Dotaz: nefunkci tiskarna | foomatic-rip failed CUPS

[Filip]

Dobry vecer, Prave jsem nainstaloval CUPS a tiskarnu NEC PINWRITER P7 plus (pripojena pres LPT). Nastavil jsem ji pres webove rozhrani CUPSu, ale pri tisknuti testovaci stranky se obevi hlaska "/usr/libexec/cups/filter/foomatic-rip failed". Kdyz pro tuhle tiskarnu zvolim ovladac RAW tak cosi tiskne (radky zacinajici %%). Nevite nekdo prosim v cem by mohla byt chyba? A jak to spravit? =)

Odpovědi

[CIJOML]

http://openprinting.org/show_printer.cgi?recnum=NEC-PinWriter_P7

[Filip]

Dekuji, skousel jsem tiskarnu nastavit i podle toho PPD co je natech strankach, ale porad ta stejna chyba, a tiskarna netiskne.

Jeste pridavam log.

localhost filip # tail /var/log/cups/error_log
I [12/Feb/2007:12:17:26 +0100] Started "/usr/libexec/cups/cgi-bin/printers.cgi" (pid=5172)
I [12/Feb/2007:12:17:27 +0100] Adding start banner page "none" to job 8.
I [12/Feb/2007:12:17:27 +0100] Adding end banner page "none" to job 8.
I [12/Feb/2007:12:17:27 +0100] Job 8 queued on "nec-snad" by "root".
I [12/Feb/2007:12:17:27 +0100] Started filter /usr/libexec/cups/filter/pstops (PID 5173) for job 8.
I [12/Feb/2007:12:17:27 +0100] Started filter /usr/libexec/cups/filter/foomatic-rip (PID 5174) for job 8.
I [12/Feb/2007:12:17:27 +0100] Started backend /usr/libexec/cups/backend/parallel (PID 5175) for job 8.
E [12/Feb/2007:12:17:28 +0100] PID 5174 (/usr/libexec/cups/filter/foomatic-rip) stopped with status 3!
I [12/Feb/2007:12:17:28 +0100] Hint: Try setting the LogLevel to "debug" to find out more.
I [12/Feb/2007:12:17:29 +0100] Started "/usr/libexec/cups/cgi-bin/printers.cgi" (pid=5183)

[Vaclav Peroutka]

A mne to na SuSE10 dela taky a taky mi to nefunguje (a je to pokracovani threadu stareho asi 2 mesice, bohuzel drive jsem se k tomu nedostal...).

A s debug levelem (mam CUPS-1.2.7 cerstve kompilovany) dostanu tohleto:

D [13/Feb/2007:22:12:55 +0100] cupsdAcceptClient: 4 from localhost (Domain)
D [13/Feb/2007:22:12:55 +0100] cupsdReadClient: 4 POST /printers/canonbjc430 HTTP/1.1
D [13/Feb/2007:22:12:55 +0100] cupsdAuthorize: No authentication data provided.
D [13/Feb/2007:22:12:55 +0100] Print-Job ipp://localhost:631/printers/canonbjc430
D [13/Feb/2007:22:12:55 +0100] print_job: request file type is application/postscript.
D [13/Feb/2007:22:12:55 +0100] add_job: requesting-user-name="root"
D [13/Feb/2007:22:12:55 +0100] Adding default job-sheets values "none,none"...
I [13/Feb/2007:22:12:55 +0100] Adding start banner page "none" to job 10.
D [13/Feb/2007:22:12:55 +0100] Discarding unused job-created event...
I [13/Feb/2007:22:12:55 +0100] Adding end banner page "none" to job 10.
I [13/Feb/2007:22:12:55 +0100] Job 10 queued on "canonbjc430" by "root".
D [13/Feb/2007:22:12:55 +0100] Job 10 hold_until = 0
D [13/Feb/2007:22:12:55 +0100] Discarding unused printer-state-changed event...
D [13/Feb/2007:22:12:55 +0100] job-sheets=none,none
D [13/Feb/2007:22:12:55 +0100] banner_page = 0
D [13/Feb/2007:22:12:55 +0100] [Job 10] argv[0]="canonbjc430"
D [13/Feb/2007:22:12:55 +0100] [Job 10] argv[1]="10"
D [13/Feb/2007:22:12:55 +0100] [Job 10] argv[2]="root"
D [13/Feb/2007:22:12:55 +0100] [Job 10] argv[3]="Test Page"
D [13/Feb/2007:22:12:55 +0100] [Job 10] argv[4]="1"
D [13/Feb/2007:22:12:55 +0100] [Job 10] argv[5]="job-uuid=urn:uuid:fc86d7cf-b233-3617-5897-2360dd86609b"
D [13/Feb/2007:22:12:55 +0100] [Job 10] argv[6]="/usr/var/spool/cups/d00010-001"
D [13/Feb/2007:22:12:55 +0100] [Job 10] envp[0]="CUPS_CACHEDIR=/usr/var/cache/cups"
D [13/Feb/2007:22:12:55 +0100] [Job 10] envp[1]="CUPS_DATADIR=/usr/share/cups"
D [13/Feb/2007:22:12:55 +0100] [Job 10] envp[2]="CUPS_DOCROOT=/usr/share/doc/cups"
D [13/Feb/2007:22:12:55 +0100] [Job 10] envp[3]="CUPS_FONTPATH=/usr/share/cups/fonts"
D [13/Feb/2007:22:12:55 +0100] [Job 10] envp[4]="CUPS_REQUESTROOT=/usr/var/spool/cups"
D [13/Feb/2007:22:12:55 +0100] [Job 10] envp[5]="CUPS_SERVERBIN=/usr/lib/cups"
D [13/Feb/2007:22:12:55 +0100] [Job 10] envp[6]="CUPS_SERVERROOT=/usr/etc/cups"
D [13/Feb/2007:22:12:55 +0100] [Job 10] envp[7]="CUPS_STATEDIR=/usr/var/run/cups"
D [13/Feb/2007:22:12:55 +0100] [Job 10] envp[8]="PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [13/Feb/2007:22:12:55 +0100] [Job 10] envp[9]="SERVER_ADMIN=root@supermuf.site"
D [13/Feb/2007:22:12:55 +0100] [Job 10] envp[10]="SOFTWARE=CUPS/1.2.7"
D [13/Feb/2007:22:12:55 +0100] [Job 10] envp[11]="TMPDIR=/usr/var/spool/cups/tmp"
D [13/Feb/2007:22:12:55 +0100] [Job 10] envp[12]="USER=root"
D [13/Feb/2007:22:12:55 +0100] [Job 10] envp[13]="CUPS_SERVER=/usr/var/run/cups/cups.sock"
D [13/Feb/2007:22:12:55 +0100] [Job 10] envp[14]="CUPS_ENCRYPTION=IfRequested"
D [13/Feb/2007:22:12:55 +0100] [Job 10] envp[15]="CHARSET=utf-8"
D [13/Feb/2007:22:12:55 +0100] [Job 10] envp[16]="LANG=en"
D [13/Feb/2007:22:12:55 +0100] [Job 10] envp[17]="PPD=/usr/etc/cups/ppd/canonbjc430.ppd"
D [13/Feb/2007:22:12:55 +0100] [Job 10] envp[18]="RIP_MAX_CACHE=8m"
D [13/Feb/2007:22:12:55 +0100] [Job 10] envp[19]="CONTENT_TYPE=application/postscript"
D [13/Feb/2007:22:12:55 +0100] [Job 10] envp[20]="DEVICE_URI=parallel:/dev/lp0"
D [13/Feb/2007:22:12:55 +0100] [Job 10] envp[21]="PRINTER=canonbjc430"
D [13/Feb/2007:22:12:55 +0100] [Job 10] envp[22]="FINAL_CONTENT_TYPE=printer/canonbjc430"
I [13/Feb/2007:22:12:55 +0100] Started filter /usr/lib/cups/filter/pstops (PID 7650) for job 10.
I [13/Feb/2007:22:12:55 +0100] Started filter /usr/lib/cups/filter/foomatic-rip (PID 7651) for job 10.
I [13/Feb/2007:22:12:55 +0100] Started backend /usr/lib/cups/backend/parallel (PID 7652) for job 10.
D [13/Feb/2007:22:12:55 +0100] Discarding unused job-state event...
D [13/Feb/2007:22:12:55 +0100] cupsdProcessIPPRequest: 4 status_code=0 (successful-ok)
E [13/Feb/2007:22:12:55 +0100] PID 7650 (/usr/lib/cups/filter/pstops) stopped with status 1!
E [13/Feb/2007:22:12:55 +0100] [Job 10] Unable to open print file "/usr/var/spool/cups/d00010-001" - Permission denied
D [13/Feb/2007:22:12:55 +0100] [Job 10] backendRunLoop(print_fd=0, device_fd=4, use_bc=0)
D [13/Feb/2007:22:12:55 +0100] Discarding unused printer-state-changed event...
D [13/Feb/2007:22:12:56 +0100] cupsdCloseClient: 4
D [13/Feb/2007:22:12:56 +0100] [Job 10] foomatic-rip version $Revision: 3.48 $ running...
D [13/Feb/2007:22:12:56 +0100] [Job 10] Parsing PPD file ...
D [13/Feb/2007:22:12:56 +0100] [Job 10] *cupsFilter: "application/vnd.cups-postscript 0 foomatic-rip"

atd... aby to nebylo moc dlouhe.

Ten soubor /usr/var/spool/cups/d00010-001 tam fyzicky je, je to PostScript a ma uzivatele root:lp a prava 0640. CUPS bezi jako root. A ten pstops, jestli to dobre chapu, pod nejakym jinym uzivatelem. Ale pod jakym, to nevim. At delam, co delam, tak nedokazu zmenit prava na 0644, pak predpokladam,ze to pojede. Ale je to asi bezpecnostni nastaveni SuSE - na Slackwaru to nebylo. A nebo GS bezi pod jinym uzivatelem. Ale predpokladam,z e nejsem prvni, kdo ma ty problemy...

Vasek

[nooneanymore]

Jaký ghostscript tam máš nainstalovaný? Máš nainstalován foomatic?

[vaclavpe]

Ghostscript je original z SuSE 10 (myslim 8.15 a nejake drobne - ted to pred sebou nemam) Foomatic je cerstvy, stazeny...

Ale jak jsem psal, to vypada, ze je problem s pristupovymi pravy, ten soubor (ktery je v LOGu jako "Permission denied") tam fyzicky je a je to Postscript...

[vaclavpe]

Tak u mne se jiz problem vyresil. Pisu to takhle, protoze mi pripada, ze to zacalo fungovalo "samo od sebe". A to takhle:
- jak jsem jiz psal, mam Cups 1.2.7
- do cupsd.conf (najit ten spravny, ja ho mam v /usr/etc/ ; stary pro verzi 1.1.19 je v /etc/ ) jsem pridal User=lp \n Group=lp ; RunAsUser u noveho CUPS nefunguje
- na /usr/var/spool jsem nastavil prava 777, na /usr/var/spool/cups 777+s a uzivatele lp:lp
- restartoval jsem CUPS

V error_logu se objevilo, ze si CUPS opravil prava na svuj spool podle sve chuti - a svete div se, tiskarna zacala tisknout!

Pak jsem trochu experimentoval - foomatic-rip failed mi to psalo, kdyz jsem ji zkusil prepnout na grayscale tisk (protoze stejne mam jenom cerny inkoust). Takze mozna muze byt chybka jeste v nastaveni moznosti...

Vasek

[Dalibor Smolík]

Mám Debian, zatím jsem zprovoznil každou tiskárnu instalací balíčků foomatic*, cupsys a samba (client a server). Tiskárnu jsem nastavil přes Kdeprint jako lokální tiskárnu, nikoliv přes webové rozhraní. Do konfiguráku Samby jsem přidal sekci

[TISKARNA]
        path = /tmp
        guest ok = Yes
        printable = Yes
        use client driver = Yes
        default devmode = Yes

V případě instalace vzdálené tiskárny obdobně, jen jsem vybral tiskárnu přes SMB Windows, i když je na stroji s Linuxem .. Třeba tento postup pomůže, u SUSE to může být podobné

[vaclavpe]

No, dobre, ale ted nejde o Sambu, ale o CUPS... Pokud nejde CUPS, tak mi Samba nepomuze...

[nuff]

Já jsem na Debian etch r6 nainstaloval foo2zjs a už mi to tiskne Aspoň testovací stránku to vyjelo. Jo a měl jsem problém s HP LJ 1020

třeba to někomu pomůže:

http://foo2zjs.rkkda.com/

aspoň mě to pomhlo.