Samsung SGH-Z810

Podpora:	kompletní
Ovladač:	v jádře

Identifikace pod Linuxem

ID 04e8:6601 Samsung Electronics Co., Ltd Z100 Mobile Phone

comgt info:

##### Wireless WAN Modem Configuration #####
Trying list of devices
Unable to locate default devices, try the -d option.
root@phtbook:/temp/comgt.0.32# ./comgt -d /dev/ttyACM0 info
##### Wireless WAN Modem Configuration #####
Product text:
====

Manufacturer: SAMSUNG ELECTRONICS CORPORATION
Revision: Z810RRHI1 
FTA SW VERSION: Z810.004
FTA HW VERSION: REV1.1
IMEI: 354326020193851
+GCAP: +CGSM,+DS,+ES
OK
====
Manufacturer:           SAMSUNG ELECTRONICS CORPORATION
IMEI and Serial Number: 354326020193851
Manufacturer's Revision: 
Z810RRHI
Hardware Revision:      

Network Locked:         
Customisation:          
Band settings:          (
)
APN:                    1,"IP","","",0,0
##### END #####

Postup zprovoznění pod Linuxem

• do /etc/modpobe.conf pridať options usb-storage option_zero_cd=2
• nainštalovať usb_modeswitch (1.1.0)
• odkomentovať v /etc/usb-modeswitch.conf časť pre "Samsung SGH-Z810 USB (with microSD card)"
• reštart udev

Po pripojení do USB sa vytvorí zariadenie /dev/ttyACM0. Ak nie, viď poznámka (blacklist modul visor).

wvdialconf:

Scanning your serial ports for a modem.

Modem Port Scan<*1>: S0   S1   S2   S3   
WvModem<*1>: Cannot get information for serial port.
ttyACM0<*1>: ATQ0 V1 E1 -- OK
ttyACM0<*1>: ATQ0 V1 E1 Z -- OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 -- OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- ERROR
ttyACM0<*1>: Modem Identifier: ATI -- Manufacturer: SAMSUNG ELECTRONICS CORPORATION
ttyACM0<*1>: Speed 4800: AT -- OK
ttyACM0<*1>: Speed 9600: AT -- OK
ttyACM0<*1>: Speed 19200: AT -- OK
ttyACM0<*1>: Speed 38400: AT -- OK
ttyACM0<*1>: Speed 57600: AT -- OK
ttyACM0<*1>: Speed 115200: AT -- OK
ttyACM0<*1>: Speed 230400: AT -- OK
ttyACM0<*1>: Speed 460800: AT -- OK
ttyACM0<*1>: Max speed is 460800; that should be safe.
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK

Found an USB modem on /dev/ttyACM0.
Modem configuration written to konfig.txt.
ttyACM0: Speed 460800; init "ATQ0 V1 E1 S0=0 &C1 &D2"

Poznámka

Odskúšané a sprevádzkované na Slackware64 13.0. Bolo treba pridať modul visor do blacklistu:
echo "blacklist visor" >> /etc/modprobe.d/blacklist.conf.

Dokument vytvořil: pol128, 26.2.2010 09:45 | Zobrazeno: 1332×