Matshita DVD-RAM UJ-841S

Podpora:	kompletní
Ovladač:	v jádře

Technické parametry

ATAPI, IDE, zapisuje CD-R, CD-RW, DVD, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD+R Double Layer, 2MB Buffer, podpora Burnfree, write módy SAO, TAO, Restricted Overwrite

Identifikace pod Linuxem

hdparm -giItT /dev/hdc

/dev/hdc:
 HDIO_GETGEO failed: Inappropriate ioctl for device

 Model=MATSHITADVD-RAM UJ-841S, FwRev=1.00, SerialNo=
 Config={ Fixed Removeable DTR<=5Mbs DTR>10Mbs nonMagnetic }
 RawCHS=0/0/0, TrkSize=0, SectSize=0, ECCbytes=0
 BuffType=unknown, BuffSize=0kB, MaxMultSect=0
 (maybe): CurCHS=0/0/0, CurSects=0, LBA=yes, LBAsects=0
 IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
 PIO modes:  pio0 pio1 pio2 pio3 pio4 
 DMA modes:  sdma0 sdma1 sdma2 mdma0 mdma1 mdma2 
 UDMA modes: udma0 udma1 *udma2 
 AdvancedPM=no
 Drive conforms to: Unspecified:  ATA/ATAPI-3,4,5,6

 * signifies the current active mode


ATAPI CD-ROM, with removable media
        Model Number:       MATSHITADVD-RAM UJ-841S                 
        Serial Number:      
        Firmware Revision:  1.00    
Standards:
        Likely used CD-ROM ATAPI-1
Configuration:
        DRQ response: 50us.
        Packet size: 12 bytes
Capabilities:
        LBA, IORDY(can be disabled)
        DMA: sdma0 sdma1 sdma2 mdma0 mdma1 mdma2 udma0 udma1 *udma2 
             Cycle time: min=120ns recommended=120ns
        PIO: pio0 pio1 pio2 pio3 pio4 
             Cycle time: no flow control=240ns  IORDY flow control=120ns
HW reset results:
        CBLID- below Vih
        Device num = 1
 Timing cached reads:   1234 MB in  2.00 seconds = 616.73 MB/sec
BLKFLSBUF failed: Function not implemented
 Timing buffered disk reads:    8 MB in  3.02 seconds =   2.64 MB/sec
BLKFLSBUF failed: Function not implemented

Postup zprovoznění pod Linuxem

funguje bez potíží s K3B

Dokument vytvořil: penguin666, 24.7.2007 14:06 | Poslední úprava: penguin666, 27.2.2011 15:09 | Historie změn | Zobrazeno: 2093×