Administrace komentářů

Slack 10, kernel 2.6.7

TV normálně jede, moduly lirc_gpio a lirc_dev se natáhnou.Bohužel neexistuje /dev/lirc a tak nefunguje DO, trochu mě mate ve výpisu dmesg subdevice remote0, ale ten taky neexistuje. Nevíte někdo v čem by mohl být zakopaný pes?

Část dmesg:

lirc_dev: IR Remote Control driver registered, at major 61
Linux video capture interface: v1.00
bttv: driver version 0.9.14 loaded
bttv: using 4 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
bttv0: Bt878 (rev 17) at 0000:01:07.0, irq: 5, latency: 32, mmio: 0xd0000000
bttv0: detected: Leadtek WinFast TV 2000 [card=34], PCI subsystem ID is 107d:6606
bttv0: using: Leadtek WinFast 2000/ WinFast 2000 XP [card=34,insmod option]
bttv0: gpio: en=00000000, out=00000000 in=00bff3de [pre-init]
bttv0: gpio: en=00000000, out=00000000 in=00bff3de [init]
bttv0: using tuner=5
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
tuner: chip found at addr 0xc2 i2c-bus bt878 #0 [sw]
tuner: type set to 5 (Philips PAL_BG (FI1216 and compatibles)) by bt878 #0 [sw]
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: registered device radio0
bttv0: gpio: en=00b33000, out=00800000 in=000cc3de [audio: off]
bttv0: gpio: en=00b33000, out=00800000 in=000cc3de [audio: off]
bttv0: PLL: 28636363 => 35468950 .. ok
bttv0: add subdevice "remote0"
lirc_gpio (-1): card type 0x22, id 0x6606107d
lirc_dev: lirc_register_plugin:sample_rate: 0
lirc_gpio (0): driver registered
bttv0: gpio: en=00b33000, out=00800000 in=000cc3de [audio: off]

Část /var/log/lircd

Jul 9 16:45:09 myslack lircd 0.7.0pre6: lircd(leadtek_0010) ready
Jul 9 16:45:19 myslack lircd 0.7.0pre6: accepted new client on /dev/lircd
Jul 9 16:45:19 myslack lircd 0.7.0pre6: could not get file information for /dev/lirc
Jul 9 16:45:19 myslack lircd 0.7.0pre6: default_init(): No such file or directory
Jul 9 16:45:19 myslack lircd 0.7.0pre6: caught signal