ALIGATOR BT2.0 BTD-IVT-05

Podpora:	kompletní
Ovladač:	v jádře

Technické parametry

Bluetooth 2.0 USB 2.0 adapter. Velmi maly (55 x 15 x 7 mm). Pruhledne modre pouzdro, cervena LED dioda indikujici stav. Dosah 10m (Class I). Bluetooth 2.0 (3 Mbps) je 3x rychlejsi nez Bluetooth 1.0 (1 Mbps); samozrejme ze vyssi rychlost muze byt pouzita jen mezi BT2.0 zarizenimi. BT2.0 je zpetne kompatibilni s BT1.0.

CSR chip (Cambridge Silicon Radio, Ltd).

Identifikace pod Linuxem

 

# lsusb
Bus 003 Device 004: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)

# cat /proc/bus/usb/devices
T:  Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  4 Spd=12  MxCh= 0
D:  Ver= 2.00 Cls=e0(unk. ) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0a12 ProdID=0001 Rev=19.58
C:* #Ifs= 2 Cfg#= 1 Atr=c0 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:  If#= 1 Alt= 0 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms

# hciconfig -a
hci0:   Type: USB
        BD Address: 00:11:B1:07:xx:xx ACL MTU: 384:8 SCO MTU: 64:8
        UP RUNNING PSCAN ISCAN
        RX bytes:2969 acl:61 sco:0 events:150 errors:0
        TX bytes:1753 acl:62 sco:0 commands:47 errors:0
        Features: 0xff 0xff 0x8f 0xfe 0x9b 0xf9 0x00 0x80
        Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
        Link policy: RSWITCH HOLD SNIFF PARK
        Link mode: SLAVE ACCEPT
        Name: 'ubuntu-0'
        Class: 0x3e0100
        Service Classes: Networking, Rendering, Capturing
        Device Class: Computer, Uncategorized
        HCI Ver: 2.0 (0x3) HCI Rev: 0x7a6 LMP Ver: 2.0 (0x3) LMP Subver: 0x7a6
        Manufacturer: Cambridge Silicon Radio (10)

# hciconfig hci0  version
hci0:    Type: USB
    BD Address: 00:11:B1:07:XX:XX:XX ACL MTU: 384:8 SCO MTU: 64:8
    HCI Ver: 2.0 (0x3) HCI Rev: 0x7a6 LMP Ver: 2.0 (0x3) LMP Subver: 0x7a6
    Manufacturer: Cambridge Silicon Radio (10)
 

# hciconfig hci0  revision
hci0:    Type: USB
    BD Address: 00:11:B1:07:XX:XX:XX ACL MTU: 384:8 SCO MTU: 64:8
    HCI 19.2
    Chip version: BlueCore4-ROM
    Max key size: 128 bit
    SCO mapping:  HCI

Postup zprovoznění pod Linuxem

Moduly: bluetooth, hci_uart, hci_usb, rfcomm, l2cap

Bluetooth stack: BlueZ

Poznámka

Testovano s Ubuntu 6.06.1, kernel 2.6.15-27.

Ubuntu nema prave dobrou podporu BT v GUI, ale z prikazove radky lze adapter rozchodit a pouzivat.

Dokument vytvořil: Petr Slansky, 6.1.2007 01:13 | Poslední úprava: Petr Slansky, 27.2.2011 15:09 | Historie změn | Zobrazeno: 2076×