abclinuxu.cz AbcLinuxu.cz itbiz.cz ITBiz.cz HDmag.cz HDmag.cz abcprace.cz AbcPráce.cz
AbcLinuxu hledá autory!
Inzerujte na AbcPráce.cz od 950 Kč
Rozšířené hledání
Přihlášení | Registrace
×
napište » Zprávičky
inzerujte » Pracovní nabídky
    BreezyBox
    dnes 16:11 | Zajímavý software

    BreezyBox je open-source shell a virtuální terminál pro populární jednočip ESP32. Nabízí základní unixové příkazy, sledování aktuálního pracovního adresáře (CWD), jednoduchý instalátor a spouštěč aplikací v podobě ELF binárních souborů, zabudovaný HTTP server nebo třeba ovládání WiFi - ukázka použití coby 'malého osobního počítače'. Ačkoliv je BreezyBox inspirovaný BusyBoxem, oproti němu má tento projekt několik externích závislostí, zejména na ESP-IDF SDK. BreezyBox je dostupný pod licencí MIT.

    NUKE GAZA! 🎆 | Komentářů: 0
    Cross-assembler napsaný čistě v Bashi
    dnes 16:00 | Humor

    Byl představen cross-assembler xa.sh, napsaný čistě v Bourne shell skriptu. Tento nástroj umožňuje zpracovávat assemblerový kód pro Intel 8080, přičemž je možné snadno přidat podporu i pro další architektury, například 6502 a 6809. Skript využívá pouze různé běžné unixové příkazy jako jsou awk, sed nebo printf. Skript si lze stáhnout z GitHubového repozitáře projektu.

    NUKE GAZA! 🎆 | Komentářů: 1
    Claude Opus 4.6 vytvořil kompilátor jazyka C
    včera 17:22 | IT novinky

    Byla představena nová verze modelu Claude Opus 4.6 od společnosti Anthropic. Jako demonstraci možností Anthropic využil 16 agentů Claude Opus 4.6 k vytvoření kompilátoru jazyka C, napsaného v programovacím jazyce Rust. Claude pracoval téměř autonomně, projekt trval zhruba dva týdny a náklady činily přibližně 20 000 dolarů. Výsledkem je fungující kompilátor o 100 000 řádcích kódu, jehož zdrojový kód je volně dostupný na GitHubu pod licencí Creative Commons.

    NUKE GAZA! 🎆 | Komentářů: 16
    Sitcom The IT Crowd (Ajťáci) oslavil 20. narozeniny
    včera 16:44 | Komunita

    Kultovní britský seriál The IT Crowd (Ajťáci) oslavil dvacáté výročí svého prvního vysílání. Sitcom o dvou sociálně nemotorných pracovnících a jejich nadřízené zaujal diváky svým humorem a ikonickými hláškami. Seriál, který debutoval v roce 2006, si i po dvou dekádách udržuje silnou fanouškovskou základnu a pravidelně se objevuje v seznamech nejlepších komedií své doby. Nedávné zatčení autora seriálu Grahama Linehana za hatecrime však vyvolává otázku, jestli by tento sitcom v současné Velké Británii vůbec vznikl.

    NUKE GAZA! 🎆 | Komentářů: 5
    IDE založená na IntelliJ budou ve výchozím nastavení používat Wayland
    včera 13:33 | IT novinky

    Společnost JetBrains oznámila, že počínaje verzí 2026.1 budou IDE založená na IntelliJ ve výchozím nastavení používat Wayland.

    Ladislav Hagara | Komentářů: 4
    Podle SpaceX má milion satelitů pomoci zajistit provoz umělé inteligence
    včera 11:22 | IT novinky

    Společnost SpaceX amerického miliardáře Elona Muska podala žádost o vypuštění jednoho milionu satelitů na oběžnou dráhu kolem Země, odkud by pomohly zajistit provoz umělé inteligence (AI) a zároveň šetřily pozemské zdroje. Zatím se ale neví, kdy by se tak mělo stát. V žádosti Federální komisi pro spoje (FCC) se píše, že orbitální datová centra jsou nejúspornějším a energeticky nejúčinnějším způsobem, jak uspokojit rostoucí poptávku po

    … více »
    Ladislav Hagara | Komentářů: 23
    Git 2.53.0
    včera 11:11 | Nová verze

    Byla vydána nová verze 2.53.0 distribuovaného systému správy verzí Git. Přispělo 70 vývojářů, z toho 21 nových. Přehled novinek v poznámkách k vydání.

    Ladislav Hagara | Komentářů: 0
    Pozvánka na 216. sraz spolku OpenAlt – MeshCore
    včera 04:22 | Komunita

    Spolek OpenAlt zve příznivce otevřených řešení a přístupu na 216. sraz, který proběhne v pátek 20. února od 18:00 v Red Hat Labu (místnost Q304) na Fakultě informačních technologií VUT v Brně na ulici Božetěchova 1/2. Tématem srazu bude komunitní komunikační síť MeshCore. Jindřich Skácel představí, co je to MeshCore, předvede nejrůznější klientské zařízení a ukáže, jak v praxi vypadá nasazení vlastního repeateru.

    Ladislav Hagara | Komentářů: 0
    Ardour 9.0
    včera 03:33 | Nová verze

    Byla vydána nová major verze 9.0 multiplatformní digitální pracovní stanice pro práci s audiem (DAW) Ardour. Přehled novinek, vylepšení a oprav v poznámkách k vydání.

    Ladislav Hagara | Komentářů: 0
    Bitcoin pod 70 000 dolarů
    5.2. 13:55 | IT novinky

    Hodnota Bitcoinu, decentralizované kryptoměny klesla pod 70 000 dolarů (1,44 milionu korun).

    Ladislav Hagara | Komentářů: 14
    Centrum | Napsat | Starší
    navrhněte » Anketa
    Které desktopové prostředí na Linuxu používáte?
     (19%)
     (6%)
     (0%)
     (10%)
     (25%)
     (3%)
     (5%)
     (2%)
     (12%)
     (29%)
    Celkem 793 hlasů
     Komentářů: 25, poslední 3.2. 19:50
    Rozcestník
    AbcLinuxu
    HDmag.cz
    AbcLinuxu:/ Poradna / Linuxová poradna / ipmi firewall
    Štítky: C, firmware, IPMI, modul, programování

    Dotaz: ipmi firewall

    14.10.2010 17:11 firewall
    ipmi firewall
    Přečteno: 610×
    Ahojte,
    mam na serveri IPMI modul a pri vypnuti FW mi to dava nasledovnu hlasku: 
    ~# ipmitool firewall disable channel 1 LUN 1
Get Command Support (LUN=0, NetFn=46, op=0) command failed: Request data length invalid
Get Configurable Command (LUN=0, NetFn=46, op=0) command failed: Request data length invalid
Get Command Support (LUN=2, NetFn=0, op=0) command failed: Invalid data field in request
Get Configurable Command (LUN=2, NetFn=0, op=0) command failed: Invalid data field in request
Get Command Enables (LUN=2, NetFn=0, op=0) command failed: Invalid data field in request
Get Command Support (LUN=2, NetFn=2, op=0) command failed: Invalid data field in request
Get Configurable Command (LUN=2, NetFn=2, op=0) command failed: Invalid data field in request
Get Command Enables (LUN=2, NetFn=2, op=0) command failed: Invalid data field in request
Get Command Support (LUN=2, NetFn=4, op=0) command failed: Invalid data field in request
Get Configurable Command (LUN=2, NetFn=4, op=0) command failed: Invalid data field in request
Get Command Enables (LUN=2, NetFn=4, op=0) command failed: Invalid data field in request
Get Command Support (LUN=2, NetFn=6, op=0) command failed: Invalid data field in request
Get Configurable Command (LUN=2, NetFn=6, op=0) command failed: Invalid data field in request
Get Command Enables (LUN=2, NetFn=6, op=0) command failed: Invalid data field in request
Get Command Support (LUN=2, NetFn=8, op=0) command failed: Invalid data field in request
Get Configurable Command (LUN=2, NetFn=8, op=0) command failed: Invalid data field in request
Get Command Enables (LUN=2, NetFn=8, op=0) command failed: Invalid data field in request
Get Command Support (LUN=2, NetFn=10, op=0) command failed: Invalid data field in request
Get Configurable Command (LUN=2, NetFn=10, op=0) command failed: Invalid data field in request
Get Command Enables (LUN=2, NetFn=10, op=0) command failed: Invalid data field in request
Get Command Support (LUN=2, NetFn=12, op=0) command failed: Invalid data field in request
Get Configurable Command (LUN=2, NetFn=12, op=0) command failed: Invalid data field in request
Get Command Enables (LUN=2, NetFn=12, op=0) command failed: Invalid data field in request
Get Command Support (LUN=2, NetFn=14, op=0) command failed: Invalid data field in request
Get Configurable Command (LUN=2, NetFn=14, op=0) command failed: Invalid data field in request
Get Command Enables (LUN=2, NetFn=14, op=0) command failed: Invalid data field in request
Get Command Support (LUN=2, NetFn=16, op=0) command failed: Invalid data field in request
Get Configurable Command (LUN=2, NetFn=16, op=0) command failed: Invalid data field in request
Get Command Enables (LUN=2, NetFn=16, op=0) command failed: Invalid data field in request
Get Command Support (LUN=2, NetFn=18, op=0) command failed: Invalid data field in request
Get Configurable Command (LUN=2, NetFn=18, op=0) command failed: Invalid data field in request
Get Command Enables (LUN=2, NetFn=18, op=0) command failed: Invalid data field in request
Get Command Support (LUN=2, NetFn=20, op=0) command failed: Invalid data field in request
Get Configurable Command (LUN=2, NetFn=20, op=0) command failed: Invalid data field in request
Get Command Enables (LUN=2, NetFn=20, op=0) command failed: Invalid data field in request
Get Command Support (LUN=2, NetFn=22, op=0) command failed: Invalid data field in request
Get Configurable Command (LUN=2, NetFn=22, op=0) command failed: Invalid data field in request
Get Command Enables (LUN=2, NetFn=22, op=0) command failed: Invalid data field in request
Get Command Support (LUN=2, NetFn=24, op=0) command failed: Invalid data field in request
Get Configurable Command (LUN=2, NetFn=24, op=0) command failed: Invalid data field in request
Get Command Enables (LUN=2, NetFn=24, op=0) command failed: Invalid data field in request
Get Command Support (LUN=2, NetFn=26, op=0) command failed: Invalid data field in request
Get Configurable Command (LUN=2, NetFn=26, op=0) command failed: Invalid data field in request
Get Command Enables (LUN=2, NetFn=26, op=0) command failed: Invalid data field in request
Get Command Support (LUN=2, NetFn=28, op=0) command failed: Invalid data field in request
Get Configurable Command (LUN=2, NetFn=28, op=0) command failed: Invalid data field in request
Get Command Enables (LUN=2, NetFn=28, op=0) command failed: Invalid data field in request
Get Command Support (LUN=2, NetFn=30, op=0) command failed: Invalid data field in request
Get Configurable Command (LUN=2, NetFn=30, op=0) command failed: Invalid data field in request
Get Command Enables (LUN=2, NetFn=30, op=0) command failed: Invalid data field in request
Get Command Support (LUN=2, NetFn=32, op=0) command failed: Invalid data field in request
Get Configurable Command (LUN=2, NetFn=32, op=0) command failed: Invalid data field in request
Get Command Enables (LUN=2, NetFn=32, op=0) command failed: Invalid data field in request
Get Command Support (LUN=2, NetFn=34, op=0) command failed: Invalid data field in request
Get Configurable Command (LUN=2, NetFn=34, op=0) command failed: Invalid data field in request
Get Command Enables (LUN=2, NetFn=34, op=0) command failed: Invalid data field in request
Get Command Support (LUN=2, NetFn=36, op=0) command failed: Invalid data field in request
Get Configurable Command (LUN=2, NetFn=36, op=0) command failed: Invalid data field in request
Get Command Enables (LUN=2, NetFn=36, op=0) command failed: Invalid data field in request
Get Command Support (LUN=2, NetFn=38, op=0) command failed: Invalid data field in request
Get Configurable Command (LUN=2, NetFn=38, op=0) command failed: Invalid data field in request
Get Command Enables (LUN=2, NetFn=38, op=0) command failed: Invalid data field in request
Get Command Support (LUN=2, NetFn=40, op=0) command failed: Invalid data field in request
Get Configurable Command (LUN=2, NetFn=40, op=0) command failed: Invalid data field in request
Get Command Enables (LUN=2, NetFn=40, op=0) command failed: Invalid data field in request
Get Command Support (LUN=2, NetFn=42, op=0) command failed: Invalid data field in request
Get Configurable Command (LUN=2, NetFn=42, op=0) command failed: Invalid data field in request
Get Command Enables (LUN=2, NetFn=42, op=0) command failed: Invalid data field in request
Get Command Support (LUN=2, NetFn=44, op=0) command failed: Invalid data field in request
Get Configurable Command (LUN=2, NetFn=44, op=0) command failed: Invalid data field in request
Get Command Enables (LUN=2, NetFn=44, op=0) command failed: Invalid data field in request
Get Command Support (LUN=2, NetFn=46, op=0) command failed: Request data length invalid
Get Configurable Command (LUN=2, NetFn=46, op=0) command failed: Request data length invalid
Get Command Enables (LUN=2, NetFn=46, op=0) command failed: Invalid data field in request
Get Command Support (LUN=2, NetFn=48, op=0) command failed: Invalid data field in request
Get Configurable Command (LUN=2, NetFn=48, op=0) command failed: Invalid data field in request
Get Command Enables (LUN=2, NetFn=48, op=0) command failed: Invalid data field in request
Get Command Support (LUN=2, NetFn=50, op=0) command failed: Invalid data field in request
Get Configurable Command (LUN=2, NetFn=50, op=0) command failed: Invalid data field in request
Get Command Enables (LUN=2, NetFn=50, op=0) command failed: Invalid data field in request
Get Command Support (LUN=2, NetFn=52, op=0) command failed: Invalid data field in request
Get Configurable Command (LUN=2, NetFn=52, op=0) command failed: Invalid data field in request
Get Command Enables (LUN=2, NetFn=52, op=0) command failed: Invalid data field in request
Get Command Support (LUN=2, NetFn=54, op=0) command failed: Invalid data field in request
Get Configurable Command (LUN=2, NetFn=54, op=0) command failed: Invalid data field in request
Get Command Enables (LUN=2, NetFn=54, op=0) command failed: Invalid data field in request
Get Command Support (LUN=2, NetFn=56, op=0) command failed: Invalid data field in request
Get Configurable Command (LUN=2, NetFn=56, op=0) command failed: Invalid data field in request
Get Command Enables (LUN=2, NetFn=56, op=0) command failed: Invalid data field in request
Get Command Support (LUN=2, NetFn=58, op=0) command failed: Invalid data field in request
Get Configurable Command (LUN=2, NetFn=58, op=0) command failed: Invalid data field in request
Get Command Enables (LUN=2, NetFn=58, op=0) command failed: Invalid data field in request
Get Command Support (LUN=2, NetFn=60, op=0) command failed: Invalid data field in request
Get Configurable Command (LUN=2, NetFn=60, op=0) command failed: Invalid data field in request
Get Command Enables (LUN=2, NetFn=60, op=0) command failed: Invalid data field in request
Get Command Support (LUN=2, NetFn=62, op=0) command failed: Invalid data field in request
Get Configurable Command (LUN=2, NetFn=62, op=0) command failed: Invalid data field in request
Get Command Enables (LUN=2, NetFn=62, op=0) command failed: Invalid data field in request
paladin:~# ipmitool firewall
Firmware Firewall Commands:
        info [channel H] [lun L]
        info [channel H] [lun L [netfn N [cmd C [subfn S]]]]
        enable [channel H] [lun L [netfn N [cmd C [subfn S]]]]
        disable [channel H] [lun L [netfn N [cmd C [subfn S]]]] [force])
        reset [channel H]
                where H is a Channel, L is a LUN, N is a NetFn,
                C is a Command and S is a Sub-Function
paladin:~# ipmitool firewall disable channel 1
Get Command Support (LUN=0, NetFn=46, op=0) command failed: Request data length invalid
Get Configurable Command (LUN=0, NetFn=46, op=0) command failed: Request data length invalid
Get Command Support (LUN=2, NetFn=0, op=0) command failed: Invalid data field in request
Get Configurable Command (LUN=2, NetFn=0, op=0) command failed: Invalid data field in request
Get Command Enables (LUN=2, NetFn=0, op=0) command failed: Invalid data field in request
Get Command Support (LUN=2, NetFn=2, op=0) command failed: Invalid data field in request
Get Configurable Command (LUN=2, NetFn=2, op=0) command failed: Invalid data field in request
Get Command Enables (LUN=2, NetFn=2, op=0) command failed: Invalid data field in request
Get Command Support (LUN=2, NetFn=4, op=0) command failed: Invalid data field in request
Get Configurable Command (LUN=2, NetFn=4, op=0) command failed: Invalid data field in request
Get Command Enables (LUN=2, NetFn=4, op=0) command failed: Invalid data field in request
Get Command Support (LUN=2, NetFn=6, op=0) command failed: Invalid data field in request
Get Configurable Command (LUN=2, NetFn=6, op=0) command failed: Invalid data field in request
Get Command Enables (LUN=2, NetFn=6, op=0) command failed: Invalid data field in request
Get Command Support (LUN=2, NetFn=8, op=0) command failed: Invalid data field in request
Get Configurable Command (LUN=2, NetFn=8, op=0) command failed: Invalid data field in request
Get Command Enables (LUN=2, NetFn=8, op=0) command failed: Invalid data field in request
Get Command Support (LUN=2, NetFn=10, op=0) command failed: Invalid data field in request
Get Configurable Command (LUN=2, NetFn=10, op=0) command failed: Invalid data field in request
Get Command Enables (LUN=2, NetFn=10, op=0) command failed: Invalid data field in request
Get Command Support (LUN=2, NetFn=12, op=0) command failed: Invalid data field in request
Get Configurable Command (LUN=2, NetFn=12, op=0) command failed: Invalid data field in request
Get Command Enables (LUN=2, NetFn=12, op=0) command failed: Invalid data field in request
Get Command Support (LUN=2, NetFn=14, op=0) command failed: Invalid data field in request
Get Configurable Command (LUN=2, NetFn=14, op=0) command failed: Invalid data field in request
Get Command Enables (LUN=2, NetFn=14, op=0) command failed: Invalid data field in request
Get Command Support (LUN=2, NetFn=16, op=0) command failed: Invalid data field in request
Get Configurable Command (LUN=2, NetFn=16, op=0) command failed: Invalid data field in request
Get Command Enables (LUN=2, NetFn=16, op=0) command failed: Invalid data field in request
Get Command Support (LUN=2, NetFn=18, op=0) command failed: Invalid data field in request
Get Configurable Command (LUN=2, NetFn=18, op=0) command failed: Invalid data field in request
Get Command Enables (LUN=2, NetFn=18, op=0) command failed: Invalid data field in request
Get Command Support (LUN=2, NetFn=20, op=0) command failed: Invalid data field in request
Get Configurable Command (LUN=2, NetFn=20, op=0) command failed: Invalid data field in request
Get Command Enables (LUN=2, NetFn=20, op=0) command failed: Invalid data field in request
Get Command Support (LUN=2, NetFn=22, op=0) command failed: Invalid data field in request
Get Configurable Command (LUN=2, NetFn=22, op=0) command failed: Invalid data field in request
Get Command Enables (LUN=2, NetFn=22, op=0) command failed: Invalid data field in request
Get Command Support (LUN=2, NetFn=24, op=0) command failed: Invalid data field in request
Get Configurable Command (LUN=2, NetFn=24, op=0) command failed: Invalid data field in request
Get Command Enables (LUN=2, NetFn=24, op=0) command failed: Invalid data field in request
Get Command Support (LUN=2, NetFn=26, op=0) command failed: Invalid data field in request
Get Configurable Command (LUN=2, NetFn=26, op=0) command failed: Invalid data field in request
Get Command Enables (LUN=2, NetFn=26, op=0) command failed: Invalid data field in request
Get Command Support (LUN=2, NetFn=28, op=0) command failed: Invalid data field in request
Get Configurable Command (LUN=2, NetFn=28, op=0) command failed: Invalid data field in request
Get Command Enables (LUN=2, NetFn=28, op=0) command failed: Invalid data field in request
Get Command Support (LUN=2, NetFn=30, op=0) command failed: Invalid data field in request
Get Configurable Command (LUN=2, NetFn=30, op=0) command failed: Invalid data field in request
Get Command Enables (LUN=2, NetFn=30, op=0) command failed: Invalid data field in request
Get Command Support (LUN=2, NetFn=32, op=0) command failed: Invalid data field in request
Get Configurable Command (LUN=2, NetFn=32, op=0) command failed: Invalid data field in request
Get Command Enables (LUN=2, NetFn=32, op=0) command failed: Invalid data field in request
Get Command Support (LUN=2, NetFn=34, op=0) command failed: Invalid data field in request
Get Configurable Command (LUN=2, NetFn=34, op=0) command failed: Invalid data field in request
Get Command Enables (LUN=2, NetFn=34, op=0) command failed: Invalid data field in request
Get Command Support (LUN=2, NetFn=36, op=0) command failed: Invalid data field in request
Get Configurable Command (LUN=2, NetFn=36, op=0) command failed: Invalid data field in request
Get Command Enables (LUN=2, NetFn=36, op=0) command failed: Invalid data field in request
Get Command Support (LUN=2, NetFn=38, op=0) command failed: Invalid data field in request
Get Configurable Command (LUN=2, NetFn=38, op=0) command failed: Invalid data field in request
Get Command Enables (LUN=2, NetFn=38, op=0) command failed: Invalid data field in request
Get Command Support (LUN=2, NetFn=40, op=0) command failed: Invalid data field in request
Get Configurable Command (LUN=2, NetFn=40, op=0) command failed: Invalid data field in request
Get Command Enables (LUN=2, NetFn=40, op=0) command failed: Invalid data field in request
Get Command Support (LUN=2, NetFn=42, op=0) command failed: Invalid data field in request
Get Configurable Command (LUN=2, NetFn=42, op=0) command failed: Invalid data field in request
Get Command Enables (LUN=2, NetFn=42, op=0) command failed: Invalid data field in request
Get Command Support (LUN=2, NetFn=44, op=0) command failed: Invalid data field in request
Get Configurable Command (LUN=2, NetFn=44, op=0) command failed: Invalid data field in request
Get Command Enables (LUN=2, NetFn=44, op=0) command failed: Invalid data field in request
Get Command Support (LUN=2, NetFn=46, op=0) command failed: Request data length invalid
Get Configurable Command (LUN=2, NetFn=46, op=0) command failed: Request data length invalid
Get Command Enables (LUN=2, NetFn=46, op=0) command failed: Invalid data field in request
Get Command Support (LUN=2, NetFn=48, op=0) command failed: Invalid data field in request
Get Configurable Command (LUN=2, NetFn=48, op=0) command failed: Invalid data field in request
Get Command Enables (LUN=2, NetFn=48, op=0) command failed: Invalid data field in request
Get Command Support (LUN=2, NetFn=50, op=0) command failed: Invalid data field in request
Get Configurable Command (LUN=2, NetFn=50, op=0) command failed: Invalid data field in request
Get Command Enables (LUN=2, NetFn=50, op=0) command failed: Invalid data field in request
Get Command Support (LUN=2, NetFn=52, op=0) command failed: Invalid data field in request
Get Configurable Command (LUN=2, NetFn=52, op=0) command failed: Invalid data field in request
Get Command Enables (LUN=2, NetFn=52, op=0) command failed: Invalid data field in request
Get Command Support (LUN=2, NetFn=54, op=0) command failed: Invalid data field in request
Get Configurable Command (LUN=2, NetFn=54, op=0) command failed: Invalid data field in request
Get Command Enables (LUN=2, NetFn=54, op=0) command failed: Invalid data field in request
Get Command Support (LUN=2, NetFn=56, op=0) command failed: Invalid data field in request
Get Configurable Command (LUN=2, NetFn=56, op=0) command failed: Invalid data field in request
Get Command Enables (LUN=2, NetFn=56, op=0) command failed: Invalid data field in request
Get Command Support (LUN=2, NetFn=58, op=0) command failed: Invalid data field in request
Get Configurable Command (LUN=2, NetFn=58, op=0) command failed: Invalid data field in request
Get Command Enables (LUN=2, NetFn=58, op=0) command failed: Invalid data field in request
Get Command Support (LUN=2, NetFn=60, op=0) command failed: Invalid data field in request
Get Configurable Command (LUN=2, NetFn=60, op=0) command failed: Invalid data field in request
Get Command Enables (LUN=2, NetFn=60, op=0) command failed: Invalid data field in request
Get Command Support (LUN=2, NetFn=62, op=0) command failed: Invalid data field in request
Get Configurable Command (LUN=2, NetFn=62, op=0) command failed: Invalid data field in request
Get Command Enables (LUN=2, NetFn=62, op=0) command failed: Invalid data field in request
    a FW zostane aj nadalej zapnuty. Potreboval by som pomoct s jeho vypnutim. Dakujem.
    Nástroje: Začni sledovat (1) ?Zašle upozornění na váš email při vložení nového komentáře.

    Na otázku zatím nikdo bohužel neodpověděl.

    Založit nové vlákno • Nahoru

    Tiskni Sdílej: Linkuj Jaggni to Vybrali.sme.sk Google Del.icio.us Facebook

    Píšeme jinde
    ISSN 1214-1267   www.czech-server.cz
    Redakce | Inzerce | Podmínky použití | Osobní údaje
    © 1999-2015 Nitemedia s. r. o. Všechna práva vyhrazena.