abclinuxu.cz AbcLinuxu.cz itbiz.cz ITBiz.cz HDmag.cz HDmag.cz abcprace.cz AbcPráce.cz
AbcLinuxu hledá autory!
Inzerujte na AbcPráce.cz od 950 Kč
Rozšířené hledání
Přihlášení | Registrace
×
napište » Zprávičky
inzerujte » Pracovní nabídky
    Visual Studio Code a VSCodium 1.100
    včera 19:22 | Nová verze

    Byla vydána (𝕏) dubnová aktualizace aneb nová verze 1.100 editoru zdrojových kódů Visual Studio Code (Wikipedie). Přehled novinek i s náhledy a videi v poznámkách k vydání. Ve verzi 1.100 vyjde také VSCodium, tj. komunitní sestavení Visual Studia Code bez telemetrie a licenčních podmínek Microsoftu.

    Ladislav Hagara | Komentářů: 0
    Home Assistant 2025.5
    včera 18:00 | Nová verze

    Open source platforma Home Assistant (Demo, GitHub, Wikipedie) pro monitorování a řízení inteligentní domácnosti byla vydána v nové verzi 2025.5.

    Ladislav Hagara | Komentářů: 0
    OpenSearch 3.0
    včera 01:22 | Nová verze

    OpenSearch (Wikipedie) byl vydán ve verzi 3.0. Podrobnosti v poznámkách k vydání. Jedná se o fork projektů Elasticsearch a Kibana.

    Ladislav Hagara | Komentářů: 0
    PyXL - Python procesor
    včera 00:55 | Zajímavý projekt

    PyXL je koncept procesora, ktorý dokáže priamo spúštat Python kód bez nutnosti prekladu ci Micropythonu. Podľa testov autora je pri 100 MHz približne 30x rýchlejší pri riadeni GPIO nez Micropython na Pyboard taktovanej na 168 MHz.

    vlk | Komentářů: 0
    Grafana 12.0
    7.5. 19:44 | Nová verze

    Grafana (Wikipedie), tj. open source nástroj pro vizualizaci různých metrik a s ní související dotazování, upozorňování a lepší porozumění, byla vydána ve verzi 12.0. Přehled novinek v aktualizované dokumentaci.

    Ladislav Hagara | Komentářů: 0
    Raspberry Pi OS 2025-05-06
    7.5. 17:33 | Nová verze

    Raspberry Pi OS, oficiální operační systém pro Raspberry Pi, byl vydán v nové verzi 2025-05-06. Přehled novinek v příspěvku na blogu Raspberry Pi a poznámkách k vydání. Pravděpodobně se jedná o poslední verzi postavenou na Debianu 12 Bookworm. Následující verze by již měla být postavena na Debianu 13 Trixie.

    Ladislav Hagara | Komentářů: 0
    Richard Stallman dnes v Liberci přednáší o svobodném softwaru a svobodě v digitální společnosti
    7.5. 05:33 | Komunita

    Richard Stallman dnes v Liberci přednáší o svobodném softwaru a svobodě v digitální společnosti. Od 16:30 v aule budovy G na Technické univerzitě v Liberci. V anglickém jazyce s automaticky generovanými českými titulky. Vstup je zdarma i pro širokou veřejnost.

    Ladislav Hagara | Komentářů: 17
    sudo-rs nahradí v Ubuntu 25.10 klasické sudo
    7.5. 03:55 | Komunita

    sudo-rs, tj. sudo a su přepsáné do programovacího jazyka Rust, nahradí v Ubuntu 25.10 klasické sudo. V plánu je také přechod od klasických coreutils k uutils coreutils napsaných v Rustu.

    Ladislav Hagara | Komentářů: 0
    Fedora oficiální distribucí WSL
    6.5. 22:11 | Nasazení Linuxu

    Fedora se stala oficiální distribucí WSL (Windows Subsystem for Linux).

    Ladislav Hagara | Komentářů: 2
    IBM LinuxONE Emperor 5
    6.5. 13:22 | IT novinky

    Společnost IBM představila server IBM LinuxONE Emperor 5 poháněný procesorem IBM Telum II.

    Ladislav Hagara | Komentářů: 1
    Centrum | Napsat | Starší
    navrhněte » Anketa
    Jaký filesystém primárně používáte?
     (57%)
     (1%)
     (8%)
     (22%)
     (4%)
     (2%)
     (3%)
     (1%)
     (1%)
     (3%)
    Celkem 560 hlasů
     Komentářů: 26, poslední včera 09:58
    Rozcestník
    AbcLinuxu
    HDmag.cz

    Administrace komentářů

    Jste na stránce určené pro řešení chyb a problémů týkajících se diskusí a komentářů. Můžete zde našim administrátorům reportovat špatně zařazenou či duplicitní diskusi, vulgární či osočující příspěvek a podobně. Děkujeme vám za vaši pomoc, více očí více vidí, společně můžeme udržet vysokou kvalitu AbcLinuxu.cz.

    Příspěvek
    15.10.2013 10:21 Tommy
    Rozbalit Rozbalit vše Problem s 3 dny starym diskem:-(
    Ahoj. Pred tydnem jsem tady resil, jaky mam koupit disk do RAID1. Nakonec jsem se rozhodl pro WD RED. Po třech dnech mi vypadl z RAIDu, nevidi ho ani fdisk a log mam plny techto hlasek: 
    [  891.721684]          res 40/00:1c:00:5b:38/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  891.726233] ata1.00: status: { DRDY }
[  891.728495] ata1.00: failed command: WRITE FPDMA QUEUED
[  891.730745] ata1.00: cmd 61/80:78:00:5a:38/00:00:00:00:00/40 tag 15 ncq 65536 out
[  891.730747]          res 40/00:1c:00:5b:38/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  891.735290] ata1.00: status: { DRDY }
[  891.737526] ata1: hard resetting link
[  892.336019] ata1: SATA link up unknown (SStatus 103 SControl 310)
[  892.336971] ata1.00: configured for UDMA/133
[  892.336991] ata1: EH complete
[  895.032839] ata1.00: exception Emask 0x10 SAct 0x1ff SErr 0x400000 action 0x6 frozen
[  895.033296] ata1.00: irq_stat 0x08000000, interface fatal error
[  895.035291] ata1: SError: { Handshk }
[  895.037539] ata1.00: failed command: WRITE FPDMA QUEUED
[  895.039776] ata1.00: cmd 61/00:00:80:0b:39/01:00:00:00:00/40 tag 0 ncq 131072 out
[  895.039778]          res 40/00:44:00:0d:39/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  895.044340] ata1.00: status: { DRDY }
[  895.046562] ata1.00: failed command: WRITE FPDMA QUEUED
[  895.048835] ata1.00: cmd 61/80:08:80:0c:39/00:00:00:00:00/40 tag 1 ncq 65536 out
[  895.048837]          res 40/00:44:00:0d:39/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  895.053363] ata1.00: status: { DRDY }
[  895.055598] ata1.00: failed command: WRITE FPDMA QUEUED
[  895.057873] ata1.00: cmd 61/00:10:00:03:39/04:00:00:00:00/40 tag 2 ncq 524288 out
[  895.057874]          res 40/00:44:00:0d:39/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  895.062434] ata1.00: status: { DRDY }
[  895.064663] ata1.00: failed command: WRITE FPDMA QUEUED
[  895.066912] ata1.00: cmd 61/00:18:00:07:39/03:00:00:00:00/40 tag 3 ncq 393216 out
[  895.066914]          res 40/00:44:00:0d:39/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  895.071451] ata1.00: status: { DRDY }
[  895.073697] ata1.00: failed command: WRITE FPDMA QUEUED
[  895.075953] ata1.00: cmd 61/80:20:00:0a:39/00:00:00:00:00/40 tag 4 ncq 65536 out
[  895.075954]          res 40/00:44:00:0d:39/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  895.080508] ata1.00: status: { DRDY }
[  895.082751] ata1.00: failed command: WRITE FPDMA QUEUED
[  895.085005] ata1.00: cmd 61/80:28:00:0e:39/00:00:00:00:00/40 tag 5 ncq 65536 out
[  895.085006]          res 40/00:44:00:0d:39/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  895.089548] ata1.00: status: { DRDY }
[  895.091772] ata1.00: failed command: WRITE FPDMA QUEUED
[  895.094042] ata1.00: cmd 61/80:30:80:0a:39/00:00:00:00:00/40 tag 6 ncq 65536 out
[  895.094044]          res 40/00:44:00:0d:39/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  895.098589] ata1.00: status: { DRDY }
[  895.100828] ata1.00: failed command: WRITE FPDMA QUEUED
[  895.103062] ata1.00: cmd 61/80:38:00:0b:39/00:00:00:00:00/40 tag 7 ncq 65536 out
[  895.103063]          res 40/00:44:00:0d:39/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  895.107626] ata1.00: status: { DRDY }
[  895.109864] ata1.00: failed command: WRITE FPDMA QUEUED
[  895.112123] ata1.00: cmd 61/00:40:00:0d:39/01:00:00:00:00/40 tag 8 ncq 131072 out
[  895.112125]          res 40/00:44:00:0d:39/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  895.116668] ata1.00: status: { DRDY }
[  895.118903] ata1: hard resetting link
[  895.600024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  900.600021] ata1.00: qc timeout (cmd 0xec)
[  900.600027] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[  900.600030] ata1.00: revalidation failed (errno=-5)
[  900.600476] ata1: hard resetting link
[  901.084017] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  911.084017] ata1.00: qc timeout (cmd 0xec)
[  911.084023] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[  911.084026] ata1.00: revalidation failed (errno=-5)
[  911.084476] ata1: hard resetting link
[  911.568016] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  911.568993] ata1.00: configured for UDMA/133
[  911.569008] ata1: EH complete
[  911.569045] ata1.00: exception Emask 0x10 SAct 0x3f SErr 0x1800000 action 0x6 frozen
[  911.569490] ata1.00: irq_stat 0x08000000, interface fatal error
[  911.571392] ata1: SError: { LinkSeq TrStaTrns }
[  911.573627] ata1.00: failed command: WRITE FPDMA QUEUED
[  911.575839] ata1.00: cmd 61/00:00:00:0d:39/01:00:00:00:00/40 tag 0 ncq 131072 out
[  911.575840]          res 40/00:0c:00:0b:39/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  911.580317] ata1.00: status: { DRDY }
[  911.582524] ata1.00: failed command: WRITE FPDMA QUEUED
[  911.584756] ata1.00: cmd 61/80:08:00:0b:39/00:00:00:00:00/40 tag 1 ncq 65536 out
[  911.584757]          res 40/00:0c:00:0b:39/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  911.589205] ata1.00: status: { DRDY }
[  911.591407] ata1.00: failed command: WRITE FPDMA QUEUED
[  911.593628] ata1.00: cmd 61/80:10:80:0a:39/00:00:00:00:00/40 tag 2 ncq 65536 out
[  911.593629]          res 40/00:0c:00:0b:39/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  911.598087] ata1.00: status: { DRDY }
[  911.600301] ata1.00: failed command: WRITE FPDMA QUEUED
[  911.602504] ata1.00: cmd 61/80:18:00:0e:39/00:00:00:00:00/40 tag 3 ncq 65536 out
[  911.602505]          res 40/00:0c:00:0b:39/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  911.606969] ata1.00: status: { DRDY }
[  911.609157] ata1.00: failed command: WRITE FPDMA QUEUED
[  911.611365] ata1.00: cmd 61/80:20:00:0a:39/00:00:00:00:00/40 tag 4 ncq 65536 out
[  911.611366]          res 40/00:0c:00:0b:39/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  911.615820] ata1.00: status: { DRDY }
[  911.618022] ata1.00: failed command: WRITE FPDMA QUEUED
[  911.620212] ata1.00: cmd 61/00:28:00:07:39/03:00:00:00:00/40 tag 5 ncq 393216 out
[  911.620214]          res 40/00:0c:00:0b:39/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  911.624627] ata1.00: status: { DRDY }
[  911.626818] ata1: hard resetting link
[  912.108019] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  917.108019] ata1.00: qc timeout (cmd 0xec)
[  917.108025] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[  917.108028] ata1.00: revalidation failed (errno=-5)
[  917.108471] ata1: hard resetting link
[  917.592019] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  917.593025] ata1.00: configured for UDMA/133
[  917.593042] ata1: EH complete
[  917.593127] ata1.00: exception Emask 0x10 SAct 0x1ff SErr 0x1c00000 action 0x6 frozen
[  917.593568] ata1.00: irq_stat 0x08000000, interface fatal error
[  917.595445] ata1: SError: { Handshk LinkSeq TrStaTrns }
[  917.597655] ata1.00: failed command: WRITE FPDMA QUEUED
[  917.599852] ata1.00: cmd 61/00:00:00:07:39/03:00:00:00:00/40 tag 0 ncq 393216 out
[  917.599853]          res 40/00:24:00:0b:39/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  917.604265] ata1.00: status: { DRDY }
[  917.606454] ata1.00: failed command: WRITE FPDMA QUEUED
[  917.608665] ata1.00: cmd 61/80:08:00:0a:39/00:00:00:00:00/40 tag 1 ncq 65536 out
[  917.608667]          res 40/00:24:00:0b:39/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  917.613086] ata1.00: status: { DRDY }
[  917.615274] ata1.00: failed command: WRITE FPDMA QUEUED
[  917.617489] ata1.00: cmd 61/80:10:00:0e:39/00:00:00:00:00/40 tag 2 ncq 65536 out
[  917.617490]          res 40/00:24:00:0b:39/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  917.621895] ata1.00: status: { DRDY }
[  917.624105] ata1.00: failed command: WRITE FPDMA QUEUED
[  917.626290] ata1.00: cmd 61/80:18:80:0a:39/00:00:00:00:00/40 tag 3 ncq 65536 out
[  917.626292]          res 40/00:24:00:0b:39/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  917.630722] ata1.00: status: { DRDY }
[  917.632948] ata1.00: failed command: WRITE FPDMA QUEUED
[  917.635118] ata1.00: cmd 61/80:20:00:0b:39/00:00:00:00:00/40 tag 4 ncq 65536 out
[  917.635120]          res 40/00:24:00:0b:39/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  917.639537] ata1.00: status: { DRDY }
[  917.641716] ata1.00: failed command: WRITE FPDMA QUEUED
[  917.643913] ata1.00: cmd 61/00:28:00:0d:39/01:00:00:00:00/40 tag 5 ncq 131072 out
[  917.643915]          res 40/00:24:00:0b:39/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  917.648336] ata1.00: status: { DRDY }
[  917.650517] ata1.00: failed command: WRITE FPDMA QUEUED
[  917.652735] ata1.00: cmd 61/00:30:00:03:39/04:00:00:00:00/40 tag 6 ncq 524288 out
[  917.652737]          res 40/00:24:00:0b:39/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  917.657140] ata1.00: status: { DRDY }
[  917.659315] ata1.00: failed command: WRITE FPDMA QUEUED
[  917.661532] ata1.00: cmd 61/80:38:80:0c:39/00:00:00:00:00/40 tag 7 ncq 65536 out
[  917.661533]          res 40/00:24:00:0b:39/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  917.665959] ata1.00: status: { DRDY }
[  917.668179] ata1.00: failed command: WRITE FPDMA QUEUED
[  917.670392] ata1.00: cmd 61/00:40:80:0b:39/01:00:00:00:00/40 tag 8 ncq 131072 out
[  917.670394]          res 40/00:24:00:0b:39/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  917.674850] ata1.00: status: { DRDY }
[  917.677075] ata1: hard resetting link
[  918.160018] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  918.160532] ata1.00: failed to set xfermode (err_mask=0x100)
[  923.160018] ata1: hard resetting link
[  923.644018] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  928.644017] ata1.00: qc timeout (cmd 0xec)
[  928.644023] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[  928.644026] ata1.00: revalidation failed (errno=-5)
[  928.644464] ata1: hard resetting link
[  929.128014] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  939.128017] ata1.00: qc timeout (cmd 0xec)
[  939.128023] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[  939.128026] ata1.00: revalidation failed (errno=-5)
[  939.128457] ata1.00: disabled
[  939.128478] ata1: hard resetting link
[  939.612016] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  939.612032] ata1: EH complete
[  939.612053] sd 0:0:0:0: [sda] Unhandled error code
[  939.612055] sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[  939.612058] sd 0:0:0:0: [sda] CDB: Write(10): 2a 00 00 39 0b 80 00 01 00 00
[  939.612066] end_request: I/O error, dev sda, sector 3738496
[  939.612472] raid1: Disk failure on sda2, disabling device.
[  939.612474] raid1: Operation continuing on 1 devices.
[  939.616545] sd 0:0:0:0: [sda] Unhandled error code
[  939.616547] sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[  939.616550] sd 0:0:0:0: [sda] CDB: Write(10): 2a 00 00 39 0c 80 00 00 80 00
[  939.616557] end_request: I/O error, dev sda, sector 3738752
[  939.618691] sd 0:0:0:0: [sda] Unhandled error code
[  939.618693] sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[  939.618696] sd 0:0:0:0: [sda] CDB: Write(10): 2a 00 00 39 03 00 00 04 00 00
[  939.618703] end_request: I/O error, dev sda, sector 3736320
[  939.620892] sd 0:0:0:0: [sda] Unhandled error code
[  939.620894] sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[  939.620897] sd 0:0:0:0: [sda] CDB: Write(10): 2a 00 00 39 0d 00 00 01 00 00
[  939.620904] end_request: I/O error, dev sda, sector 3738880
[  939.622856] sd 0:0:0:0: [sda] Unhandled error code
[  939.622859] sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[  939.622862] sd 0:0:0:0: [sda] CDB: Write(10): 2a 00 00 39 0b 00 00 00 80 00
[  939.622868] end_request: I/O error, dev sda, sector 3738368
[  939.624949] sd 0:0:0:0: [sda] Unhandled error code
[  939.624951] sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[  939.624954] sd 0:0:0:0: [sda] CDB: Write(10): 2a 00 00 39 0a 80 00 00 80 00
[  939.624961] end_request: I/O error, dev sda, sector 3738240
[  939.626995] sd 0:0:0:0: [sda] Unhandled error code
[  939.626997] sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[  939.627000] sd 0:0:0:0: [sda] CDB: Write(10): 2a 00 00 39 0e 00 00 00 80 00
[  939.627007] end_request: I/O error, dev sda, sector 3739136
[  939.629048] sd 0:0:0:0: [sda] Unhandled error code
[  939.629050] sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[  939.629053] sd 0:0:0:0: [sda] CDB: Write(10): 2a 00 00 39 0a 00 00 00 80 00
[  939.629059] end_request: I/O error, dev sda, sector 3738112
[  939.631057] sd 0:0:0:0: [sda] Unhandled error code
[  939.631059] sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[  939.631062] sd 0:0:0:0: [sda] CDB: Write(10): 2a 00 00 39 07 00 00 03 00 00
[  939.631068] end_request: I/O error, dev sda, sector 3737344
[  939.633079] sd 0:0:0:0: [sda] Unhandled error code
[  939.633081] sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[  939.633084] sd 0:0:0:0: [sda] CDB: Write(10): 2a 00 00 39 0e 80 00 04 00 00
[  939.633091] end_request: I/O error, dev sda, sector 3739264
[  939.635040] sd 0:0:0:0: [sda] Unhandled error code
[  939.635042] sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[  939.635045] sd 0:0:0:0: [sda] CDB: Write(10): 2a 00 e8 da 7d 00 00 00 08 00
[  939.635052] end_request: I/O error, dev sda, sector 3906632960
[  939.636914] end_request: I/O error, dev sda, sector 3906632960
[  939.638793] md: super_written gets error=-5, uptodate=0
[  939.639088] md: md1: recovery done.
[  939.639523] sd 0:0:0:0: [sda] READ CAPACITY(16) failed
[  939.639526] sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[  939.639529] sd 0:0:0:0: [sda] Sense not available.
[  939.639551] sd 0:0:0:0: [sda] READ CAPACITY failed
[  939.639553] sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[  939.639556] sd 0:0:0:0: [sda] Sense not available.
[  939.639587] sd 0:0:0:0: [sda] Asking for cache data failed
[  939.640681] sd 0:0:0:0: [sda] Assuming drive cache: write through
[  939.642601] sda: detected capacity change from 2000398934016 to 0
[  939.870509] RAID1 conf printout:
[  939.870513]  --- wd:1 rd:2
[  939.870517]  disk 0, wo:1, o:0, dev:sda2
[  939.870520]  disk 1, wo:0, o:1, dev:sdb2
[  939.870522] RAID1 conf printout:
[  939.870523]  --- wd:1 rd:2
[  939.870525]  disk 1, wo:0, o:1, dev:sdb2
[ 1178.273762] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ 1178.285951] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ 1178.285992] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ 1178.286005] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ 1238.132096] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ 1238.132122] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ 1238.132138] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ 1238.132150] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ 1298.354097] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ 1298.354122] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ 1298.354137] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ 1298.354148] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ 1598.277466] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ 1598.277491] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ 1598.277506] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ 1598.277517] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ 1829.752018] [drm] nouveau 0000:00:12.0: Setting dpms mode 1 on vga encoder (output 0)
[ 1897.954560] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ 1897.954585] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ 1897.954600] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ 1897.954612] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ 2198.089138] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ 2198.089163] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ 2198.089178] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ 2198.089190] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
    Je problem opravdu s diskem nebo to muze byt deskou (radicem)? Ale na te same mam puvodni Seagate a ten jede /zatim/ v pohode. Mam ho reklamovat?

    Diky moc.

    V tomto formuláři můžete formulovat svou stížnost ohledně příspěvku. Nejprve vyberte typ akce, kterou navrhujete provést s diskusí či příspěvkem. Potom do textového pole napište důvody, proč by měli admini provést vaši žádost, problém nemusí být patrný na první pohled. Odkaz na příspěvek bude přidán automaticky.

    Vaše jméno
    Váš email
    Typ požadavku
    Slovní popis
    Píšeme jinde
    ISSN 1214-1267   www.czech-server.cz
    Redakce | Inzerce | Podmínky použití | Osobní údaje
    © 1999-2015 Nitemedia s. r. o. Všechna práva vyhrazena.