PROMISE FastTrak TX 4660/8660/8664/8668 Series

01:00.0 RAID bus controller: Promise Technology, Inc. Device 3781
Subsystem: Promise Technology, Inc. Device 3781
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- < TAbort- < MAbort- >SERR- < PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at bc00 [size=128]
Region 2: I/O ports at b800 [size=256]
Region 3: Memory at fbcff000 (32-bit, non-prefetchable) [size=4K]
Region 4: Memory at fbcc0000 (32-bit, non-prefetchable) [size=128K]
Region 5: Memory at fbcfc000 (32-bit, non-prefetchable) [size=8K]
Expansion ROM at fbc80000 [disabled] [size=256K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [70] Express (v1) Legacy Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency L0 <128ns, L1 <2us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Capabilities: [94] SATA HBA 
Capabilities: [100] Advanced Error Reporting 
Capabilities: [140] Virtual Channel 
Capabilities: [160] Device Serial Number 01-00-00-00-02-00-00-00
Capabilities: [170] Power Budgeting 

From b32bfc06aefab61acc872dec3222624e6cd867ed Mon Sep 17 00:00:00 2001
From: Romain Degez /romain.degez@gmail.com/
Date: Fri, 11 Jul 2014 18:08:13 +0200
Subject: [PATCH] ahci: add support for the Promise FastTrak TX8660 SATA HBA (ahci mode)

Add support of the Promise FastTrak TX8660 SATA HBA in ahci mode by
registering the board in the ahci_pci_tbl[].

Note: this HBA also provide a hardware RAID mode when activated in
BIOS but specific drivers from the manufacturer are required in this
case.

Signed-off-by: Romain Degez /romain.degez@gmail.com/
Tested-by: Romain Degez /romain.degez@gmail.com/
Signed-off-by: Tejun Heo /tj@kernel.org/
Cc: stable@vger.kernel.org
---
 drivers/ata/ahci.c |    1 +
 1 files changed, 1 insertions(+), 0 deletions(-)

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index dae5607..4cd52a4 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -456,6 +456,7 @@ static const struct pci_device_id ahci_pci_tbl[] = {
 
 	/* Promise */
 	{ PCI_VDEVICE(PROMISE, 0x3f20), board_ahci },	/* PDC42819 */
+	{ PCI_VDEVICE(PROMISE, 0x3781), board_ahci },   /* FastTrak TX8660 ahci-mode */
 
 	/* Asmedia */
 	{ PCI_VDEVICE(ASMEDIA, 0x0601), board_ahci },	/* ASM1060 */
-- 
1.7.1