Administrace komentářů

lspci:
00:08.0 Multimedia video controller: Brooktree Corporation Bt848 Video Capture (rev 12)
/etc/modules.conf:
options bttv pll=1 bttv_gpio=1 tuner=35
dmesg:
Linux video capture interface: v1.00
i2c-algo-bit.o: i2c bit algorithm module
bttv: driver version 0.7.108 loaded
bttv: using 4 buffers with 2080k (8320k total) for capture
bttv: Bt8xx card found (0).
bttv0: Bt848 (rev 18) at 00:08.0, irq: 5, latency: 64, mmio: 0xffaff000
bttv0: using:  *** UNKNOWN/GENERIC ***  [card=0,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init #1]
bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init #1]
bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init #2]
i2c-dev.o: Registered 'bt848 #0' as minor 0
i2c-core.o: adapter bt848 #0 registered as adapter 0.
bttv: readee error
bttv0: using tuner=35
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
i2c-core.o: driver i2c TV tuner driver registered.
tuner: chip found @ 0xc0
tuner: type set to 35 (Temic PAL_DK/SECAM_L (4012 FY5))
i2c-core.o: client [Temic PAL_DK/SECAM_L (4012 FY5)] registered to adapter [bt848 #0](pos. 0).
bttv0: gpio: en=00000000, out=00000000 in=00ffffff [audio: extern]
bttv0: gpio: en=00000000, out=00000000 in=00ffffff [muxsel]
bttv0: PLL: 28636363 => 35468950 .. ok
bttv0: gpio: en=00000000, out=00000000 in=00ffffff [audio: off]
bttv0: registered device video0
bttv0: registered device vbi0
kernel:
2.4.26-pre6
software xawtv-3.91