Dotaz: bind po upgrade nestartuje

[miso]

Dobry den,
upgradoval som bind na najnovsiu verziu (Centos 5).
Odvtedy mi nejde nastartovat
dostanem:

#/sbin/service named start
Starting named:
Error in named configuration:
/etc/named.conf:6: change directory to '/var/named' failed: file not found
/etc/named.conf:6: parsing failed
[FAILED]
#ll /var/named/
total 56
drwxr-x--- 5 root named 4096 Feb 7 2007 chroot
drwxrwx--- 2 named named 4096 Jul 9 00:43 data
-rw-r--r-- 1 named named 198 Jun 24 19:23 localdomain.zone
-rw-r--r-- 1 named named 195 Jun 24 19:23 localhost.zone
-rw-r--r-- 1 named named 415 Jun 24 19:23 named.broadcast
-rw-r--r-- 1 named named 2878 Jun 24 19:23 named.ca
-rw-r--r-- 1 named named 432 Jun 24 19:23 named.ip6.local
-rw-r--r-- 1 named named 433 Jun 24 19:23 named.local
-rw-r--r-- 1 named named 416 Jun 24 19:23 named.zero
drwxr-xr-x 6 root root 4096 Jun 1 2006 run-root
drwxrwx--- 2 named named 4096 Jul 9 00:43 slaves

v named.conf mam:
options {
directory "/var/named";
dump-file "/var/named/data/cache_dump.db";
statistics-file "/var/named/data/named_stats.txt";
};
#rpm -qa | grep bind
bind-9.2.4-28.0.1.el4
bind-utils-9.2.4-28.0.1.el4
bind-libs-9.2.4-28.0.1.el4
bind-devel-9.2.4-28.0.1.el4
ypbind-1.17.2-13
dakujem za kazdu radu

Odpovědi

[Chulda]

A co ls -al /var/named ? Prijde mi, ze nema prava pristupu do adresare.

ale jses si jisty, ze je to CentOS 5? viz vypis rpm - el4

[miso]

ospravedlnujem sa, mam centos masin viac, tato je na 4.6
#ls -al /var/named
total 72
drwxr-x--- 6 root named 4096 Jul 9 00:43 .
drwxr-xr-x 25 root root 4096 May 2 00:26 ..
drwxr-x--- 5 root named 4096 Feb 7 2007 chroot
drwxrwx--- 2 named named 4096 Jul 9 00:43 data
-rw-r--r-- 1 named named 198 Jun 24 19:23 localdomain.zone
-rw-r--r-- 1 named named 195 Jun 24 19:23 localhost.zone
-rw-r--r-- 1 named named 415 Jun 24 19:23 named.broadcast
-rw-r--r-- 1 named named 2878 Jun 24 19:23 named.ca
-rw-r--r-- 1 named named 432 Jun 24 19:23 named.ip6.local
-rw-r--r-- 1 named named 433 Jun 24 19:23 named.local
-rw-r--r-- 1 named named 416 Jun 24 19:23 named.zero
drwxr-xr-x 6 root root 4096 Jun 1 2006 run-root
drwxrwx--- 2 named named 4096 Jul 9 00:43 slaves

Este by bolo mozne dobre napisat ze na stroji bezi Plesk Control panel. S tymto konfigurakom to doteraz bezalo v pohode

[Chulda]

Plesk neznam, mam tu jen CentOS5, takze nemuzu ani porovnat. Asi bude nutne pustit demona rucne s debugem (viz man)

[miso]

zatial pomohlo spustit:
/usr/sbin/named -u named -c /etc/named.conf

toto je ale divne:

/sbin/service named status
rndc: connection to remote host closed
This may indicate that the remote server is using an older version of
the command protocol, this host is not authorized to connect,
or the key is invalid.

[tezkatlipoka]

nevim jestli to je pripad tohohle, ale CentOS jsem nedavno upgareoval, i bind, a muzu potvrdit ze si pri upgrade meni vlastnika /var/named - me to zpusobilo problem s ddns updates.

[miso]

dalo by sa poslat ako mate teraz nastavene prava v /var/named ?

[pupu]

Co mate v /etc/sysconfig/named ? Nevim jak CentOS, ale RedHati docela casto pouzivali chroot do /var/named, takze /var/named v named.conf znamenalo ve skutecnosti /var/named/chroot/var/named. Na druhou stranu si take vzpominam, ze po upgrade jsem mival problem s nastavenim pristupovych prav na /var/named...

[pht]

jojo, to vypada na chroot.

[miso]

v /etc/sysconfig/named mam:
ROOTDIR="/var/named/run-root"
OPTIONS="-c /etc/named.conf -u named"

[oron]

ak by to bolo chroot-om,
tak neviem ako pri 4.6 ale pri 5.2 su nejake problemy s chroot
vid: "Balíček bind-chroot obsahuje chybu, projevující se při upgrade. Dochází k přepsání všech uživatelských nastavení jako ROOTDIR=/some/other/path na defaultní ROOTDIR, "

http://wiki.centos.org/Manuals/ReleaseNotes/CentOS5.2/Czech#head-8847e0ccef6ded4042bc2f7b23d37d0da0731a80