Dotaz: Žádný výstup s nvidia drivery ve Fedoře

[nls]

Ahoj. Z rpmfusion jsem nainstaloval nvidia drivery pro můj notebook. Je to Nvidia quadro M1200 s optimus technologií. Podle logů nvidia driver běží, nouveau je bloklý, nicméně nemám žádný obraz. Respektive X server běží, ale obrazovka je černá. Podle logů to vypadá na problém s optimus technologií, která by ale měla fungovat bez problému. V xorg logu:

...
[     8.490] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[     8.490] (==) NVIDIA(0):     will be used as the requested mode.
[     8.490] (==) NVIDIA(0): 
[     8.490] (--) NVIDIA(0): No enabled display devices found; starting anyway because
[     8.490] (--) NVIDIA(0):     AllowEmptyInitialConfiguration is enabled
[     8.490] (II) NVIDIA(0): Validated MetaModes:
[     8.490] (II) NVIDIA(0):     "NULL"
...
[     8.616] (II) NVIDIA: Using 12288.00 MB of virtual memory for indirect memory
[     8.617] (II) NVIDIA:     access.
[     8.620] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[     8.620] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[     8.620] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[     8.620] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[     8.620] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[     8.620] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[     8.620] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[     8.620] (II) NVIDIA(0):     Config Options in the README.
[     8.645] (II) NVIDIA(0): Setting mode "NULL"
[     8.653] (==) NVIDIA(0): Disabling shared memory pixmaps
[     8.653] (==) NVIDIA(0): Backing store enabled
[     8.653] (==) NVIDIA(0): Silken mouse enabled
[     8.653] (==) NVIDIA(0): DPMS enabled
[     8.653] (WW) NVIDIA(0): Option "PrimaryGPU" is not used
[     8.653] (II) Loading sub module "dri2"
[     8.653] (II) LoadModule: "dri2"
[     8.653] (II) Module "dri2" already built-in
[     8.653] (II) NVIDIA(0): [DRI2] Setup complete
[     8.653] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
...

Nevíte, jak to vyřešit?

Odpovědi

[jejej]

Podle toho logu to spíš vypadá jako bys tam neměl připojenou žádnou obrazovku. Nebo ji ten driver nenajde.

No enabled display devices found

Zkus sem toho dát víc. Grepni z toho logu všecko kde je "NVIDIA" Měla by tam být ta část, kde se ty monitory snaží detekovat. Třeba z toho pude poznat proč se mu to nedaří.

[MadCatY]

Optimus s proprietárními ovladači nikdy pořádně nefungoval a fungovat nebude. Žádné výstupy Xka nevidí, protože ta nVidia k žádnému fyzickému výstupu připojená není. Nějaké workaroundy jsou navrženy třeba zde: https://wiki.archlinux.org/index.php/NVIDIA_Optimus

[nls]

Celý NVIDIA výstup zde:

[     7.680] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib64/nvidia/xorg,/usr/lib64/xorg/modules"
[     7.681] (**) OutputClass "nvidia" setting /dev/dri/card1 as PrimaryGPU
[     7.682] (II) Loading /usr/lib64/nvidia/xorg/libglx.so
[     7.695] (II) Module glx: vendor="NVIDIA Corporation"
[     7.695] (II) NVIDIA GLX Module  375.66  Mon May  1 14:28:39 PDT 2017
[     7.695] (II) Applying OutputClass "nvidia" to /dev/dri/card1
[     7.695] 	loading driver: nvidia
[     7.986] (==) Matched nvidia as autoconfigured driver 0
[     7.986] (II) LoadModule: "nvidia"
[     7.987] (II) Loading /usr/lib64/xorg/modules/drivers/nvidia_drv.so
[     7.989] (II) Module nvidia: vendor="NVIDIA Corporation"
[     7.992] (II) NVIDIA dlloader X Driver  375.66  Mon May  1 14:03:26 PDT 2017
[     7.992] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[     8.029] (II) NVIDIA(0): Creating default Display subsection in Screen section
[     8.029] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[     8.029] (==) NVIDIA(0): RGB weight 888
[     8.029] (==) NVIDIA(0): Default visual is TrueColor
[     8.029] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[     8.029] (II) Applying OutputClass "nvidia" options to /dev/dri/card1
[     8.029] (**) NVIDIA(0): Option "SLI" "Auto"
[     8.029] (**) NVIDIA(0): Option "BaseMosaic" "on"
[     8.029] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[     8.029] (**) NVIDIA(0): NVIDIA SLI auto-select rendering option.
[     8.029] (**) NVIDIA(0): Enabling 2D acceleration
[     8.030] (WW) NVIDIA(0): Failed to initialize Base Mosaic!  Reason: Only one GPU
[     8.030] (WW) NVIDIA(0):     detected.  Only one GPU will be used for this X screen.
[     8.489] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0
[     8.489] (--) NVIDIA(0):     DFP-0
[     8.489] (--) NVIDIA(0):     DFP-1
[     8.489] (--) NVIDIA(0):     DFP-2
[     8.489] (--) NVIDIA(0):     DFP-3
[     8.489] (--) NVIDIA(0):     DFP-4
[     8.489] (--) NVIDIA(0):     DFP-5
[     8.490] (II) NVIDIA(0): NVIDIA GPU Quadro M1200 (GM107GL-A) at PCI:1:0:0 (GPU-0)
[     8.490] (--) NVIDIA(0): Memory: 4194304 kBytes
[     8.490] (--) NVIDIA(0): VideoBIOS: 82.07.af.00.2d
[     8.490] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[     8.490] (--) NVIDIA(GPU-0): DFP-0: disconnected
[     8.490] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[     8.490] (--) NVIDIA(GPU-0): DFP-0: 165.0 MHz maximum pixel clock
[     8.490] (--) NVIDIA(GPU-0): 
[     8.490] (--) NVIDIA(GPU-0): DFP-1: disconnected
[     8.490] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[     8.490] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[     8.490] (--) NVIDIA(GPU-0): 
[     8.490] (--) NVIDIA(GPU-0): DFP-2: disconnected
[     8.490] (--) NVIDIA(GPU-0): DFP-2: Internal TMDS
[     8.490] (--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock
[     8.490] (--) NVIDIA(GPU-0): 
[     8.490] (--) NVIDIA(GPU-0): DFP-3: disconnected
[     8.490] (--) NVIDIA(GPU-0): DFP-3: Internal DisplayPort
[     8.490] (--) NVIDIA(GPU-0): DFP-3: 960.0 MHz maximum pixel clock
[     8.490] (--) NVIDIA(GPU-0): 
[     8.490] (--) NVIDIA(GPU-0): DFP-4: disconnected
[     8.490] (--) NVIDIA(GPU-0): DFP-4: Internal DisplayPort
[     8.490] (--) NVIDIA(GPU-0): DFP-4: 960.0 MHz maximum pixel clock
[     8.490] (--) NVIDIA(GPU-0): 
[     8.490] (--) NVIDIA(GPU-0): DFP-5: disconnected
[     8.490] (--) NVIDIA(GPU-0): DFP-5: Internal DisplayPort
[     8.490] (--) NVIDIA(GPU-0): DFP-5: 960.0 MHz maximum pixel clock
[     8.490] (--) NVIDIA(GPU-0): 
[     8.490] (==) NVIDIA(0): 
[     8.490] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[     8.490] (==) NVIDIA(0):     will be used as the requested mode.
[     8.490] (==) NVIDIA(0): 
[     8.490] (--) NVIDIA(0): No enabled display devices found; starting anyway because
[     8.490] (--) NVIDIA(0):     AllowEmptyInitialConfiguration is enabled
[     8.490] (II) NVIDIA(0): Validated MetaModes:
[     8.490] (II) NVIDIA(0):     "NULL"
[     8.490] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[     8.490] (WW) NVIDIA(0): Unable to get display device for DPI computation.
[     8.490] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[     8.616] (II) NVIDIA: Using 12288.00 MB of virtual memory for indirect memory
[     8.617] (II) NVIDIA:     access.
[     8.620] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[     8.620] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[     8.620] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[     8.620] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[     8.620] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[     8.620] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[     8.620] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[     8.620] (II) NVIDIA(0):     Config Options in the README.
[     8.645] (II) NVIDIA(0): Setting mode "NULL"
[     8.653] (==) NVIDIA(0): Disabling shared memory pixmaps
[     8.653] (==) NVIDIA(0): Backing store enabled
[     8.653] (==) NVIDIA(0): Silken mouse enabled
[     8.653] (==) NVIDIA(0): DPMS enabled
[     8.653] (WW) NVIDIA(0): Option "PrimaryGPU" is not used
[     8.653] (II) NVIDIA(0): [DRI2] Setup complete
[     8.653] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia

Zkoušel jsem uzavřené drivery pod Ubuntu a tam to funguje dobře, tam se instaluje balík nvidia-prime a jede to. Tedy vždy se napevno musí nastavit NVIDIA nebo Intel výstup, ale pak to funguje. Ve Fedoře jsem to dělal podle návodu a fungovat by to mělo. Proč nemám obraz na displayi nevím, ale nvidia driver evidentně běží.