AOpen i915Ga-HFS

Podpora:	kompletní
Ovladač:	v jádře

Technické parametry

• socket 479 400/533MHz FSB
• Pentium-M Banias/Dothan; Celeron-M
• 4 x DDR2 533MHz 256MB, 512MB nebo 1GB; 4GB max
• 1 x PCIe 16x
• 1 x PCIe 1x
• 3 x PCI
• 4 x SATA
• 1 x ATA/UDMA/100/66/33
• 1 x FDD
• 4 x USB
• 2 x IEEE1384
• 1 x IEEE1284 DB-25/LPT1
• 2 x RS232
• 1 x KBD/PS2

• 1 x D-Sub
• 1 x DVI
• 1 x S-Video
• 1 x D-connector
• 1 x YPbPr
• 4 x USB
• 1 x Audio
• 1 x LAN Marvell 88E8053 PCI-e 10/100/1000Mbit

Identifikace pod Linuxem

# lspci
00:00.0 Host bridge: Intel Corporation 82915G/P/GV/GL/PL/910GL Memory Controller Hub (rev 0e)
00:02.0 VGA compatible controller: Intel Corporation 82915G/GV/910GL Integrated Graphics Controller (rev 0e)
00:02.1 Display controller: Intel Corporation 82915G Integrated Graphics Controller (rev 0e)
00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 05)
00:1c.1 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 (rev 05)
00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 05)
00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 05)
00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 05)
00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 05)
00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 05)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d5)
00:1f.0 ISA bridge: Intel Corporation 82801FB/FR (ICH6/ICH6R) LPC Interface Bridge (rev 05)
00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 05)
00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 05)
02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8053 PCI-E Gigabit Ethernet Controller (rev 19)
03:00.0 PCI bridge: Digital Equipment Corporation DECchip 21152 (rev 03)
03:09.0 FireWire (IEEE 1394): Agere Systems FW323 (rev 61)

Poznámka

PCIe 1x je spatne umistena na desce resp. zarovnana dle PCI, takze do ni nelze vsunout kartu :(
Toto tvrzeni se ukazalo jako liche, alespon u desek, ktere jsem mel. Intel Pro/1000CT zda se byt ve stejne rovine jako PCI karta, takze s montazi by nemel byt problem. Mozna to platilo pro uplne prvni revize desek.

IEEE1394 jsem nezkousel

Marvell 88E8053 se ukazal jako problematicky a je pravdepodobne lepsi se mu vyhnout :(

Jan  6 08:43:08 seth kernel: sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
Jan  6 09:32:13 seth kernel: sky2 eth0: receiver hang detected
Jan  6 09:32:13 seth kernel: sky2 eth0: disabling interface
Jan  6 09:32:13 seth kernel: sky2 eth0: enabling interface
Jan  6 09:32:14 seth kernel: sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
Jan  6 10:47:05 seth kernel: sky2 eth0: receiver hang detected
Jan  6 10:47:05 seth kernel: sky2 eth0: disabling interface
Jan  6 10:47:05 seth kernel: sky2 eth0: enabling interface
Jan  6 10:47:06 seth kernel: sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both

Dle diskuzi na internetu - v nekterych pripadech pomohl update firmware, nekde ani "svecena voda". Udajne za to muze spatny design chipu a firmware. Tezko rict.

Obrázky

Dokument vytvořil: stybla, 4.1.2010 13:26 | Poslední úprava: stybla, 27.2.2011 15:08 | Historie změn | Zobrazeno: 802×