EasyDisk flashdrive 128MB

Ovladač:

v jádře

Technické parametry

Velmi maly flashdisk s USB 1.1 rozhranim. Je mozne zapnout ochranu proti zapisu. Take je snad mozne z tohoto disku bootovat, pokud vas BIOS umi bootovat s USB-ZIP jednotky (muj umi jen USB-FD, tak neovereno). Data jdou take zasifrovat a ochranit heslem, tuto moznost jsem ale s Linuxem nezkousel.

http://www.easydiskusa.com/overview.htm

Identifikace pod Linuxem

lsusb:
Bus 001 Device 003: ID 0c76:0005 JMTek
  Language IDs: none (invalid length string descriptor bf; len=0)
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            0 Interface
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0         8
  idVendor           0x0c76 JMTek
  idProduct          0x0005
  bcdDevice            1.00
  iManufacturer           0
  iProduct                0
  iSerial                 0
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           39
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0x80
    MaxPower              100mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           3
      bInterfaceClass         8 Mass Storage
      bInterfaceSubClass      6 SCSI
      bInterfaceProtocol     80 Bulk (Zip)
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               none
        wMaxPacketSize         64
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               none
        wMaxPacketSize         64
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x83  EP 3 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               none
        wMaxPacketSize          8
        bInterval             255
  Language IDs: none (invalid length string descriptor bf; len=0)

Postup zprovoznění pod Linuxem

modul: usb-storage

pripojeni: mount -t vfat /dev/sda1 /mnt/disk

Poznámka

Disk se dela ve velikostech 16, 32, 64, 128, 256, 512 a 1024MB

Testovano s MDK 8.2, kernel 2.4.18

Dokument vytvořil: Petr Slansky, 9.6.2002 21:46 | Zobrazeno: 793×