Dotaz: LeadTek WinFast DTV Dongle Mini

[petr]

Dobrý den, zkoušel jsem instalovat na aktuální ubuntu 11.04 výše uvedenou kartu podle návodu na http://www.abclinuxu.cz/poradna/hardware/show/309261. Skončilo to však chybou. Neporadí někdo jak dál ?

/home/username/digivox/v4l-dvb/v4l/flexcop-i2c.c: In function 'flexcop_i2c_init':
/home/username/digivox/v4l-dvb/v4l/flexcop-i2c.c:253:39: error: 'I2C_CLASS_TV_DIGITAL' undeclared (first use in this function)
/home/username/digivox/v4l-dvb/v4l/flexcop-i2c.c:253:39: note: each undeclared identifier is reported only once for each function it appears in
make[3]: *** [/home/username/digivox/v4l-dvb/v4l/flexcop-i2c.o] Error 1
make[3]: *** Waiting for unfinished jobs....
/home/username/digivox/v4l-dvb/v4l/bttv-i2c.c: In function 'init_bttv_i2c_ir':
/home/username/digivox/v4l-dvb/v4l/bttv-i2c.c:437:3: error: too few arguments to function 'i2c_new_probed_device'
include/linux/i2c.h:296:1: note: declared here
make[3]: *** [/home/username/digivox/v4l-dvb/v4l/bttv-i2c.o] Error 1
make[2]: *** [_module_/home/username/digivox/v4l-dvb/v4l] Error 2
make[2]: Leaving directory `/usr/src/linux-headers-2.6.38-10-generic'
make[1]: *** [default] Error 2
make[1]: Leaving directory `/home/username/digivox/v4l-dvb/v4l'
make: *** [all] Error 2

---
lsusb
---

Bus 002 Device 003: ID 0413:6a03 Leadtek Research, Inc. 
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0        64
  idVendor           0x0413 Leadtek Research, Inc.
  idProduct          0x6a03 
  bcdDevice            1.00
  iManufacturer           1 realtek
  iProduct                2 usbtv
  iSerial                 0 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          4 USB2.0-Bulk&Iso
    bmAttributes         0x80
      (Bus Powered)
    MaxPower              500mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    255 Vendor Specific Subclass
      bInterfaceProtocol    255 Vendor Specific Protocol
      iInterface              5 Bulk-In, Interface
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
Device Qualifier (for other device speed):
  bLength                10
  bDescriptorType         6
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0        64
  bNumConfigurations      2
Device Status:     0x0000
  (Bus Powered)

Odpovědi

[jehovista]

Taky jsem se nachytal. Na novych jadrech to nejde zkompilovat. I kdyz opravis deset chyb, tak je tam sto dalsich. Tu kartu radsi zahod

[petertomasy]

pozri sem

[jehovista]

Jsi si jisty? Ty navody, ktere jsem videl ja zavadely uplne jinak pojmenovany na konci uplne jiny modul

[RedFlash]

Nic nezahazuj. Mel jsem stejny problem s chybami, ale nakonec se mi to podarilo rozjet podle tohoto navodu: http://www.hardwareluxx.de/community/f211/dvb-t-terratec-cinergy-t-stick-black-816212.html. Mam kernel 3.0.0.17