AbcLinuxu:/ Poradna / Linuxová poradna / ATI drivery a OpenGL

Štítky: ATI, balíčkovací systémy, desktop, grafické karty, grafika, kernel, Linux, OpenGL, ovladače, SUSE, X11, YaST, 3D

Dotaz: ATI drivery a OpenGL

6.11.2006 21:48 kolage
ATI drivery a OpenGL

Přečteno: 889×

Odpovědět | Admin

Nazdar,

mam SUSE Linux 10.1 Enterprise Desktop, nainstaloval jsem ze stranky www2.ati.com (v 8.26.18) ovladace pres Yast. Vsechno funguje - Xgl, efekty plochy, 3D akcelerace. Ale... když chci zapnout ATI control center napise mi to "Driver does not provide the FireGL X11 extensions!". Nemuzu tedy vubec vlezt do nastaveni, a co je jeste horsi, kdyz sem si nainstaloval CEDEGU, tak mi pri testech hlasi, ze OpenGL test FAILED... Nemuzu zapnout zadnou 3D aplikaci...Potrebuju pomoct, diky predem...

Nástroje: Začni sledovat (0) ?

Odpovědi

6.11.2006 21:56 kolage
Rozbalit Rozbalit vše ATI drivery a OpenGL

jeste...mam grafiku Radeon 9550

6.11.2006 21:58 Luboš Doležel (Doli) | skóre: 98 | blog: Doliho blog | Kladensko
Rozbalit Rozbalit vše Re: ATI drivery a OpenGL

Podle mě by to fungovalo, kdybyste vypnul Xgl.

Jak to zprovoznit i s Xgl už se tu někde řešilo.

6.11.2006 22:00 sir Turbis | skóre: 19 | Varnsdorf
Rozbalit Rozbalit vše Re: ATI drivery a OpenGL

Sel by hodit přímo link na diskusi? já ho hledal a nenašel a řeším stejný problém.. navíc mi nejdou efekty..:(

Don't hurry up, death is faster!

6.11.2006 21:58 sir Turbis | skóre: 19 | Varnsdorf
Rozbalit Rozbalit vše Re: ATI drivery a OpenGL

Máš v xorg.conf toto? :

 Section "dri"
      Mode 0666
      EndSection

      Load  "dri"
      Load  "glx"

Section "Device"

    # unsupported card
    #VideoRam    262144
    # Insert Clocks lines here if appropriate
      Identifier  "x1900"
      Driver      "fglrx"
EndSection

Don't hurry up, death is faster!

7.11.2006 16:36 kolage
Rozbalit Rozbalit vše Re: ATI drivery a OpenGL

Zdar tak tohle je muj xorg.conf...

...

Section "Files"
  FontPath     "/usr/X11R6/lib/X11/fonts/misc:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/local"
  FontPath     "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/Type1"
  FontPath     "/usr/X11R6/lib/X11/fonts/URW"
  FontPath     "/usr/X11R6/lib/X11/fonts/Speedo"
  FontPath     "/usr/X11R6/lib/X11/fonts/PEX"
  FontPath     "/usr/X11R6/lib/X11/fonts/cyrillic"
  FontPath     "/usr/X11R6/lib/X11/fonts/latin2/misc:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/latin2/75dpi:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/latin2/100dpi:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/latin2/Type1"
  FontPath     "/usr/X11R6/lib/X11/fonts/latin7/75dpi:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/baekmuk:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/japanese:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/kwintv"
  FontPath     "/usr/X11R6/lib/X11/fonts/truetype"
  FontPath     "/usr/X11R6/lib/X11/fonts/uni:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/CID"
  FontPath     "/usr/X11R6/lib/X11/fonts/ucs/misc:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/ucs/75dpi:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/ucs/100dpi:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/hellas/misc:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/hellas/75dpi:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/hellas/100dpi:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/hellas/Type1"
  FontPath     "/usr/X11R6/lib/X11/fonts/misc/sgi:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/xtest"
  FontPath     "/opt/kde3/share/fonts"
  InputDevices "/dev/gpmdata"
  InputDevices "/dev/input/mice"
EndSection

Section "Module"
  Load         "dbe"
  Load         "type1"
  Load         "freetype"
  Load         "extmod"
  Load         "glx"
  Load         "v4l"
  Load         "dri"
EndSection

Section "ServerFlags"
  Option       "AllowMouseOpenFail" "on"
EndSection

Section "InputDevice"
  Driver       "kbd"
  Identifier   "Keyboard[0]"
  Option       "Protocol" "Standard"
  Option       "XkbLayout" "cz,us"
  Option       "XkbModel" "pc104"
  Option       "XkbOptions" "grp:shift_toggle"
  Option       "XkbRules" "xfree86"
EndSection

Section "InputDevice"
  Driver       "mouse"
  Identifier   "Mouse[1]"
  Option       "Buttons" "12"
  Option       "Device" "/dev/input/mice"
  Option       "Name" "A4 Tech Wireless Battery Free Optical Mouse"
  Option       "Protocol" "explorerps/2"
  Option       "Vendor" "Sysp"
  Option       "ZAxisMapping" "4 5"
EndSection


Section "Monitor"
  Option       "CalcAlgorithm" "XServerPool"
  DisplaySize  370 270
  HorizSync    30-96
  Identifier   "Monitor[0]"
  ModelName    "BELINEA BELINEA 106075"
  Option       "DPMS"
  VendorName   "MAX"
  VertRefresh  43-150
  UseModes     "Modes[0]"
EndSection


Section "Modes"
  Identifier   "Modes[0]"
EndSection


Section "Device"
  BoardName    "RADEON 9550 (RV350 4153)"
  BusID        "1:0:0"
  Driver       "fglrx"
  Identifier   "Device[0]"
  #Option       "NoDDC"
  Option       "UseInternalAGPGART" "no"
  Option       "no_accel" "no"
  Option       "no_dri" "no"
  Option       "mtrr" "off"
  Option       "ScreenOverlap" "0"
  Option       "GammaCorrectionI" "0x00000000"
  Option       "GammaCorrectionII" "0x00000000"
  Option       "Capabilities" "0x00000000"
  Option       "CapabilitiesEx" "0x00000000"
  Option       "VideoOverlay" "on"
  Option       "OpenGLOverlay" "off"
  Option       "CenterMode" "off"
  Option       "PseudoColorVisuals" "off"
  Option       "Stereo" "off"
  Option       "StereoSyncEnable" "1"
  Option       "FSAAEnable" "no"
  Option       "FSAAScale" "1"
  Option       "FSAADisableGamma" "no"
  Option       "FSAACustomizeMSPos" "no"
  Option       "FSAAMSPosX0" "0.000000"
  Option       "FSAAMSPosY0" "0.000000"
  Option       "FSAAMSPosX1" "0.000000"
  Option       "FSAAMSPosY1" "0.000000"
  Option       "FSAAMSPosX2" "0.000000"
  Option       "FSAAMSPosY2" "0.000000"
  Option       "FSAAMSPosX3" "0.000000"
  Option       "FSAAMSPosY3" "0.000000"
  Option       "FSAAMSPosX4" "0.000000"
  Option       "FSAAMSPosY4" "0.000000"
  Option       "FSAAMSPosX5" "0.000000"
  Option       "FSAAMSPosY5" "0.000000"
  Option       "UseFastTLS" "0"
  Option       "BlockSignalsOnLock" "on"
  Option       "ForceGenericCPU" "no"
  Option       "KernelModuleParm" "agplock=0"
  VendorName   "ATI"
  Option       "EnablePrivateBackZ" "no"
EndSection


Section "Screen"
  DefaultDepth 24
  SubSection "Display"
    Depth      15
    Modes      "1280x1024" "1152x864" "1024x768" "800x600" "768x576" 
  EndSubSection
  SubSection "Display"
    Depth      16
    Modes      "1280x1024" "1152x864" "1024x768" "800x600" "768x576" 
  EndSubSection
  SubSection "Display"
    Depth      24
    Modes      "1280x1024" "1152x864" "1024x768" "800x600" "768x576" 
  EndSubSection
  SubSection "Display"
    Depth      8
    Modes      "1280x1024" "1152x864" "1024x768" "800x600" "768x576" 
  EndSubSection
  Device       "Device[0]"
  Identifier   "Screen[0]"
  Monitor      "Monitor[0]"
EndSection


Section "ServerLayout"
  Identifier   "Layout[all]"
  InputDevice  "Keyboard[0]" "CoreKeyboard"
  InputDevice  "Mouse[1]" "CorePointer"
  Screen       "Screen[0]"
EndSection


Section "DRI"
    Group      "video"
    Mode       0660
EndSection

Section "Extensions"
  Option       "DAMAGE" "no"
EndSection

7.11.2006 17:08 kolage
Rozbalit Rozbalit vše Re: ATI drivery a OpenGL

no takze sem to rozjel v pohode, kdyz sem vypnul XGL...ale neslo by to nejak i s tim ??? ja sem na tom hrozne zavisly !!! :-)

V tech clancich sem to nikde nenasel...

9.11.2006 16:41 pepan
Rozbalit Rozbalit vše Re: ATI drivery a OpenGL

neviem to uplne isto na 100%, ale pod XGL nebezi direct rendering, pretotoze toto vyuziva prave XGL, ak pouzijete AIGLX namiesto XGL mal by byt aj direct rendering pristupny pretoze AIGLX je v Xkach ako extension a XGL tusim bezi nad Xkami ako dalsi server alebo aplikacia ... :)

Založit nové vlákno • Nahoru

Tiskni Sdílej: