Logitech MouseMan Dual Optical USB/PS2

Ovladač:

v jádře

Technické parametry

USB myska (USB/PS2 konvertor), scroll kolecko, 2. opticke sensory

Identifikace pod Linuxem

dmesg :
hub.c: new USB device 00:11.2-2, assigned address 2
input0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical
Mouse] on usb2:2.0
/proc/bus/usb/devices:
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 93/900 us (10%), #Int= 1, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI-alt Root Hub
S: SerialNumber=e000
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=046d ProdID=c012 Rev=13.20
S: Manufacturer=Logitech
S: Product=USB-PS/2 Optical Mouse
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 98mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=hid
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=10ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI-alt Root Hub
S: SerialNumber=e400
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms

Postup zprovoznění pod Linuxem

(2.4.20 kernel)
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
CONFIG_USB_HIDDEV=y
make dep; make bzImage
me to delalo problem s APIC, tak jsem ho vypnul a jede v pohode. Ja mam zaply devfs!!
potom se tvari jako ps2 myska:
X:
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "ImPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Buttons" "6" #zatim k nicemu, chcu si namapovat 6. tlacitko, ale jeste nevim jak
EndSection

Poznámka

problemy se zprovoznenim byly zpusobeny zapnutym APIC (neco to tam neznalo). Tak jsem ho vypnul a jede v pohode. Zkouseno i s jadrem 2.5.53 myslim, tam jede i s APIC. Jinak si nemuzu stezovat

Dokument vytvořil: kapo, 25.3.2003 10:27 | Zobrazeno: 935×