Administrace komentářů

No myslím, že vůči clonezille zbytečně panikaříš. Clonezilla volí použití nástrojů, partclone -> partimage -> dd, nebo tuším ntfsclone -> partclone -> dd, můžeš ji také říci, že necheš žádné jiné nástroje než dd. Ale hlavně v tom adresáři, kam jsi to dával, bys měl mít informační textové soubory, které clonezila dělá, když pracuje. Ten dost důležitý když to máš takto rozbité je clonezila-img. V něm máš přesně příkazy a výstupy, které clonezila volala a co bylo výsledkem. Já třeba v jedné záloze, kdy jsem zálohoval čistou nikdy nespuštěnou instalaci Win10 nového notebooku před kompletním smazáním a reinstalací do linuxu, mám.

This image was saved by Clonezilla at 2018-12-16 16:21:01 UTC.
Saved by clonezilla-live-2.5.2-17-amd64.
The log during saving:
----------------------------------------------------------
Starting /usr/sbin/ocs-sr at 2018-12-16 15:33:01 UTC...
*****************************************************.
Clonezilla image dir: /home/partimag
Shutting down the Logical Volume Manager
Finished Shutting down the Logical Volume Manager
The selected devices: sda
PS. Next time you can run this command directly:
/usr/sbin/ocs-sr -q2 -j2 -gs -noabo -z1p -i 10000 -sfsck -senc -p choose savedisk 2018-12-16-15-img sda
*****************************************************.
The selected devices: sda
Searching for data/swap/extended partition(s)...
The data partition to be saved: sda1 sda2 sda3 sda4
The selected devices: sda1 sda2 sda3 sda4
Shutting down the Logical Volume Manager
Finished Shutting down the Logical Volume Manager
Saving block devices info in /home/partimag/2018-12-16-15-img/blkdev.list...
Saving block devices attributes in /home/partimag/2018-12-16-15-img/blkid.list...
Checking the integrity of partition table in the disk /dev/sda... 
Reading the partition table for /dev/sda...RETVAL=0
*****************************************************.
Saving the primary GPT of sda as /home/partimag/2018-12-16-15-img/sda-gpt-1st by dd...
34+0 records in
34+0 records out
17408 bytes (17 kB, 17 KiB) copied, 0.00436825 s, 4.0 MB/s
*****************************************************.
Saving the secondary GPT of sda as /home/partimag/2018-12-16-15-img/sda-gpt-2nd by dd...
32+0 records in
32+0 records out
16384 bytes (16 kB, 16 KiB) copied, 0.00627202 s, 2.6 MB/s
*****************************************************.
Saving the GPT of sda as /home/partimag/2018-12-16-15-img/sda-gpt.gdisk by gdisk...
The operation has completed successfully.
*****************************************************.
Saving the MBR data for sda...
1+0 records in
1+0 records out
512 bytes copied, 0.00776893 s, 65.9 kB/s
Starting saving /dev/sda1 as /home/partimag/2018-12-16-15-img/sda1.XXX...
/dev/sda1 filesystem: vfat.
*****************************************************.
*****************************************************.
Use partclone with pigz to save the image.
Image file will be split with size limit 10000 MB.
*****************************************************.
If this action fails or hangs, check:
* Is the disk full ?
*****************************************************.
Run partclone: partclone.vfat -z 10485760 -N -L /var/log/partclone.log -c -s /dev/sda1 --output - | pigz -c --fast -b 1024 -p 16 --rsyncable | split -a 2 -b 10000MB - /home/partimag/2018-12-16-15-img/sda1.vfat-ptcl-img.gz. 2> /tmp/split_error.Rd28sa
Partclone v0.2.91 http://partclone.org
Starting to clone device (/dev/sda1) to image (-)
Reading Super Block
we need memory: 171076 bytes
image head 4160, bitmap 166400, crc 516 bytes
Calculating bitmap... Please wait... done!
File system:  FAT32
Device size:  681.6 MB = 1331200 Blocks
Space in use:  38.4 MB = 75032 Blocks
Free Space:   643.2 MB = 1256168 Blocks
Block size:   512 Byte
Image Version:   0001
Total block 1331200
Syncing... OK!
Partclone successfully cloned the device (/dev/sda1) to the image (-)
>>> Time elapsed: 7.24 secs (~ .120 mins)
*****************************************************.
Finished saving /dev/sda1 as /home/partimag/2018-12-16-15-img/sda1.vfat-ptcl-img.gz
*****************************************************.
Starting saving /dev/sda2 as /home/partimag/2018-12-16-15-img/sda2.XXX...
/dev/sda2 filesystem: MS_Reserved_Partition.
*****************************************************.
This file system is not supported by smart programs, e.g. partclone, partimage or ntfsclone, or you force to use dd to save the file system: MS_Reserved_Partition
dd will save and restore all the blocks in the harddrive, no matter if the block is used or not.
Use this method to save the image instead of partclone, partimage or ntfsclone: partclone.dd + pigz
Image file will be split with size limit 10000 MB.
If this action fails or hangs after several minutes, check:
* Is the disk full ?
*****************************************************.
Run partclone: partclone.dd -z 10485760 -N -L /var/log/partclone.log -s /dev/sda2 --output - | pigz -c --fast -b 1024 -p 16 --rsyncable | split -a 2 -b 10000MB - /home/partimag/2018-12-16-15-img/sda2.dd-img. 2> /tmp/split_error.FvRH4b
Partclone v0.2.91 http://partclone.org
Starting to clone/restore (/dev/sda2) to (-) with dd mode
get device size 134217728 by ioctl BLKGETSIZE64,
we need memory: 37444 bytes
image head 4160, bitmap 32768, crc 516 bytes
Calculating bitmap... Please wait... done!
File system:  raw
Device size:  134.2 MB = 262144 Blocks
Space in use: 134.2 MB = 262144 Blocks
Free Space:     0 Byte = 0 Blocks
Block size:   512 Byte
Image Version:   0001
Total block 262144
Syncing... OK!
>>> Time elapsed: 6.14 secs (~ .102 mins)
*****************************************************.
Finished saving /dev/sda2 as /home/partimag/2018-12-16-15-img/sda2.dd-img
*****************************************************.
Starting saving /dev/sda3 as /home/partimag/2018-12-16-15-img/sda3.XXX...
/dev/sda3 filesystem: ntfs.
*****************************************************.
*****************************************************.
Use partclone with pigz to save the image.
Image file will be split with size limit 10000 MB.
*****************************************************.
If this action fails or hangs, check:
* Is the disk full ?
*****************************************************.
Run partclone: partclone.ntfs -z 10485760 -N -L /var/log/partclone.log -c -s /dev/sda3 --output - | pigz -c --fast -b 1024 -p 16 --rsyncable | split -a 2 -b 10000MB - /home/partimag/2018-12-16-15-img/sda3.ntfs-ptcl-img.gz. 2> /tmp/split_error.ybpHnP
Partclone v0.2.91 http://partclone.org
Starting to clone device (/dev/sda3) to image (-)
Reading Super Block
we need memory: 7765956 bytes
image head 4160, bitmap 7757696, crc 4100 bytes
Calculating bitmap... Please wait... done!
File system:  NTFS
Device size:  254.2 GB = 62061567 Blocks
Space in use:  22.6 GB = 5517673 Blocks
Free Space:   231.6 GB = 56543894 Blocks
Block size:   4096 Byte
Image Version:   0001
Total block 62061567
Syncing... OK!
Partclone successfully cloned the device (/dev/sda3) to the image (-)
>>> Time elapsed: 1048.18 secs (~ 17.469 mins)
*****************************************************.
Finished saving /dev/sda3 as /home/partimag/2018-12-16-15-img/sda3.ntfs-ptcl-img.gz
*****************************************************.
Starting saving /dev/sda4 as /home/partimag/2018-12-16-15-img/sda4.XXX...
/dev/sda4 filesystem: ntfs.
*****************************************************.
*****************************************************.
Use partclone with pigz to save the image.
Image file will be split with size limit 10000 MB.
*****************************************************.
If this action fails or hangs, check:
* Is the disk full ?
*****************************************************.
Run partclone: partclone.ntfs -z 10485760 -N -L /var/log/partclone.log -c -s /dev/sda4 --output - | pigz -c --fast -b 1024 -p 16 --rsyncable | split -a 2 -b 10000MB - /home/partimag/2018-12-16-15-img/sda4.ntfs-ptcl-img.gz. 2> /tmp/split_error.a0mdeQ
Partclone v0.2.91 http://partclone.org
Starting to clone device (/dev/sda4) to image (-)
Reading Super Block
we need memory: 39940 bytes
image head 4160, bitmap 31680, crc 4100 bytes
Calculating bitmap... Please wait... done!
File system:  NTFS
Device size:    1.0 GB = 253439 Blocks
Space in use: 445.0 MB = 108636 Blocks
Free Space:   593.1 MB = 144803 Blocks
Block size:   4096 Byte
Image Version:   0001
Total block 253439
Syncing... OK!
Partclone successfully cloned the device (/dev/sda4) to the image (-)
>>> Time elapsed: 50.66 secs (~ .844 mins)
*****************************************************.
Finished saving /dev/sda4 as /home/partimag/2018-12-16-15-img/sda4.ntfs-ptcl-img.gz
*****************************************************.
End of saveparts job for image /home/partimag/2018-12-16-15-img.
*****************************************************.
*****************************************************.
End of savedisk job for image 2018-12-16-15-img.
GPT 1st partition table file found!
GPT 2nd partition table file found!
GPT partition table file for this disk saved by gdisk was found: sda
MBR file for this disk was found: sda
?[1;33mThe image of this partition is restorable: sda1
?[0;39mImage was saved by dd. No need to check the file system integrity: sda2
?[1;33mThe image of this partition is restorable: sda3
?[0;39m?[1;33mThe image of this partition is restorable: sda4
?[0;39m?[1;33mAll the images of partition or LV devices in this image were checked and they are restorable: 2018-12-16-15-img
?[0;39mChecking if udevd rules have to be restored...
This program is not started by Clonezilla server, so skip notifying it the job is done.
Finished!
This program is not started by Clonezilla server, so skip notifying it the job is done.
Finished!
### End of log ###
### Image created time: 2018-1216-1621

tam je vidět že se pro GPT a MBT pouští dd a např pro sda3 se pouští partclone.ntfs výstup se gzipuje přes pigz a výstup se pustí do spliteru, který to finálně rozsekává a díky tomu, že tam mám nastaveno velkou velikost, aby se nic nedělilo, tak mě vznikl jen jeden soubor

sda3.ntfs-ptcl-img.gz.aa

takže, když bych to musel dávat dohromady ručně. tak nejdříve

cat sda3.ntfs-ptcl-img.gz.* > sda3.ntfs-ptcl-img.gz 

(čistě formálně by to udělalo i když tě částí bude více) Potom

gunzip sda3.ntfs-ptcl-img.gz

a finálně bych použil

partclone.restore

ale teď ti přesné parametry nedám, nemám v systému partclone. Všechno to můžeš dát rukama dohromady. Nepostrácel jsi nějaké soubory při přenosu? já mám v adresáři k záloze

ll 2018-12-16-15-img 
celkem 9073528
-rw-r--r-- 1 root root        817 16. pro 22.37 blkdev.list
-rw-r--r-- 1 root root        743 16. pro 22.37 blkid.list
-rw-r--r-- 1 root root       9187 16. pro 23.23 clonezilla-img
-rw-r--r-- 1 root root        206 16. pro 22.54 dev-fs.list
-rw-r--r-- 1 root root          4 16. pro 22.55 disk
-rw-r--r-- 1 root root      32071 16. pro 22.55 Info-dmi.txt
-rw-r--r-- 1 root root        187 16. pro 23.23 Info-img-id.txt
-rw-r--r-- 1 root root      18163 16. pro 22.55 Info-lshw.txt
-rw-r--r-- 1 root root       2065 16. pro 22.55 Info-lspci.txt
-rw-r--r-- 1 root root        223 16. pro 22.55 Info-packages.txt
-rw-r--r-- 1 root root        104 16. pro 23.23 Info-saved-by-cmd.txt
-rw-r--r-- 1 root root         20 16. pro 22.55 parts
-rw-r--r-- 1 root root      17920 16. pro 22.37 sda-gpt.gdisk
-rw-r--r-- 1 root root        688 16. pro 22.37 sda-gpt.sgdisk
-rw-r--r-- 1 root root      17408 16. pro 22.37 sda-gpt-1st
-rw-r--r-- 1 root root      16384 16. pro 22.37 sda-gpt-2nd
-rw-r--r-- 1 root root         37 16. pro 22.37 sda-chs.sf
-rw-r--r-- 1 root root        512 16. pro 22.37 sda-mbr
-rw-r--r-- 1 root root        620 16. pro 22.37 sda-pt.parted
-rw-r--r-- 1 root root        550 16. pro 22.37 sda-pt.parted.compact
-rw-r--r-- 1 root root        832 16. pro 22.37 sda-pt.sf
-rw-r--r-- 1 root root   21570009 16. pro 22.37 sda1.vfat-ptcl-img.gz.aa
-rw-r--r-- 1 root root     702436 16. pro 22.37 sda2.dd-img.aa
-rw-r--r-- 1 root root 8838391686 16. pro 22.54 sda3.ntfs-ptcl-img.gz.aa
-rw-r--r-- 1 root root  430422927 16. pro 22.55 sda4.ntfs-ptcl-img.gz.aa
-rw-r--r-- 1 root root       1238 16. pro 23.09 SHA1SUMS

Třeba ti to nejede jen, že nesedí hash.

A mám ještě jednu poznámku. Já se k zálohám chovám (a to i k těm z clonezilly) jako k broušeným skleničkám od babičky. Dotýkám se jich velmi opatrně. a rozhodně je nepřehazuji bez rozmyslu.