Administrace komentářů

Ahoj,
potreboval bych poradit s problemovym hdd. Mam hdd(na zalohovani) s ntfs systemem, ktery se v systemu (win 7) po rebootu obcas neobjevi. Tak jsem ho vzal, dal do sveho PC (Debian) a pustil nad nim badblocks a smart.

U Smartu me zaujaly errory na konci vypisu a dale vystup badblocks, ktery je jasny.

Moje otazka zni:
jaky je podle vas "zdravotni stav" tohoto disku? Ptam se pac jsem ho koupil (uz pouzity) pred necelym tydnem a rad bych ho reklamoval (na to, ale samozrejme potrebuju mit podklady). Vysledky smartu a badblocks nize:

sudo smartctl -a /dev/sdb
smartctl 5.40 2010-07-12 r3124 [x86_64-unknown-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Caviar Blue Serial ATA family
Device Model:     WDC WD1600AAJS-00PSA0
Serial Number:    WD-WMAP92394010
Firmware Version: 05.06H05
User Capacity:    160 041 885 696 bytes
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   7
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Thu Mar 29 12:35:40 2012 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x84)	Offline data collection activity
					was suspended by an interrupting command from host.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		 (4200) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (  56) minutes.
Conveyance self-test routine
recommended polling time: 	 (   6) minutes.
SCT capabilities: 	       (0x103f)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   200   200   051    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0003   164   159   021    Pre-fail  Always       -       2758
  4 Start_Stop_Count        0x0032   099   099   000    Old_age   Always       -       1734
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000e   200   200   051    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   081   081   000    Old_age   Always       -       14227
 10 Spin_Retry_Count        0x0012   100   100   051    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0012   100   100   051    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   099   099   000    Old_age   Always       -       1721
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       42
193 Load_Cycle_Count        0x0032   200   200   000    Old_age   Always       -       1737
194 Temperature_Celsius     0x0022   098   096   000    Old_age   Always       -       45
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0012   200   200   000    Old_age   Always       -       1
198 Offline_Uncorrectable   0x0010   200   200   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0008   200   200   051    Old_age   Offline      -       0

SMART Error Log Version: 1
ATA Error Count: 84 (device log contains only the most recent five errors)
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 84 occurred at disk power-on lifetime: 14227 hours (592 days + 19 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 75 27 72 e1  Error: UNC at LBA = 0x01722775 = 24258421

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 70 27 72 01 00      00:42:29.362  READ DMA
  27 00 00 00 00 00 00 00      00:42:29.347  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 00 00      00:42:29.338  IDENTIFY DEVICE
  ef 03 46 00 00 00 00 00      00:42:29.331  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 00 00      00:42:29.331  READ NATIVE MAX ADDRESS EXT

Error 83 occurred at disk power-on lifetime: 14227 hours (592 days + 19 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 75 27 72 e1  Error: UNC at LBA = 0x01722775 = 24258421

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 70 27 72 01 00      00:42:26.665  READ DMA
  27 00 00 00 00 00 00 00      00:42:26.650  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 00 00      00:42:26.641  IDENTIFY DEVICE
  ef 03 46 00 00 00 00 00      00:42:26.634  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 00 00      00:42:26.634  READ NATIVE MAX ADDRESS EXT

Error 82 occurred at disk power-on lifetime: 14227 hours (592 days + 19 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 75 27 72 e1  Error: UNC at LBA = 0x01722775 = 24258421

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 70 27 72 01 00      00:42:23.976  READ DMA
  27 00 00 00 00 00 00 00      00:42:23.960  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 00 00      00:42:23.951  IDENTIFY DEVICE
  ef 03 46 00 00 00 00 00      00:42:23.944  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 00 00      00:42:23.944  READ NATIVE MAX ADDRESS EXT

Error 81 occurred at disk power-on lifetime: 14227 hours (592 days + 19 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 75 27 72 e1  Error: UNC at LBA = 0x01722775 = 24258421

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 70 27 72 01 00      00:42:21.286  READ DMA
  27 00 00 00 00 00 00 00      00:42:21.271  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 00 00      00:42:21.262  IDENTIFY DEVICE
  ef 03 46 00 00 00 00 00      00:42:21.255  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 00 00      00:42:21.255  READ NATIVE MAX ADDRESS EXT

Error 80 occurred at disk power-on lifetime: 14227 hours (592 days + 19 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 75 27 72 e1  Error: UNC at LBA = 0x01722775 = 24258421

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 70 27 72 01 00      00:42:18.593  READ DMA
  27 00 00 00 00 00 00 00      00:42:18.578  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 00 00      00:42:18.569  IDENTIFY DEVICE
  ef 03 46 00 00 00 00 00      00:42:18.562  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 00 00      00:42:18.562  READ NATIVE MAX ADDRESS EXT

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%     11134         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

sudo badblocks -v /dev/sdb1 -o disk_badblocks_verbose.txt
Ověřuji bloky 0 až 156287999
Hledám špatné bloky (test jen pro čtení): hotovo                                
Průchod dokončen, nalezeno 5 špatných bloků.

cat disk_badblocks_verbose.txt
12128128
12128184
12128185
12128186
12128187

Reklamovali byste disk byt na mem miste?