/home/pao9jh/DBD-MSSQL/DBD-Sybase-1.16/blib/arch/auto/DBD/Sybase/Sybase.so: undefined symbol: cs_dt_crack_v2 at /usr/lib64/perl5/DynaLoader.pm line 190.
#  at (eval 7) line 2.
# Compilation failed in require at (eval 7) line 2.
# BEGIN failed--compilation aborted at (eval 7) line 2.
install_driver(Sybase) failed: Attempt to reload DBD/Sybase.pm aborted.
Compilation failed in require at (eval 8) line 3.

 at t/xblob.t line 21.
# Looks like you planned 11 tests but ran 2.
# Looks like you failed 1 test of 2 run.
# Looks like your test exited with 255 just after 2.
t/xblob.t ....... Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 10/11 subtests

Test Summary Report
-------------------
t/autocommit.t (Wstat: 65280 Tests: 2 Failed: 1)
  Failed test:  2
  Non-zero exit status: 255
  Parse errors: Bad plan.  You planned 9 tests but ran 2.
t/base.t      (Wstat: 512 Tests: 3 Failed: 0)
  Non-zero exit status: 2
  Parse errors: Bad plan.  You planned 5 tests but ran 3.
t/exec.t      (Wstat: 65280 Tests: 2 Failed: 1)
  Failed test:  2
  Non-zero exit status: 255
  Parse errors: Bad plan.  You planned 22 tests but ran 2.
t/fail.t      (Wstat: 65280 Tests: 2 Failed: 1)
  Failed test:  2
  Non-zero exit status: 255
  Parse errors: Bad plan.  You planned 12 tests but ran 2.
t/login.t     (Wstat: 65280 Tests: 2 Failed: 1)
  Failed test:  2
  Non-zero exit status: 255
  Parse errors: Bad plan.  You planned 6 tests but ran 2.
t/main.t      (Wstat: 512 Tests: 2 Failed: 1)
  Failed test:  2
  Non-zero exit status: 2
  Parse errors: Bad plan.  You planned 36 tests but ran 2.
t/multi_sth.t (Wstat: 65280 Tests: 2 Failed: 1)
  Failed test:  2
  Non-zero exit status: 255
  Parse errors: Bad plan.  You planned 43 tests but ran 2.
t/nsql.t      (Wstat: 65280 Tests: 2 Failed: 1)
  Failed test:  2
  Non-zero exit status: 255
  Parse errors: Bad plan.  You planned 7 tests but ran 2.
t/place.t     (Wstat: 65280 Tests: 2 Failed: 1)
  Failed test:  2
  Non-zero exit status: 255
  Parse errors: Bad plan.  You planned 18 tests but ran 2.
t/thread.t    (Wstat: 512 Tests: 0 Failed: 0)
  Non-zero exit status: 2
  Parse errors: No plan found in TAP output
t/utf8.t      (Wstat: 512 Tests: 0 Failed: 0)
  Non-zero exit status: 2
  Parse errors: No plan found in TAP output
t/xblk.t      (Wstat: 65280 Tests: 2 Failed: 1)
  Failed test:  2
  Non-zero exit status: 255
  Parse errors: Bad plan.  You planned 62 tests but ran 2.
t/xblob.t     (Wstat: 65280 Tests: 2 Failed: 1)
  Failed test:  2
  Non-zero exit status: 255
  Parse errors: Bad plan.  You planned 11 tests but ran 2.
Files=13, Tests=23,  1 wallclock secs ( 0.04 usr  0.02 sys +  0.40 cusr  0.08 csys =  0.54 CPU)
Result: FAIL
Failed 13/13 test programs. 10/23 subtests failed.
make: *** [test_dynamic] Error 255
[root@jh0vm002 DBD-Sybase-1.16]#