Přihlášení | Registrace

napište » Zprávičky

FFmpeg nechal smazat repozitář porušující LGPL

dnes 15:55 | Komunita

FFmpeg nechal kvůli porušení autorských práv odstranit z GitHubu jeden z repozitářů patřících čínské technologické firmě Rockchip. Důvodem bylo porušení LGPL ze strany Rockchipu. Rockchip byl FFmpegem na porušování LGPL upozorněn již téměř před dvěma roky.

🇨🇽 | Komentářů: 4

witr (why-is-this-running)

dnes 15:44 | Zajímavý software

K dispozici je nový CLI nástroj witr sloužící k analýze běžících procesů. Název je zkratkou slov why-is-this-running, 'proč tohle běží'. Klade si za cíl v 'jediném, lidsky čitelném, výstupu vysvětlit odkud daný spuštěný proces pochází, jak byl spuštěn a jaký řetězec systémů je zodpovědný za to, že tento proces právě teď běží'. Witr je napsán v jazyce Go.

🇨🇽 | Komentářů: 0

Yazi 25.12.29

dnes 15:33 | Zajímavý software

Yazi je správce souborů běžící v terminálu. Napsán je v programovacím jazyce Rust. Podporuje asynchronní I/O operace. Vydán byl v nové verzi 25.12.29. Instalovat jej lze také ze Snapcraftu.

Ladislav Hagara | Komentářů: 0

39C3 (Chaos Communication Congress)

26.12. 18:44 | Komunita

Od soboty do úterý probíhá v Hamburku konference 39C3 (Chaos Communication Congress) věnovaná také počítačové bezpečnosti nebo hardwaru. Program (jiná verze) slibuje řadu zajímavých přednášek. Streamy a záznamy budou k dispozici na media.ccc.de.

Ladislav Hagara | Komentářů: 0

Phoenix (Xserver)

26.12. 13:22 | Zajímavý software

Byl představen nový Xserver Phoenix, kompletně od nuly vyvíjený v programovacím jazyce Zig. Projekt Phoenix si klade za cíl být moderní alternativou k X.Org serveru.

🇨🇽 | Komentářů: 7

XLibre Xserver 25.1.0

26.12. 13:11 | Nová verze

XLibre Xserver byl 21. prosince vydán ve verzi 25.1.0, 'winter solstice release'. Od založení tohoto forku X.Org serveru se jedná o vůbec první novou minor verzi (inkrementovalo se to druhé číslo v číselném kódu verze).

🇨🇽 | Komentářů: 0

Wayback 0.3

26.12. 03:33 | Nová verze

Wayback byl vydán ve verzi 0.3. Wayback je "tak akorát Waylandu, aby fungoval Xwayland". Jedná se o kompatibilní vrstvu umožňující běh plnohodnotných X11 desktopových prostředí s využitím komponent z Waylandu. Cílem je nakonec nahradit klasický server X.Org, a tím snížit zátěž údržby aplikací X11.

Ladislav Hagara | Komentářů: 0

Ruby 4.0.0

25.12. 14:44 | Nová verze

Byla vydána verze 4.0.0 programovacího jazyka Ruby (Wikipedie). S Ruby Box a ZJIT. Ruby lze vyzkoušet na webové stránce TryRuby. U příležitosti 30. narozenin, první veřejná verze Ruby 0.95 byla oznámena 21. prosince 1995, proběhl redesign webových stránek.

Ladislav Hagara | Komentářů: 0

Krásné Vánoce

24.12. 02:11 | Komunita

Všem čtenářkám a čtenářům AbcLinuxu krásné Vánoce.

Ladislav Hagara | Komentářů: 30

Parrot OS 7.0

24.12. 02:00 | Nová verze

Byla vydána nová verze 7.0 linuxové distribuce Parrot OS (Wikipedie). S kódovým názvem Echo. Jedná se o linuxovou distribuci založenou na Debianu a zaměřenou na penetrační testování, digitální forenzní analýzu, reverzní inženýrství, hacking, anonymitu nebo kryptografii. Přehled novinek v příspěvku na blogu.

Ladislav Hagara | Komentářů: 0

Centrum | Napsat | Starší

navrhněte » Anketa

Kdo vám letos nadělí dárek?

Ježíšek (35%)

Santa Claus (1%)

Děda Mráz (20%)

La Befana (1%)

Odin (1%)

Laskakit (1%)

Někdo z rodiny (12%)

Já sám (12%)

Nikdo (16%)

Celkem 164 hlasů

Komentářů: 18, poslední 24.12. 15:29

Rozcestník

AbcLinuxu

HDmag.cz

AbcLinuxu:/ Poradna / Linuxová poradna / Problem s kompilaci rt2x00-2.0.0_beta3

Štítky: CVS, distribuce, Gentoo, Version Control System

Dotaz: Problem s kompilaci rt2x00-2.0.0_beta3

2.8.2007 03:49 andering | skóre: 6 | Bystřice pod Hostýnem
Problem s kompilaci rt2x00-2.0.0_beta3

Přečteno: 621×

Odpovědět | Admin

Ahoj mam problem s kompilaci na GEntoo a to s balikem net-wireless/rt2x00-2.0.0_beta3

Kernel: linux-2.6.21-gentoo-r4

Omlouvam se nevim co ztoho je dulezite tak sem to sem dal cele :

  Preparing rt2x00core module
  CC [M]  /var/tmp/portage/net-wireless/rt2x00-2.0.0_beta3/work/rt2x00-2.0.0-b3/rt2x00core.o
  CC [M]  /var/tmp/portage/net-wireless/rt2x00-2.0.0_beta3/work/rt2x00-2.0.0-b3/rt2400pci.o
In file included from include/asm/thread_info.h:16,
                 from include/linux/thread_info.h:21,
                 from include/linux/preempt.h:9,
                 from include/linux/spinlock.h:49,
                 from include/linux/seqlock.h:29,
                 from include/linux/time.h:7,
                 from include/linux/skbuff.h:19,
                 from include/linux/if_ether.h:111,
                 from include/linux/etherdevice.h:27,
                 from /var/tmp/portage/net-wireless/rt2x00-2.0.0_beta3/work/rt2x00-2.0.0-b3/ieee80211/net/ieee80211_compat.h:9,
                 from (command line):1:
include/asm/processor.h:82: error: ‘CONFIG_X86_L1_CACHE_SHIFT’ undeclared here (not in a function)
include/asm/processor.h:82: error: requested alignment is not a constant
In file included from include/linux/sched.h:51,
                 from include/linux/utsname.h:35,
                 from include/asm/elf.h:12,
                 from include/linux/elf.h:7,
                 from include/linux/module.h:15,
                 from include/linux/textsearch.h:9,
                 from include/linux/skbuff.h:26,
                 from include/linux/if_ether.h:111,
                 from include/linux/etherdevice.h:27,
                 from /var/tmp/portage/net-wireless/rt2x00-2.0.0_beta3/work/rt2x00-2.0.0-b3/ieee80211/net/ieee80211_compat.h:9,
                 from (command line):1:
include/linux/jiffies.h:18:5: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:20:7: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:22:7: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:24:7: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:26:7: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:28:7: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:30:7: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:33:3: error: #error You lose.
include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:225:31: error: division by zero in #if
include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:225:31: error: division by zero in #if
include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:225:31: error: division by zero in #if
include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:225:31: error: division by zero in #if
include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:225:31: error: division by zero in #if
include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:225:31: error: division by zero in #if
include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:225:31: error: division by zero in #if
include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:225:31: error: division by zero in #if
include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:225:31: error: division by zero in #if
include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:225:31: error: division by zero in #if
include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:225:31: error: division by zero in #if
include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:225:31: error: division by zero in #if
include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:225:31: error: division by zero in #if
include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:225:31: error: division by zero in #if
include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:225:31: error: division by zero in #if
include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:225:31: error: division by zero in #if
include/linux/jiffies.h:225:46: warning: "SHIFT_HZ" is not defined
In file included from include/asm/thread_info.h:16,
                 from include/linux/thread_info.h:21,
                 from include/linux/preempt.h:9,
                 from include/linux/spinlock.h:49,
                 from include/linux/seqlock.h:29,
                 from include/linux/time.h:7,
                 from include/linux/skbuff.h:19,
                 from include/linux/if_ether.h:111,
                 from include/linux/etherdevice.h:27,
                 from /var/tmp/portage/net-wireless/rt2x00-2.0.0_beta3/work/rt2x00-2.0.0-b3/ieee80211/net/ieee80211_compat.h:9,
                 from (command line):1:
include/asm/processor.h:82: error: ‘CONFIG_X86_L1_CACHE_SHIFT’ undeclared here (not in a function)
include/asm/processor.h:82: error: requested alignment is not a constant
In file included from include/linux/utsname.h:35,
                 from include/asm/elf.h:12,
                 from include/linux/elf.h:7,
                 from include/linux/module.h:15,
                 from include/linux/textsearch.h:9,
                 from include/linux/skbuff.h:26,
                 from include/linux/if_ether.h:111,
                 from include/linux/etherdevice.h:27,
                 from /var/tmp/portage/net-wireless/rt2x00-2.0.0_beta3/work/rt2x00-2.0.0-b3/ieee80211/net/ieee80211_compat.h:9,
                 from (command line):1:
include/linux/sched.h:272:16: warning: "CONFIG_SPLIT_PTLOCK_CPUS" is not defined
In file included from include/linux/utsname.h:35,
                 from include/asm/elf.h:12,
                 from include/linux/elf.h:7,
                 from include/linux/module.h:15,
                 from include/linux/textsearch.h:9,
                 from include/linux/skbuff.h:26,
                 from include/linux/if_ether.h:111,
                 from include/linux/etherdevice.h:27,
                 from /var/tmp/portage/net-wireless/rt2x00-2.0.0_beta3/work/rt2x00-2.0.0-b3/ieee80211/net/ieee80211_compat.h:9,
                 from (command line):1:
include/linux/sched.h: In function ‘dequeue_signal_lock’:
include/linux/sched.h:1310: warning: implicit declaration of function ‘local_irq_save’
include/linux/sched.h:1312: warning: implicit declaration of function ‘local_irq_restore’
In file included from include/linux/sched.h:51,
                 from include/linux/utsname.h:35,
                 from include/asm/elf.h:12,
                 from include/linux/elf.h:7,
                 from include/linux/module.h:15,
                 from include/linux/textsearch.h:9,
                 from include/linux/skbuff.h:26,
                 from include/linux/if_ether.h:111,
                 from include/linux/etherdevice.h:27,
                 from /var/tmp/portage/net-wireless/rt2x00-2.0.0_beta3/work/rt2x00-2.0.0-b3/ieee80211/net/ieee80211_compat.h:9,
                 from (command line):1:
include/linux/jiffies.h:18:5: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:20:7: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:22:7: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:24:7: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:26:7: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:28:7: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:30:7: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:33:3: error: #error You lose.
include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:225:31: error: division by zero in #if
include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:225:31: error: division by zero in #if
include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:225:31: error: division by zero in #if
include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:225:31: error: division by zero in #if
include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:225:31: error: division by zero in #if
include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:225:31: error: division by zero in #if
include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:225:31: error: division by zero in #if
include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:225:31: error: division by zero in #if
include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:225:31: error: division by zero in #if
include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:225:31: error: division by zero in #if
include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:225:31: error: division by zero in #if
include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:225:31: error: division by zero in #if
include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:225:31: error: division by zero in #if
include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:225:31: error: division by zero in #if
include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:225:31: error: division by zero in #if
include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined
include/linux/jiffies.h:225:31: error: division by zero in #if
include/linux/jiffies.h:225:46: warning: "SHIFT_HZ" is not defined
In file included from include/linux/module.h:21,
                 from include/linux/textsearch.h:9,
                 from include/linux/skbuff.h:26,
                 from include/linux/if_ether.h:111,
                 from include/linux/etherdevice.h:27,
                 from /var/tmp/portage/net-wireless/rt2x00-2.0.0_beta3/work/rt2x00-2.0.0-b3/ieee80211/net/ieee80211_compat.h:9,
                 from (command line):1:
include/asm/module.h:62:2: error: #error unknown processor family
In file included from include/asm/hardirq.h:5,
                 from include/linux/hardirq.h:7,
                 from include/linux/interrupt.h:11,
                 from include/linux/netdevice.h:568,
                 from include/linux/etherdevice.h:28,
                 from /var/tmp/portage/net-wireless/rt2x00-2.0.0_beta3/work/rt2x00-2.0.0-b3/ieee80211/net/ieee80211_compat.h:9,
                 from (command line):1:
include/linux/irq.h: At top level:
include/linux/irq.h:178: error: requested alignment is not a constant
In file included from include/linux/hardirq.h:7,
                 from include/linux/interrupt.h:11,
                 from include/linux/netdevice.h:568,
                 from include/linux/etherdevice.h:28,
                 from /var/tmp/portage/net-wireless/rt2x00-2.0.0_beta3/work/rt2x00-2.0.0-b3/ieee80211/net/ieee80211_compat.h:9,
                 from (command line):1:
include/asm/hardirq.h:12: error: requested alignment is not a constant
In file included from include/linux/netdevice.h:568,
                 from include/linux/etherdevice.h:28,
                 from /var/tmp/portage/net-wireless/rt2x00-2.0.0_beta3/work/rt2x00-2.0.0-b3/ieee80211/net/ieee80211_compat.h:9,
                 from (command line):1:
include/linux/interrupt.h: In function ‘cli’:
include/linux/interrupt.h:207: warning: implicit declaration of function ‘local_irq_disable’
include/linux/interrupt.h: In function ‘sti’:
include/linux/interrupt.h:211: warning: implicit declaration of function ‘local_irq_enable’
include/linux/interrupt.h: In function ‘save_flags’:
include/linux/interrupt.h:215: warning: implicit declaration of function ‘local_save_flags’
In file included from include/linux/utsname.h:35,
                 from include/asm/elf.h:12,
                 from include/linux/elf.h:7,
                 from include/linux/module.h:15,
                 from include/linux/textsearch.h:9,
                 from include/linux/skbuff.h:26,
                 from include/linux/if_ether.h:111,
                 from include/linux/etherdevice.h:27,
                 from /var/tmp/portage/net-wireless/rt2x00-2.0.0_beta3/work/rt2x00-2.0.0-b3/ieee80211/net/ieee80211_compat.h:9,
                 from (command line):1:
include/linux/sched.h:272:16: warning: "CONFIG_SPLIT_PTLOCK_CPUS" is not defined
In file included from include/linux/utsname.h:35,
                 from include/asm/elf.h:12,
                 from include/linux/elf.h:7,
                 from include/linux/module.h:15,
                 from include/linux/textsearch.h:9,
                 from include/linux/skbuff.h:26,
                 from include/linux/if_ether.h:111,
                 from include/linux/etherdevice.h:27,
                 from /var/tmp/portage/net-wireless/rt2x00-2.0.0_beta3/work/rt2x00-2.0.0-b3/ieee80211/net/ieee80211_compat.h:9,
                 from (command line):1:
include/linux/sched.h: In function ‘dequeue_signal_lock’:
include/linux/sched.h:1310: warning: implicit declaration of function ‘local_irq_save’
include/linux/sched.h:1312: warning: implicit declaration of function ‘local_irq_restore’
In file included from include/linux/module.h:21,
                 from include/linux/textsearch.h:9,
                 from include/linux/skbuff.h:26,
                 from include/linux/if_ether.h:111,
                 from include/linux/etherdevice.h:27,
                 from /var/tmp/portage/net-wireless/rt2x00-2.0.0_beta3/work/rt2x00-2.0.0-b3/ieee80211/net/ieee80211_compat.h:9,
                 from (command line):1:
include/asm/module.h:62:2: error: #error unknown processor family
In file included from /var/tmp/portage/net-wireless/rt2x00-2.0.0_beta3/work/rt2x00-2.0.0-b3/rt2x00core.c:36:
/var/tmp/portage/net-wireless/rt2x00-2.0.0_beta3/work/rt2x00-2.0.0-b3/rt2x00core.h:251:38: error: macro "INIT_WORK" passed 3 arguments, but takes just 2
In file included from /var/tmp/portage/net-wireless/rt2x00-2.0.0_beta3/work/rt2x00-2.0.0-b3/rt2x00core.c:36:
/var/tmp/portage/net-wireless/rt2x00-2.0.0_beta3/work/rt2x00-2.0.0-b3/rt2x00core.h: In function ‘rt2x00_init_ring’:
/var/tmp/portage/net-wireless/rt2x00-2.0.0_beta3/work/rt2x00-2.0.0-b3/rt2x00core.h:251: error: ‘INIT_WORK’ undeclared (first use in this function)
/var/tmp/portage/net-wireless/rt2x00-2.0.0_beta3/work/rt2x00-2.0.0-b3/rt2x00core.h:251: error: (Each undeclared identifier is reported only once
/var/tmp/portage/net-wireless/rt2x00-2.0.0_beta3/work/rt2x00-2.0.0-b3/rt2x00core.h:251: error: for each function it appears in.)
/var/tmp/portage/net-wireless/rt2x00-2.0.0_beta3/work/rt2x00-2.0.0-b3/rt2x00core.h: In function ‘rt2x00_disable_ring’:
/var/tmp/portage/net-wireless/rt2x00-2.0.0_beta3/work/rt2x00-2.0.0-b3/rt2x00core.h:270: warning: passing argument 1 of ‘cancel_delayed_work’ from incompatible pointer type
/var/tmp/portage/net-wireless/rt2x00-2.0.0_beta3/work/rt2x00-2.0.0-b3/rt2x00core.c: In function ‘rt2x00_start_scan’:
/var/tmp/portage/net-wireless/rt2x00-2.0.0_beta3/work/rt2x00-2.0.0-b3/rt2x00core.c:914: warning: passing argument 2 of ‘queue_delayed_work’ from incompatible pointer type
/var/tmp/portage/net-wireless/rt2x00-2.0.0_beta3/work/rt2x00-2.0.0-b3/rt2x00core.c: In function ‘rt2x00_stop_scan’:
/var/tmp/portage/net-wireless/rt2x00-2.0.0_beta3/work/rt2x00-2.0.0-b3/rt2x00core.c:922: warning: passing argument 1 of ‘cancel_delayed_work’ from incompatible pointer type
/var/tmp/portage/net-wireless/rt2x00-2.0.0_beta3/work/rt2x00-2.0.0-b3/rt2x00core.c: In function ‘rt2x00_scan_periodic’:
/var/tmp/portage/net-wireless/rt2x00-2.0.0_beta3/work/rt2x00-2.0.0-b3/rt2x00core.c:996: warning: passing argument 2 of ‘queue_delayed_work’ from incompatible pointer type
In file included from include/asm/hardirq.h:5,
                 from include/linux/hardirq.h:7,
                 from include/linux/interrupt.h:11,
                 from include/linux/netdevice.h:568,
                 from include/linux/etherdevice.h:28,
                 from /var/tmp/portage/net-wireless/rt2x00-2.0.0_beta3/work/rt2x00-2.0.0-b3/ieee80211/net/ieee80211_compat.h:9,
                 from (command line):1:
include/linux/irq.h: At top level:
include/linux/irq.h:178: error: requested alignment is not a constant
In file included from include/linux/hardirq.h:7,
                 from include/linux/interrupt.h:11,
                 from include/linux/netdevice.h:568,
                 from include/linux/etherdevice.h:28,
                 from /var/tmp/portage/net-wireless/rt2x00-2.0.0_beta3/work/rt2x00-2.0.0-b3/ieee80211/net/ieee80211_compat.h:9,
                 from (command line):1:
include/asm/hardirq.h:12: error: requested alignment is not a constant
In file included from include/linux/netdevice.h:568,
                 from include/linux/etherdevice.h:28,
                 from /var/tmp/portage/net-wireless/rt2x00-2.0.0_beta3/work/rt2x00-2.0.0-b3/ieee80211/net/ieee80211_compat.h:9,
                 from (command line):1:
include/linux/interrupt.h: In function ‘cli’:
include/linux/interrupt.h:207: warning: implicit declaration of function ‘local_irq_disable’
include/linux/interrupt.h: In function ‘sti’:
include/linux/interrupt.h:211: warning: implicit declaration of function ‘local_irq_enable’
include/linux/interrupt.h: In function ‘save_flags’:
include/linux/interrupt.h:215: warning: implicit declaration of function ‘local_save_flags’
/var/tmp/portage/net-wireless/rt2x00-2.0.0_beta3/work/rt2x00-2.0.0-b3/rt2x00core.c: In function ‘rt2x00_link_up’:
/var/tmp/portage/net-wireless/rt2x00-2.0.0_beta3/work/rt2x00-2.0.0-b3/rt2x00core.c:1695: warning: passing argument 2 of ‘queue_delayed_work’ from incompatible pointer type
/var/tmp/portage/net-wireless/rt2x00-2.0.0_beta3/work/rt2x00-2.0.0-b3/rt2x00core.c: In function ‘rt2x00_link_down’:
/var/tmp/portage/net-wireless/rt2x00-2.0.0_beta3/work/rt2x00-2.0.0-b3/rt2x00core.c:1703: warning: passing argument 1 of ‘cancel_delayed_work’ from incompatible pointer type
/var/tmp/portage/net-wireless/rt2x00-2.0.0_beta3/work/rt2x00-2.0.0-b3/rt2x00core.c: In function ‘rt2x00_link_periodic’:
/var/tmp/portage/net-wireless/rt2x00-2.0.0_beta3/work/rt2x00-2.0.0-b3/rt2x00core.c:1803: warning: passing argument 2 of ‘queue_delayed_work’ from incompatible pointer type
/var/tmp/portage/net-wireless/rt2x00-2.0.0_beta3/work/rt2x00-2.0.0-b3/rt2x00core.c: In function ‘rt2x00_open’:
/var/tmp/portage/net-wireless/rt2x00-2.0.0_beta3/work/rt2x00-2.0.0-b3/rt2x00core.c:3763: warning: passing argument 2 of ‘queue_delayed_work’ from incompatible pointer type
In file included from include/asm/pci.h:6,
                 from include/linux/pci.h:744,
                 from /var/tmp/portage/net-wireless/rt2x00-2.0.0_beta3/work/rt2x00-2.0.0-b3/rt2400pci.c:30:
include/linux/mm.h: In function ‘lowmem_page_address’:
include/linux/mm.h:538: warning: implicit declaration of function ‘__page_to_pfn’
/var/tmp/portage/net-wireless/rt2x00-2.0.0_beta3/work/rt2x00-2.0.0-b3/rt2x00core.c:3910:59: error: macro "INIT_WORK" passed 3 arguments, but takes just 2
/var/tmp/portage/net-wireless/rt2x00-2.0.0_beta3/work/rt2x00-2.0.0-b3/rt2x00core.c: In function ‘rt2x00_core_probe’:
/var/tmp/portage/net-wireless/rt2x00-2.0.0_beta3/work/rt2x00-2.0.0-b3/rt2x00core.c:3910: error: ‘INIT_WORK’ undeclared (first use in this function)
/var/tmp/portage/net-wireless/rt2x00-2.0.0_beta3/work/rt2x00-2.0.0-b3/rt2x00core.c:3911:59: error: macro "INIT_WORK" passed 3 arguments, but takes just 2
make[3]: *** [/var/tmp/portage/net-wireless/rt2x00-2.0.0_beta3/work/rt2x00-2.0.0-b3/rt2x00core.o] Error 1
make[3]: *** Waiting for unfinished jobs....
include/linux/mm.h: At top level:
include/linux/mm.h:974: error: expected identifier or ‘(’ before numeric constant
In file included from include/linux/pci.h:744,
                 from /var/tmp/portage/net-wireless/rt2x00-2.0.0_beta3/work/rt2x00-2.0.0-b3/rt2400pci.c:30:
include/asm/pci.h: In function ‘pci_dac_dma_to_page’:
include/asm/pci.h:72: warning: implicit declaration of function ‘__pfn_to_page’
include/asm/pci.h:72: warning: return makes pointer from integer without a cast
/var/tmp/portage/net-wireless/rt2x00-2.0.0_beta3/work/rt2x00-2.0.0-b3/rt2400pci.c: In function ‘rt2x00_dev_radio_on’:
/var/tmp/portage/net-wireless/rt2x00-2.0.0_beta3/work/rt2x00-2.0.0-b3/rt2400pci.c:554: warning: passing argument 2 of ‘request_irq’ from incompatible pointer type
make[3]: *** [/var/tmp/portage/net-wireless/rt2x00-2.0.0_beta3/work/rt2x00-2.0.0-b3/rt2400pci.o] Error 1
make[2]: *** [_module_/var/tmp/portage/net-wireless/rt2x00-2.0.0_beta3/work/rt2x00-2.0.0-b3] Error 2
make[1]: *** [modules] Error 2
make: *** [rt2x00-debug] Error 2

dekuji

I think the hardest part of holding on is lettin go. ...A myslím že nejtěžěí na tom něčeho se držet je pustit se.

Nástroje: Začni sledovat (0) ?

Odpovědi

2.8.2007 09:58 Shadow | skóre: 25 | blog: Brainstorm
Rozbalit Rozbalit vše Re: Problem s kompilaci rt2x00-2.0.0_beta3

Na Gentoo sice odborník nejsem, ale tenhle balík je označený jako "hard masked", takže problémy se dají očekávat. Podle hlášek bych soudil, že modul je vytvořen pro jinou verzi jádra. Co zkusit balík "rt2x00-9999"? Ten "hard masked" není...

If we do not believe in freedom of speech for those we despise we do not believe in it at all.

2.8.2007 17:50 andering | skóre: 6 | Bystřice pod Hostýnem
Rozbalit Rozbalit vše Re: Problem s kompilaci rt2x00-2.0.0_beta3

OK dik, zkusil jsem rt2x00-9999 na jadru linux-2.6.22-gentoo a vznikl jiny problem. Nejprve to po me chtelo aby povolil v jadru CONFIG_NET_RADIO ,který tam není(od jadra 2.6.22 doslo k prejmenovani na CONFIG_WLAN_80211). Tak sem jednoduse (ikdyz myslim ze ne spravne) zapsal do linux/.config CONFIG_NET_RADIO , aby to proslo kontrolou... Avsak pri samotne kompilaci nastal jiny problem :

 * Preparing 80211 module
  CC [M]  /var/tmp/portage/net-wireless/rt2x00-9999/work/rt2x00-9999/eeprom_93cx6/eeprom_93cx6.o
  CC [M]  /var/tmp/portage/net-wireless/rt2x00-9999/work/rt2x00-9999/rt2x00dev.o
  CC [M]  /var/tmp/portage/net-wireless/rt2x00-9999/work/rt2x00-9999/rt2x00mac.o
/var/tmp/portage/net-wireless/rt2x00-9999/work/rt2x00-9999/rt2x00mac.c: In function ‘rt2x00mac_tx_rts_cts’:
/var/tmp/portage/net-wireless/rt2x00-9999/work/rt2x00-9999/rt2x00mac.c:61: warning: passing argument 2 of ‘ieee80211_ctstoself_get’ makes pointer from integer without a cast
/var/tmp/portage/net-wireless/rt2x00-9999/work/rt2x00-9999/rt2x00mac.c:61: warning: passing argument 3 of ‘ieee80211_ctstoself_get’ makes integer from pointer without a cast
/var/tmp/portage/net-wireless/rt2x00-9999/work/rt2x00-9999/rt2x00mac.c:61: warning: passing argument 4 of ‘ieee80211_ctstoself_get’ makes pointer from integer without a cast
/var/tmp/portage/net-wireless/rt2x00-9999/work/rt2x00-9999/rt2x00mac.c:61: warning: passing argument 5 of ‘ieee80211_ctstoself_get’ from incompatible pointer type
/var/tmp/portage/net-wireless/rt2x00-9999/work/rt2x00-9999/rt2x00mac.c:61: error: too many arguments to function ‘ieee80211_ctstoself_get’
/var/tmp/portage/net-wireless/rt2x00-9999/work/rt2x00-9999/rt2x00mac.c:65: warning: passing argument 2 of ‘ieee80211_rts_get’ makes pointer from integer without a cast
/var/tmp/portage/net-wireless/rt2x00-9999/work/rt2x00-9999/rt2x00mac.c:65: warning: passing argument 3 of ‘ieee80211_rts_get’ makes integer from pointer without a cast
/var/tmp/portage/net-wireless/rt2x00-9999/work/rt2x00-9999/rt2x00mac.c:65: warning: passing argument 4 of ‘ieee80211_rts_get’ makes pointer from integer without a cast
/var/tmp/portage/net-wireless/rt2x00-9999/work/rt2x00-9999/rt2x00mac.c:65: warning: passing argument 5 of ‘ieee80211_rts_get’ from incompatible pointer type
/var/tmp/portage/net-wireless/rt2x00-9999/work/rt2x00-9999/rt2x00mac.c:65: error: too many arguments to function ‘ieee80211_rts_get’
make[3]: *** [/var/tmp/portage/net-wireless/rt2x00-9999/work/rt2x00-9999/rt2x00mac.o] Error 1
make[3]: *** Waiting for unfinished jobs....
make[2]: *** [_module_/var/tmp/portage/net-wireless/rt2x00-9999/work/rt2x00-9999] Error 2
make[1]: *** [modules] Error 2
make: *** [default] Error 2

I think the hardest part of holding on is lettin go. ...A myslím že nejtěžěí na tom něčeho se držet je pustit se.

2.8.2007 19:29 Shadow | skóre: 25 | blog: Brainstorm
Rozbalit Rozbalit vše Re: Problem s kompilaci rt2x00-2.0.0_beta3

Pár rad k tomuto problému je tady, zkuste, jestli vám nepomohou.

If we do not believe in freedom of speech for those we despise we do not believe in it at all.

2.8.2007 23:37 andering | skóre: 6 | Bystřice pod Hostýnem
Rozbalit Rozbalit vše Re: Problem s kompilaci rt2x00-2.0.0_beta3

Moc Dekuji, ale to vyresilo jen muj prvni problem ,ale to hlavni nic, no zkusim se zeptat i tam .

I think the hardest part of holding on is lettin go. ...A myslím že nejtěžěí na tom něčeho se držet je pustit se.

3.8.2007 11:01 andering | skóre: 6 | Bystřice pod Hostýnem
Rozbalit Rozbalit vše Re: Problem s kompilaci rt2x00-2.0.0_beta3

Tak sem nasel reseni zde: http://rt2x00.serialmonkey.com/phpBB2/viewtopic.php?t=4109 Jen by me zajimalo jestli je normalni ze se ten modul tak dlouho nacita cca 10 - 15 vterin

Dekuji za spolupraci

I think the hardest part of holding on is lettin go. ...A myslím že nejtěžěí na tom něčeho se držet je pustit se.

3.8.2007 14:41 crusoe
Rozbalit Rozbalit vše Re: Problem s kompilaci rt2x00-2.0.0_beta3

nie je to prilis , ja mam rt61 a trva to 0.5 sekundy , preco potrebujes rt2x00-9999 ? neskusal si iba rt2x00 ?

3.8.2007 17:08 andering | skóre: 6 | Bystřice pod Hostýnem
Rozbalit Rozbalit vše Re: Problem s kompilaci rt2x00-2.0.0_beta3

Uz se to samo zpravilo...rt2x00-9999 je rt2x00 akorat to 9999 je oznaceni verze...resp. ze se pouzije CVS pro stazeni. Teda doufam ze rikam pravdu :) dik.

I think the hardest part of holding on is lettin go. ...A myslím že nejtěžěí na tom něčeho se držet je pustit se.

Založit nové vlákno • Nahoru

Tiskni Sdílej:

Píšeme jinde

ISSN 1214-1267 www.czech-server.cz

Redakce | Inzerce | Podmínky použití | Osobní údaje