Dotaz: problem s hp 3400c

[mikke]

stahnul jsem si sane-backends-1.0.16 a opatchoval patchem Niash testtools a pak zkomilaval, mam distribuci Gentoo, verzi jadra 2.6.14.2

kdyz dam, tak.....

# lsusb
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 004: ID 03f0:0405 Hewlett-Packard ScanJet 3400cse
Bus 001 Device 002: ID 045e:0039 Microsoft Corp. IntelliMouse Optical
Bus 001 Device 001: ID 0000:0000

# sane-find-scanner

  # sane-find-scanner will now attempt to detect your scanner. If the
  # result is different from what you expected, first make sure your
  # scanner is powered up and properly connected to your computer.

  # No SCSI scanners found. If you expected something different, make sure that
  # you have loaded a SCSI driver for your SCSI adapter.

  # No USB scanners found. If you expected something different, make sure that
  # you have loaded a driver for your USB host controller and have installed a
  # kernel scanner module.

  # Not checking for parallel port scanners.

  # Most Scanners connected to the parallel port or other proprietary ports
  # can't be detected by this program.

# scanimage -L

No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).

byl bych rad kdyby mi nekdo poradil

Na otázku zatím nikdo bohužel neodpověděl.