Dotaz: Mrtvy radic nebo disky nebo softwarovy problem?

[Michal]

Zdravim, dnes po probuzeni me uvitalo tohle:

May 29 07:22:46 ZFS2 kernel: [2302957.838488] ata10.00: exception Emask 0x0 SAct 0x8 SErr 0x0 action 0x0
May 29 07:22:46 ZFS2 kernel: [2302957.838496] ata10.00: irq_stat 0x40000008
May 29 07:22:46 ZFS2 kernel: [2302957.838500] ata10.00: failed command: WRITE FPDMA QUEUED
May 29 07:22:46 ZFS2 kernel: [2302957.838509] ata10.00: cmd 61/e0:18:70:1c:e3/00:00:ff:00:00/40 tag 3 ncq dma 114688 out
May 29 07:22:46 ZFS2 kernel: [2302957.838509]          res 41/10:00:70:1c:e3/00:00:ff:00:00/40 Emask 0x481 (invalid argument) [ F>
May 29 07:22:46 ZFS2 kernel: [2302957.838513] ata10.00: status: { DRDY ERR }
May 29 07:22:46 ZFS2 kernel: [2302957.838516] ata10.00: error: { IDNF }
May 29 07:22:46 ZFS2 kernel: [2302957.840001] ata10.00: configured for UDMA/133
May 29 07:22:46 ZFS2 kernel: [2302957.840050] sd 9:0:0:0: [sdk] tag#3 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
May 29 07:22:46 ZFS2 kernel: [2302957.840054] sd 9:0:0:0: [sdk] tag#3 Sense Key : Illegal Request [current]
May 29 07:22:46 ZFS2 kernel: [2302957.840058] sd 9:0:0:0: [sdk] tag#3 Add. Sense: Logical block address out of range
May 29 07:22:46 ZFS2 kernel: [2302957.840068] sd 9:0:0:0: [sdk] tag#3 CDB: Write(16) 8a 00 00 00 00 00 ff e3 1c 70 00 00 00 e0 00 00
May 29 07:22:46 ZFS2 kernel: [2302957.840072] blk_update_request: I/O error, dev sdk, sector 4293074032
May 29 07:22:46 ZFS2 kernel: [2302957.840103] ata10: EH complete
May 29 07:22:46 ZFS2 zed: eid=821755 class=io pool=data
May 29 07:22:46 ZFS2 zed: eid=821756 class=io pool=data
May 29 07:22:46 ZFS2 zed: eid=821757 class=io pool=data
May 29 07:22:46 ZFS2 zed: eid=821758 class=io pool=data
May 29 07:22:46 ZFS2 zed: eid=821759 class=io pool=data
May 29 07:22:46 ZFS2 zed: eid=821760 class=io pool=data
May 29 07:22:46 ZFS2 zed: eid=821761 class=io pool=data
May 29 07:22:59 ZFS2 kernel: [2302970.856130] ata9.00: exception Emask 0x0 SAct 0xfe00 SErr 0x0 action 0x6 frozen
May 29 07:22:59 ZFS2 kernel: [2302970.856140] ata9.00: failed command: WRITE FPDMA QUEUED
May 29 07:22:59 ZFS2 kernel: [2302970.856149] ata9.00: cmd 61/e0:48:e0:0d:e3/00:00:ff:00:00/40 tag 9 ncq dma 114688 out
May 29 07:22:59 ZFS2 kernel: [2302970.856149]          res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
May 29 07:22:59 ZFS2 kernel: [2302970.856153] ata9.00: status: { DRDY }
May 29 07:22:59 ZFS2 kernel: [2302970.856156] ata9.00: failed command: WRITE FPDMA QUEUED
May 29 07:22:59 ZFS2 kernel: [2302970.856163] ata9.00: cmd 61/e0:50:c0:0e:e3/00:00:ff:00:00/40 tag 10 ncq dma 114688 out
May 29 07:22:59 ZFS2 kernel: [2302970.856163]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
May 29 07:22:59 ZFS2 kernel: [2302970.856167] ata9.00: status: { DRDY }
May 29 07:22:59 ZFS2 kernel: [2302970.856170] ata9.00: failed command: WRITE FPDMA QUEUED
May 29 07:22:59 ZFS2 kernel: [2302970.856176] ata9.00: cmd 61/e0:58:a0:0f:e3/00:00:ff:00:00/40 tag 11 ncq dma 114688 out
May 29 07:22:59 ZFS2 kernel: [2302970.856176]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
May 29 07:22:59 ZFS2 kernel: [2302970.856179] ata9.00: status: { DRDY }
May 29 07:22:59 ZFS2 kernel: [2302970.856182] ata9.00: failed command: WRITE FPDMA QUEUED
May 29 07:22:59 ZFS2 kernel: [2302970.856189] ata9.00: cmd 61/e0:60:80:10:e3/00:00:ff:00:00/40 tag 12 ncq dma 114688 out
May 29 07:22:59 ZFS2 kernel: [2302970.856189]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
May 29 07:22:59 ZFS2 kernel: [2302970.856192] ata9.00: status: { DRDY }
May 29 07:22:59 ZFS2 kernel: [2302970.856195] ata9.00: failed command: WRITE FPDMA QUEUED
May 29 07:22:59 ZFS2 kernel: [2302970.856201] ata9.00: cmd 61/e0:68:60:11:e3/00:00:ff:00:00/40 tag 13 ncq dma 114688 out
May 29 07:22:59 ZFS2 kernel: [2302970.856201]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
May 29 07:22:59 ZFS2 kernel: [2302970.856205] ata9.00: status: { DRDY }
May 29 07:22:59 ZFS2 kernel: [2302970.856207] ata9.00: failed command: WRITE FPDMA QUEUED
May 29 07:22:59 ZFS2 kernel: [2302970.856214] ata9.00: cmd 61/e0:70:40:12:e3/00:00:ff:00:00/40 tag 14 ncq dma 114688 out
May 29 07:22:59 ZFS2 kernel: [2302970.856214]          res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
May 29 07:22:59 ZFS2 kernel: [2302970.856217] ata9.00: status: { DRDY }
May 29 07:22:59 ZFS2 kernel: [2302970.856220] ata9.00: failed command: WRITE FPDMA QUEUED
May 29 07:22:59 ZFS2 kernel: [2302970.856226] ata9.00: cmd 61/e0:78:20:13:e3/00:00:ff:00:00/40 tag 15 ncq dma 114688 out
May 29 07:22:59 ZFS2 kernel: [2302970.856226]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
May 29 07:22:59 ZFS2 kernel: [2302970.856230] ata9.00: status: { DRDY }
May 29 07:22:59 ZFS2 kernel: [2302970.856236] ata9: hard resetting link
May 29 07:23:04 ZFS2 kernel: [2302976.208064] ata9: link is slow to respond, please be patient (ready=0)
May 29 07:23:09 ZFS2 kernel: [2302980.892057] ata9: COMRESET failed (errno=-16)
May 29 07:23:09 ZFS2 kernel: [2302980.892067] ata9: hard resetting link
May 29 07:23:14 ZFS2 kernel: [2302986.244053] ata9: link is slow to respond, please be patient (ready=0)
May 29 07:23:19 ZFS2 kernel: [2302990.924063] ata9: COMRESET failed (errno=-16)
May 29 07:23:19 ZFS2 kernel: [2302990.924071] ata9: hard resetting link
May 29 07:23:20 ZFS2 kernel: [2302991.776077] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
May 29 07:23:25 ZFS2 kernel: [2302996.956079] ata9.00: qc timeout (cmd 0xec)
May 29 07:23:25 ZFS2 kernel: [2302996.957165] ata9.00: failed to IDENTIFY (I/O error, err_mask=0x4)
May 29 07:23:25 ZFS2 kernel: [2302996.957181] ata9.00: revalidation failed (errno=-5)
May 29 07:23:25 ZFS2 kernel: [2302996.957190] ata9: hard resetting link
May 29 07:23:30 ZFS2 kernel: [2303002.316061] ata9: link is slow to respond, please be patient (ready=0)
May 29 07:23:35 ZFS2 kernel: [2303006.996057] ata9: COMRESET failed (errno=-16)
May 29 07:23:35 ZFS2 kernel: [2303006.996065] ata9: hard resetting link
May 29 07:23:40 ZFS2 kernel: [2303012.352061] ata9: link is slow to respond, please be patient (ready=0)
May 29 07:23:45 ZFS2 kernel: [2303017.036052] ata9: COMRESET failed (errno=-16)
May 29 07:23:45 ZFS2 kernel: [2303017.036062] ata9: hard resetting link
May 29 07:23:46 ZFS2 kernel: [2303017.960120] ata10.00: exception Emask 0x0 SAct 0x20000 SErr 0x0 action 0x6 frozen
May 29 07:23:46 ZFS2 kernel: [2303017.960128] ata10.00: failed command: WRITE FPDMA QUEUED
May 29 07:23:46 ZFS2 kernel: [2303017.960134] ata10.00: cmd 61/e0:88:18:17:fe/00:00:fe:00:00/40 tag 17 ncq dma 114688 out
May 29 07:23:46 ZFS2 kernel: [2303017.960134]          res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
May 29 07:23:46 ZFS2 kernel: [2303017.960137] ata10.00: status: { DRDY }
May 29 07:23:46 ZFS2 kernel: [2303017.960141] ata10: hard resetting link
May 29 07:23:47 ZFS2 kernel: [2303018.774838] ata10: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
May 29 07:23:50 ZFS2 kernel: [2303022.388062] ata9: link is slow to respond, please be patient (ready=0)
May 29 07:23:52 ZFS2 kernel: [2303023.836066] ata10.00: qc timeout (cmd 0xec)
May 29 07:23:52 ZFS2 kernel: [2303024.336082] ata10.00: failed to IDENTIFY (I/O error, err_mask=0x4)
May 29 07:23:52 ZFS2 kernel: [2303024.336086] ata10.00: revalidation failed (errno=-5)
May 29 07:23:52 ZFS2 kernel: [2303024.336108] ata10: hard resetting link
May 29 07:23:53 ZFS2 kernel: [2303025.150872] ata10: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
May 29 07:24:03 ZFS2 kernel: [2303035.356040] ata10.00: qc timeout (cmd 0xec)
May 29 07:24:04 ZFS2 kernel: [2303035.856863] ata10.00: failed to IDENTIFY (I/O error, err_mask=0x4)
May 29 07:24:04 ZFS2 kernel: [2303035.856879] ata10.00: revalidation failed (errno=-5)
May 29 07:24:04 ZFS2 kernel: [2303035.856886] ata10: limiting SATA link speed to 3.0 Gbps
May 29 07:24:04 ZFS2 kernel: [2303035.856891] ata10: hard resetting link
May 29 07:24:05 ZFS2 kernel: [2303036.670833] ata10: SATA link up 6.0 Gbps (SStatus 133 SControl 320)
May 29 07:24:20 ZFS2 kernel: [2303052.096063] ata9: COMRESET failed (errno=-16)
May 29 07:24:20 ZFS2 kernel: [2303052.096072] ata9: limiting SATA link speed to 3.0 Gbps
May 29 07:24:20 ZFS2 kernel: [2303052.096074] ata9: hard resetting link
May 29 07:24:25 ZFS2 kernel: [2303057.148063] ata9: COMRESET failed (errno=-16)
May 29 07:24:25 ZFS2 kernel: [2303057.148074] ata9: reset failed, giving up
May 29 07:24:25 ZFS2 kernel: [2303057.148078] ata9.00: disabled
May 29 07:24:25 ZFS2 kernel: [2303057.148129] sd 8:0:0:0: [sdj] tag#9 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
May 29 07:24:25 ZFS2 kernel: [2303057.148133] sd 8:0:0:0: [sdj] tag#9 Sense Key : Not Ready [current]
May 29 07:24:25 ZFS2 kernel: [2303057.148135] sd 8:0:0:0: [sdj] tag#9 Add. Sense: Logical unit not ready, hard reset required
May 29 07:24:25 ZFS2 kernel: [2303057.148140] sd 8:0:0:0: [sdj] tag#9 CDB: Write(16) 8a 00 00 00 00 00 ff e3 0d e0 00 00 00 e0 00 00
May 29 07:24:25 ZFS2 kernel: [2303057.148142] blk_update_request: I/O error, dev sdj, sector 4293070304
May 29 07:24:25 ZFS2 kernel: [2303057.148166] sd 8:0:0:0: [sdj] tag#10 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
May 29 07:24:25 ZFS2 kernel: [2303057.148169] sd 8:0:0:0: [sdj] tag#10 Sense Key : Not Ready [current]
May 29 07:24:25 ZFS2 kernel: [2303057.148171] sd 8:0:0:0: [sdj] tag#10 Add. Sense: Logical unit not ready, hard reset required
May 29 07:24:25 ZFS2 kernel: [2303057.148174] sd 8:0:0:0: [sdj] tag#10 CDB: Write(16) 8a 00 00 00 00 00 ff e3 0e c0 00 00 00 e0 00 00
May 29 07:24:25 ZFS2 kernel: [2303057.148176] blk_update_request: I/O error, dev sdj, sector 4293070528
May 29 07:24:25 ZFS2 kernel: [2303057.148189] sd 8:0:0:0: [sdj] tag#11 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
May 29 07:24:25 ZFS2 kernel: [2303057.148191] sd 8:0:0:0: [sdj] tag#11 Sense Key : Not Ready [current]
May 29 07:24:25 ZFS2 kernel: [2303057.148194] sd 8:0:0:0: [sdj] tag#11 Add. Sense: Logical unit not ready, hard reset required
May 29 07:24:25 ZFS2 kernel: [2303057.148196] sd 8:0:0:0: [sdj] tag#11 CDB: Write(16) 8a 00 00 00 00 00 ff e3 0f a0 00 00 00 e0 00 00
May 29 07:24:25 ZFS2 kernel: [2303057.148198] blk_update_request: I/O error, dev sdj, sector 4293070752
May 29 07:24:25 ZFS2 kernel: [2303057.148210] sd 8:0:0:0: [sdj] tag#12 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
May 29 07:24:25 ZFS2 kernel: [2303057.148212] sd 8:0:0:0: [sdj] tag#12 Sense Key : Not Ready [current]
May 29 07:24:25 ZFS2 kernel: [2303057.148214] sd 8:0:0:0: [sdj] tag#12 Add. Sense: Logical unit not ready, hard reset required
May 29 07:24:25 ZFS2 kernel: [2303057.148217] sd 8:0:0:0: [sdj] tag#12 CDB: Write(16) 8a 00 00 00 00 00 ff e3 10 80 00 00 00 e0 00 00
May 29 07:24:25 ZFS2 kernel: [2303057.148218] blk_update_request: I/O error, dev sdj, sector 4293070976
May 29 07:24:25 ZFS2 kernel: [2303057.148236] sd 8:0:0:0: [sdj] tag#13 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
May 29 07:24:25 ZFS2 kernel: [2303057.148240] sd 8:0:0:0: [sdj] tag#13 Sense Key : Not Ready [current]
May 29 07:24:25 ZFS2 kernel: [2303057.148243] sd 8:0:0:0: [sdj] tag#13 Add. Sense: Logical unit not ready, hard reset required
May 29 07:24:25 ZFS2 kernel: [2303057.148247] sd 8:0:0:0: [sdj] tag#13 CDB: Write(16) 8a 00 00 00 00 00 ff e3 11 60 00 00 00 e0 00 00
May 29 07:24:25 ZFS2 kernel: [2303057.148249] blk_update_request: I/O error, dev sdj, sector 4293071200
May 29 07:24:25 ZFS2 kernel: [2303057.148267] sd 8:0:0:0: [sdj] tag#14 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
May 29 07:24:25 ZFS2 kernel: [2303057.148270] sd 8:0:0:0: [sdj] tag#14 Sense Key : Not Ready [current]
May 29 07:24:25 ZFS2 kernel: [2303057.148272] sd 8:0:0:0: [sdj] tag#14 Add. Sense: Logical unit not ready, hard reset required
May 29 07:24:25 ZFS2 kernel: [2303057.148275] sd 8:0:0:0: [sdj] tag#14 CDB: Write(16) 8a 00 00 00 00 00 ff e3 12 40 00 00 00 e0 00 00
May 29 07:24:25 ZFS2 kernel: [2303057.148276] blk_update_request: I/O error, dev sdj, sector 4293071424
May 29 07:24:25 ZFS2 kernel: [2303057.148288] sd 8:0:0:0: [sdj] tag#15 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
May 29 07:24:25 ZFS2 kernel: [2303057.148290] sd 8:0:0:0: [sdj] tag#15 Sense Key : Not Ready [current]
May 29 07:24:25 ZFS2 kernel: [2303057.148292] sd 8:0:0:0: [sdj] tag#15 Add. Sense: Logical unit not ready, hard reset required
May 29 07:24:25 ZFS2 kernel: [2303057.148295] sd 8:0:0:0: [sdj] tag#15 CDB: Write(16) 8a 00 00 00 00 00 ff e3 13 20 00 00 00 e0 00 00
May 29 07:24:25 ZFS2 kernel: [2303057.148296] blk_update_request: I/O error, dev sdj, sector 4293071648
May 29 07:24:25 ZFS2 kernel: [2303057.148306] ata9: EH complete
May 29 07:24:25 ZFS2 kernel: [2303057.148491] sd 8:0:0:0: [sdj] tag#26 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
May 29 07:24:25 ZFS2 kernel: [2303057.148496] sd 8:0:0:0: [sdj] tag#26 CDB: Write(16) 8a 00 00 00 00 00 ff e3 14 00 00 00 00 e8 00 00
May 29 07:24:25 ZFS2 kernel: [2303057.148499] blk_update_request: I/O error, dev sdj, sector 4293071872
May 29 07:24:25 ZFS2 kernel: [2303057.148612] sd 8:0:0:0: [sdj] Read Capacity(16) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
May 29 07:24:25 ZFS2 kernel: [2303057.148613] sd 8:0:0:0: [sdj] Read Capacity(16) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
May 29 07:24:25 ZFS2 kernel: [2303057.148617] sd 8:0:0:0: [sdj] Sense not available.
May 29 07:24:25 ZFS2 kernel: [2303057.148618] sd 8:0:0:0: [sdj] Sense not available.
May 29 07:24:25 ZFS2 kernel: [2303057.148628] sd 8:0:0:0: [sdj] Read Capacity(16) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
May 29 07:24:25 ZFS2 kernel: [2303057.148632] sd 8:0:0:0: [sdj] Read Capacity(16) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
May 29 07:24:25 ZFS2 kernel: [2303057.148634] sd 8:0:0:0: [sdj] Sense not available.
May 29 07:24:25 ZFS2 kernel: [2303057.148638] sd 8:0:0:0: [sdj] Sense not available.
May 29 07:24:25 ZFS2 kernel: [2303057.148668] sd 8:0:0:0: [sdj] tag#16 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
May 29 07:24:25 ZFS2 kernel: [2303057.148673] sd 8:0:0:0: [sdj] tag#16 CDB: Write(16) 8a 00 00 00 00 00 ff e3 14 e8 00 00 00 e0 00 00
May 29 07:24:25 ZFS2 kernel: [2303057.148676] blk_update_request: I/O error, dev sdj, sector 4293072104
May 29 07:24:25 ZFS2 kernel: [2303057.148678] sd 8:0:0:0: [sdj] Read Capacity(16) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
May 29 07:24:25 ZFS2 kernel: [2303057.148681] sd 8:0:0:0: [sdj] Sense not available.
May 29 07:24:25 ZFS2 kernel: [2303057.148687] sd 8:0:0:0: [sdj] Read Capacity(16) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
May 29 07:24:25 ZFS2 kernel: [2303057.148691] sd 8:0:0:0: [sdj] Sense not available.
May 29 07:24:25 ZFS2 kernel: [2303057.148804] sd 8:0:0:0: [sdj] Read Capacity(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
May 29 07:24:25 ZFS2 kernel: [2303057.148808] sd 8:0:0:0: [sdj] Read Capacity(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
May 29 07:24:25 ZFS2 kernel: [2303057.148809] sd 8:0:0:0: [sdj] Sense not available.
May 29 07:24:25 ZFS2 kernel: [2303057.148811] sd 8:0:0:0: [sdj] Sense not available.
May 29 07:24:25 ZFS2 kernel: [2303057.148815] sd 8:0:0:0: [sdj] Read Capacity(16) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
May 29 07:24:25 ZFS2 kernel: [2303057.148818] sd 8:0:0:0: [sdj] Sense not available.
May 29 07:24:25 ZFS2 kernel: [2303057.148820] sd 8:0:0:0: [sdj] Read Capacity(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
May 29 07:24:25 ZFS2 kernel: [2303057.148822] sd 8:0:0:0: [sdj] Read Capacity(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
May 29 07:24:25 ZFS2 kernel: [2303057.148825] sd 8:0:0:0: [sdj] Sense not available.
May 29 07:24:25 ZFS2 kernel: [2303057.148826] sd 8:0:0:0: [sdj] Sense not available.
May 29 07:24:25 ZFS2 kernel: [2303057.148856] sd 8:0:0:0: [sdj] Read Capacity(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
May 29 07:24:25 ZFS2 kernel: [2303057.148860] sd 8:0:0:0: [sdj] Sense not available.
May 29 07:24:25 ZFS2 kernel: [2303057.148875] sd 8:0:0:0: [sdj] Read Capacity(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
May 29 07:24:25 ZFS2 kernel: [2303057.148879] sd 8:0:0:0: [sdj] Sense not available.
May 29 07:24:25 ZFS2 kernel: [2303057.148953] sd 8:0:0:0: [sdj] tag#18 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
May 29 07:24:25 ZFS2 kernel: [2303057.148958] sd 8:0:0:0: [sdj] tag#18 CDB: Write(16) 8a 00 00 00 00 00 ff e3 15 c8 00 00 00 e0 00 00
May 29 07:24:25 ZFS2 kernel: [2303057.148960] blk_update_request: I/O error, dev sdj, sector 4293072328
May 29 07:24:25 ZFS2 kernel: [2303057.149001] sd 8:0:0:0: [sdj] Read Capacity(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
May 29 07:24:25 ZFS2 kernel: [2303057.149003] sd 8:0:0:0: [sdj] Sense not available.
May 29 07:24:25 ZFS2 kernel: [2303057.149281] sd 8:0:0:0: [sdj] Read Capacity(16) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
May 29 07:24:25 ZFS2 kernel: [2303057.149284] sd 8:0:0:0: [sdj] Sense not available.
May 29 07:24:25 ZFS2 kernel: [2303057.149330] sd 8:0:0:0: [sdj] Read Capacity(16) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
May 29 07:24:25 ZFS2 kernel: [2303057.149333] sd 8:0:0:0: [sdj] Sense not available.
May 29 07:24:25 ZFS2 kernel: [2303057.149336] sd 8:0:0:0: [sdj] Read Capacity(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
May 29 07:24:25 ZFS2 kernel: [2303057.149338] sd 8:0:0:0: [sdj] Sense not available.
May 29 07:24:25 ZFS2 kernel: [2303057.149437] sd 8:0:0:0: [sdj] Read Capacity(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
May 29 07:24:25 ZFS2 kernel: [2303057.149438] sd 8:0:0:0: [sdj] Sense not available.
May 29 07:24:27 ZFS2 kernel: [2303058.908135] INFO: task txg_sync:2375 blocked for more than 120 seconds.
May 29 07:24:27 ZFS2 kernel: [2303058.908143]       Tainted: P           OE   4.8.0-49-generic #52~16.04.1-Ubuntu
May 29 07:24:27 ZFS2 kernel: [2303058.908145] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
May 29 07:24:27 ZFS2 kernel: [2303058.908148] txg_sync        D ffff8ccb53273ab8     0  2375      2 0x00000000
May 29 07:24:27 ZFS2 kernel: [2303058.908154]  ffff8ccb53273ab8 ffff8ccb7677d880 ffff8ccb785ac9c0 ffff8ccb5326c9c0
May 29 07:24:27 ZFS2 kernel: [2303058.908158]  ffff8ccb53273ae8 ffff8ccb53274000 ffff8ccb7f419300 7fffffffffffffff
May 29 07:24:27 ZFS2 kernel: [2303058.908162]  ffff8cbca2300360 0000000000000001 ffff8ccb53273ad0 ffffffffa2e96065
May 29 07:24:27 ZFS2 kernel: [2303058.908165] Call Trace:
May 29 07:24:27 ZFS2 kernel: [2303058.908176]  [[ffffffffa2e96065>] schedule+0x35/0x80
May 29 07:24:27 ZFS2 kernel: [2303058.908180]  [[ffffffffa2e99895>] schedule_timeout+0x235/0x3f0
May 29 07:24:27 ZFS2 kernel: [2303058.908184]  [[ffffffffa26c6db2>] ? __wake_up_common+0x52/0x90
May 29 07:24:27 ZFS2 kernel: [2303058.908189]  [[ffffffffa26fcabc>] ? ktime_get+0x3c/0xb0
May 29 07:24:27 ZFS2 kernel: [2303058.908192]  [[ffffffffa2e95834>] io_schedule_timeout+0xa4/0x110
May 29 07:24:27 ZFS2 kernel: [2303058.908206]  [[ffffffffc0793c42>] cv_wait_common+0xb2/0x130 [spl]
May 29 07:24:27 ZFS2 kernel: [2303058.908209]  [[ffffffffa26c7480>] ? wake_atomic_t_function+0x60/0x60
May 29 07:24:27 ZFS2 kernel: [2303058.908218]  [[ffffffffc0793d18>] __cv_wait_io+0x18/0x20 [spl]
May 29 07:24:27 ZFS2 kernel: [2303058.908290]  [[ffffffffc0a9e65d>] zio_wait+0xfd/0x1d0 [zfs]
May 29 07:24:27 ZFS2 kernel: [2303058.908337]  [[ffffffffc0a29fc8>] dsl_pool_sync+0xb8/0x460 [zfs]
May 29 07:24:27 ZFS2 kernel: [2303058.908388]  [[ffffffffc0a45064>] spa_sync+0x374/0xb30 [zfs]
May 29 07:24:27 ZFS2 kernel: [2303058.908392]  [[ffffffffa26af012>] ? default_wake_function+0x12/0x20
May 29 07:24:27 ZFS2 kernel: [2303058.908447]  [[ffffffffc0a55c86>] txg_sync_thread+0x3a6/0x610 [zfs]
May 29 07:24:27 ZFS2 kernel: [2303058.908451]  [[ffffffffa262c78c>] ? __switch_to+0x2dc/0x700
May 29 07:24:27 ZFS2 kernel: [2303058.908504]  [[ffffffffc0a558e0>] ? txg_delay+0x160/0x160 [zfs]
May 29 07:24:27 ZFS2 kernel: [2303058.908512]  [[ffffffffc078eee1>] thread_generic_wrapper+0x71/0x80 [spl]
May 29 07:24:27 ZFS2 kernel: [2303058.908519]  [[ffffffffc078ee70>] ? __thread_exit+0x20/0x20 [spl]
May 29 07:24:27 ZFS2 kernel: [2303058.908523]  [[ffffffffa26a3fb8>] kthread+0xd8/0xf0
May 29 07:24:27 ZFS2 kernel: [2303058.908526]  [[ffffffffa2e9aadf>] ret_from_fork+0x1f/0x40
May 29 07:24:27 ZFS2 kernel: [2303058.908530]  [[ffffffffa26a3ee0>] ? kthread_create_on_node+0x1e0/0x1e0
May 29 07:24:35 ZFS2 kernel: [2303067.100091] ata10.00: qc timeout (cmd 0xec)
May 29 07:24:35 ZFS2 kernel: [2303067.600181] ata10.00: failed to IDENTIFY (I/O error, err_mask=0x4)
May 29 07:24:35 ZFS2 kernel: [2303067.600186] ata10.00: revalidation failed (errno=-5)
May 29 07:24:35 ZFS2 kernel: [2303067.600192] ata10.00: disabled
May 29 07:24:36 ZFS2 kernel: [2303068.100984] ata10: hard resetting link
May 29 07:24:37 ZFS2 kernel: [2303068.914879] ata10: SATA link up 6.0 Gbps (SStatus 133 SControl 320)
May 29 07:24:37 ZFS2 kernel: [2303069.412368] sd 9:0:0:0: [sdk] tag#17 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
May 29 07:24:37 ZFS2 kernel: [2303069.412374] sd 9:0:0:0: [sdk] tag#17 Sense Key : Not Ready [current]
May 29 07:24:37 ZFS2 kernel: [2303069.412377] sd 9:0:0:0: [sdk] tag#17 Add. Sense: Logical unit not ready, hard reset required
May 29 07:24:37 ZFS2 kernel: [2303069.412382] sd 9:0:0:0: [sdk] tag#17 CDB: Write(16) 8a 00 00 00 00 00 fe fe 17 18 00 00 00 e0 00 00
May 29 07:24:37 ZFS2 kernel: [2303069.412386] blk_update_request: I/O error, dev sdk, sector 4278064920
May 29 07:24:37 ZFS2 kernel: [2303069.412410] ata10: EH complete
May 29 07:24:37 ZFS2 kernel: [2303069.412559] sd 9:0:0:0: [sdk] tag#18 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
May 29 07:24:37 ZFS2 kernel: [2303069.412563] sd 9:0:0:0: [sdk] tag#18 CDB: Write(16) 8a 00 00 00 00 00 fe fe 17 f8 00 00 00 e0 00 00
May 29 07:24:37 ZFS2 kernel: [2303069.412565] blk_update_request: I/O error, dev sdk, sector 4278065144
May 29 07:24:37 ZFS2 kernel: [2303069.412740] sd 9:0:0:0: [sdk] tag#22 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
May 29 07:24:37 ZFS2 kernel: [2303069.412746] sd 9:0:0:0: [sdk] tag#22 CDB: Write(16) 8a 00 00 00 00 00 fe fe 18 d8 00 00 00 e0 00 00
May 29 07:24:37 ZFS2 kernel: [2303069.412749] blk_update_request: I/O error, dev sdk, sector 4278065368
May 29 07:24:37 ZFS2 kernel: [2303069.412888] sd 9:0:0:0: [sdk] tag#26 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
May 29 07:24:37 ZFS2 kernel: [2303069.412893] sd 9:0:0:0: [sdk] tag#26 CDB: Write(16) 8a 00 00 00 00 00 fe fe 19 b8 00 00 00 e8 00 00
May 29 07:24:37 ZFS2 kernel: [2303069.412895] blk_update_request: I/O error, dev sdk, sector 4278065592
May 29 07:24:37 ZFS2 kernel: [2303069.412970] sd 9:0:0:0: [sdk] Read Capacity(16) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
May 29 07:24:37 ZFS2 kernel: [2303069.412972] sd 9:0:0:0: [sdk] Read Capacity(16) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
May 29 07:24:37 ZFS2 kernel: [2303069.412974] sd 9:0:0:0: [sdk] Sense not available.
May 29 07:24:37 ZFS2 kernel: [2303069.412975] sd 9:0:0:0: [sdk] Sense not available.
May 29 07:24:37 ZFS2 kernel: [2303069.413031] sd 9:0:0:0: [sdk] tag#5 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
May 29 07:24:37 ZFS2 kernel: [2303069.413034] sd 9:0:0:0: [sdk] tag#5 CDB: Write(16) 8a 00 00 00 00 00 fe fe 1a a0 00 00 00 e0 00 00
May 29 07:24:37 ZFS2 kernel: [2303069.413036] blk_update_request: I/O error, dev sdk, sector 4278065824
May 29 07:24:37 ZFS2 kernel: [2303069.413068] sd 9:0:0:0: [sdk] Read Capacity(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
May 29 07:24:37 ZFS2 kernel: [2303069.413071] sd 9:0:0:0: [sdk] Sense not available.
May 29 07:24:37 ZFS2 kernel: [2303069.413081] sd 9:0:0:0: [sdk] Read Capacity(16) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
May 29 07:24:37 ZFS2 kernel: [2303069.413086] sd 9:0:0:0: [sdk] Sense not available.
May 29 07:24:37 ZFS2 kernel: [2303069.413127] sd 9:0:0:0: [sdk] Read Capacity(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
May 29 07:24:37 ZFS2 kernel: [2303069.413131] sd 9:0:0:0: [sdk] Sense not available.
May 29 07:24:37 ZFS2 kernel: [2303069.413164] sd 9:0:0:0: [sdk] tag#18 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
May 29 07:24:37 ZFS2 kernel: [2303069.413169] sd 9:0:0:0: [sdk] tag#18 CDB: Write(16) 8a 00 00 00 00 00 fe fe 1b 80 00 00 00 e0 00 00
May 29 07:24:37 ZFS2 kernel: [2303069.413171] blk_update_request: I/O error, dev sdk, sector 4278066048
May 29 07:24:37 ZFS2 kernel: [2303069.413188] sd 9:0:0:0: [sdk] Read Capacity(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
May 29 07:24:37 ZFS2 kernel: [2303069.413191] sd 9:0:0:0: [sdk] Sense not available.
May 29 07:24:37 ZFS2 kernel: [2303069.413214] sd 9:0:0:0: [sdk] Read Capacity(16) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
May 29 07:24:37 ZFS2 kernel: [2303069.413216] sd 9:0:0:0: [sdk] Sense not available.
May 29 07:24:37 ZFS2 kernel: [2303069.413300] sd 9:0:0:0: [sdk] Read Capacity(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
May 29 07:24:37 ZFS2 kernel: [2303069.413302] sd 9:0:0:0: [sdk] Sense not available.
May 29 07:24:37 ZFS2 kernel: [2303069.413447] sd 9:0:0:0: [sdk] Read Capacity(16) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
May 29 07:24:37 ZFS2 kernel: [2303069.413450] sd 9:0:0:0: [sdk] Sense not available.
May 29 07:24:37 ZFS2 kernel: [2303069.413600] sd 9:0:0:0: [sdk] Read Capacity(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
May 29 07:24:37 ZFS2 kernel: [2303069.413604] sd 9:0:0:0: [sdk] Sense not available.
May 29 07:25:01 ZFS2 CRON[10087]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
May 29 07:25:08 ZFS2 kernel: [2303099.880109] ata7.00: exception Emask 0x0 SAct 0x4 SErr 0x0 action 0x6 frozen
May 29 07:25:08 ZFS2 kernel: [2303099.880118] ata7.00: failed command: WRITE FPDMA QUEUED
May 29 07:25:08 ZFS2 kernel: [2303099.880125] ata7.00: cmd 61/08:10:e0:00:03/00:00:fe:00:00/40 tag 2 ncq dma 4096 out
May 29 07:25:08 ZFS2 kernel: [2303099.880125]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
May 29 07:25:08 ZFS2 kernel: [2303099.880129] ata7.00: status: { DRDY }
May 29 07:25:08 ZFS2 kernel: [2303099.880135] ata7: hard resetting link
May 29 07:25:08 ZFS2 kernel: [2303099.880151] ata8.00: exception Emask 0x0 SAct 0x4 SErr 0x0 action 0x6 frozen
May 29 07:25:08 ZFS2 kernel: [2303099.880176] ata8.00: failed command: WRITE FPDMA QUEUED
May 29 07:25:08 ZFS2 kernel: [2303099.880181] ata8.00: cmd 61/08:10:d8:00:03/00:00:fe:00:00/40 tag 2 ncq dma 4096 out
May 29 07:25:08 ZFS2 kernel: [2303099.880181]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
May 29 07:25:08 ZFS2 kernel: [2303099.880184] ata8.00: status: { DRDY }
May 29 07:25:08 ZFS2 kernel: [2303099.880188] ata8: hard resetting link
May 29 07:25:09 ZFS2 kernel: [2303100.694822] ata8: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
May 29 07:25:09 ZFS2 kernel: [2303100.694955] ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
May 29 07:25:14 ZFS2 kernel: [2303105.756068] ata7.00: qc timeout (cmd 0xec)
May 29 07:25:14 ZFS2 kernel: [2303105.756081] ata8.00: qc timeout (cmd 0xec)
May 29 07:25:14 ZFS2 kernel: [2303106.256474] ata8.00: failed to IDENTIFY (I/O error, err_mask=0x4)
May 29 07:25:14 ZFS2 kernel: [2303106.256477] ata8.00: revalidation failed (errno=-5)
May 29 07:25:14 ZFS2 kernel: [2303106.256488] ata8: hard resetting link
May 29 07:25:14 ZFS2 kernel: [2303106.256989] ata7.00: failed to IDENTIFY (I/O error, err_mask=0x4)
May 29 07:25:14 ZFS2 kernel: [2303106.256991] ata7.00: revalidation failed (errno=-5)
May 29 07:25:14 ZFS2 kernel: [2303106.256995] ata7: hard resetting link
May 29 07:25:15 ZFS2 kernel: [2303107.070813] ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
May 29 07:25:15 ZFS2 kernel: [2303107.070953] ata8: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
May 29 07:25:25 ZFS2 kernel: [2303117.276077] ata8.00: qc timeout (cmd 0xec)
May 29 07:25:25 ZFS2 kernel: [2303117.276103] ata7.00: qc timeout (cmd 0xec)
May 29 07:25:26 ZFS2 kernel: [2303117.776394] ata7.00: failed to IDENTIFY (I/O error, err_mask=0x4)
May 29 07:25:26 ZFS2 kernel: [2303117.776397] ata7.00: revalidation failed (errno=-5)
May 29 07:25:26 ZFS2 kernel: [2303117.776418] ata7: limiting SATA link speed to 3.0 Gbps
May 29 07:25:26 ZFS2 kernel: [2303117.776423] ata7: hard resetting link
May 29 07:25:26 ZFS2 kernel: [2303117.776829] ata8.00: failed to IDENTIFY (I/O error, err_mask=0x4)
May 29 07:25:26 ZFS2 kernel: [2303117.776830] ata8.00: revalidation failed (errno=-5)
May 29 07:25:26 ZFS2 kernel: [2303117.776834] ata8: limiting SATA link speed to 3.0 Gbps
May 29 07:25:26 ZFS2 kernel: [2303117.776836] ata8: hard resetting link
May 29 07:25:26 ZFS2 kernel: [2303118.590951] ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 320)
May 29 07:25:26 ZFS2 kernel: [2303118.591067] ata8: SATA link up 6.0 Gbps (SStatus 133 SControl 320)
May 29 07:25:57 ZFS2 kernel: [2303149.020074] ata7.00: qc timeout (cmd 0xec)
May 29 07:25:57 ZFS2 kernel: [2303149.020083] ata8.00: qc timeout (cmd 0xec)
May 29 07:25:57 ZFS2 kernel: [2303149.520610] ata7.00: failed to IDENTIFY (I/O error, err_mask=0x4)
May 29 07:25:57 ZFS2 kernel: [2303149.520613] ata7.00: revalidation failed (errno=-5)
May 29 07:25:57 ZFS2 kernel: [2303149.520620] ata7.00: disabled
May 29 07:25:57 ZFS2 kernel: [2303149.520859] ata8.00: failed to IDENTIFY (I/O error, err_mask=0x4)
May 29 07:25:57 ZFS2 kernel: [2303149.520861] ata8.00: revalidation failed (errno=-5)
May 29 07:25:57 ZFS2 kernel: [2303149.520864] ata8.00: disabled
May 29 07:25:58 ZFS2 kernel: [2303150.020916] ata8: hard resetting link
May 29 07:25:58 ZFS2 kernel: [2303150.021015] ata7: hard resetting link
May 29 07:25:59 ZFS2 kernel: [2303150.834476] ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 320)
May 29 07:25:59 ZFS2 kernel: [2303150.834666] ata8: SATA link up 6.0 Gbps (SStatus 133 SControl 320)
May 29 07:25:59 ZFS2 kernel: [2303151.332226] sd 7:0:0:0: [sdh] tag#2 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
May 29 07:25:59 ZFS2 kernel: [2303151.332232] sd 7:0:0:0: [sdh] tag#2 Sense Key : Not Ready [current]
May 29 07:25:59 ZFS2 kernel: [2303151.332235] sd 7:0:0:0: [sdh] tag#2 Add. Sense: Logical unit not ready, hard reset required
May 29 07:25:59 ZFS2 kernel: [2303151.332240] sd 7:0:0:0: [sdh] tag#2 CDB: Write(16) 8a 00 00 00 00 00 fe 03 00 d8 00 00 00 08 00 00
May 29 07:25:59 ZFS2 kernel: [2303151.332244] blk_update_request: I/O error, dev sdh, sector 4261609688
May 29 07:25:59 ZFS2 kernel: [2303151.332270] ata8: EH complete
May 29 07:25:59 ZFS2 kernel: [2303151.332343] sd 6:0:0:0: [sdg] tag#2 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
May 29 07:25:59 ZFS2 kernel: [2303151.332347] sd 6:0:0:0: [sdg] tag#2 Sense Key : Not Ready [current]
May 29 07:25:59 ZFS2 kernel: [2303151.332350] sd 6:0:0:0: [sdg] tag#2 Add. Sense: Logical unit not ready, hard reset required
May 29 07:25:59 ZFS2 kernel: [2303151.332353] sd 6:0:0:0: [sdg] tag#2 CDB: Write(16) 8a 00 00 00 00 00 fe 03 00 e0 00 00 00 08 00 00
May 29 07:25:59 ZFS2 kernel: [2303151.332356] blk_update_request: I/O error, dev sdg, sector 4261609696
May 29 07:25:59 ZFS2 kernel: [2303151.332376] ata7: EH complete
May 29 07:25:59 ZFS2 kernel: [2303151.332648] sd 7:0:0:0: [sdh] Read Capacity(16) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
May 29 07:25:59 ZFS2 kernel: [2303151.332652] sd 7:0:0:0: [sdh] Sense not available.
May 29 07:25:59 ZFS2 kernel: [2303151.332707] sd 6:0:0:0: [sdg] Read Capacity(16) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
May 29 07:25:59 ZFS2 kernel: [2303151.332710] sd 6:0:0:0: [sdg] Sense not available.
May 29 07:25:59 ZFS2 kernel: [2303151.332817] sd 7:0:0:0: [sdh] Read Capacity(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
May 29 07:25:59 ZFS2 kernel: [2303151.332820] sd 7:0:0:0: [sdh] Sense not available.
May 29 07:25:59 ZFS2 kernel: [2303151.332870] sd 6:0:0:0: [sdg] Read Capacity(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
May 29 07:25:59 ZFS2 kernel: [2303151.332872] sd 6:0:0:0: [sdg] Sense not available.
May 29 07:25:59 ZFS2 kernel: [2303151.338577] WARNING: Pool 'data' has encountered an uncorrectable I/O failure and has been suspended.
May 29 07:25:59 ZFS2 kernel: [2303151.338577]
May 29 07:25:59 ZFS2 zed: eid=821762 class=data pool=data
May 29 07:25:59 ZFS2 zed: eid=821763 class=data pool=data
May 29 07:25:59 ZFS2 zed: eid=821764 class=data pool=data
May 29 07:25:59 ZFS2 zed: eid=821765 class=data pool=data
May 29 07:25:59 ZFS2 zed: eid=821766 class=data pool=data
May 29 07:25:59 ZFS2 zed: eid=821767 class=data pool=data
May 29 07:25:59 ZFS2 zed: eid=821768 class=data pool=data
May 29 07:25:59 ZFS2 zed: eid=821769 class=io_failure pool=data
May 29 07:26:42 ZFS2 systemd[1]: Started CUPS Scheduler.
May 29 07:28:28 ZFS2 kernel: [2303300.572139] INFO: task txg_sync:2375 blocked for more than 120 seconds.
May 29 07:28:28 ZFS2 kernel: [2303300.572147]       Tainted: P           OE   4.8.0-49-generic #52~16.04.1-Ubuntu
May 29 07:28:28 ZFS2 kernel: [2303300.572149] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
May 29 07:28:28 ZFS2 kernel: [2303300.572152] txg_sync        D ffff8ccb53273ab8     0  2375      2 0x00000000
May 29 07:28:28 ZFS2 kernel: [2303300.572159]  ffff8ccb53273ab8 ffff8ccb7677d880 ffff8ccb785ac9c0 ffff8ccb5326c9c0
May 29 07:28:28 ZFS2 kernel: [2303300.572163]  ffff8ccb53273ae8 ffff8ccb53274000 ffff8ccb7f419300 7fffffffffffffff
May 29 07:28:28 ZFS2 kernel: [2303300.572166]  ffff8cbde0b394a0 0000000000000001 ffff8ccb53273ad0 ffffffffa2e96065
May 29 07:28:28 ZFS2 kernel: [2303300.572170] Call Trace:
May 29 07:28:28 ZFS2 kernel: [2303300.572180]  [[ffffffffa2e96065>] schedule+0x35/0x80
May 29 07:28:28 ZFS2 kernel: [2303300.572184]  [[ffffffffa2e99895>] schedule_timeout+0x235/0x3f0
May 29 07:28:28 ZFS2 kernel: [2303300.572188]  [[ffffffffa26c6db2>] ? __wake_up_common+0x52/0x90
May 29 07:28:28 ZFS2 kernel: [2303300.572192]  [[ffffffffa26fcabc>] ? ktime_get+0x3c/0xb0
May 29 07:28:28 ZFS2 kernel: [2303300.572196]  [[ffffffffa2e95834>] io_schedule_timeout+0xa4/0x110
May 29 07:28:28 ZFS2 kernel: [2303300.572210]  [[ffffffffc0793c42>] cv_wait_common+0xb2/0x130 [spl]
May 29 07:28:28 ZFS2 kernel: [2303300.572213]  [[ffffffffa26c7480>] ? wake_atomic_t_function+0x60/0x60
May 29 07:28:28 ZFS2 kernel: [2303300.572221]  [[ffffffffc0793d18>] __cv_wait_io+0x18/0x20 [spl]
May 29 07:28:28 ZFS2 kernel: [2303300.572294]  [[ffffffffc0a9e65d>] zio_wait+0xfd/0x1d0 [zfs]
May 29 07:28:28 ZFS2 kernel: [2303300.572341]  [[ffffffffc0a2a1ed>] dsl_pool_sync+0x2dd/0x460 [zfs]
May 29 07:28:28 ZFS2 kernel: [2303300.572392]  [[ffffffffc0a45064>] spa_sync+0x374/0xb30 [zfs]
May 29 07:28:28 ZFS2 kernel: [2303300.572397]  [[ffffffffa26af012>] ? default_wake_function+0x12/0x20
May 29 07:28:28 ZFS2 kernel: [2303300.572451]  [[ffffffffc0a55c86>] txg_sync_thread+0x3a6/0x610 [zfs]
May 29 07:28:28 ZFS2 kernel: [2303300.572455]  [[ffffffffa262c78c>] ? __switch_to+0x2dc/0x700
May 29 07:28:28 ZFS2 kernel: [2303300.572508]  [[ffffffffc0a558e0>] ? txg_delay+0x160/0x160 [zfs]
May 29 07:28:28 ZFS2 kernel: [2303300.572515]  [[ffffffffc078eee1>] thread_generic_wrapper+0x71/0x80 [spl]
May 29 07:28:28 ZFS2 kernel: [2303300.572522]  [[ffffffffc078ee70>] ? __thread_exit+0x20/0x20 [spl]
May 29 07:28:28 ZFS2 kernel: [2303300.572526]  [[ffffffffa26a3fb8>] kthread+0xd8/0xf0
May 29 07:28:28 ZFS2 kernel: [2303300.572529]  [[ffffffffa2e9aadf>] ret_from_fork+0x1f/0x40
May 29 07:28:28 ZFS2 kernel: [2303300.572533]  [[ffffffffa26a3ee0>] ? kthread_create_on_node+0x1e0/0x1e0
May 29 07:28:59 ZFS2 zed: eid=821770 class=io pool=data
May 29 07:28:59 ZFS2 kernel: [2303331.598561] WARNING: Pool 'data' has encountered an uncorrectable I/O failure and has been suspended.
May 29 07:28:59 ZFS2 kernel: [2303331.598561]
May 29 07:29:00 ZFS2 zed: eid=821771 class=io pool=data
May 29 07:29:00 ZFS2 zed: eid=821772 class=io pool=data
May 29 07:29:00 ZFS2 zed: eid=821773 class=io pool=data
May 29 07:29:00 ZFS2 zed: eid=821774 class=data pool=data
May 29 07:29:00 ZFS2 zed: eid=821775 class=io_failure pool=data
May 29 07:29:57 ZFS2 systemd[1]: Started Session 4610 of user miho.
May 29 07:30:02 ZFS2 CRON[10548]: (root) CMD (test -x /etc/init.d/anacron && /usr/sbin/invoke-rc.d anacron start >/dev/null)
May 29 07:30:02 ZFS2 systemd[1]: Started Run anacron jobs.
May 29 07:30:02 ZFS2 anacron[10570]: Anacron 2.3 started on 2017-05-29
May 29 07:30:02 ZFS2 anacron[10570]: Will run job `cron.daily' in 5 min.
May 29 07:30:02 ZFS2 anacron[10570]: Jobs will be executed sequentially
May 29 07:30:29 ZFS2 kernel: [2303421.404151] INFO: task txg_sync:2375 blocked for more than 120 seconds.
May 29 07:30:29 ZFS2 kernel: [2303421.404158]       Tainted: P           OE   4.8.0-49-generic #52~16.04.1-Ubuntu
May 29 07:30:29 ZFS2 kernel: [2303421.404159] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
May 29 07:30:29 ZFS2 kernel: [2303421.404162] txg_sync        D ffff8ccb53273ab8     0  2375      2 0x00000000
May 29 07:30:29 ZFS2 kernel: [2303421.404167]  ffff8ccb53273ab8 ffff8ccb7677d880 ffff8ccb785ac9c0 ffff8ccb5326c9c0
May 29 07:30:29 ZFS2 kernel: [2303421.404171]  ffff8ccb53273ae8 ffff8ccb53274000 ffff8ccb7f419300 7fffffffffffffff
May 29 07:30:29 ZFS2 kernel: [2303421.404173]  ffff8cbde0b394a0 0000000000000001 ffff8ccb53273ad0 ffffffffa2e96065
May 29 07:30:29 ZFS2 kernel: [2303421.404177] Call Trace:
May 29 07:30:29 ZFS2 kernel: [2303421.404185]  [[ffffffffa2e96065>] schedule+0x35/0x80
May 29 07:30:29 ZFS2 kernel: [2303421.404188]  [[ffffffffa2e99895>] schedule_timeout+0x235/0x3f0
May 29 07:30:29 ZFS2 kernel: [2303421.404192]  [[ffffffffa26c6db2>] ? __wake_up_common+0x52/0x90
May 29 07:30:29 ZFS2 kernel: [2303421.404195]  [[ffffffffa26fcabc>] ? ktime_get+0x3c/0xb0
May 29 07:30:29 ZFS2 kernel: [2303421.404198]  [[ffffffffa2e95834>] io_schedule_timeout+0xa4/0x110
May 29 07:30:29 ZFS2 kernel: [2303421.404210]  [[ffffffffc0793c42>] cv_wait_common+0xb2/0x130 [spl]
May 29 07:30:29 ZFS2 kernel: [2303421.404212]  [[ffffffffa26c7480>] ? wake_atomic_t_function+0x60/0x60
May 29 07:30:29 ZFS2 kernel: [2303421.404219]  [[ffffffffc0793d18>] __cv_wait_io+0x18/0x20 [spl]
May 29 07:30:29 ZFS2 kernel: [2303421.404280]  [[ffffffffc0a9e65d>] zio_wait+0xfd/0x1d0 [zfs]
May 29 07:30:29 ZFS2 kernel: [2303421.404318]  [[ffffffffc0a2a1ed>] dsl_pool_sync+0x2dd/0x460 [zfs]
May 29 07:30:29 ZFS2 kernel: [2303421.404361]  [[ffffffffc0a45064>] spa_sync+0x374/0xb30 [zfs]
May 29 07:30:29 ZFS2 kernel: [2303421.404365]  [[ffffffffa26af012>] ? default_wake_function+0x12/0x20
May 29 07:30:29 ZFS2 kernel: [2303421.404410]  [[ffffffffc0a55c86>] txg_sync_thread+0x3a6/0x610 [zfs]
May 29 07:30:29 ZFS2 kernel: [2303421.404413]  [[ffffffffa262c78c>] ? __switch_to+0x2dc/0x700
May 29 07:30:29 ZFS2 kernel: [2303421.404457]  [[ffffffffc0a558e0>] ? txg_delay+0x160/0x160 [zfs]
May 29 07:30:29 ZFS2 kernel: [2303421.404463]  [[ffffffffc078eee1>] thread_generic_wrapper+0x71/0x80 [spl]
May 29 07:30:29 ZFS2 kernel: [2303421.404469]  [[ffffffffc078ee70>] ? __thread_exit+0x20/0x20 [spl]
May 29 07:30:29 ZFS2 kernel: [2303421.404472]  [[ffffffffa26a3fb8>] kthread+0xd8/0xf0
May 29 07:30:29 ZFS2 kernel: [2303421.404475]  [[ffffffffa2e9aadf>] ret_from_fork+0x1f/0x40
May 29 07:30:29 ZFS2 kernel: [2303421.404477]  [[ffffffffa26a3ee0>] ? kthread_create_on_node+0x1e0/0x1e0
May 29 07:30:36 ZFS2 udisksd[4066]: Error performing housekeeping for drive /org/freedesktop/UDisks2/drives/WDC_WD30EFRX_68EUZN0_WD_WMC4N2328418: Error updating SMART data: Error sending ATA command CHECK POWER MODE: Unexpected sense data returned:#0120000: 00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00    ................#0120010: 00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00    ................#012 (g-io-error-quark, 0)
May 29 07:30:36 ZFS2 kernel: [2303428.340749] sd 6:0:0:0: [sdg] tag#15 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
May 29 07:30:36 ZFS2 kernel: [2303428.340755] sd 6:0:0:0: [sdg] tag#15 CDB: ATA command pass through(16) 85 06 20 00 00 00 00 00 00 00 00 00 00 00 e5 00
May 29 07:30:36 ZFS2 udisksd[4066]: Error performing housekeeping for drive /org/freedesktop/UDisks2/drives/WDC_WD30EFRX_68EUZN0_WD_WMC4N2402071: Error updating SMART data: Error sending ATA command CHECK POWER MODE: Unexpected sense data returned:#0120000: 00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00    ................#0120010: 00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00    ................#012 (g-io-error-quark, 0)
May 29 07:30:36 ZFS2 kernel: [2303428.445545] sd 8:0:0:0: [sdj] tag#16 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
May 29 07:30:36 ZFS2 kernel: [2303428.445547] sd 8:0:0:0: [sdj] tag#16 CDB: ATA command pass through(16) 85 06 20 00 00 00 00 00 00 00 00 00 00 00 e5 00
May 29 07:30:36 ZFS2 udisksd[4066]: Error performing housekeeping for drive /org/freedesktop/UDisks2/drives/WDC_WD30EFRX_68EUZN0_WD_WMC4N2401629: Error updating SMART data: Error sending ATA command CHECK POWER MODE: Unexpected sense data returned:#0120000: 00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00    ................#0120010: 00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00    ................#012 (g-io-error-quark, 0)
May 29 07:30:36 ZFS2 kernel: [2303428.589159] sd 9:0:0:0: [sdk] tag#23 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
May 29 07:30:36 ZFS2 kernel: [2303428.589163] sd 9:0:0:0: [sdk] tag#23 CDB: ATA command pass through(16) 85 06 20 00 00 00 00 00 00 00 00 00 00 00 e5 00
May 29 07:30:37 ZFS2 kernel: [2303428.843935] sd 7:0:0:0: [sdh] tag#16 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
May 29 07:30:37 ZFS2 kernel: [2303428.843938] sd 7:0:0:0: [sdh] tag#16 CDB: ATA command pass through(16) 85 06 20 00 00 00 00 00 00 00 00 00 00 00 e5 00
May 29 07:30:37 ZFS2 udisksd[4066]: Error performing housekeeping for drive /org/freedesktop/UDisks2/drives/WDC_WD30EFRX_68EUZN0_WD_WMC4N2327966: Error updating SMART data: Error sending ATA command CHECK POWER MODE: Unexpected sense data returned:#0120000: 00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00    ................#0120010: 00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00    ................#012 (g-io-error-quark, 0)

Zkratka disky sdg,h,k,j vypadly. Vsechny visi na SATA controller: Marvell Technology Group Ltd. 88SE9230 PCIe SATA 6Gb/s Controller (rev 11)

Po rebootu (a kratkem boji se ZFS aby pripojil pool) se zdalo byt vse ok. Tak jsem pustil scrub a za cca 45 minut:

[ 1836.508085] ata10.00: qc timeout (cmd 0x47)
[ 1836.509169] ata10.00: READ LOG DMA EXT failed, trying unqueued
[ 1836.509173] ata10: failed to read log page 10h (errno=-5)
[ 1836.509184] ata10.00: exception Emask 0x1 SAct 0x3c000 SErr 0x0 action 0x6 frozen
[ 1836.509187] ata10.00: irq_stat 0x40000008
[ 1836.509191] ata10.00: failed command: WRITE FPDMA QUEUED
[ 1836.509199] ata10.00: cmd 61/08:70:68:09:00/00:00:00:00:00/40 tag 14 ncq dma 4096 out
                        res 50/00:00:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 1836.509203] ata10.00: status: { DRDY }
[ 1836.509206] ata10.00: failed command: WRITE FPDMA QUEUED
[ 1836.509213] ata10.00: cmd 61/08:78:68:0b:00/00:00:00:00:00/40 tag 15 ncq dma 4096 out
                        res 50/00:00:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 1836.509216] ata10.00: status: { DRDY }
[ 1836.509219] ata10.00: failed command: WRITE FPDMA QUEUED
[ 1836.509226] ata10.00: cmd 61/08:80:68:5d:50/00:00:5d:01:00/40 tag 16 ncq dma 4096 out
                        res 50/00:00:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 1836.509229] ata10.00: status: { DRDY }
[ 1836.509232] ata10.00: failed command: WRITE FPDMA QUEUED
[ 1836.509238] ata10.00: cmd 61/08:88:68:5f:50/00:00:5d:01:00/40 tag 17 ncq dma 4096 out
                        res 50/00:00:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 1836.509242] ata10.00: status: { DRDY }
[ 1836.509248] ata10: hard resetting link
[ 1836.822760] ata10: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1836.824427] ata10.00: configured for UDMA/133
[ 1836.824448] sd 9:0:0:0: [sdk] tag#14 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1836.824452] sd 9:0:0:0: [sdk] tag#14 Sense Key : Illegal Request [current]
[ 1836.824456] sd 9:0:0:0: [sdk] tag#14 Add. Sense: Unaligned write command
[ 1836.824461] sd 9:0:0:0: [sdk] tag#14 CDB: Write(16) 8a 00 00 00 00 00 00 00 09 68 00 00 00 08 00 00
[ 1836.824464] blk_update_request: I/O error, dev sdk, sector 2408
[ 1836.824489] sd 9:0:0:0: [sdk] tag#15 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1836.824492] sd 9:0:0:0: [sdk] tag#15 Sense Key : Illegal Request [current]
[ 1836.824495] sd 9:0:0:0: [sdk] tag#15 Add. Sense: Unaligned write command
[ 1836.824499] sd 9:0:0:0: [sdk] tag#15 CDB: Write(16) 8a 00 00 00 00 00 00 00 0b 68 00 00 00 08 00 00
[ 1836.824500] blk_update_request: I/O error, dev sdk, sector 2920
[ 1836.824509] sd 9:0:0:0: [sdk] tag#16 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1836.824512] sd 9:0:0:0: [sdk] tag#16 Sense Key : Illegal Request [current]
[ 1836.824515] sd 9:0:0:0: [sdk] tag#16 Add. Sense: Unaligned write command
[ 1836.824518] sd 9:0:0:0: [sdk] tag#16 CDB: Write(16) 8a 00 00 00 00 01 5d 50 5d 68 00 00 00 08 00 00
[ 1836.824519] blk_update_request: I/O error, dev sdk, sector 5860515176
[ 1836.824528] sd 9:0:0:0: [sdk] tag#17 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1836.824531] sd 9:0:0:0: [sdk] tag#17 Sense Key : Illegal Request [current]
[ 1836.824534] sd 9:0:0:0: [sdk] tag#17 Add. Sense: Unaligned write command
[ 1836.824536] sd 9:0:0:0: [sdk] tag#17 CDB: Write(16) 8a 00 00 00 00 01 5d 50 5f 68 00 00 00 08 00 00
[ 1836.824538] blk_update_request: I/O error, dev sdk, sector 5860515688
[ 1836.824545] ata10: EH complete
[ 1844.712111] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 1844.712120] ata9.00: failed command: SMART
[ 1844.712128] ata9.00: cmd b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 10
                        res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 1844.712132] ata9.00: status: { DRDY }
[ 1844.712139] ata9: hard resetting link
[ 1845.030729] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1845.032403] ata9.00: configured for UDMA/133
[ 1845.032427] ata9: EH complete
[ 1889.768101] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 1889.768110] ata9.00: failed command: IDENTIFY DEVICE
[ 1889.768118] ata9.00: cmd ec/00:01:00:00:00/00:00:00:00:00/00 tag 11 pio 512 in
                        res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 1889.768122] ata9.00: status: { DRDY }
[ 1889.768128] ata9: hard resetting link
[ 1890.082732] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1890.084226] ata9.00: configured for UDMA/133
[ 1890.084255] ata9: EH complete
[ 1907.688079] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 1907.688088] ata10.00: failed command: FLUSH CACHE EXT
[ 1907.688096] ata10.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 14
                        res 40/00:00:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 1907.688100] ata10.00: status: { DRDY }
[ 1907.688107] ata10: hard resetting link
[ 1908.006744] ata10: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1908.040799] ata10.00: configured for UDMA/133
[ 1908.040804] ata10.00: retrying FLUSH 0xea Emask 0x4
[ 1908.040944] ata10: EH complete
[ 1915.720080] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 1915.720088] ata10.00: failed command: SMART
[ 1915.720096] ata10.00: cmd b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 9
                        res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 1915.720100] ata10.00: status: { DRDY }
[ 1915.720106] ata10: hard resetting link
[ 1916.034901] ata10: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1916.036485] ata10.00: configured for UDMA/133
[ 1916.036507] ata10: EH complete
[ 2628.584112] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2628.584121] ata10.00: failed command: FLUSH CACHE EXT
[ 2628.584129] ata10.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0
                        res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 2628.584133] ata10.00: status: { DRDY }
[ 2628.584140] ata10: hard resetting link
[ 2628.584155] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2628.584162] ata9.00: failed command: FLUSH CACHE EXT
[ 2628.584171] ata9.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 12
                        res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 2628.584175] ata9.00: status: { DRDY }
[ 2628.584180] ata9: hard resetting link
[ 2633.936057] ata10: link is slow to respond, please be patient (ready=0)
[ 2633.944051] ata9: link is slow to respond, please be patient (ready=0)
[ 2638.616057] ata10: COMRESET failed (errno=-16)
[ 2638.616065] ata10: hard resetting link
[ 2638.624048] ata9: COMRESET failed (errno=-16)
[ 2638.624055] ata9: hard resetting link
[ 2643.976056] ata9: link is slow to respond, please be patient (ready=0)
[ 2643.988064] ata10: link is slow to respond, please be patient (ready=0)
[ 2648.656058] ata9: COMRESET failed (errno=-16)
[ 2648.656068] ata9: hard resetting link
[ 2648.668055] ata10: COMRESET failed (errno=-16)
[ 2648.668062] ata10: hard resetting link
[ 2649.460062] ata10: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2654.008082] ata9: link is slow to respond, please be patient (ready=0)
[ 2654.684071] ata10.00: qc timeout (cmd 0xec)
[ 2654.685155] ata10.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 2654.685158] ata10.00: revalidation failed (errno=-5)
[ 2654.685168] ata10: hard resetting link
[ 2660.036056] ata10: link is slow to respond, please be patient (ready=0)
[ 2664.728057] ata10: COMRESET failed (errno=-16)
[ 2664.728066] ata10: hard resetting link
[ 2670.044058] ata10: link is slow to respond, please be patient (ready=0)
[ 2670.388063] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2670.584063] ata10: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2670.586973] ata10.00: failed to read native max address (err_mask=0x1)
[ 2670.586976] ata10.00: HPA support seems broken, skipping HPA handling
[ 2670.589377] ata10.00: failed to enable AA (error_mask=0x1)
[ 2670.594657] ata10.00: failed to enable AA (error_mask=0x1)
[ 2670.594681] ata10.00: configured for UDMA/133 (device error ignored)
[ 2670.594685] ata10.00: retrying FLUSH 0xea Emask 0x4
[ 2670.596949] ata10.00: FLUSH failed Emask 0x1
[ 2670.596954] ata10.00: device reported invalid CHS sector 0
[ 2670.598043] ata10: EH complete
[ 2670.609194] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2670.609200] ata10.00: irq_stat 0x40000001
[ 2670.609203] ata10.00: failed command: FLUSH CACHE EXT
[ 2670.609211] ata10.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 2
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2670.609215] ata10.00: status: { DRDY ERR }
[ 2670.609218] ata10.00: error: { ABRT }
[ 2670.612227] ata10.00: failed to enable AA (error_mask=0x1)
[ 2670.617638] ata10.00: failed to enable AA (error_mask=0x1)
[ 2670.617650] ata10.00: configured for UDMA/133 (device error ignored)
[ 2670.617654] ata10.00: device reported invalid CHS sector 0
[ 2670.618760] ata10: EH complete
[ 2670.629209] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2670.629214] ata10.00: irq_stat 0x40000001
[ 2670.629218] ata10.00: failed command: FLUSH CACHE EXT
[ 2670.629225] ata10.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 5
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2670.629228] ata10.00: status: { DRDY ERR }
[ 2670.629231] ata10.00: error: { ABRT }
[ 2670.632183] ata10.00: failed to enable AA (error_mask=0x1)
[ 2670.637469] ata10.00: failed to enable AA (error_mask=0x1)
[ 2670.637494] ata10.00: configured for UDMA/133 (device error ignored)
[ 2670.637498] ata10.00: device reported invalid CHS sector 0
[ 2670.638573] ata10: EH complete
[ 2670.649212] ata10.00: NCQ disabled due to excessive errors
[ 2670.649217] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2670.649221] ata10.00: irq_stat 0x40000001
[ 2670.649225] ata10.00: failed command: FLUSH CACHE EXT
[ 2670.649232] ata10.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 7
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2670.649235] ata10.00: status: { DRDY ERR }
[ 2670.649238] ata10.00: error: { ABRT }
[ 2670.652186] ata10.00: failed to enable AA (error_mask=0x1)
[ 2670.657569] ata10.00: failed to enable AA (error_mask=0x1)
[ 2670.657580] ata10.00: configured for UDMA/133 (device error ignored)
[ 2670.657585] ata10.00: device reported invalid CHS sector 0
[ 2670.658689] ata10: EH complete
[ 2670.669358] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2670.669363] ata10.00: irq_stat 0x40000001
[ 2670.669367] ata10.00: failed command: FLUSH CACHE EXT
[ 2670.669374] ata10.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 9
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2670.669378] ata10.00: status: { DRDY ERR }
[ 2670.669380] ata10.00: error: { ABRT }
[ 2670.672324] ata10.00: failed to enable AA (error_mask=0x1)
[ 2670.677707] ata10.00: failed to enable AA (error_mask=0x1)
[ 2670.677719] ata10.00: configured for UDMA/133 (device error ignored)
[ 2670.677723] ata10.00: device reported invalid CHS sector 0
[ 2670.678827] ata10: EH complete
[ 2670.693244] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2670.693249] ata10.00: irq_stat 0x40000001
[ 2670.693253] ata10.00: failed command: FLUSH CACHE EXT
[ 2670.693260] ata10.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 21
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2670.693263] ata10.00: status: { DRDY ERR }
[ 2670.693266] ata10.00: error: { ABRT }
[ 2670.696204] ata10.00: failed to enable AA (error_mask=0x1)
[ 2670.701574] ata10.00: failed to enable AA (error_mask=0x1)
[ 2670.701586] ata10.00: configured for UDMA/133 (device error ignored)
[ 2670.701590] ata10.00: device reported invalid CHS sector 0
[ 2670.702697] sd 9:0:0:0: [sdk] tag#21 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2670.702702] sd 9:0:0:0: [sdk] tag#21 Sense Key : Illegal Request [current]
[ 2670.702705] sd 9:0:0:0: [sdk] tag#21 Add. Sense: Unaligned write command
[ 2670.702710] sd 9:0:0:0: [sdk] tag#21 CDB: Synchronize Cache(10) 35 00 00 00 00 00 00 00 00 00
[ 2670.702716] blk_update_request: I/O error, dev sdk, sector 0
[ 2670.702736] ata10: EH complete
[ 2675.420082] ata9.00: qc timeout (cmd 0xec)
[ 2675.421150] ata9.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 2675.421153] ata9.00: revalidation failed (errno=-5)
[ 2675.421161] ata9: hard resetting link
[ 2675.734905] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2675.737843] ata9.00: failed to read native max address (err_mask=0x1)
[ 2675.737845] ata9.00: HPA support seems broken, skipping HPA handling
[ 2675.740229] ata9.00: failed to enable AA (error_mask=0x1)
[ 2675.745483] ata9.00: failed to enable AA (error_mask=0x1)
[ 2675.745494] ata9.00: configured for UDMA/133 (device error ignored)
[ 2675.745497] ata9.00: retrying FLUSH 0xea Emask 0x4
[ 2675.747826] ata9.00: FLUSH failed Emask 0x1
[ 2675.747843] ata9.00: device reported invalid CHS sector 0
[ 2675.748925] ata9: EH complete
[ 2675.761195] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2675.761201] ata9.00: irq_stat 0x40000001
[ 2675.761204] ata9.00: failed command: FLUSH CACHE EXT
[ 2675.761212] ata9.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 14
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2675.761216] ata9.00: status: { DRDY ERR }
[ 2675.761219] ata9.00: error: { ABRT }
[ 2675.764176] ata9.00: failed to enable AA (error_mask=0x1)
[ 2675.769429] ata9.00: failed to enable AA (error_mask=0x1)
[ 2675.769453] ata9.00: configured for UDMA/133 (device error ignored)
[ 2675.769457] ata9.00: device reported invalid CHS sector 0
[ 2675.770531] ata9: EH complete
[ 2675.781231] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2675.781236] ata9.00: irq_stat 0x40000001
[ 2675.781240] ata9.00: failed command: FLUSH CACHE EXT
[ 2675.781247] ata9.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 18
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2675.781251] ata9.00: status: { DRDY ERR }
[ 2675.781253] ata9.00: error: { ABRT }
[ 2675.784200] ata9.00: failed to enable AA (error_mask=0x1)
[ 2675.789584] ata9.00: failed to enable AA (error_mask=0x1)
[ 2675.789596] ata9.00: configured for UDMA/133 (device error ignored)
[ 2675.789600] ata9.00: device reported invalid CHS sector 0
[ 2675.790705] ata9: EH complete
[ 2675.801188] ata9.00: NCQ disabled due to excessive errors
[ 2675.801192] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2675.801197] ata9.00: irq_stat 0x40000001
[ 2675.801200] ata9.00: failed command: FLUSH CACHE EXT
[ 2675.801207] ata9.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 20
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2675.801211] ata9.00: status: { DRDY ERR }
[ 2675.801213] ata9.00: error: { ABRT }
[ 2675.804165] ata9.00: failed to enable AA (error_mask=0x1)
[ 2675.809545] ata9.00: failed to enable AA (error_mask=0x1)
[ 2675.809557] ata9.00: configured for UDMA/133 (device error ignored)
[ 2675.809562] ata9.00: device reported invalid CHS sector 0
[ 2675.810666] ata9: EH complete
[ 2675.821234] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2675.821240] ata9.00: irq_stat 0x40000001
[ 2675.821243] ata9.00: failed command: FLUSH CACHE EXT
[ 2675.821250] ata9.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 1
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2675.821254] ata9.00: status: { DRDY ERR }
[ 2675.821256] ata9.00: error: { ABRT }
[ 2675.824218] ata9.00: failed to enable AA (error_mask=0x1)
[ 2675.829570] ata9.00: failed to enable AA (error_mask=0x1)
[ 2675.829582] ata9.00: configured for UDMA/133 (device error ignored)
[ 2675.829586] ata9.00: device reported invalid CHS sector 0
[ 2675.830690] ata9: EH complete
[ 2675.841201] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2675.841219] ata9.00: irq_stat 0x40000001
[ 2675.841222] ata9.00: failed command: FLUSH CACHE EXT
[ 2675.841229] ata9.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 3
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2675.841233] ata9.00: status: { DRDY ERR }
[ 2675.841235] ata9.00: error: { ABRT }
[ 2675.844195] ata9.00: failed to enable AA (error_mask=0x1)
[ 2675.849455] ata9.00: failed to enable AA (error_mask=0x1)
[ 2675.849480] ata9.00: configured for UDMA/133 (device error ignored)
[ 2675.849484] ata9.00: device reported invalid CHS sector 0
[ 2675.850560] sd 8:0:0:0: [sdj] tag#3 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2675.850577] sd 8:0:0:0: [sdj] tag#3 Sense Key : Illegal Request [current]
[ 2675.850580] sd 8:0:0:0: [sdj] tag#3 Add. Sense: Unaligned write command
[ 2675.850584] sd 8:0:0:0: [sdj] tag#3 CDB: Synchronize Cache(10) 35 00 00 00 00 00 00 00 00 00
[ 2675.850590] blk_update_request: I/O error, dev sdj, sector 0
[ 2675.850607] ata9: EH complete
[ 2675.865167] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2675.865172] ata10.00: irq_stat 0x40000001
[ 2675.865176] ata10.00: failed command: WRITE DMA
[ 2675.865183] ata10.00: cmd ca/00:08:10:09:00/00:00:00:00:00/e0 tag 13 dma 4096 out
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2675.865186] ata10.00: status: { DRDY ERR }
[ 2675.865189] ata10.00: error: { ABRT }
[ 2675.868147] ata10.00: failed to enable AA (error_mask=0x1)
[ 2675.869142] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2675.869148] ata9.00: irq_stat 0x40000001
[ 2675.869164] ata9.00: failed command: WRITE DMA
[ 2675.869171] ata9.00: cmd ca/00:08:10:09:00/00:00:00:00:00/e0 tag 17 dma 4096 out
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2675.869174] ata9.00: status: { DRDY ERR }
[ 2675.869176] ata9.00: error: { ABRT }
[ 2675.872284] ata9.00: failed to enable AA (error_mask=0x1)
[ 2675.874039] ata10.00: failed to enable AA (error_mask=0x1)
[ 2675.874064] ata10.00: configured for UDMA/133 (device error ignored)
[ 2675.874083] sd 9:0:0:0: [sdk] tag#13 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2675.874086] sd 9:0:0:0: [sdk] tag#13 Sense Key : Illegal Request [current]
[ 2675.874089] sd 9:0:0:0: [sdk] tag#13 Add. Sense: Unaligned write command
[ 2675.874093] sd 9:0:0:0: [sdk] tag#13 CDB: Write(16) 8a 00 00 00 00 00 00 00 09 10 00 00 00 08 00 00
[ 2675.874095] blk_update_request: I/O error, dev sdk, sector 2320
[ 2675.874112] ata10: EH complete
[ 2675.878319] ata9.00: failed to enable AA (error_mask=0x1)
[ 2675.878328] ata9.00: configured for UDMA/133 (device error ignored)
[ 2675.879416] sd 8:0:0:0: [sdj] tag#17 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2675.879419] sd 8:0:0:0: [sdj] tag#17 Sense Key : Illegal Request [current]
[ 2675.879435] sd 8:0:0:0: [sdj] tag#17 Add. Sense: Unaligned write command
[ 2675.879438] sd 8:0:0:0: [sdj] tag#17 CDB: Write(16) 8a 00 00 00 00 00 00 00 09 10 00 00 00 08 00 00
[ 2675.879440] blk_update_request: I/O error, dev sdj, sector 2320
[ 2675.879451] ata9: EH complete
[ 2675.885150] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2675.885154] ata10.00: irq_stat 0x40000001
[ 2675.885170] ata10.00: failed command: WRITE DMA
[ 2675.885176] ata10.00: cmd ca/00:08:10:0b:00/00:00:00:00:00/e0 tag 17 dma 4096 out
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2675.885179] ata10.00: status: { DRDY ERR }
[ 2675.885181] ata10.00: error: { ABRT }
[ 2675.888088] ata10.00: failed to enable AA (error_mask=0x1)
[ 2675.893340] ata10.00: failed to enable AA (error_mask=0x1)
[ 2675.893362] ata10.00: configured for UDMA/133 (device error ignored)
[ 2675.893382] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2675.893387] ata9.00: irq_stat 0x40000001
[ 2675.893391] ata9.00: failed command: WRITE DMA
[ 2675.893398] ata9.00: cmd ca/00:08:10:0b:00/00:00:00:00:00/e0 tag 21 dma 4096 out
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2675.893402] ata9.00: status: { DRDY ERR }
[ 2675.893404] ata9.00: error: { ABRT }
[ 2675.894440] sd 9:0:0:0: [sdk] tag#17 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2675.894444] sd 9:0:0:0: [sdk] tag#17 Sense Key : Illegal Request [current]
[ 2675.894460] sd 9:0:0:0: [sdk] tag#17 Add. Sense: Unaligned write command
[ 2675.894464] sd 9:0:0:0: [sdk] tag#17 CDB: Write(16) 8a 00 00 00 00 00 00 00 0b 10 00 00 00 08 00 00
[ 2675.894466] blk_update_request: I/O error, dev sdk, sector 2832
[ 2675.894478] ata10: EH complete
[ 2675.896356] ata9.00: failed to enable AA (error_mask=0x1)
[ 2675.901778] ata9.00: failed to enable AA (error_mask=0x1)
[ 2675.901803] ata9.00: configured for UDMA/133 (device error ignored)
[ 2675.902913] sd 8:0:0:0: [sdj] tag#21 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2675.902917] sd 8:0:0:0: [sdj] tag#21 Sense Key : Illegal Request [current]
[ 2675.902921] sd 8:0:0:0: [sdj] tag#21 Add. Sense: Unaligned write command
[ 2675.902925] sd 8:0:0:0: [sdj] tag#21 CDB: Write(16) 8a 00 00 00 00 00 00 00 0b 10 00 00 00 08 00 00
[ 2675.902927] blk_update_request: I/O error, dev sdj, sector 2832
[ 2675.902946] ata9: EH complete
[ 2675.909151] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2675.909155] ata10.00: irq_stat 0x40000001
[ 2675.909159] ata10.00: failed command: WRITE DMA EXT
[ 2675.909178] ata10.00: cmd 35/00:08:10:5d:50/00:00:5d:01:00/e0 tag 23 dma 4096 out
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2675.909181] ata10.00: status: { DRDY ERR }
[ 2675.909184] ata10.00: error: { ABRT }
[ 2675.912088] ata10.00: failed to enable AA (error_mask=0x1)
[ 2675.917171] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2675.917177] ata9.00: irq_stat 0x40000001
[ 2675.917182] ata9.00: failed command: WRITE DMA EXT
[ 2675.917202] ata9.00: cmd 35/00:08:10:5d:50/00:00:5d:01:00/e0 tag 25 dma 4096 out
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2675.917205] ata9.00: status: { DRDY ERR }
[ 2675.917207] ata9.00: error: { ABRT }
[ 2675.917324] ata10.00: failed to enable AA (error_mask=0x1)
[ 2675.917331] ata10.00: configured for UDMA/133 (device error ignored)
[ 2675.918409] sd 9:0:0:0: [sdk] tag#23 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2675.918413] sd 9:0:0:0: [sdk] tag#23 Sense Key : Illegal Request [current]
[ 2675.918429] sd 9:0:0:0: [sdk] tag#23 Add. Sense: Unaligned write command
[ 2675.918432] sd 9:0:0:0: [sdk] tag#23 CDB: Write(16) 8a 00 00 00 00 01 5d 50 5d 10 00 00 00 08 00 00
[ 2675.918435] blk_update_request: I/O error, dev sdk, sector 5860515088
[ 2675.918449] ata10: EH complete
[ 2675.920068] ata9.00: failed to enable AA (error_mask=0x1)
[ 2675.925429] ata9.00: failed to enable AA (error_mask=0x1)
[ 2675.925454] ata9.00: configured for UDMA/133 (device error ignored)
[ 2675.926535] sd 8:0:0:0: [sdj] tag#25 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2675.926552] sd 8:0:0:0: [sdj] tag#25 Sense Key : Illegal Request [current]
[ 2675.926555] sd 8:0:0:0: [sdj] tag#25 Add. Sense: Unaligned write command
[ 2675.926559] sd 8:0:0:0: [sdj] tag#25 CDB: Write(16) 8a 00 00 00 00 01 5d 50 5d 10 00 00 00 08 00 00
[ 2675.926561] blk_update_request: I/O error, dev sdj, sector 5860515088
[ 2675.926577] ata9: EH complete
[ 2675.933235] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2675.933242] ata10.00: irq_stat 0x40000001
[ 2675.933247] ata10.00: failed command: WRITE DMA EXT
[ 2675.933255] ata10.00: cmd 35/00:08:10:5f:50/00:00:5d:01:00/e0 tag 28 dma 4096 out
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2675.933259] ata10.00: status: { DRDY ERR }
[ 2675.933262] ata10.00: error: { ABRT }
[ 2675.936126] ata10.00: failed to enable AA (error_mask=0x1)
[ 2675.937132] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2675.937148] ata9.00: irq_stat 0x40000001
[ 2675.937152] ata9.00: failed command: WRITE DMA EXT
[ 2675.937159] ata9.00: cmd 35/00:08:10:5f:50/00:00:5d:01:00/e0 tag 30 dma 4096 out
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2675.937162] ata9.00: status: { DRDY ERR }
[ 2675.937164] ata9.00: error: { ABRT }
[ 2675.940259] ata9.00: failed to enable AA (error_mask=0x1)
[ 2675.941972] ata10.00: failed to enable AA (error_mask=0x1)
[ 2675.941981] ata10.00: configured for UDMA/133 (device error ignored)
[ 2675.942011] sd 9:0:0:0: [sdk] tag#28 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2675.942014] sd 9:0:0:0: [sdk] tag#28 Sense Key : Illegal Request [current]
[ 2675.942017] sd 9:0:0:0: [sdk] tag#28 Add. Sense: Unaligned write command
[ 2675.942021] sd 9:0:0:0: [sdk] tag#28 CDB: Write(16) 8a 00 00 00 00 01 5d 50 5f 10 00 00 00 08 00 00
[ 2675.942023] blk_update_request: I/O error, dev sdk, sector 5860515600
[ 2675.942036] ata10: EH complete
[ 2675.946272] ata9.00: failed to enable AA (error_mask=0x1)
[ 2675.946298] ata9.00: configured for UDMA/133 (device error ignored)
[ 2675.947378] sd 8:0:0:0: [sdj] tag#30 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2675.947395] sd 8:0:0:0: [sdj] tag#30 Sense Key : Illegal Request [current]
[ 2675.947398] sd 8:0:0:0: [sdj] tag#30 Add. Sense: Unaligned write command
[ 2675.947401] sd 8:0:0:0: [sdj] tag#30 CDB: Write(16) 8a 00 00 00 00 01 5d 50 5f 10 00 00 00 08 00 00
[ 2675.947403] blk_update_request: I/O error, dev sdj, sector 5860515600
[ 2675.947418] ata9: EH complete
[ 2675.953133] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2675.953137] ata10.00: irq_stat 0x40000001
[ 2675.953140] ata10.00: failed command: READ DMA
[ 2675.953147] ata10.00: cmd c8/00:10:10:0a:00/00:00:00:00:00/e0 tag 2 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2675.953150] ata10.00: status: { DRDY ERR }
[ 2675.953153] ata10.00: error: { ABRT }
[ 2675.956104] ata10.00: failed to enable AA (error_mask=0x1)
[ 2675.961214] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2675.961220] ata9.00: irq_stat 0x40000001
[ 2675.961224] ata9.00: failed command: READ DMA
[ 2675.961231] ata9.00: cmd c8/00:10:10:0a:00/00:00:00:00:00/e0 tag 8 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2675.961234] ata9.00: status: { DRDY ERR }
[ 2675.961236] ata9.00: error: { ABRT }
[ 2675.961408] ata10.00: failed to enable AA (error_mask=0x1)
[ 2675.961433] ata10.00: configured for UDMA/133 (device error ignored)
[ 2675.962511] ata10: EH complete
[ 2675.964079] ata9.00: failed to enable AA (error_mask=0x1)
[ 2675.969421] ata9.00: failed to enable AA (error_mask=0x1)
[ 2675.969430] ata9.00: configured for UDMA/133 (device error ignored)
[ 2675.970515] ata9: EH complete
[ 2675.977186] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2675.977192] ata10.00: irq_stat 0x40000001
[ 2675.977195] ata10.00: failed command: READ DMA
[ 2675.977202] ata10.00: cmd c8/00:10:10:0a:00/00:00:00:00:00/e0 tag 6 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2675.977206] ata10.00: status: { DRDY ERR }
[ 2675.977208] ata10.00: error: { ABRT }
[ 2675.980041] ata10.00: failed to enable AA (error_mask=0x1)
[ 2675.981148] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2675.981151] ata9.00: irq_stat 0x40000001
[ 2675.981155] ata9.00: failed command: READ DMA
[ 2675.981162] ata9.00: cmd c8/00:10:10:0a:00/00:00:00:00:00/e0 tag 11 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2675.981165] ata9.00: status: { DRDY ERR }
[ 2675.981168] ata9.00: error: { ABRT }
[ 2675.984139] ata9.00: failed to enable AA (error_mask=0x1)
[ 2675.985950] ata10.00: failed to enable AA (error_mask=0x1)
[ 2675.985975] ata10.00: configured for UDMA/133 (device error ignored)
[ 2675.985991] ata10: EH complete
[ 2675.990206] ata9.00: failed to enable AA (error_mask=0x1)
[ 2675.990231] ata9.00: configured for UDMA/133 (device error ignored)
[ 2675.991308] ata9: EH complete
[ 2675.997230] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2675.997248] ata10.00: irq_stat 0x40000001
[ 2675.997252] ata10.00: failed command: READ DMA
[ 2675.997259] ata10.00: cmd c8/00:10:10:0a:00/00:00:00:00:00/e0 tag 8 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2675.997262] ata10.00: status: { DRDY ERR }
[ 2675.997265] ata10.00: error: { ABRT }
[ 2676.000116] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.005155] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.005159] ata9.00: irq_stat 0x40000001
[ 2676.005162] ata9.00: failed command: READ DMA
[ 2676.005183] ata9.00: cmd c8/00:10:10:0a:00/00:00:00:00:00/e0 tag 17 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.005186] ata9.00: status: { DRDY ERR }
[ 2676.005188] ata9.00: error: { ABRT }
[ 2676.005315] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.005321] ata10.00: configured for UDMA/133 (device error ignored)
[ 2676.006395] ata10: EH complete
[ 2676.008079] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.013503] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.013516] ata9.00: configured for UDMA/133 (device error ignored)
[ 2676.014596] ata9: EH complete
[ 2676.021206] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.021224] ata10.00: irq_stat 0x40000001
[ 2676.021229] ata10.00: failed command: READ DMA
[ 2676.021236] ata10.00: cmd c8/00:10:10:0a:00/00:00:00:00:00/e0 tag 14 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.021239] ata10.00: status: { DRDY ERR }
[ 2676.021242] ata10.00: error: { ABRT }
[ 2676.024102] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.025205] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.025212] ata9.00: irq_stat 0x40000001
[ 2676.025216] ata9.00: failed command: READ DMA
[ 2676.025225] ata9.00: cmd c8/00:10:10:0a:00/00:00:00:00:00/e0 tag 21 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.025229] ata9.00: status: { DRDY ERR }
[ 2676.025231] ata9.00: error: { ABRT }
[ 2676.028288] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.030007] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.030015] ata10.00: configured for UDMA/133 (device error ignored)
[ 2676.030042] ata10: EH complete
[ 2676.034497] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.034510] ata9.00: configured for UDMA/133 (device error ignored)
[ 2676.035621] ata9: EH complete
[ 2676.041187] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.041193] ata10.00: irq_stat 0x40000001
[ 2676.041196] ata10.00: failed command: READ DMA
[ 2676.041203] ata10.00: cmd c8/00:10:10:0a:00/00:00:00:00:00/e0 tag 18 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.041207] ata10.00: status: { DRDY ERR }
[ 2676.041209] ata10.00: error: { ABRT }
[ 2676.044205] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.049160] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.049167] ata9.00: irq_stat 0x40000001
[ 2676.049172] ata9.00: failed command: READ DMA
[ 2676.049180] ata9.00: cmd c8/00:10:10:0a:00/00:00:00:00:00/e0 tag 27 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.049184] ata9.00: status: { DRDY ERR }
[ 2676.049186] ata9.00: error: { ABRT }
[ 2676.049686] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.049697] ata10.00: configured for UDMA/133 (device error ignored)
[ 2676.050806] ata10: EH complete
[ 2676.052144] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.057570] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.057594] ata9.00: configured for UDMA/133 (device error ignored)
[ 2676.058674] ata9: EH complete
[ 2676.065162] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.065168] ata10.00: irq_stat 0x40000001
[ 2676.065172] ata10.00: failed command: READ DMA
[ 2676.065179] ata10.00: cmd c8/00:10:10:0a:00/00:00:00:00:00/e0 tag 24 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.065182] ata10.00: status: { DRDY ERR }
[ 2676.065184] ata10.00: error: { ABRT }
[ 2676.068176] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.069213] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.069219] ata9.00: irq_stat 0x40000001
[ 2676.069224] ata9.00: failed command: READ DMA
[ 2676.069232] ata9.00: cmd c8/00:10:10:0a:00/00:00:00:00:00/e0 tag 0 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.069236] ata9.00: status: { DRDY ERR }
[ 2676.069238] ata9.00: error: { ABRT }
[ 2676.072360] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.074255] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.074266] ata10.00: configured for UDMA/133 (device error ignored)
[ 2676.074286] sd 9:0:0:0: [sdk] tag#24 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2676.074289] sd 9:0:0:0: [sdk] tag#24 Sense Key : Illegal Request [current]
[ 2676.074292] sd 9:0:0:0: [sdk] tag#24 Add. Sense: Unaligned write command
[ 2676.074296] sd 9:0:0:0: [sdk] tag#24 CDB: Read(16) 88 00 00 00 00 00 00 00 0a 10 00 00 00 10 00 00
[ 2676.074298] blk_update_request: I/O error, dev sdk, sector 2576
[ 2676.074315] ata10: EH complete
[ 2676.078482] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.078496] ata9.00: configured for UDMA/133 (device error ignored)
[ 2676.079620] ata9: EH complete
[ 2676.085193] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.085198] ata10.00: irq_stat 0x40000001
[ 2676.085202] ata10.00: failed command: READ DMA EXT
[ 2676.085208] ata10.00: cmd 25/00:10:10:5c:50/00:00:5d:01:00/e0 tag 30 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.085212] ata10.00: status: { DRDY ERR }
[ 2676.085214] ata10.00: error: { ABRT }
[ 2676.088181] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.093166] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.093183] ata9.00: irq_stat 0x40000001
[ 2676.093187] ata9.00: failed command: READ DMA EXT
[ 2676.093194] ata9.00: cmd 25/00:10:10:5c:50/00:00:5d:01:00/e0 tag 7 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.093198] ata9.00: status: { DRDY ERR }
[ 2676.093200] ata9.00: error: { ABRT }
[ 2676.093387] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.093395] ata10.00: configured for UDMA/133 (device error ignored)
[ 2676.094485] ata10: EH complete
[ 2676.096111] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.101432] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.101444] ata9.00: configured for UDMA/133 (device error ignored)
[ 2676.102526] ata9: EH complete
[ 2676.113114] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.113133] ata10.00: irq_stat 0x40000001
[ 2676.113137] ata10.00: failed command: READ DMA EXT
[ 2676.113144] ata10.00: cmd 25/00:10:10:5c:50/00:00:5d:01:00/e0 tag 2 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.113148] ata10.00: status: { DRDY ERR }
[ 2676.113150] ata10.00: error: { ABRT }
[ 2676.113166] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.113169] ata9.00: irq_stat 0x40000001
[ 2676.113173] ata9.00: failed command: READ DMA EXT
[ 2676.113180] ata9.00: cmd 25/00:10:10:5c:50/00:00:5d:01:00/e0 tag 9 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.113183] ata9.00: status: { DRDY ERR }
[ 2676.113199] ata9.00: error: { ABRT }
[ 2676.117165] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.117250] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.124679] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.124687] ata9.00: configured for UDMA/133 (device error ignored)
[ 2676.124751] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.124775] ata10.00: configured for UDMA/133 (device error ignored)
[ 2676.125776] ata9: EH complete
[ 2676.125873] ata10: EH complete
[ 2676.141139] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.141144] ata10.00: irq_stat 0x40000001
[ 2676.141147] ata10.00: failed command: READ DMA EXT
[ 2676.141154] ata10.00: cmd 25/00:10:10:5c:50/00:00:5d:01:00/e0 tag 8 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.141157] ata10.00: status: { DRDY ERR }
[ 2676.141159] ata10.00: error: { ABRT }
[ 2676.141178] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.141185] ata9.00: irq_stat 0x40000001
[ 2676.141190] ata9.00: failed command: READ DMA EXT
[ 2676.141200] ata9.00: cmd 25/00:10:10:5c:50/00:00:5d:01:00/e0 tag 13 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.141218] ata9.00: status: { DRDY ERR }
[ 2676.141222] ata9.00: error: { ABRT }
[ 2676.145214] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.145245] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.152634] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.152644] ata9.00: configured for UDMA/133 (device error ignored)
[ 2676.152668] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.152677] ata10.00: configured for UDMA/133 (device error ignored)
[ 2676.153732] ata9: EH complete
[ 2676.153765] ata10: EH complete
[ 2676.169171] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.169188] ata10.00: irq_stat 0x40000001
[ 2676.169192] ata10.00: failed command: READ DMA EXT
[ 2676.169198] ata10.00: cmd 25/00:10:10:5c:50/00:00:5d:01:00/e0 tag 12 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.169201] ata10.00: status: { DRDY ERR }
[ 2676.169203] ata10.00: error: { ABRT }
[ 2676.169287] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.169293] ata9.00: irq_stat 0x40000001
[ 2676.169298] ata9.00: failed command: READ DMA EXT
[ 2676.169306] ata9.00: cmd 25/00:10:10:5c:50/00:00:5d:01:00/e0 tag 19 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.169310] ata9.00: status: { DRDY ERR }
[ 2676.169326] ata9.00: error: { ABRT }
[ 2676.173258] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.173300] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.180792] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.180801] ata10.00: configured for UDMA/133 (device error ignored)
[ 2676.180834] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.180845] ata9.00: configured for UDMA/133 (device error ignored)
[ 2676.181890] ata10: EH complete
[ 2676.181930] ata9: EH complete
[ 2676.197163] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.197181] ata9.00: irq_stat 0x40000001
[ 2676.197185] ata9.00: failed command: READ DMA EXT
[ 2676.197192] ata9.00: cmd 25/00:10:10:5c:50/00:00:5d:01:00/e0 tag 23 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.197196] ata9.00: status: { DRDY ERR }
[ 2676.197198] ata9.00: error: { ABRT }
[ 2676.197215] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.197220] ata10.00: irq_stat 0x40000001
[ 2676.197224] ata10.00: failed command: READ DMA EXT
[ 2676.197244] ata10.00: cmd 25/00:10:10:5c:50/00:00:5d:01:00/e0 tag 16 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.197248] ata10.00: status: { DRDY ERR }
[ 2676.197251] ata10.00: error: { ABRT }
[ 2676.201301] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.201350] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.208826] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.208839] ata9.00: configured for UDMA/133 (device error ignored)
[ 2676.208880] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.208892] ata10.00: configured for UDMA/133 (device error ignored)
[ 2676.209918] ata9: EH complete
[ 2676.209991] ata10: EH complete
[ 2676.225210] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.225216] ata9.00: irq_stat 0x40000001
[ 2676.225220] ata9.00: failed command: READ DMA EXT
[ 2676.225227] ata9.00: cmd 25/00:10:10:5c:50/00:00:5d:01:00/e0 tag 27 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.225231] ata9.00: status: { DRDY ERR }
[ 2676.225233] ata9.00: error: { ABRT }
[ 2676.225250] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.225256] ata10.00: irq_stat 0x40000001
[ 2676.225259] ata10.00: failed command: READ DMA EXT
[ 2676.225266] ata10.00: cmd 25/00:10:10:5c:50/00:00:5d:01:00/e0 tag 20 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.225270] ata10.00: status: { DRDY ERR }
[ 2676.225272] ata10.00: error: { ABRT }
[ 2676.229301] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.229353] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.236843] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.236856] ata9.00: configured for UDMA/133 (device error ignored)
[ 2676.236901] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.236912] ata10.00: configured for UDMA/133 (device error ignored)
[ 2676.237964] ata9: EH complete
[ 2676.238041] ata10: EH complete
[ 2676.253155] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.253173] ata9.00: irq_stat 0x40000001
[ 2676.253176] ata9.00: failed command: READ DMA EXT
[ 2676.253182] ata9.00: cmd 25/00:10:10:5e:50/00:00:5d:01:00/e0 tag 2 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.253185] ata9.00: status: { DRDY ERR }
[ 2676.253187] ata9.00: error: { ABRT }
[ 2676.253206] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.253210] ata10.00: irq_stat 0x40000001
[ 2676.253214] ata10.00: failed command: READ DMA EXT
[ 2676.253220] ata10.00: cmd 25/00:10:10:5e:50/00:00:5d:01:00/e0 tag 26 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.253223] ata10.00: status: { DRDY ERR }
[ 2676.253225] ata10.00: error: { ABRT }
[ 2676.257254] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.257306] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.264747] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.264758] ata9.00: configured for UDMA/133 (device error ignored)
[ 2676.264786] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.264796] ata10.00: configured for UDMA/133 (device error ignored)
[ 2676.265846] ata9: EH complete
[ 2676.265900] ata10: EH complete
[ 2676.285157] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.285163] ata9.00: irq_stat 0x40000001
[ 2676.285179] ata9.00: failed command: READ DMA EXT
[ 2676.285185] ata9.00: cmd 25/00:10:10:5e:50/00:00:5d:01:00/e0 tag 10 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.285188] ata9.00: status: { DRDY ERR }
[ 2676.285190] ata9.00: error: { ABRT }
[ 2676.285206] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.285211] ata10.00: irq_stat 0x40000001
[ 2676.285214] ata10.00: failed command: READ DMA EXT
[ 2676.285220] ata10.00: cmd 25/00:10:10:5e:50/00:00:5d:01:00/e0 tag 29 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.285223] ata10.00: status: { DRDY ERR }
[ 2676.285225] ata10.00: error: { ABRT }
[ 2676.289327] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.289376] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.296922] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.296948] ata9.00: configured for UDMA/133 (device error ignored)
[ 2676.297056] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.297068] ata10.00: configured for UDMA/133 (device error ignored)
[ 2676.298025] ata9: EH complete
[ 2676.298175] ata10: EH complete
[ 2676.309215] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.309220] ata9.00: irq_stat 0x40000001
[ 2676.309224] ata9.00: failed command: READ DMA EXT
[ 2676.309231] ata9.00: cmd 25/00:10:10:5e:50/00:00:5d:01:00/e0 tag 13 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.309234] ata9.00: status: { DRDY ERR }
[ 2676.309237] ata9.00: error: { ABRT }
[ 2676.312169] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.313162] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.313180] ata10.00: irq_stat 0x40000001
[ 2676.313184] ata10.00: failed command: READ DMA EXT
[ 2676.313192] ata10.00: cmd 25/00:10:10:5e:50/00:00:5d:01:00/e0 tag 1 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.313195] ata10.00: status: { DRDY ERR }
[ 2676.313198] ata10.00: error: { ABRT }
[ 2676.316380] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.318205] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.318216] ata9.00: configured for UDMA/133 (device error ignored)
[ 2676.318233] ata9: EH complete
[ 2676.322367] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.322391] ata10.00: configured for UDMA/133 (device error ignored)
[ 2676.323487] ata10: EH complete
[ 2676.333203] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.333208] ata9.00: irq_stat 0x40000001
[ 2676.333212] ata9.00: failed command: READ DMA EXT
[ 2676.333219] ata9.00: cmd 25/00:10:10:5e:50/00:00:5d:01:00/e0 tag 25 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.333223] ata9.00: status: { DRDY ERR }
[ 2676.333225] ata9.00: error: { ABRT }
[ 2676.336162] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.341194] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.341199] ata10.00: irq_stat 0x40000001
[ 2676.341203] ata10.00: failed command: READ DMA EXT
[ 2676.341209] ata10.00: cmd 25/00:10:10:5e:50/00:00:5d:01:00/e0 tag 13 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.341212] ata10.00: status: { DRDY ERR }
[ 2676.341215] ata10.00: error: { ABRT }
[ 2676.341365] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.341375] ata9.00: configured for UDMA/133 (device error ignored)
[ 2676.342461] ata9: EH complete
[ 2676.344080] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.349322] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.349330] ata10.00: configured for UDMA/133 (device error ignored)
[ 2676.350414] ata10: EH complete
[ 2676.357179] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.357184] ata9.00: irq_stat 0x40000001
[ 2676.357188] ata9.00: failed command: READ DMA EXT
[ 2676.357195] ata9.00: cmd 25/00:10:10:5e:50/00:00:5d:01:00/e0 tag 27 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.357198] ata9.00: status: { DRDY ERR }
[ 2676.357200] ata9.00: error: { ABRT }
[ 2676.360038] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.361133] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.361136] ata10.00: irq_stat 0x40000001
[ 2676.361140] ata10.00: failed command: READ DMA EXT
[ 2676.361160] ata10.00: cmd 25/00:10:10:5e:50/00:00:5d:01:00/e0 tag 16 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.361164] ata10.00: status: { DRDY ERR }
[ 2676.361166] ata10.00: error: { ABRT }
[ 2676.364116] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.365867] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.365874] ata9.00: configured for UDMA/133 (device error ignored)
[ 2676.365899] ata9: EH complete
[ 2676.370062] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.370070] ata10.00: configured for UDMA/133 (device error ignored)
[ 2676.371153] ata10: EH complete
[ 2676.377167] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.377173] ata9.00: irq_stat 0x40000001
[ 2676.377178] ata9.00: failed command: READ DMA EXT
[ 2676.377187] ata9.00: cmd 25/00:10:10:5e:50/00:00:5d:01:00/e0 tag 8 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.377191] ata9.00: status: { DRDY ERR }
[ 2676.377193] ata9.00: error: { ABRT }
[ 2676.380023] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.385168] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.385171] ata10.00: irq_stat 0x40000001
[ 2676.385175] ata10.00: failed command: READ DMA EXT
[ 2676.385183] ata10.00: cmd 25/00:10:10:5e:50/00:00:5d:01:00/e0 tag 28 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.385186] ata10.00: status: { DRDY ERR }
[ 2676.385189] ata10.00: error: { ABRT }
[ 2676.385205] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.385219] ata9.00: configured for UDMA/133 (device error ignored)
[ 2676.386344] ata9: EH complete
[ 2676.388045] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.393249] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.393258] ata10.00: configured for UDMA/133 (device error ignored)
[ 2676.394380] ata10: EH complete
[ 2676.409153] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.409158] ata9.00: irq_stat 0x40000001
[ 2676.409162] ata9.00: failed command: READ DMA
[ 2676.409169] ata9.00: cmd c8/00:10:10:0a:00/00:00:00:00:00/e0 tag 13 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.409173] ata9.00: status: { DRDY ERR }
[ 2676.409175] ata9.00: error: { ABRT }
[ 2676.412049] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.417270] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.417281] ata9.00: configured for UDMA/133 (device error ignored)
[ 2676.418373] ata9: EH complete
[ 2676.429121] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.429126] ata9.00: irq_stat 0x40000001
[ 2676.429130] ata9.00: failed command: READ DMA
[ 2676.429136] ata9.00: cmd c8/00:10:10:0a:00/00:00:00:00:00/e0 tag 15 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.429139] ata9.00: status: { DRDY ERR }
[ 2676.429141] ata9.00: error: { ABRT }
[ 2676.431980] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.437174] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.437183] ata9.00: configured for UDMA/133 (device error ignored)
[ 2676.438274] ata9: EH complete
[ 2676.449190] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.449196] ata9.00: irq_stat 0x40000001
[ 2676.449200] ata9.00: failed command: READ DMA
[ 2676.449208] ata9.00: cmd c8/00:10:10:0a:00/00:00:00:00:00/e0 tag 19 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.449212] ata9.00: status: { DRDY ERR }
[ 2676.449214] ata9.00: error: { ABRT }
[ 2676.452028] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.457198] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.457206] ata9.00: configured for UDMA/133 (device error ignored)
[ 2676.458293] ata9: EH complete
[ 2676.469152] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.469157] ata9.00: irq_stat 0x40000001
[ 2676.469161] ata9.00: failed command: READ DMA
[ 2676.469167] ata9.00: cmd c8/00:10:10:0a:00/00:00:00:00:00/e0 tag 23 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.469170] ata9.00: status: { DRDY ERR }
[ 2676.469172] ata9.00: error: { ABRT }
[ 2676.472028] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.477208] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.477215] ata9.00: configured for UDMA/133 (device error ignored)
[ 2676.478300] ata9: EH complete
[ 2676.489168] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.489174] ata9.00: irq_stat 0x40000001
[ 2676.489178] ata9.00: failed command: READ DMA
[ 2676.489186] ata9.00: cmd c8/00:10:10:0a:00/00:00:00:00:00/e0 tag 27 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.489189] ata9.00: status: { DRDY ERR }
[ 2676.489192] ata9.00: error: { ABRT }
[ 2676.492050] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.497213] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.497220] ata9.00: configured for UDMA/133 (device error ignored)
[ 2676.498291] ata9: EH complete
[ 2676.509186] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.509192] ata9.00: irq_stat 0x40000001
[ 2676.509195] ata9.00: failed command: READ DMA
[ 2676.509203] ata9.00: cmd c8/00:10:10:0a:00/00:00:00:00:00/e0 tag 0 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.509206] ata9.00: status: { DRDY ERR }
[ 2676.509209] ata9.00: error: { ABRT }
[ 2676.512066] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.517354] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.517379] ata9.00: configured for UDMA/133 (device error ignored)
[ 2676.518484] ata9: EH complete
[ 2676.529220] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.529226] ata9.00: irq_stat 0x40000001
[ 2676.529230] ata9.00: failed command: READ DMA EXT
[ 2676.529238] ata9.00: cmd 25/00:10:10:5c:50/00:00:5d:01:00/e0 tag 6 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.529242] ata9.00: status: { DRDY ERR }
[ 2676.529244] ata9.00: error: { ABRT }
[ 2676.532115] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.537343] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.537368] ata9.00: configured for UDMA/133 (device error ignored)
[ 2676.538460] ata9: EH complete
[ 2676.549182] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.549190] ata9.00: irq_stat 0x40000001
[ 2676.549196] ata9.00: failed command: READ DMA EXT
[ 2676.549208] ata9.00: cmd 25/00:10:10:5c:50/00:00:5d:01:00/e0 tag 9 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.549214] ata9.00: status: { DRDY ERR }
[ 2676.549218] ata9.00: error: { ABRT }
[ 2676.552084] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.557396] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.557426] ata9.00: configured for UDMA/133 (device error ignored)
[ 2676.558523] ata9: EH complete
[ 2676.569184] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.569189] ata9.00: irq_stat 0x40000001
[ 2676.569193] ata9.00: failed command: READ DMA EXT
[ 2676.569200] ata9.00: cmd 25/00:10:10:5c:50/00:00:5d:01:00/e0 tag 15 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.569203] ata9.00: status: { DRDY ERR }
[ 2676.569206] ata9.00: error: { ABRT }
[ 2676.572076] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.577328] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.577351] ata9.00: configured for UDMA/133 (device error ignored)
[ 2676.578428] ata9: EH complete
[ 2676.589190] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.589196] ata9.00: irq_stat 0x40000001
[ 2676.589200] ata9.00: failed command: READ DMA EXT
[ 2676.589208] ata9.00: cmd 25/00:10:10:5c:50/00:00:5d:01:00/e0 tag 19 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.589212] ata9.00: status: { DRDY ERR }
[ 2676.589214] ata9.00: error: { ABRT }
[ 2676.592080] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.597330] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.597342] ata9.00: configured for UDMA/133 (device error ignored)
[ 2676.598432] ata9: EH complete
[ 2676.609219] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.609224] ata9.00: irq_stat 0x40000001
[ 2676.609228] ata9.00: failed command: READ DMA EXT
[ 2676.609235] ata9.00: cmd 25/00:10:10:5c:50/00:00:5d:01:00/e0 tag 23 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.609239] ata9.00: status: { DRDY ERR }
[ 2676.609241] ata9.00: error: { ABRT }
[ 2676.612106] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.617335] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.617360] ata9.00: configured for UDMA/133 (device error ignored)
[ 2676.618438] ata9: EH complete
[ 2676.629177] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.629182] ata9.00: irq_stat 0x40000001
[ 2676.629187] ata9.00: failed command: READ DMA EXT
[ 2676.629195] ata9.00: cmd 25/00:10:10:5c:50/00:00:5d:01:00/e0 tag 27 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.629198] ata9.00: status: { DRDY ERR }
[ 2676.629200] ata9.00: error: { ABRT }
[ 2676.632143] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.637437] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.637462] ata9.00: configured for UDMA/133 (device error ignored)
[ 2676.638568] ata9: EH complete
[ 2676.649154] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.649160] ata9.00: irq_stat 0x40000001
[ 2676.649163] ata9.00: failed command: READ DMA EXT
[ 2676.649170] ata9.00: cmd 25/00:10:10:5e:50/00:00:5d:01:00/e0 tag 1 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.649173] ata9.00: status: { DRDY ERR }
[ 2676.649176] ata9.00: error: { ABRT }
[ 2676.652103] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.657394] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.657405] ata9.00: configured for UDMA/133 (device error ignored)
[ 2676.658480] ata9: EH complete
[ 2676.669188] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.669193] ata9.00: irq_stat 0x40000001
[ 2676.669196] ata9.00: failed command: READ DMA EXT
[ 2676.669203] ata9.00: cmd 25/00:10:10:5e:50/00:00:5d:01:00/e0 tag 3 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.669206] ata9.00: status: { DRDY ERR }
[ 2676.669208] ata9.00: error: { ABRT }
[ 2676.672152] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.677456] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.677481] ata9.00: configured for UDMA/133 (device error ignored)
[ 2676.678571] ata9: EH complete
[ 2676.689166] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.689172] ata9.00: irq_stat 0x40000001
[ 2676.689176] ata9.00: failed command: READ DMA EXT
[ 2676.689185] ata9.00: cmd 25/00:10:10:5e:50/00:00:5d:01:00/e0 tag 5 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.689188] ata9.00: status: { DRDY ERR }
[ 2676.689191] ata9.00: error: { ABRT }
[ 2676.692064] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.697292] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.697303] ata9.00: configured for UDMA/133 (device error ignored)
[ 2676.698382] ata9: EH complete
[ 2676.709165] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.709171] ata9.00: irq_stat 0x40000001
[ 2676.709187] ata9.00: failed command: READ DMA EXT
[ 2676.709194] ata9.00: cmd 25/00:10:10:5e:50/00:00:5d:01:00/e0 tag 7 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.709197] ata9.00: status: { DRDY ERR }
[ 2676.709199] ata9.00: error: { ABRT }
[ 2676.712144] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.717455] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.717480] ata9.00: configured for UDMA/133 (device error ignored)
[ 2676.718557] ata9: EH complete
[ 2676.729202] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.729207] ata9.00: irq_stat 0x40000001
[ 2676.729211] ata9.00: failed command: READ DMA EXT
[ 2676.729217] ata9.00: cmd 25/00:10:10:5e:50/00:00:5d:01:00/e0 tag 19 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.729220] ata9.00: status: { DRDY ERR }
[ 2676.729222] ata9.00: error: { ABRT }
[ 2676.732170] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.737464] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.737489] ata9.00: configured for UDMA/133 (device error ignored)
[ 2676.738581] ata9: EH complete
[ 2676.749208] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.749213] ata9.00: irq_stat 0x40000001
[ 2676.749217] ata9.00: failed command: READ DMA EXT
[ 2676.749224] ata9.00: cmd 25/00:10:10:5e:50/00:00:5d:01:00/e0 tag 21 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.749227] ata9.00: status: { DRDY ERR }
[ 2676.749229] ata9.00: error: { ABRT }
[ 2676.752188] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.757478] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.757503] ata9.00: configured for UDMA/133 (device error ignored)
[ 2676.758608] ata9: EH complete
[ 2676.773149] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.773154] ata10.00: irq_stat 0x40000001
[ 2676.773158] ata10.00: failed command: READ DMA
[ 2676.773165] ata10.00: cmd c8/00:10:10:0a:00/00:00:00:00:00/e0 tag 23 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.773168] ata10.00: status: { DRDY ERR }
[ 2676.773171] ata10.00: error: { ABRT }
[ 2676.776168] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.781409] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.781421] ata10.00: configured for UDMA/133 (device error ignored)
[ 2676.782529] ata10: EH complete
[ 2676.797175] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.797180] ata10.00: irq_stat 0x40000001
[ 2676.797184] ata10.00: failed command: READ DMA
[ 2676.797190] ata10.00: cmd c8/00:10:10:0a:00/00:00:00:00:00/e0 tag 25 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.797193] ata10.00: status: { DRDY ERR }
[ 2676.797195] ata10.00: error: { ABRT }
[ 2676.800147] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.805537] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.805548] ata10.00: configured for UDMA/133 (device error ignored)
[ 2676.806656] ata10: EH complete
[ 2676.817192] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.817198] ata10.00: irq_stat 0x40000001
[ 2676.817202] ata10.00: failed command: READ DMA
[ 2676.817209] ata10.00: cmd c8/00:10:10:0a:00/00:00:00:00:00/e0 tag 29 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.817212] ata10.00: status: { DRDY ERR }
[ 2676.817214] ata10.00: error: { ABRT }
[ 2676.820174] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.825546] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.825557] ata10.00: configured for UDMA/133 (device error ignored)
[ 2676.826663] ata10: EH complete
[ 2676.837180] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.837185] ata10.00: irq_stat 0x40000001
[ 2676.837188] ata10.00: failed command: READ DMA
[ 2676.837195] ata10.00: cmd c8/00:10:10:0a:00/00:00:00:00:00/e0 tag 2 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.837198] ata10.00: status: { DRDY ERR }
[ 2676.837200] ata10.00: error: { ABRT }
[ 2676.840157] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.845532] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.845543] ata10.00: configured for UDMA/133 (device error ignored)
[ 2676.846649] ata10: EH complete
[ 2676.857196] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.857202] ata10.00: irq_stat 0x40000001
[ 2676.857205] ata10.00: failed command: READ DMA
[ 2676.857212] ata10.00: cmd c8/00:10:10:0a:00/00:00:00:00:00/e0 tag 4 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.857215] ata10.00: status: { DRDY ERR }
[ 2676.857218] ata10.00: error: { ABRT }
[ 2676.860182] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.865579] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.865591] ata10.00: configured for UDMA/133 (device error ignored)
[ 2676.866700] ata10: EH complete
[ 2676.877193] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.877210] ata10.00: irq_stat 0x40000001
[ 2676.877214] ata10.00: failed command: READ DMA
[ 2676.877220] ata10.00: cmd c8/00:10:10:0a:00/00:00:00:00:00/e0 tag 8 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.877223] ata10.00: status: { DRDY ERR }
[ 2676.877225] ata10.00: error: { ABRT }
[ 2676.880188] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.885569] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.885580] ata10.00: configured for UDMA/133 (device error ignored)
[ 2676.886699] ata10: EH complete
[ 2676.897194] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.897199] ata10.00: irq_stat 0x40000001
[ 2676.897203] ata10.00: failed command: READ DMA EXT
[ 2676.897210] ata10.00: cmd 25/00:10:10:5c:50/00:00:5d:01:00/e0 tag 12 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.897213] ata10.00: status: { DRDY ERR }
[ 2676.897216] ata10.00: error: { ABRT }
[ 2676.900192] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.905621] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.905645] ata10.00: configured for UDMA/133 (device error ignored)
[ 2676.906723] ata10: EH complete
[ 2676.917163] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.917170] ata10.00: irq_stat 0x40000001
[ 2676.917177] ata10.00: failed command: READ DMA EXT
[ 2676.917187] ata10.00: cmd 25/00:10:10:5c:50/00:00:5d:01:00/e0 tag 15 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.917193] ata10.00: status: { DRDY ERR }
[ 2676.917196] ata10.00: error: { ABRT }
[ 2676.920202] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.925611] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.925621] ata10.00: configured for UDMA/133 (device error ignored)
[ 2676.926697] ata10: EH complete
[ 2676.937180] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.937185] ata10.00: irq_stat 0x40000001
[ 2676.937189] ata10.00: failed command: READ DMA EXT
[ 2676.937195] ata10.00: cmd 25/00:10:10:5c:50/00:00:5d:01:00/e0 tag 21 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.937198] ata10.00: status: { DRDY ERR }
[ 2676.937200] ata10.00: error: { ABRT }
[ 2676.940134] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.945514] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.945538] ata10.00: configured for UDMA/133 (device error ignored)
[ 2676.946615] ata10: EH complete
[ 2676.957225] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.957230] ata10.00: irq_stat 0x40000001
[ 2676.957233] ata10.00: failed command: READ DMA EXT
[ 2676.957239] ata10.00: cmd 25/00:10:10:5c:50/00:00:5d:01:00/e0 tag 25 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.957242] ata10.00: status: { DRDY ERR }
[ 2676.957244] ata10.00: error: { ABRT }
[ 2676.960213] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.965612] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.965624] ata10.00: configured for UDMA/133 (device error ignored)
[ 2676.966733] ata10: EH complete
[ 2676.977184] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.977189] ata10.00: irq_stat 0x40000001
[ 2676.977193] ata10.00: failed command: READ DMA EXT
[ 2676.977200] ata10.00: cmd 25/00:10:10:5c:50/00:00:5d:01:00/e0 tag 29 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.977204] ata10.00: status: { DRDY ERR }
[ 2676.977206] ata10.00: error: { ABRT }
[ 2676.980209] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.985612] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.985623] ata10.00: configured for UDMA/133 (device error ignored)
[ 2676.986729] ata10: EH complete
[ 2676.997172] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.997177] ata10.00: irq_stat 0x40000001
[ 2676.997181] ata10.00: failed command: READ DMA EXT
[ 2676.997188] ata10.00: cmd 25/00:10:10:5c:50/00:00:5d:01:00/e0 tag 2 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.997191] ata10.00: status: { DRDY ERR }
[ 2676.997193] ata10.00: error: { ABRT }
[ 2677.000203] ata10.00: failed to enable AA (error_mask=0x1)
[ 2677.005609] ata10.00: failed to enable AA (error_mask=0x1)
[ 2677.005620] ata10.00: configured for UDMA/133 (device error ignored)
[ 2677.006739] ata10: EH complete
[ 2677.017203] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2677.017208] ata10.00: irq_stat 0x40000001
[ 2677.017212] ata10.00: failed command: READ DMA EXT
[ 2677.017219] ata10.00: cmd 25/00:10:10:5e:50/00:00:5d:01:00/e0 tag 8 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2677.017222] ata10.00: status: { DRDY ERR }
[ 2677.017224] ata10.00: error: { ABRT }
[ 2677.020145] ata10.00: failed to enable AA (error_mask=0x1)
[ 2677.025364] ata10.00: failed to enable AA (error_mask=0x1)
[ 2677.025388] ata10.00: configured for UDMA/133 (device error ignored)
[ 2677.026491] ata10: EH complete
[ 2677.037161] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2677.037166] ata10.00: irq_stat 0x40000001
[ 2677.037170] ata10.00: failed command: READ DMA EXT
[ 2677.037177] ata10.00: cmd 25/00:10:10:5e:50/00:00:5d:01:00/e0 tag 14 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2677.037180] ata10.00: status: { DRDY ERR }
[ 2677.037182] ata10.00: error: { ABRT }
[ 2677.040088] ata10.00: failed to enable AA (error_mask=0x1)
[ 2677.045279] ata10.00: failed to enable AA (error_mask=0x1)
[ 2677.045301] ata10.00: configured for UDMA/133 (device error ignored)
[ 2677.046381] ata10: EH complete
[ 2677.057176] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2677.057182] ata10.00: irq_stat 0x40000001
[ 2677.057186] ata10.00: failed command: READ DMA EXT
[ 2677.057194] ata10.00: cmd 25/00:10:10:5e:50/00:00:5d:01:00/e0 tag 16 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2677.057198] ata10.00: status: { DRDY ERR }
[ 2677.057200] ata10.00: error: { ABRT }
[ 2677.060145] ata10.00: failed to enable AA (error_mask=0x1)
[ 2677.065449] ata10.00: failed to enable AA (error_mask=0x1)
[ 2677.065461] ata10.00: configured for UDMA/133 (device error ignored)
[ 2677.066550] ata10: EH complete
[ 2677.077129] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2677.077145] ata10.00: irq_stat 0x40000001
[ 2677.077149] ata10.00: failed command: READ DMA EXT
[ 2677.077157] ata10.00: cmd 25/00:10:10:5e:50/00:00:5d:01:00/e0 tag 28 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2677.077160] ata10.00: status: { DRDY ERR }
[ 2677.077163] ata10.00: error: { ABRT }
[ 2677.079994] ata10.00: failed to enable AA (error_mask=0x1)
[ 2677.085288] ata10.00: failed to enable AA (error_mask=0x1)
[ 2677.085300] ata10.00: configured for UDMA/133 (device error ignored)
[ 2677.086408] ata10: EH complete
[ 2677.097171] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2677.097176] ata10.00: irq_stat 0x40000001
[ 2677.097181] ata10.00: failed command: READ DMA EXT
[ 2677.097188] ata10.00: cmd 25/00:10:10:5e:50/00:00:5d:01:00/e0 tag 30 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2677.097192] ata10.00: status: { DRDY ERR }
[ 2677.097194] ata10.00: error: { ABRT }
[ 2677.100172] ata10.00: failed to enable AA (error_mask=0x1)
[ 2677.105558] ata10.00: failed to enable AA (error_mask=0x1)
[ 2677.105570] ata10.00: configured for UDMA/133 (device error ignored)
[ 2677.106679] ata10: EH complete
[ 2677.117245] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2677.117251] ata10.00: irq_stat 0x40000001
[ 2677.117255] ata10.00: failed command: READ DMA EXT
[ 2677.117262] ata10.00: cmd 25/00:10:10:5e:50/00:00:5d:01:00/e0 tag 1 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2677.117266] ata10.00: status: { DRDY ERR }
[ 2677.117268] ata10.00: error: { ABRT }
[ 2677.120228] ata10.00: failed to enable AA (error_mask=0x1)
[ 2677.125622] ata10.00: failed to enable AA (error_mask=0x1)
[ 2677.125633] ata10.00: configured for UDMA/133 (device error ignored)
[ 2677.126754] ata10: EH complete

smart sdj

smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.8.0-53-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF READ SMART DATA SECTION ===
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0027   196   180   021    Pre-fail  Always       -       5158
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       204
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   100   253   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   065   065   000    Old_age   Always       -       25722
 10 Spin_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   100   100   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       164
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       144
193 Load_Cycle_Count        0x0032   191   191   000    Old_age   Always       -       28547
194 Temperature_Celsius     0x0022   118   109   000    Old_age   Always       -       32
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   100   253   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       1
200 Multi_Zone_Error_Rate   0x0008   200   200   000    Old_age   Offline      -       0

sdk

smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.8.0-53-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF READ SMART DATA SECTION ===
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0027   176   176   021    Pre-fail  Always       -       6175
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       203
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   100   253   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   065   065   000    Old_age   Always       -       25728
 10 Spin_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   100   100   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       164
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       144
193 Load_Cycle_Count        0x0032   191   191   000    Old_age   Always       -       28542
194 Temperature_Celsius     0x0022   118   109   000    Old_age   Always       -       32
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   100   253   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       1
200 Multi_Zone_Error_Rate   0x0008   200   200   000    Old_age   Offline      -       0

vypadaji uplne ok. ale hlasi v logu SMARTU nejake ATA chyby (sdj i k)

SMART Error Log Version: 1
ATA Error Count: 152 (device log contains only the most recent five errors)
        CR = Command Register [HEX]
        FR = Features Register [HEX]
        SC = Sector Count Register [HEX]
        SN = Sector Number Register [HEX]
        CL = Cylinder Low Register [HEX]
        CH = Cylinder High Register [HEX]
        DH = Device/Head Register [HEX]
        DC = Device Command Register [HEX]
        ER = Error register [HEX]
        ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 152 occurred at disk power-on lifetime: 25727 hours (1071 days + 23 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 61 02 00 00 00 a0  Device Fault; Error: ABRT

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ef 10 02 00 00 00 a0 00      01:14:04.188  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 00      01:14:04.187  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 00      01:14:04.185  SET FEATURES [Set transfer mode]
  ef 10 02 00 00 00 a0 00      01:14:04.182  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 00      01:14:04.182  IDENTIFY DEVICE

Error 151 occurred at disk power-on lifetime: 25727 hours (1071 days + 23 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 61 46 00 00 00 a0  Device Fault; Error: ABRT

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ef 03 46 00 00 00 a0 00      01:14:04.185  SET FEATURES [Set transfer mode]
  ef 10 02 00 00 00 a0 00      01:14:04.182  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 00      01:14:04.182  IDENTIFY DEVICE
  ef 10 02 00 00 00 a0 00      01:14:04.168  SET FEATURES [Enable SATA feature]

Error 150 occurred at disk power-on lifetime: 25727 hours (1071 days + 23 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 61 02 00 00 00 a0  Device Fault; Error: ABRT

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ef 10 02 00 00 00 a0 00      01:14:04.182  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 00      01:14:04.182  IDENTIFY DEVICE
  ef 10 02 00 00 00 a0 00      01:14:04.168  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 00      01:14:04.167  IDENTIFY DEVICE

Error 149 occurred at disk power-on lifetime: 25727 hours (1071 days + 23 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 61 02 00 00 00 a0  Device Fault; Error: ABRT

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ef 10 02 00 00 00 a0 00      01:14:04.168  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 00      01:14:04.167  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 00      01:14:04.165  SET FEATURES [Set transfer mode]
  ef 10 02 00 00 00 a0 00      01:14:04.162  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 00      01:14:04.162  IDENTIFY DEVICE

Error 148 occurred at disk power-on lifetime: 25727 hours (1071 days + 23 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 61 46 00 00 00 a0  Device Fault; Error: ABRT

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ef 03 46 00 00 00 a0 00      01:14:04.165  SET FEATURES [Set transfer mode]
  ef 10 02 00 00 00 a0 00      01:14:04.162  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 00      01:14:04.162  IDENTIFY DEVICE
  ef 10 02 00 00 00 a0 00      01:14:04.148  SET FEATURES [Enable SATA feature]

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed without error       00%     22789         -
# 2  Short offline       Completed without error       00%         0         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Predpokladam, ze chcipnul radic?

---

---

Odpovědi

[dustin]

Na první pohled to tak vypadá. Vyměň, uvidíš.

Teoreticky by mohl i jeden vadný disk rozhodit celý řadič, ten Marvell není žádný profi čip, ale to vařím z vody.

Osobně bych do důležitějšího serveru místo této hračky použil nějaký LSI, např. tenhle není drahý http://www.ebay.com/itm/Fujitsu-D2607-A11SAS2008-SAS-SATA-RAID-SAS-controller-LSI-9210-9211-9240-9220-/122241111415?hash=item1c76235577:g:5NEAAOSwux5YN873

[Michal]

Mel jsem LSI Logic / Symbios Logic SAS2308 PCI-Express Fusion-MPT SAS-2 (rev 05)ale delal problemy viz http://www.abclinuxu.cz/poradna/linux/show/425068 tak sel na reklamaci. Asi mam na ty radice nejaky pech...

[alkoholik]

Pan Muprhy rika, ze vymenis radic a disky, abys nakonec zjistil, ze slo o vadny kabel.

[Tomáš Bžatek]

Pravda, WRITE FPDMA QUEUED jsem dostaval pri vadnem kabelu, na ruznych discich a ruznych radicich, tentyz spatny kabel. Nez jsem na to dosel, mel jsem plny SMART log v nekolika discich.

[Tomáš Bžatek]

Haha, typicky Marvell, taky jsem mel 88SE9230 a delal mi uplne to stejne. Mozna by pomohl nejaky novejsi firmware, ale na to jsem nemel koule, po zkusenostech s flashovanim ASMedia ASM1061 radicu.

Dalsi nectnost Marvellu je spatna simultanni obsluha vice disku - pri cteni a zapisu trech disku zaroven ctvrty hladovel i nekolik sekund. Pri presvihnuti timeoutu pak libata kanal shodi.

[Michal]

No parada. Dva mesice to ale jelo v pohode (vcetne 2 kompletnich scrubu) a ted 2x hned po sobe problem. Asi to budu drzet v read only nez dorazi novy LSI z Ciny.

Je fakt, ze se to stalo, kdyz na ten osmidiskovy RAIDZ2 letel 10GB soubor pres 10Gbit sit coz nedelam moc casto...

Zatim bezi na tech discich long smart test (short probehl v poradku).

[Tomáš Bžatek]

Ano, ja ho mel asi dva roky a ty drobne timeouty (vylozene libata hlasil timeout pri zapisu) jsem ignoroval, pole se nerozpadlo a data tam byly vsechny. Takze ono to pouzitelne je, kdyz se to prilis nezatezuje. Jeden kanal naplno je bez problemu.

Problem nastal pri vetsim zatizeni, kdy jsem migroval jeden disk na druhy a do toho nahodne pristupoval na dalsi + ctvrty byl system. Tehdy se to sesypalo uplne cele.

[Michal]

Hmm tak ten smart test nedobehl, zase se vysypal nejaky SATA prikaz coz vedlo k resetu linky coz nasilne ukoncilo selftest.

[14434.792052] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[14434.792073] ata9.00: failed command: SMART
[14434.792081] ata9.00: cmd b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 16
                        res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[14434.792085] ata9.00: status: { DRDY }
[14434.792091] ata9: hard resetting link
[14435.106352] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[14435.108049] ata9.00: configured for UDMA/133
[14435.108079] ata9: EH complete
[15034.760116] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[15034.760125] ata10.00: failed command: SMART
[15034.760133] ata10.00: cmd b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 12
                        res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[15034.760137] ata10.00: status: { DRDY }
[15034.760144] ata10: hard resetting link
[15035.074755] ata10: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[15035.111722] ata10.00: configured for UDMA/133
[15035.111747] ata10: EH complete

To me doooost stve, budu muset zase koupit ten AGAGO kram za 1500 pac tohle v zivote nevyreklamuju (a i kdyby, tak to potrva mesic). Nessrovnatelne lepsi LSI SAS 9207-8i z ciny je jen o par korun drazsi... ale dorazi az za 4 tydny.

[dustin]

Mrkni na ebay.de, najdeš tam podobné ceny s dopravou za pár dnů z DE. Např. tuhle stačí přeflešnout na TI mod (bez raidu). Nebo rovnou zvolit TI variantu.

[Michal]

Tak jsem vymenil radic a sata kabliky. Stastne jsem spustil scrub... a:

[ 1225.948069] ata9.00: qc timeout (cmd 0x47)
[ 1225.949165] ata9.00: READ LOG DMA EXT failed, trying unqueued
[ 1225.949169] ata9: failed to read log page 10h (errno=-5)
[ 1225.949180] ata9.00: exception Emask 0x1 SAct 0x100 SErr 0x0 action 0x6 frozen
[ 1225.949183] ata9.00: irq_stat 0x40000008
[ 1225.949187] ata9.00: failed command: WRITE FPDMA QUEUED
[ 1225.949194] ata9.00: cmd 61/08:40:80:ed:06/00:00:ee:00:00/40 tag 8 ncq dma 4096 out
                        res 50/00:00:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 1225.949198] ata9.00: status: { DRDY }
[ 1225.949205] ata9: hard resetting link
[ 1231.304050] ata9: link is slow to respond, please be patient (ready=0)
[ 1235.984055] ata9: COMRESET failed (errno=-16)
[ 1235.984065] ata9: hard resetting link
[ 1236.776087] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 1236.776096] ata10.00: failed command: SMART
[ 1236.776105] ata10.00: cmd b0/d0:01:00:4f:c2/00:00:00:00:00/00 tag 25 pio 512 in
                        res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 1236.776109] ata10.00: status: { DRDY }
[ 1236.776115] ata10: hard resetting link
[ 1241.336051] ata9: link is slow to respond, please be patient (ready=0)
[ 1242.132050] ata10: link is slow to respond, please be patient (ready=0)
[ 1242.236057] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1242.432054] ata10: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1242.432768] ata9.00: configured for UDMA/133
[ 1242.432787] sd 8:0:0:0: [sdj] tag#8 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1242.432792] sd 8:0:0:0: [sdj] tag#8 Sense Key : Illegal Request [current]
[ 1242.432795] sd 8:0:0:0: [sdj] tag#8 Add. Sense: Unaligned write command
[ 1242.432800] sd 8:0:0:0: [sdj] tag#8 CDB: Write(16) 8a 00 00 00 00 00 ee 06 ed 80 00 00 00 08 00 00
[ 1242.432803] blk_update_request: I/O error, dev sdj, sector 3993431424
[ 1242.432829] ata9: EH complete
[ 1242.433820] ata10.00: configured for UDMA/133
[ 1242.433844] ata10: EH complete
[ 1254.728107] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 1254.728117] ata9.00: failed command: SMART
[ 1254.728125] ata9.00: cmd b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 20
                        res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 1254.728129] ata9.00: status: { DRDY }
[ 1254.728135] ata9: hard resetting link
[ 1255.042910] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1255.044588] ata9.00: configured for UDMA/133
[ 1255.044610] ata9: EH complete
[ 1267.420054] ata10.00: qc timeout (cmd 0x47)
[ 1267.421137] ata10.00: READ LOG DMA EXT failed, trying unqueued
[ 1267.421141] ata10: failed to read log page 10h (errno=-5)
[ 1267.421152] ata10.00: exception Emask 0x1 SAct 0xc0000 SErr 0x0 action 0x6 frozen
[ 1267.421155] ata10.00: irq_stat 0x40000008
[ 1267.421159] ata10.00: failed command: READ FPDMA QUEUED
[ 1267.421167] ata10.00: cmd 60/08:90:c0:9b:7e/00:00:16:01:00/40 tag 18 ncq dma 4096 in
                        res 50/00:00:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 1267.421171] ata10.00: status: { DRDY }
[ 1267.421174] ata10.00: failed command: READ FPDMA QUEUED
[ 1267.421181] ata10.00: cmd 60/08:98:c0:b8:d7/00:00:50:00:00/40 tag 19 ncq dma 4096 in
                        res 50/00:00:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 1267.421184] ata10.00: status: { DRDY }
[ 1267.421190] ata10: hard resetting link
[ 1267.734882] ata10: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1267.736532] ata10.00: configured for UDMA/133
[ 1267.736551] sd 9:0:0:0: [sdk] tag#18 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1267.736556] sd 9:0:0:0: [sdk] tag#18 Sense Key : Illegal Request [current]
[ 1267.736559] sd 9:0:0:0: [sdk] tag#18 Add. Sense: Unaligned write command
[ 1267.736564] sd 9:0:0:0: [sdk] tag#18 CDB: Read(16) 88 00 00 00 00 01 16 7e 9b c0 00 00 00 08 00 00
[ 1267.736567] blk_update_request: I/O error, dev sdk, sector 4672363456
[ 1267.736592] sd 9:0:0:0: [sdk] tag#19 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1267.736595] sd 9:0:0:0: [sdk] tag#19 Sense Key : Illegal Request [current]
[ 1267.736598] sd 9:0:0:0: [sdk] tag#19 Add. Sense: Unaligned write command
[ 1267.736601] sd 9:0:0:0: [sdk] tag#19 CDB: Read(16) 88 00 00 00 00 00 50 d7 b8 c0 00 00 00 08 00 00
[ 1267.736603] blk_update_request: I/O error, dev sdk, sector 1356314816
[ 1267.736614] ata10: EH complete
[ 1274.822457] ata9.00: exception Emask 0x0 SAct 0x30000 SErr 0x0 action 0x0
[ 1274.822465] ata9.00: irq_stat 0x40000008
[ 1274.822470] ata9.00: failed command: READ FPDMA QUEUED
[ 1274.822478] ata9.00: cmd 60/08:80:d0:f6:06/00:00:04:00:00/40 tag 16 ncq dma 4096 in
                        res 41/40:00:d0:f6:06/00:00:04:00:00/40 Emask 0x409 (media error) [F]
[ 1274.822482] ata9.00: status: { DRDY ERR }
[ 1274.822485] ata9.00: error: { UNC }
[ 1274.823962] ata9.00: configured for UDMA/133
[ 1274.823980] sd 8:0:0:0: [sdj] tag#16 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1274.823984] sd 8:0:0:0: [sdj] tag#16 Sense Key : Medium Error [current]
[ 1274.823988] sd 8:0:0:0: [sdj] tag#16 Add. Sense: Unrecovered read error - auto reallocate failed
[ 1274.823994] sd 8:0:0:0: [sdj] tag#16 CDB: Read(16) 88 00 00 00 00 00 04 06 f6 d0 00 00 00 08 00 00
[ 1274.823996] blk_update_request: I/O error, dev sdj, sector 67565264
[ 1274.824049] ata9: EH complete
[ 1281.982446] ata10.00: exception Emask 0x0 SAct 0x20000 SErr 0x0 action 0x0
[ 1281.982454] ata10.00: irq_stat 0x40000008
[ 1281.982459] ata10.00: failed command: WRITE FPDMA QUEUED
[ 1281.982467] ata10.00: cmd 61/08:88:90:ed:06/00:00:ee:00:00/40 tag 17 ncq dma 4096 out
                        res 41/10:00:90:ed:06/00:00:ee:00:00/40 Emask 0x481 (invalid argument) [F]
[ 1281.982471] ata10.00: status: { DRDY ERR }
[ 1281.982474] ata10.00: error: { IDNF }
[ 1281.983994] ata10.00: configured for UDMA/133
[ 1281.984037] sd 9:0:0:0: [sdk] tag#17 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1281.984042] sd 9:0:0:0: [sdk] tag#17 Sense Key : Illegal Request [current]
[ 1281.984045] sd 9:0:0:0: [sdk] tag#17 Add. Sense: Logical block address out of range
[ 1281.984051] sd 9:0:0:0: [sdk] tag#17 CDB: Write(16) 8a 00 00 00 00 00 ee 06 ed 90 00 00 00 08 00 00
[ 1281.984053] blk_update_request: I/O error, dev sdk, sector 3993431440
[ 1281.984077] ata10: EH complete
[ 1289.046435] ata9.00: exception Emask 0x0 SAct 0x400000 SErr 0x0 action 0x0
[ 1289.046443] ata9.00: irq_stat 0x40000008
[ 1289.046448] ata9.00: failed command: WRITE FPDMA QUEUED
[ 1289.046456] ata9.00: cmd 61/08:b0:b0:ed:06/00:00:ee:00:00/40 tag 22 ncq dma 4096 out
                        res 41/10:00:b0:ed:06/00:00:ee:00:00/40 Emask 0x481 (invalid argument) [F]
[ 1289.046460] ata9.00: status: { DRDY ERR }
[ 1289.046463] ata9.00: error: { IDNF }
[ 1289.047947] ata9.00: configured for UDMA/133
[ 1289.047963] sd 8:0:0:0: [sdj] tag#22 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1289.047968] sd 8:0:0:0: [sdj] tag#22 Sense Key : Illegal Request [current]
[ 1289.047972] sd 8:0:0:0: [sdj] tag#22 Add. Sense: Logical block address out of range
[ 1289.047976] sd 8:0:0:0: [sdj] tag#22 CDB: Write(16) 8a 00 00 00 00 00 ee 06 ed b0 00 00 00 08 00 00
[ 1289.047979] blk_update_request: I/O error, dev sdj, sector 3993431472
[ 1289.048031] ata9: EH complete
[ 1296.249388] ata10.00: exception Emask 0x0 SAct 0x20000 SErr 0x0 action 0x0
[ 1296.249395] ata10.00: irq_stat 0x40000008
[ 1296.249400] ata10.00: failed command: WRITE FPDMA QUEUED
[ 1296.249409] ata10.00: cmd 61/08:88:b8:ed:06/00:00:ee:00:00/40 tag 17 ncq dma 4096 out
                        res 41/10:00:b8:ed:06/00:00:ee:00:00/40 Emask 0x481 (invalid argument) [F]
[ 1296.249413] ata10.00: status: { DRDY ERR }
[ 1296.249415] ata10.00: error: { IDNF }
[ 1296.250941] ata10.00: configured for UDMA/133
[ 1296.250957] sd 9:0:0:0: [sdk] tag#17 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1296.250962] sd 9:0:0:0: [sdk] tag#17 Sense Key : Illegal Request [current]
[ 1296.250965] sd 9:0:0:0: [sdk] tag#17 Add. Sense: Logical block address out of range
[ 1296.250970] sd 9:0:0:0: [sdk] tag#17 CDB: Write(16) 8a 00 00 00 00 00 ee 06 ed b8 00 00 00 08 00 00
[ 1296.250973] blk_update_request: I/O error, dev sdk, sector 3993431480
[ 1296.250996] ata10: EH complete
[ 1407.250454] ata10.00: exception Emask 0x0 SAct 0x1c00000 SErr 0x0 action 0x0
[ 1407.250462] ata10.00: irq_stat 0x40000008
[ 1407.250467] ata10.00: failed command: WRITE FPDMA QUEUED
[ 1407.250475] ata10.00: cmd 61/10:b0:10:0a:00/00:00:00:00:00/40 tag 22 ncq dma 8192 out
                        res 41/10:00:10:0a:00/00:00:00:00:00/40 Emask 0x481 (invalid argument) [F>
[ 1407.250479] ata10.00: status: { DRDY ERR }
[ 1407.250482] ata10.00: error: { IDNF }
[ 1407.251848] ata10.00: configured for UDMA/133
[ 1407.251860] ata10: EH complete
[ 1414.342433] ata9.00: exception Emask 0x0 SAct 0x1c SErr 0x0 action 0x0
[ 1414.342439] ata9.00: irq_stat 0x40000008
[ 1414.342444] ata9.00: failed command: WRITE FPDMA QUEUED
[ 1414.342452] ata9.00: cmd 61/10:10:10:5c:50/00:00:5d:01:00/40 tag 2 ncq dma 8192 out
                        res 41/10:00:10:5c:50/00:00:5d:01:00/40 Emask 0x481 (invalid argument) [F>
[ 1414.342456] ata9.00: status: { DRDY ERR }
[ 1414.342459] ata9.00: error: { IDNF }
[ 1414.343958] ata9.00: configured for UDMA/133
[ 1414.343969] ata9: EH complete
[ 1427.982416] ata9.00: exception Emask 0x0 SAct 0xc000000 SErr 0x0 action 0x0
[ 1427.982423] ata9.00: irq_stat 0x40000008
[ 1427.982427] ata9.00: failed command: READ FPDMA QUEUED
[ 1427.982433] ata9.00: cmd 60/08:d8:d0:f6:06/00:00:04:00:00/40 tag 27 ncq dma 4096 in
                        res 41/40:00:d0:f6:06/00:00:04:00:00/40 Emask 0x409 (media error) [F>
[ 1427.982436] ata9.00: status: { DRDY ERR }
[ 1427.982438] ata9.00: error: { UNC }
[ 1427.983889] ata9.00: configured for UDMA/133
[ 1427.983908] sd 8:0:0:0: [sdj] tag#27 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1427.983911] sd 8:0:0:0: [sdj] tag#27 Sense Key : Medium Error [current]
[ 1427.983914] sd 8:0:0:0: [sdj] tag#27 Add. Sense: Unrecovered read error - auto reallocate failed
[ 1427.983918] sd 8:0:0:0: [sdj] tag#27 CDB: Read(16) 88 00 00 00 00 00 04 06 f6 d0 00 00 00 08 00 00
[ 1427.983920] blk_update_request: I/O error, dev sdj, sector 67565264
[ 1427.983939] ata9: EH complete
[ 1435.138394] ata10.00: exception Emask 0x0 SAct 0x400000 SErr 0x0 action 0x0
[ 1435.138401] ata10.00: irq_stat 0x40000008
[ 1435.138407] ata10.00: failed command: WRITE FPDMA QUEUED
[ 1435.138415] ata10.00: cmd 61/08:b0:c0:ed:06/00:00:ee:00:00/40 tag 22 ncq dma 4096 out
                        res 41/10:00:c0:ed:06/00:00:ee:00:00/40 Emask 0x481 (invalid argument) [F>
[ 1435.138419] ata10.00: status: { DRDY ERR }
[ 1435.138422] ata10.00: error: { IDNF }
[ 1435.139789] ata10.00: configured for UDMA/133
[ 1435.139806] sd 9:0:0:0: [sdk] tag#22 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1435.139811] sd 9:0:0:0: [sdk] tag#22 Sense Key : Illegal Request [current]
[ 1435.139814] sd 9:0:0:0: [sdk] tag#22 Add. Sense: Logical block address out of range
[ 1435.139819] sd 9:0:0:0: [sdk] tag#22 CDB: Write(16) 8a 00 00 00 00 00 ee 06 ed c0 00 00 00 08 00 00
[ 1435.139822] blk_update_request: I/O error, dev sdk, sector 3993431488
[ 1435.139843] ata10: EH complete
[ 1442.206442] ata9.00: exception Emask 0x0 SAct 0x2 SErr 0x0 action 0x0
[ 1442.206449] ata9.00: irq_stat 0x40000008
[ 1442.206454] ata9.00: failed command: WRITE FPDMA QUEUED
[ 1442.206462] ata9.00: cmd 61/08:08:d8:ed:06/00:00:ee:00:00/40 tag 1 ncq dma 4096 out
                        res 41/10:00:d8:ed:06/00:00:ee:00:00/40 Emask 0x481 (invalid argument) [F>
[ 1442.206466] ata9.00: status: { DRDY ERR }
[ 1442.206469] ata9.00: error: { IDNF }
[ 1442.207960] ata9.00: configured for UDMA/133
[ 1442.207977] sd 8:0:0:0: [sdj] tag#1 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1442.207981] sd 8:0:0:0: [sdj] tag#1 Sense Key : Illegal Request [current]
[ 1442.207985] sd 8:0:0:0: [sdj] tag#1 Add. Sense: Logical block address out of range
[ 1442.207990] sd 8:0:0:0: [sdj] tag#1 CDB: Write(16) 8a 00 00 00 00 00 ee 06 ed d8 00 00 00 08 00 00
[ 1442.207993] blk_update_request: I/O error, dev sdj, sector 3993431512
[ 1442.208043] ata9: EH complete
[ 1510.042447] ata9.00: exception Emask 0x0 SAct 0x1e0 SErr 0x0 action 0x0
[ 1510.042455] ata9.00: irq_stat 0x40000008
[ 1510.042460] ata9.00: failed command: WRITE FPDMA QUEUED
[ 1510.042468] ata9.00: cmd 61/08:28:58:09:00/00:00:00:00:00/40 tag 5 ncq dma 4096 out
                        res 41/10:00:58:09:00/00:00:00:00:00/40 Emask 0x481 (invalid argument) [F>
[ 1510.042472] ata9.00: status: { DRDY ERR }
[ 1510.042475] ata9.00: error: { IDNF }
[ 1510.043961] ata9.00: configured for UDMA/133
[ 1510.043978] sd 8:0:0:0: [sdj] tag#5 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1510.043982] sd 8:0:0:0: [sdj] tag#5 Sense Key : Illegal Request [current]
[ 1510.043986] sd 8:0:0:0: [sdj] tag#5 Add. Sense: Logical block address out of range
[ 1510.043991] sd 8:0:0:0: [sdj] tag#5 CDB: Write(16) 8a 00 00 00 00 00 00 00 09 58 00 00 00 08 00 00
[ 1510.043994] blk_update_request: I/O error, dev sdj, sector 2392
[ 1510.044044] ata9: EH complete

Tak ted uz faaaaaaakt nevim

[ZAH]

Možná střela naslepo, ale

GRUB_CMDLINE_LINUX = "libata.force = noncq" 

[Michal]

Hmm vyzkousim... je to ale docela zoufalstvi protoze na stejnem radici jsou dalsi 2 disky. Krome toho uvodniho pripadu se na nich zadny problem neprojevil. Porad jen sdj a k. A predtim to jelo asi 2 mesice i s ncq...

[Michal]

Tak nepomohlo. Ale hodilo to velmi zajimave a nove chyby

[  234.472080] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  234.472084] ata9.00: failed command: FLUSH CACHE EXT
[  234.472086] ata9.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 2
                        res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[  234.472087] ata9.00: status: { DRDY }
[  234.472090] ata9: hard resetting link
[  234.472096] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  234.472098] ata10.00: failed command: FLUSH CACHE EXT
[  234.472100] ata10.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 27
                        res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[  234.472102] ata10.00: status: { DRDY }
[  234.472103] ata10: hard resetting link
[  239.824048] ata9: link is slow to respond, please be patient (ready=0)
[  239.828066] ata10: link is slow to respond, please be patient (ready=0)
[  244.504044] ata9: COMRESET failed (errno=-16)
[  244.504061] ata9: hard resetting link
[  244.512050] ata10: COMRESET failed (errno=-16)
[  244.512057] ata10: hard resetting link
[  249.856015] ata9: link is slow to respond, please be patient (ready=0)
[  249.864016] ata10: link is slow to respond, please be patient (ready=0)
[  254.536060] ata9: COMRESET failed (errno=-16)
[  254.536063] ata9: hard resetting link
[  254.544033] ata10: COMRESET failed (errno=-16)
[  254.544038] ata10: hard resetting link
[  255.388063] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[  259.900016] ata10: link is slow to respond, please be patient (ready=0)
[  260.572074] ata9.00: qc timeout (cmd 0xec)
[  260.573155] ata9.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[  260.573158] ata9.00: revalidation failed (errno=-5)
[  260.573167] ata9: hard resetting link
[  265.924044] ata9: link is slow to respond, please be patient (ready=0)
[  270.604068] ata9: COMRESET failed (errno=-16)
[  270.604071] ata9: hard resetting link
[  275.956046] ata9: link is slow to respond, please be patient (ready=0)
[  276.288061] ata10: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[  276.496060] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[  276.498969] ata9.00: failed to read native max address (err_mask=0x1)
[  276.498971] ata9.00: HPA support seems broken, skipping HPA handling
[  276.501902] ata9.00: configured for UDMA/133 (device error ignored)
[  276.501906] ata9.00: retrying FLUSH 0xea Emask 0x4
[  276.504190] ata9.00: FLUSH failed Emask 0x1
[  276.504195] ata9.00: device reported invalid CHS sector 0
[  276.505272] ata9: EH complete
[  276.517201] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  276.517207] ata9.00: irq_stat 0x40000001
[  276.517211] ata9.00: failed command: FLUSH CACHE EXT
[  276.517219] ata9.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 3
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[  276.517223] ata9.00: status: { DRDY ERR }
[  276.517225] ata9.00: error: { ABRT }
[  276.520748] ata9.00: configured for UDMA/133 (device error ignored)
[  276.520753] ata9.00: device reported invalid CHS sector 0
[  276.521831] ata9: EH complete
[  276.533206] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  276.533224] ata9.00: irq_stat 0x40000001
[  276.533227] ata9.00: failed command: FLUSH CACHE EXT
[  276.533234] ata9.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 4
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[  276.533238] ata9.00: status: { DRDY ERR }
[  276.533240] ata9.00: error: { ABRT }
[  276.536759] ata9.00: configured for UDMA/133 (device error ignored)
[  276.536764] ata9.00: device reported invalid CHS sector 0
[  276.537841] ata9: EH complete
[  276.549202] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  276.549207] ata9.00: irq_stat 0x40000001
[  276.549210] ata9.00: failed command: FLUSH CACHE EXT
[  276.549218] ata9.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 5
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[  276.549221] ata9.00: status: { DRDY ERR }
[  276.549224] ata9.00: error: { ABRT }
[  276.552729] ata9.00: configured for UDMA/133 (device error ignored)
[  276.552734] ata9.00: device reported invalid CHS sector 0
[  276.553811] ata9: EH complete
[  276.565217] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  276.565223] ata9.00: irq_stat 0x40000001
[  276.565226] ata9.00: failed command: FLUSH CACHE EXT
[  276.565233] ata9.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 6
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[  276.565237] ata9.00: status: { DRDY ERR }
[  276.565239] ata9.00: error: { ABRT }
[  276.568750] ata9.00: configured for UDMA/133 (device error ignored)
[  276.568755] ata9.00: device reported invalid CHS sector 0
[  276.569832] ata9: EH complete
[  276.581218] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  276.581224] ata9.00: irq_stat 0x40000001
[  276.581227] ata9.00: failed command: FLUSH CACHE EXT
[  276.581234] ata9.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 7
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[  276.581238] ata9.00: status: { DRDY ERR }
[  276.581240] ata9.00: error: { ABRT }
[  276.584745] ata9.00: configured for UDMA/133 (device error ignored)
[  276.584750] ata9.00: device reported invalid CHS sector 0
[  276.585843] sd 8:0:0:0: [sdj] tag#7 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  276.585847] sd 8:0:0:0: [sdj] tag#7 Sense Key : Illegal Request [current]
[  276.585850] sd 8:0:0:0: [sdj] tag#7 Add. Sense: Unaligned write command
[  276.585855] sd 8:0:0:0: [sdj] tag#7 CDB: Synchronize Cache(10) 35 00 00 00 00 00 00 00 00 00
[  276.585861] blk_update_request: I/O error, dev sdj, sector 0
[  276.585882] ata9: EH complete
[  281.308045] ata10.00: qc timeout (cmd 0xec)
[  281.309126] ata10.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[  281.309129] ata10.00: revalidation failed (errno=-5)
[  281.309136] ata10: hard resetting link
[  284.860081] ata10: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[  284.970447] ata10.00: failed to read native max address (err_mask=0x1)
[  284.970450] ata10.00: HPA support seems broken, skipping HPA handling
[  284.975890] ata10.00: configured for UDMA/133 (device error ignored)
[  284.975894] ata10.00: retrying FLUSH 0xea Emask 0x4
[  284.978229] ata10.00: FLUSH failed Emask 0x1
[  284.978233] ata10.00: device reported invalid CHS sector 0
[  284.979321] ata10: EH complete
[  284.993228] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  284.993235] ata10.00: irq_stat 0x40000001
[  284.993239] ata10.00: failed command: FLUSH CACHE EXT
[  284.993246] ata10.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 28
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[  284.993250] ata10.00: status: { DRDY ERR }
[  284.993253] ata10.00: error: { ABRT }
[  284.996736] ata10.00: configured for UDMA/133 (device error ignored)
[  284.996741] ata10.00: device reported invalid CHS sector 0
[  284.997819] ata10: EH complete
[  285.009204] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  285.009209] ata10.00: irq_stat 0x40000001
[  285.009212] ata10.00: failed command: FLUSH CACHE EXT
[  285.009217] ata10.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 29
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[  285.009220] ata10.00: status: { DRDY ERR }
[  285.009222] ata10.00: error: { ABRT }
[  285.012738] ata10.00: configured for UDMA/133 (device error ignored)
[  285.012743] ata10.00: device reported invalid CHS sector 0
[  285.013819] ata10: EH complete
[  285.025214] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  285.025218] ata10.00: irq_stat 0x40000001
[  285.025221] ata10.00: failed command: FLUSH CACHE EXT
[  285.025227] ata10.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 30
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[  285.025230] ata10.00: status: { DRDY ERR }
[  285.025232] ata10.00: error: { ABRT }
[  285.028749] ata10.00: configured for UDMA/133 (device error ignored)
[  285.028754] ata10.00: device reported invalid CHS sector 0
[  285.029831] ata10: EH complete
[  285.041186] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  285.041190] ata10.00: irq_stat 0x40000001
[  285.041192] ata10.00: failed command: FLUSH CACHE EXT
[  285.041196] ata10.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[  285.041198] ata10.00: status: { DRDY ERR }
[  285.041200] ata10.00: error: { ABRT }
[  285.044687] ata10.00: configured for UDMA/133 (device error ignored)
[  285.044691] ata10.00: device reported invalid CHS sector 0
[  285.045781] ata10: EH complete
[  285.057227] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  285.057231] ata10.00: irq_stat 0x40000001
[  285.057233] ata10.00: failed command: FLUSH CACHE EXT
[  285.057237] ata10.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 1
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[  285.057239] ata10.00: status: { DRDY ERR }
[  285.057241] ata10.00: error: { ABRT }
[  285.060725] ata10.00: configured for UDMA/133 (device error ignored)
[  285.060729] ata10.00: device reported invalid CHS sector 0
[  285.061808] sd 9:0:0:0: [sdk] tag#1 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  285.061824] sd 9:0:0:0: [sdk] tag#1 Sense Key : Illegal Request [current]
[  285.061827] sd 9:0:0:0: [sdk] tag#1 Add. Sense: Unaligned write command
[  285.061830] sd 9:0:0:0: [sdk] tag#1 CDB: Synchronize Cache(10) 35 00 00 00 00 00 00 00 00 00
[  285.061836] blk_update_request: I/O error, dev sdk, sector 0
[  285.061853] ata10: EH complete
[  285.073161] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  285.073165] ata10.00: irq_stat 0x40000001
[  285.073167] ata10.00: failed command: WRITE DMA
[  285.073172] ata10.00: cmd ca/00:08:88:09:00/00:00:00:00:00/e0 tag 5 dma 4096 out
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[  285.073175] ata10.00: status: { DRDY ERR }
[  285.073176] ata10.00: error: { ABRT }
[  285.076668] ata10.00: configured for UDMA/133 (device error ignored)
[  285.077211] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  285.077217] ata9.00: irq_stat 0x40000001
[  285.077221] ata9.00: failed command: WRITE DMA
[  285.077237] ata9.00: cmd ca/00:08:88:09:00/00:00:00:00:00/e0 tag 2 dma 4096 out
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[  285.077238] ata9.00: status: { DRDY ERR }
[  285.077239] ata9.00: error: { ABRT }
[  285.077755] sd 9:0:0:0: [sdk] tag#5 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  285.077759] sd 9:0:0:0: [sdk] tag#5 Sense Key : Illegal Request [current]
[  285.077762] sd 9:0:0:0: [sdk] tag#5 Add. Sense: Unaligned write command
[  285.077767] sd 9:0:0:0: [sdk] tag#5 CDB: Write(16) 8a 00 00 00 00 00 00 00 09 88 00 00 00 08 00 00
[  285.077769] blk_update_request: I/O error, dev sdk, sector 2440
[  285.077791] ata10: EH complete
[  285.081791] ata9.00: configured for UDMA/133 (device error ignored)
[  285.082901] sd 8:0:0:0: [sdj] tag#2 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  285.082904] sd 8:0:0:0: [sdj] tag#2 Sense Key : Illegal Request [current]
[  285.082907] sd 8:0:0:0: [sdj] tag#2 Add. Sense: Unaligned write command
[  285.082910] sd 8:0:0:0: [sdj] tag#2 CDB: Write(16) 8a 00 00 00 00 00 00 00 09 88 00 00 00 08 00 00
[  285.082913] blk_update_request: I/O error, dev sdj, sector 2440
[  285.082928] ata9: EH complete
[  285.093133] ata10: limiting SATA link speed to 3.0 Gbps
[  285.093138] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[  285.093156] ata10.00: irq_stat 0x40000001
[  285.093158] ata10.00: failed command: WRITE DMA
[  285.093163] ata10.00: cmd ca/00:08:88:0b:00/00:00:00:00:00/e0 tag 8 dma 4096 out
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[  285.093165] ata10.00: status: { DRDY ERR }
[  285.093167] ata10.00: error: { ABRT }
[  285.093170] ata10: hard resetting link
[  285.098265] ata9: limiting SATA link speed to 3.0 Gbps
[  285.098269] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[  285.098275] ata9.00: irq_stat 0x40000001
[  285.098291] ata9.00: failed command: WRITE DMA
[  285.098293] ata9.00: cmd ca/00:08:88:0b:00/00:00:00:00:00/e0 tag 5 dma 4096 out
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[  285.098294] ata9.00: status: { DRDY ERR }
[  285.098295] ata9.00: error: { ABRT }
[  285.098297] ata9: hard resetting link
[  285.406848] ata10: SATA link up 6.0 Gbps (SStatus 133 SControl 320)
[  285.532063] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 320)
[  285.535250] ata10.00: configured for UDMA/133 (device error ignored)
[  285.536336] sd 9:0:0:0: [sdk] tag#8 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  285.536340] sd 9:0:0:0: [sdk] tag#8 Sense Key : Illegal Request [current]
[  285.536343] sd 9:0:0:0: [sdk] tag#8 Add. Sense: Unaligned write command
[  285.536347] sd 9:0:0:0: [sdk] tag#8 CDB: Write(16) 8a 00 00 00 00 00 00 00 0b 88 00 00 00 08 00 00
[  285.536350] blk_update_request: I/O error, dev sdk, sector 2952
[  285.536376] ata10: EH complete
[  285.536430] ata9.00: configured for UDMA/133 (device error ignored)
[  285.537534] sd 8:0:0:0: [sdj] tag#5 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  285.537538] sd 8:0:0:0: [sdj] tag#5 Sense Key : Illegal Request [current]
[  285.537542] sd 8:0:0:0: [sdj] tag#5 Add. Sense: Unaligned write command
[  285.537546] sd 8:0:0:0: [sdj] tag#5 CDB: Write(16) 8a 00 00 00 00 00 00 00 0b 88 00 00 00 08 00 00
[  285.537549] blk_update_request: I/O error, dev sdj, sector 2952
[  285.537595] ata9: EH complete
[  285.549121] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  285.549139] ata10.00: irq_stat 0x40000001
[  285.549143] ata10.00: failed command: WRITE DMA EXT
[  285.549149] ata10.00: cmd 35/00:08:88:5d:50/00:00:5d:01:00/e0 tag 12 dma 4096 out
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[  285.549152] ata10.00: status: { DRDY ERR }
[  285.549154] ata10.00: error: { ABRT }
[  285.549185] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  285.549202] ata9.00: irq_stat 0x40000001
[  285.549205] ata9.00: failed command: WRITE DMA EXT
[  285.549212] ata9.00: cmd 35/00:08:88:5d:50/00:00:5d:01:00/e0 tag 9 dma 4096 out
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[  285.549215] ata9.00: status: { DRDY ERR }
[  285.549217] ata9.00: error: { ABRT }
[  285.553903] ata9.00: configured for UDMA/133 (device error ignored)
[  285.553930] ata10.00: configured for UDMA/133 (device error ignored)
[  285.555000] sd 8:0:0:0: [sdj] tag#9 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  285.555004] sd 8:0:0:0: [sdj] tag#9 Sense Key : Illegal Request [current]
[  285.555006] sd 8:0:0:0: [sdj] tag#9 Add. Sense: Unaligned write command
[  285.555010] sd 8:0:0:0: [sdj] tag#9 CDB: Write(16) 8a 00 00 00 00 01 5d 50 5d 88 00 00 00 08 00 00
[  285.555012] blk_update_request: I/O error, dev sdj, sector 5860515208
[  285.555028] ata9: EH complete
[  285.555047] sd 9:0:0:0: [sdk] tag#12 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  285.555051] sd 9:0:0:0: [sdk] tag#12 Sense Key : Illegal Request [current]
[  285.555054] sd 9:0:0:0: [sdk] tag#12 Add. Sense: Unaligned write command
[  285.555057] sd 9:0:0:0: [sdk] tag#12 CDB: Write(16) 8a 00 00 00 00 01 5d 50 5d 88 00 00 00 08 00 00
[  285.555060] blk_update_request: I/O error, dev sdk, sector 5860515208
[  285.555075] ata10: EH complete
[  285.569173] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  285.569179] ata9.00: irq_stat 0x40000001
[  285.569184] ata9.00: failed command: WRITE DMA EXT
[  285.569192] ata9.00: cmd 35/00:08:88:5f:50/00:00:5d:01:00/e0 tag 11 dma 4096 out
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[  285.569196] ata9.00: status: { DRDY ERR }
[  285.569199] ata9.00: error: { ABRT }
[  285.569219] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  285.569221] ata10.00: irq_stat 0x40000001
[  285.569222] ata10.00: failed command: WRITE DMA EXT
[  285.569224] ata10.00: cmd 35/00:08:88:5f:50/00:00:5d:01:00/e0 tag 16 dma 4096 out
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[  285.569225] ata10.00: status: { DRDY ERR }
[  285.569226] ata10.00: error: { ABRT }
[  285.573953] ata9.00: configured for UDMA/133 (device error ignored)
[  285.573980] ata10.00: configured for UDMA/133 (device error ignored)
[  285.575036] sd 8:0:0:0: [sdj] tag#11 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  285.575040] sd 8:0:0:0: [sdj] tag#11 Sense Key : Illegal Request [current]
[  285.575043] sd 8:0:0:0: [sdj] tag#11 Add. Sense: Unaligned write command
[  285.575048] sd 8:0:0:0: [sdj] tag#11 CDB: Write(16) 8a 00 00 00 00 01 5d 50 5f 88 00 00 00 08 00 00
[  285.575050] blk_update_request: I/O error, dev sdj, sector 5860515720
[  285.575077] ata9: EH complete
[  285.575086] sd 9:0:0:0: [sdk] tag#16 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  285.575089] sd 9:0:0:0: [sdk] tag#16 Sense Key : Illegal Request [current]
[  285.575092] sd 9:0:0:0: [sdk] tag#16 Add. Sense: Unaligned write command
[  285.575095] sd 9:0:0:0: [sdk] tag#16 CDB: Write(16) 8a 00 00 00 00 01 5d 50 5f 88 00 00 00 08 00 00
[  285.575097] blk_update_request: I/O error, dev sdk, sector 5860515720
[  285.575111] ata10: EH complete
[  285.589147] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  285.589153] ata10.00: irq_stat 0x40000001
[  285.589158] ata10.00: failed command: READ DMA
[  285.589166] ata10.00: cmd c8/00:10:10:0a:00/00:00:00:00:00/e0 tag 19 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[  285.589170] ata10.00: status: { DRDY ERR }
[  285.589173] ata10.00: error: { ABRT }
[  285.589192] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  285.589209] ata9.00: irq_stat 0x40000001
[  285.589211] ata9.00: failed command: READ DMA
[  285.589213] ata9.00: cmd c8/00:10:10:0a:00/00:00:00:00:00/e0 tag 15 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[  285.589214] ata9.00: status: { DRDY ERR }
[  285.589215] ata9.00: error: { ABRT }
[  285.593911] ata10.00: configured for UDMA/133 (device error ignored)
[  285.593932] ata9.00: configured for UDMA/133 (device error ignored)
[  285.594986] ata10: EH complete
[  285.595012] ata9: EH complete
[  285.609121] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  285.609125] ata10.00: irq_stat 0x40000001
[  285.609129] ata10.00: failed command: READ DMA
[  285.609136] ata10.00: cmd c8/00:10:10:0a:00/00:00:00:00:00/e0 tag 20 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[  285.609140] ata10.00: status: { DRDY ERR }
[  285.609143] ata10.00: error: { ABRT }
[  285.609171] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  285.609173] ata9.00: irq_stat 0x40000001
[  285.609174] ata9.00: failed command: READ DMA
[  285.609176] ata9.00: cmd c8/00:10:10:0a:00/00:00:00:00:00/e0 tag 16 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[  285.609177] ata9.00: status: { DRDY ERR }
[  285.609178] ata9.00: error: { ABRT }
[  285.613872] ata10.00: configured for UDMA/133 (device error ignored)
[  285.613892] ata9.00: configured for UDMA/133 (device error ignored)
[  285.614945] ata10: EH complete
[  285.614986] ata9: EH complete
[  285.629145] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  285.629148] ata10.00: irq_stat 0x40000001
[  285.629152] ata10.00: failed command: READ DMA
[  285.629159] ata10.00: cmd c8/00:10:10:0a:00/00:00:00:00:00/e0 tag 21 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[  285.629162] ata10.00: status: { DRDY ERR }
[  285.629165] ata10.00: error: { ABRT }
[  285.629216] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  285.629217] ata9.00: irq_stat 0x40000001
[  285.629219] ata9.00: failed command: READ DMA
[  285.629221] ata9.00: cmd c8/00:10:10:0a:00/00:00:00:00:00/e0 tag 17 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[  285.629222] ata9.00: status: { DRDY ERR }
[  285.629223] ata9.00: error: { ABRT }
[  285.633864] ata10.00: configured for UDMA/133 (device error ignored)
[  285.633889] ata9.00: configured for UDMA/133 (device error ignored)
[  285.634936] ata10: EH complete
[  285.634971] ata9: EH complete
[  285.649140] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  285.649143] ata10.00: irq_stat 0x40000001
[  285.649147] ata10.00: failed command: READ DMA
[  285.649154] ata10.00: cmd c8/00:10:10:0a:00/00:00:00:00:00/e0 tag 22 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[  285.649157] ata10.00: status: { DRDY ERR }
[  285.649160] ata10.00: error: { ABRT }
[  285.649191] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  285.649193] ata9.00: irq_stat 0x40000001
[  285.649194] ata9.00: failed command: READ DMA
[  285.649196] ata9.00: cmd c8/00:10:10:0a:00/00:00:00:00:00/e0 tag 18 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[  285.649198] ata9.00: status: { DRDY ERR }
[  285.649198] ata9.00: error: { ABRT }
[  285.653886] ata10.00: configured for UDMA/133 (device error ignored)
[  285.653905] ata9.00: configured for UDMA/133 (device error ignored)
[  285.654957] ata10: EH complete
[  285.654986] ata9: EH complete
[  285.669132] ata10: limiting SATA link speed to 1.5 Gbps
[  285.669135] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[  285.669138] ata10.00: irq_stat 0x40000001
[  285.669141] ata10.00: failed command: READ DMA
[  285.669148] ata10.00: cmd c8/00:10:10:0a:00/00:00:00:00:00/e0 tag 23 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[  285.669152] ata10.00: status: { DRDY ERR }
[  285.669154] ata10.00: error: { ABRT }
[  285.669158] ata10: hard resetting link
[  285.669196] ata9: limiting SATA link speed to 1.5 Gbps
[  285.669198] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[  285.669199] ata9.00: irq_stat 0x40000001
[  285.669201] ata9.00: failed command: READ DMA
[  285.669203] ata9.00: cmd c8/00:10:10:0a:00/00:00:00:00:00/e0 tag 19 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[  285.669204] ata9.00: status: { DRDY ERR }
[  285.669205] ata9.00: error: { ABRT }
[  285.669207] ata9: hard resetting link
[  285.982329] ata10: SATA link up 6.0 Gbps (SStatus 133 SControl 310)
[  286.110757] ata10.00: configured for UDMA/133 (device error ignored)
[  286.111844] ata10: EH complete
[  286.125192] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  286.125198] ata10.00: irq_stat 0x40000001
[  286.125202] ata10.00: failed command: READ DMA
[  286.125210] ata10.00: cmd c8/00:10:10:0a:00/00:00:00:00:00/e0 tag 24 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[  286.125214] ata10.00: status: { DRDY ERR }
[  286.125217] ata10.00: error: { ABRT }
[  286.128728] ata10.00: configured for UDMA/133 (device error ignored)
[  286.129830] sd 9:0:0:0: [sdk] tag#24 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  286.129834] sd 9:0:0:0: [sdk] tag#24 Sense Key : Illegal Request [current]
[  286.129837] sd 9:0:0:0: [sdk] tag#24 Add. Sense: Unaligned write command
[  286.129841] sd 9:0:0:0: [sdk] tag#24 CDB: Read(16) 88 00 00 00 00 00 00 00 0a 10 00 00 00 10 00 00
[  286.129843] blk_update_request: I/O error, dev sdk, sector 2576
[  286.129860] ata10: EH complete
[  286.141168] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  286.141185] ata10.00: irq_stat 0x40000001
[  286.141188] ata10.00: failed command: READ DMA EXT
[  286.141193] ata10.00: cmd 25/00:10:10:5c:50/00:00:5d:01:00/e0 tag 27 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[  286.141195] ata10.00: status: { DRDY ERR }
[  286.141197] ata10.00: error: { ABRT }
[  286.144696] ata10.00: configured for UDMA/133 (device error ignored)
[  286.145795] ata10: EH complete
[  286.157185] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  286.157189] ata10.00: irq_stat 0x40000001
[  286.157192] ata10.00: failed command: READ DMA EXT
[  286.157197] ata10.00: cmd 25/00:10:10:5c:50/00:00:5d:01:00/e0 tag 28 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[  286.157199] ata10.00: status: { DRDY ERR }
[  286.157201] ata10.00: error: { ABRT }
[  286.160056] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 310)
[  286.160771] ata10.00: configured for UDMA/133 (device error ignored)
[  286.161886] ata10: EH complete
[  286.163762] ata9.00: configured for UDMA/133 (device error ignored)
[  286.164856] ata9: EH complete
[  286.173185] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  286.173189] ata10.00: irq_stat 0x40000001
[  286.173192] ata10.00: failed command: READ DMA EXT
[  286.173197] ata10.00: cmd 25/00:10:10:5c:50/00:00:5d:01:00/e0 tag 29 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[  286.173199] ata10.00: status: { DRDY ERR }
[  286.173201] ata10.00: error: { ABRT }
[  286.176696] ata10.00: configured for UDMA/133 (device error ignored)
[  286.177148] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  286.177155] ata9.00: irq_stat 0x40000001
[  286.177159] ata9.00: failed command: READ DMA
[  286.177167] ata9.00: cmd c8/00:10:10:0a:00/00:00:00:00:00/e0 tag 20 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[  286.177171] ata9.00: status: { DRDY ERR }
[  286.177174] ata9.00: error: { ABRT }
[  286.177773] ata10: EH complete
[  286.181689] ata9.00: configured for UDMA/133 (device error ignored)
[  286.182794] ata9: EH complete
[  286.193206] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  286.193210] ata10.00: irq_stat 0x40000001
[  286.193214] ata10.00: failed command: READ DMA EXT
[  286.193219] ata10.00: cmd 25/00:10:10:5c:50/00:00:5d:01:00/e0 tag 30 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[  286.193222] ata10.00: status: { DRDY ERR }
[  286.193224] ata10.00: error: { ABRT }
[  286.196714] ata10.00: configured for UDMA/133 (device error ignored)
[  286.197164] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  286.197170] ata9.00: irq_stat 0x40000001
[  286.197175] ata9.00: failed command: READ DMA EXT
[  286.197183] ata9.00: cmd 25/00:10:10:5c:50/00:00:5d:01:00/e0 tag 24 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[  286.197198] ata9.00: status: { DRDY ERR }
[  286.197199] ata9.00: error: { ABRT }
[  286.197791] ata10: EH complete
[  286.201724] ata9.00: configured for UDMA/133 (device error ignored)
[  286.202804] ata9: EH complete
[  286.213201] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  286.213206] ata10.00: irq_stat 0x40000001
[  286.213209] ata10.00: failed command: READ DMA EXT
[  286.213215] ata10.00: cmd 25/00:10:10:5c:50/00:00:5d:01:00/e0 tag 0 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[  286.213218] ata10.00: status: { DRDY ERR }
[  286.213220] ata10.00: error: { ABRT }
[  286.216699] ata10.00: configured for UDMA/133 (device error ignored)
[  286.217186] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  286.217193] ata9.00: irq_stat 0x40000001
[  286.217209] ata9.00: failed command: READ DMA EXT
[  286.217211] ata9.00: cmd 25/00:10:10:5c:50/00:00:5d:01:00/e0 tag 25 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[  286.217212] ata9.00: status: { DRDY ERR }
[  286.217213] ata9.00: error: { ABRT }
[  286.217776] ata10: EH complete
[  286.221691] ata9.00: configured for UDMA/133 (device error ignored)
[  286.222771] ata9: EH complete
[  286.233210] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  286.233216] ata9.00: irq_stat 0x40000001
[  286.233220] ata9.00: failed command: READ DMA EXT
[  286.233228] ata9.00: cmd 25/00:10:10:5c:50/00:00:5d:01:00/e0 tag 26 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[  286.233232] ata9.00: status: { DRDY ERR }
[  286.233245] ata9.00: error: { ABRT }
[  286.233252] ata10.00: limiting speed to UDMA/100:PIO4
[  286.233254] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[  286.233255] ata10.00: irq_stat 0x40000001
[  286.233256] ata10.00: failed command: READ DMA EXT
[  286.233259] ata10.00: cmd 25/00:10:10:5c:50/00:00:5d:01:00/e0 tag 1 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[  286.233260] ata10.00: status: { DRDY ERR }
[  286.233261] ata10.00: error: { ABRT }
[  286.233262] ata10: hard resetting link
[  286.453824] ata9.00: configured for UDMA/133 (device error ignored)
[  286.454904] ata9: EH complete
[  286.469173] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  286.469179] ata9.00: irq_stat 0x40000001
[  286.469184] ata9.00: failed command: READ DMA EXT
[  286.469192] ata9.00: cmd 25/00:10:10:5c:50/00:00:5d:01:00/e0 tag 27 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[  286.469196] ata9.00: status: { DRDY ERR }
[  286.469199] ata9.00: error: { ABRT }
[  286.472690] ata9.00: configured for UDMA/133 (device error ignored)
[  286.473787] ata9: EH complete
[  286.485210] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  286.485214] ata9.00: irq_stat 0x40000001
[  286.485218] ata9.00: failed command: READ DMA EXT
[  286.485224] ata9.00: cmd 25/00:10:10:5c:50/00:00:5d:01:00/e0 tag 28 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[  286.485227] ata9.00: status: { DRDY ERR }
[  286.485229] ata9.00: error: { ABRT }
[  286.488712] ata9.00: configured for UDMA/133 (device error ignored)
[  286.489791] ata9: EH complete
[  286.501226] ata9.00: limiting speed to UDMA/100:PIO4
[  286.501229] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[  286.501233] ata9.00: irq_stat 0x40000001
[  286.501237] ata9.00: failed command: READ DMA EXT
[  286.501243] ata9.00: cmd 25/00:10:10:5c:50/00:00:5d:01:00/e0 tag 29 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[  286.501246] ata9.00: status: { DRDY ERR }
[  286.501248] ata9.00: error: { ABRT }
[  286.501252] ata9: hard resetting link
[  286.546666] ata10: SATA link up 6.0 Gbps (SStatus 133 SControl 310)
[  286.724819] ata10.00: failed to set xfermode (err_mask=0x1)
[  291.548047] ata10: hard resetting link
[  291.548117] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 310)
[  291.768616] ata9.00: failed to set xfermode (err_mask=0x1)
[  296.668046] ata9: hard resetting link
[  296.668114] ata10: SATA link up 6.0 Gbps (SStatus 133 SControl 310)
[  296.888622] ata10.00: failed to set xfermode (err_mask=0x1)
[  296.888631] ata10.00: limiting speed to UDMA/100:PIO3
[  301.788056] ata10: hard resetting link
[  301.788088] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 310)
[  302.008634] ata9.00: failed to set xfermode (err_mask=0x1)
[  302.008643] ata9.00: limiting speed to UDMA/100:PIO3
[  306.908060] ata9: hard resetting link
[  306.908128] ata10: SATA link up 6.0 Gbps (SStatus 133 SControl 310)
[  307.128638] ata10.00: failed to set xfermode (err_mask=0x1)
[  307.128646] ata10.00: disabled
[  307.130790] scsi_io_completion: 1 callbacks suppressed
[  307.130797] sd 9:0:0:0: [sdk] tag#1 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  307.130802] sd 9:0:0:0: [sdk] tag#1 Sense Key : Not Ready [current]
[  307.130805] sd 9:0:0:0: [sdk] tag#1 Add. Sense: Logical unit not ready, hard reset required
[  307.130811] sd 9:0:0:0: [sdk] tag#1 CDB: Read(16) 88 00 00 00 00 01 5d 50 5c 10 00 00 00 10 00 00
[  307.130812] blk_update_request: 1 callbacks suppressed
[  307.130815] blk_update_request: I/O error, dev sdk, sector 5860514832
[  307.130834] ata10: EH complete
[  307.130864] sd 9:0:0:0: [sdk] tag#5 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[  307.130868] sd 9:0:0:0: [sdk] tag#5 CDB: Read(16) 88 00 00 00 00 01 5d 50 5e 10 00 00 00 10 00 00
[  307.130869] blk_update_request: I/O error, dev sdk, sector 5860515344
[  307.131119] sd 9:0:0:0: [sdk] Read Capacity(16) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[  307.131120] sd 9:0:0:0: [sdk] Sense not available.
[  307.131340] sd 9:0:0:0: [sdk] Read Capacity(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[  307.131341] sd 9:0:0:0: [sdk] Sense not available.
[  307.222750] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 310)
[  307.226292] ata9.00: failed to set xfermode (err_mask=0x1)
[  307.226299] ata9.00: disabled
[  307.228473] sd 8:0:0:0: [sdj] tag#29 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  307.228478] sd 8:0:0:0: [sdj] tag#29 Sense Key : Not Ready [current]
[  307.228481] sd 8:0:0:0: [sdj] tag#29 Add. Sense: Logical unit not ready, hard reset required
[  307.228485] sd 8:0:0:0: [sdj] tag#29 CDB: Read(16) 88 00 00 00 00 01 5d 50 5c 10 00 00 00 10 00 00
[  307.228488] blk_update_request: I/O error, dev sdj, sector 5860514832
[  307.228508] ata9: EH complete
[  307.228533] sd 8:0:0:0: [sdj] tag#1 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[  307.228536] sd 8:0:0:0: [sdj] tag#1 CDB: Read(16) 88 00 00 00 00 01 5d 50 5e 10 00 00 00 10 00 00
[  307.228538] blk_update_request: I/O error, dev sdj, sector 5860515344
[  307.228621] sd 8:0:0:0: [sdj] Read Capacity(16) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[  307.228622] sd 8:0:0:0: [sdj] Sense not available.
[  307.228644] sd 8:0:0:0: [sdj] Read Capacity(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[  307.228645] sd 8:0:0:0: [sdj] Sense not available.
[  307.228673] sdj: detected capacity change from 3000592982016 to 0
[  307.228722] sd 8:0:0:0: [sdj] Read Capacity(16) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[  307.228723] sd 8:0:0:0: [sdj] Sense not available.
[  307.228959] sd 8:0:0:0: [sdj] Read Capacity(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[  307.228961] sd 8:0:0:0: [sdj] Sense not available.
[  307.699385] sd 9:0:0:0: [sdk] Read Capacity(16) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[  307.699388] sd 9:0:0:0: [sdk] Sense not available.
[  307.699604] sd 9:0:0:0: [sdk] Read Capacity(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[  307.699605] sd 9:0:0:0: [sdk] Sense not available.
[  307.699967] sd 8:0:0:0: [sdj] Read Capacity(16) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[  307.699968] sd 8:0:0:0: [sdj] Sense not available.
[  307.700044] sd 8:0:0:0: [sdj] Read Capacity(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[  307.700046] sd 8:0:0:0: [sdj] Sense not available.

[ZAH]

Jak jsi si jistý zdrojem, jak je starý atd. Tohle vypadá na HW. Možná konektory na řadiči, ale může to být prakticky cokoliv.

Možná ti to bude připadat jako šílenost , ale jestli jsou tam nějaké speciální SATA kabely vyndat a dát něco ze šuplíkových zásob. Vlastní zkušenost.

[Michal]

Tak panove (a damy? to asi ne... ), zahada skoro jiste vyresena; scrub po 10 hodinah dobehl a v logu zadne chyby. Kdybyste se s necim takovym v budoucnu setkali, tak... vymente napajeci molex->2x sata. WTF? jak mohla vadna napajeci rozdvojka se projevovat takhle? Kdyby se ten disk restartoval nebo narustal Power-Off_Retract_Count nebo Power_Cycle_Count tak by se to dalo poznat. A take, ze to zacalo delat z niceho nic. Zkratka - uz me asi nic neprekvapi

[dustin]

Tyhle rozdvojky jsou jedny z největších šmejdů v PC, co znám. Průměry pinů v molex samcovi jsou malé, piny se v konektoru viklají, jenom to do sebe zastrčit je problém. Vůbec mě nepřekvapuje, že to nemělo kontakt, nemá jej to celkem běžně. Navíc dráty jsou tenoučké licny o několika vláknech, víc než jeden dva disky to nedá. Do NASu ani náhodou. Nikde jsem neviděl, že by se prodávaly lepší, všichni vedou ten čínský humus (mám je z napřímo z Číny i od místních prodejců).

Doporučuji odstřihnout samičí molex od zdroje a normální čokoládou připojit kabel se SATA konektory ze starého zdroje, se standardními silnějšími licnami.

[Michal]

Pri zapojovani tohodle si vzdycky vzpomenu, proc jsem nemel rad molexy, staci zapojit dva a clovek ma rozdrbane prsty navic kdyz to ma nepruhledny konektor, tak clovek nikdy nevi, zda to je zatlacene az do konce. Me take neprekvapilo, ze muze byt tahle vec vadna; ja jen stale nemuzu uverit, ze se to projevovalo tak, jak se to projevovalo. Zjevne dokud se cetlo, tak bylo vse ok ale pri zapisu uz asi nezbyla stava a chcipla nejaka cast radice (cely ne protoze smart bezel kontinualne).

[dustin]

S molexy v koncových zařízeních nemám problém, někdy to jde ztuha, ale nikdy se neviklají (piny jsou přiletované rovnou na desce) a ještě se mi nestalo, aby neměly kontakt. Zato ty prodlužky jsou příšerné.

Klidně tam mohl být přechodový odpor a při nárůstu spotřeby zařízení náhodně vypadávaly.

Hlavně že jsi to objevil.

[pc2005]

Jo ty molexy jsou dost příšerný. Při zapojování jde špatně zastrčit všechny 4 piny a pak je to dost náchylné na otřesy. Ty piny navíc nejsou ani měď (něco se zinkem? pružnost to má hrozně špatnou), takže menší vodivost apod...

Ale pozor tohle taky může způsobovat slabej zdroj počítače. Tohle mi dělal můj seagate disk se slabým zdrojem. Výpadky, které se na chvíli odstranily rozpojením a zapojením molexů a sata power (setře se oxidovaná vrstva), ale po nějaké době se vrátily až z toho ten disk umřel.

BTW Co máš za disk, nemáš nějak velkej Load_Cycle_Count? Já na 1TB+2TB WD RE4 mám LCC na každejch 10 hodin Power_On_Hours (což zhruba odpovídá vypnutí počítače). U tebe to je jednou za hodinu. Parkování samozřejmě žere krátkodobě víc energie přes molex.

[Michal]

Je tam CoolerMaster Silent Pro 600W zdroj, ktery by podle klakulacky mel na i7 3930K + 8*8GB + 8*HDD + 4*SSD + 10Gbit sitovka + SATA radic + nejaka pasivne chlazena GK tusim GTX420 stacit. Takovy maly domaci NASik

Nejakou dobu jsem tam mel usinani disku, ted uz to nechavam tocit porad pac to nema smysl. Furt tam neco saha.

[dustin]

To je pořádně žravej domácí NASík

[Tomáš Bžatek]

Heh, pekne.

Otazka do budoucna: verit vic kablikum/molexum nebo radeji backplane v case/supliku pro hotswap disku?