Dotaz: Wine 0.9.29 neslape pod Slackware10

[./matlak]

Dobry den. Pokousim se rozchodit Wine pod linuxem,konkretne pod Slackwarem desitkou z WM Gnome 2.6. Rucni instalace (./configure,make,make install) u mne trvala neco pres dve a pul hodiny (!), automatizovana trvala podstatne kratsi dobu, ale to je nepodstatne.
Problem je v tom, ze pokud chci spustit neco pod winem, nebo jenom winecfg, spusti se pouze wine-preloader, ktery neustale chrli chyby (unhandled page fault,Unhandled exception: page fault on write access to 0x003ffd80 in 32-bit code (0x60dc76c5),<register EAX not in topmost frame>...) a behem sesti minut (pokud ho do te doby nezabiju) zacpe kompletne 128 MB RAM a 520 MB swapu, pricemz system zatuhne a je nutno jej restartovat...
Setkal jste se nekdo z podobnym problemem??
Moc linuxu nerozumim, ale na druhe masine, kde mam Mandrake 10.2 a KDE 3.3 (a prakticky stejny hardware), jsem wine nainstaloval rucne za par minut a vsechny win programy ktery potrebuju bezproblemu rozchodim...

Odpovědi

[./matlak]

Sorry za obtezovani, jeste posilam vypis konzole (treba by z z toho mohl nekdo neco poznat)

bash-2.05b$ winecfg
wine: Unhandled page fault on write access to 0x003ffd80 at address 0x60dc76c5 (thread 0009), starting debugger...
wine: Unhandled page fault on write access to 0x003ffd80 at address 0x609026c5 (thread 000b), starting debugger...
wine: Unhandled page fault on write access to 0x003ffd80 at address 0x609026c5 (thread 000d), starting debugger...
fixme:dbghelp:SymLoadModule Should have successfully loaded debug information for image c:\windows\system32\explorer.exe
couldn't load main module (5)
fixme:dbghelp:SymLoadModule Should have successfully loaded debug information for image DLL_0x60970000
fixme:dbghelp:SymLoadModule Should have successfully loaded debug information for image DLL_0x60710000
fixme:dbghelp:SymLoadModule Should have successfully loaded debug information for image DLL_0x604b0000
fixme:dbghelp:SymLoadModule Should have successfully loaded debug information for image DLL_0x605d0000
fixme:dbghelp:SymLoadModule Should have successfully loaded debug information for image DLL_0x60650000
fixme:dbghelp:SymLoadModule Should have successfully loaded debug information for image DLL_0x60330000
fixme:dbghelp:SymLoadModule Should have successfully loaded debug information for image DLL_0x60280000
fixme:dbghelp:SymLoadModule Should have successfully loaded debug information for image DLL_0x60480000
Process of pid=000c has terminated
No process loaded, cannot execute 'echo Modules:'
Cannot get info on module while no process is loaded
No process loaded, cannot execute 'echo Threads:'
process  tid      prio (all id:s are in hex)
00000012
        00000013    0
00000010
        00000011    0
0000000a
        0000000b    0
00000008
        00000009    0
Unhandled exception: page fault on write access to 0x003ffd80 in 32-bit code (0x609026c5).
Register dump:
 CS:0023 SS:002b DS:002b ES:002b FS:1007 GS:0000
 EIP:609026c5 ESP:0034ebc0 EBP:0034ef18 EFLAGS:00210212(   - 00      - RIA1)
 EAX:0034f040 EBX:60909bc0 ECX:60014d80 EDX:003fffff
 ESI:60014900 EDI:003ffd80
Stack dump:
0x0034ebc0:  0034ebf0 60908624 0034ebf0 0034ebec
0x0034ebd0:  00000000 00000000 00000000 00000000
0x0034ebe0:  000000a9 00000000 0034ee74 0000001f
0x0034ebf0:  4d203823 4a206e6f 31206e75 39312034
0x0034ec00:  3a39303a 50203133 32205444 00343030
0x0034ec10:  00000000 00000000 00000000 00000000
0200: sel=1007 base=7ffdc000 limit=00001fff 32-bit rw-
Backtrace:
=>1 0x609026c5 in libpthread.so.0 (+0x76c5) (0x0034ef18)
  2 0x609085b5 in libpthread.so.0 (+0xd5b5) (0x0034ef28)
  3 0x608febd9 in libpthread.so.0 (+0x3bd9) (0x0034ef38)
  4 0x6000a98e in ld-linux.so.2 (+0xa98e) (0x0034ef68)
  5 0x6000ab2a _dl_init+0x15a() in ld-linux.so.2 (0x0034efa8)
bash-2.05b$   6 0x6024624e in libc.so.6 (+0x10924e) (0x0034f018)
  7 0x6000a7d6 _dl_catch_error+0x76() in ld-linux.so.2 (0x0034f118)
  8 0x602466bc _dl_open+0x5c() in libc.so.6 (0x0034f178)
  9 0x6026cef8 GLIBC_2+0xef8() in libdl.so.2 (0x0034f188)
  10 0x6000a7d6 _dl_catch_error+0x76() in ld-linux.so.2 (0x0034f288)
  11 0x6026d2f6 in libdl.so.2 (+0x12f6) (0x0034f2b8)
  12 0x6026cf44 GLIBC_2+0xf44() in libdl.so.2 (0x0034f2d8)
wine: Unhandled page fault on read access to 0x00000000 at address 0x601b5613 (thread 0013), starting debugger...
fixme:dbghelp:SymLoadModule Should have successfully loaded debug information for image c:\windows\system32\winedbg.exe
couldn't load main module (5)
fixme:dbghelp:SymLoadModule Should have successfully loaded debug information for image DLL_0x60510000
fixme:dbghelp:SymLoadModule Should have successfully loaded debug information for image DLL_0x604d0000
fixme:dbghelp:SymLoadModule Should have successfully loaded debug information for image DLL_0x60460000
fixme:dbghelp:SymLoadModule Should have successfully loaded debug information for image DLL_0x60330000
fixme:dbghelp:SymLoadModule Should have successfully loaded debug information for image DLL_0x60280000
fixme:dbghelp:SymLoadModule Should have successfully loaded debug information for image DLL_0x60490000
Process of pid=0012 has terminated
No process loaded, cannot execute 'echo Modules:'
Cannot get info on module while no process is loaded
No process loaded, cannot execute 'echo Threads:'
process  tid      prio (all id:s are in hex)

...mezitim jsem dal na druhem shellu kill jinak by to trvalo donekonecna (tedy do zaplneni pameti)...

[David Watzke]

Slackware není zrovna distro pro začátečníky, proč sis ho vybral?

[./matlak]

Tak jsem to vyřešil.
Trvalo mi to dlouho. Nepomohl ani uprgade jádra na 2.6.19, ani upgrade GlibC na 2.4.. Nakonec jsem prostě "downgradoval" Wine na verzi 0.9.14 a šlape to..
proč ta ..29 na slacku 10.0 nejede nechápu.. a je mi to jedno

[Tomas]

na slackware 11 mi ide wine 0.9.29 v poriadku a uz mi ide skoro kazda hra :)