Dotaz: Znovu ATI - Radeon 9000 (R250)

[wifinista]

Už se několik měsíců pokouším rozchodit 3D akceleraci pod ati na distribuci Gentoo, zkomplikoval jsem si to asi i o to víc, že jsem zkoušel DRI a i originální ati drivery. Nyní mám v systému ati-driver-8.23.7.

---

glxinfo:

name of display: :0.0
display: :0  screen: 0
direct rendering: No
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
    GLX_ARB_multisample, GLX_EXT_visual_info, GLX_EXT_visual_rating,
    GLX_EXT_import_context, GLX_OML_swap_method, GLX_SGI_make_current_read,
    GLX_SGIS_multisample, GLX_SGIX_fbconfig
client glx vendor string: ATI
client glx version string: 1.3
client glx extensions:
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context,
    GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_ATI_pixel_format_float,
    GLX_ATI_render_texture
GLX extensions:
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context,
    GLX_ARB_multisample
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.2 (1.5 Mesa 6.2.1)
OpenGL extensions:
    GL_ARB_imaging, GL_ARB_multitexture, GL_ARB_texture_border_clamp,
    GL_ARB_texture_cube_map, GL_ARB_texture_env_add,
    GL_ARB_texture_env_combine, GL_ARB_texture_env_dot3,
    GL_ARB_transpose_matrix, GL_EXT_abgr, GL_EXT_blend_color,
    GL_EXT_blend_minmax, GL_EXT_blend_subtract, GL_EXT_texture_env_add,
    GL_EXT_texture_env_combine, GL_EXT_texture_env_dot3,
    GL_EXT_texture_lod_bias
glu version: 1.3
glu extensions:
    GLU_EXT_nurbs_tessellator, GLU_EXT_object_space_tess

   visual  x  bf lv rg d st colorbuffer ax dp st accumbuffer  ms  cav
 id dep cl sp sz l  ci b ro  r  g  b  a bf th cl  r  g  b  a ns b eat
----------------------------------------------------------------------
0x23 16 tc  0 16  0 r  y  .  5  6  5  0  0 16  0  0  0  0  0  1 0 None
0x24 16 tc  0 16  0 r  y  .  5  6  5  0  0 16  8 16 16 16  0  1 0 None
0x25 16 tc  0 24  0 r  y  .  5  6  5  8  0 16  8 16 16 16 16  1 0 None
0x26 16 tc  0 24  0 r  .  .  5  6  5  8  0 16  8 16 16 16 16  1 0 None
0x27 16 dc  0 16  0 r  y  .  5  6  5  0  0 16  0  0  0  0  0  1 0 None
0x28 16 dc  0 16  0 r  y  .  5  6  5  0  0 16  8 16 16 16  0  1 0 None
0x29 16 dc  0 24  0 r  y  .  5  6  5  8  0 16  8 16 16 16 16  1 0 None
0x2a 16 dc  0 24  0 r  .  .  5  6  5  8  0 16  8 16 16 16 16  1 0 None

---

Něco z xorg.conf

Section "Module"
        Load  "extmod"
        Load  "dri"
        Load  "dbe"
        Load  "record"
        Load  "xtrap"
        Load  "glx"
        Load  "type1"
        Load  "freetype"
        Load  "speedo"
        Load  "GLcore"
EndSection

...

Section "Device"
        Identifier  "Card0"
        Driver      "ati"
        VendorName  "ATI Technologies Inc"
        BoardName   "Radeon RV250 If [Radeon 9000]"
        BusID       "PCI:1:0:0"
EndSection

---

# lspci | grep VGA
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon RV250 If [Radeon 9000] (rev 01)

a nakonec /var/log/Xorg.0.log zde

Odpovědi

[Jix0]

a co zkusit treba "fglrx" drivery od vyrobce? to musi fungovat.

[wifinista]

Zkusil jsem to, ale hodilo to nějakou chybu a Xka nenajely... fglrx tam očividně mam alě mely nějaký kecy s R200

[wifinista]

zde je log i s tou chybou (uplně nakonci)

[W/R]

ja tam vidim tenhle problem:

(EE) fglrx(0): Given depth (8) is not supported by fglrx driver
(EE) fglrx(0): PreInitVisual failed
SetVBEMode failed

Zkus si nastavit DefaultDepth 24, nebo odmaz sekce, ktery maji hloubku 8, 16 a 32 a nech si jenom tu 24 (24 je tusim jedina, ktera je na ATI podporovana driverem fglrx). Dalsi informace viz man xorg.conf

[W/R]

ati.com, FAQ pro linuxovy ovladac

Q9: What colour modes are currently supported?

A9: 24-bit True Colour is currently the only native colour mode for the ATI Proprietary Linux Driver. 8-bit colour can be achieved using the pseudo-colour visuals feature, but may not work in all applications. 16-bit colour is not supported; if any of your critical applications require 16-bit colour, you should not install the ATI Proprietary Linux Driver.

[msk]

Teraz neviem, co si mam o tych driveroch mysliet po tom, co som precital tento bod. To je taky hardcore podporovat viac farebnych hlbok v X-och? Alebo je to neschopnostou / neochotou ATI?

[wifinista]

Tak uz je to OK, pustil jsem nějakej ati konfigurátor a ten si upravil xorg.conf takže fglrx už jde, ovšem opengl i nadále nikoliv.

 ./cube_unix
init: sdl
init: net
init: world
game mode is ffa/default
init: video: sdl
init: video: mode
Unable to create OpenGL screen (X11 driver not configured with OpenGL)

taky se mi tam objevilo nějaký ati klikátko a to hází tohle A to nejduležitější z /var/log je zde. Ale tam se mi vůbec nelíbí tohle:

(WW) fglrx(0): ***********************************************
(WW) fglrx(0): * DRI initialization failed!                  *
(WW) fglrx(0): * (maybe driver kernel module missing or bad) *
(WW) fglrx(0): * 2D acceleraton available (MMIO)             *
(WW) fglrx(0): * no 3D acceleration available                *
(WW) fglrx(0): ********************************************* *

[W/R]

No, hele, tu posledni hlasku mi to hazelo taky a mam takovej dojem (na 99,5%), ze mi zmizela (a direct rendering zacal chodit) po tom, co jsem udelal eselect opengl set ati (nebo starsi verze opengl-update ....) proste nastavit pouzivani OpenGL na ATI verzi. Nez to prepnes, tak to pouziva xorg verzi, coz by mohl byt ten problem.

[wifinista]

Já to ale hold takový jednoduchý nemam

[michich]

(WW) RADEON(0): [agp] AGP not available
(EE) RADEON(0): [agp] AGP failed to initialize. Disabling the DRI.
(II) RADEON(0): [agp] You may want to make sure the agpgart kernel module
is loaded before the radeon kernel module.

Máte načtený modul agpgart a k němu správný AGP modul pro Váš čipset (třeba intel_agp, via_agp,...) ?

[pol128]

Pre tento model stačí ovládač radeon v X. V kerneli je potrebné zakompilovať agpgart s podporou príslušného chipsetu na doske a dri interface s podporou radeonu. V xorg.cong potom nastaviť driver radeon.

[Dworkin]

Dobry den, mam stejnou kartu a rendering mi chodi. (notebook IBM ThinkPad t41) Nastaveni mam takoveto:

kernel: CONFIG_AGP=y (character devices --> /dev/agpart (y) )

naopak vypnuta musi byt podpora pro Direct Render Manager (character devices --> Direct Render Manager..DRI support () )

Xconf ten jsem si vytvoril pomoci jiste utility tusim fglrxconfig prilozene k ovladacum od ati. Ale protoze tento config jiz mam dlouho tak nevim zda tam ta utilita jete je.

Section "Device"
    Identifier                          "ATI Graphics Adapter"
    Driver                              "fglrx"
# ### generic DRI settings ###
# === disable PnP Monitor  ===
    #Option                              "NoDDC"
# === disable/enable XAA/DRI ===
    Option "no_accel"                   "no"
    Option "no_dri"                     "no"
# === misc DRI settings ===
    Option "mtrr"                       "off" # disable DRI mtrr mapper, driver has its own code for mtrr
# ### FireGL DDX driver module specific settings ###
# === Screen Management ===
    Option "DesktopSetup"               "0x00000100"
    Option "MonitorLayout"              "AUTO, NONE"
    Option "IgnoreEDID"                 "off"
    Option "HSync2"                     "unspecified"
    Option "VRefresh2"                  "unspecified"
    Option "ScreenOverlap"              "0"
# === TV-out Management ===
    Option "NoTV"                       "no"
    Option "TVStandard"                 "PAL-B"
    Option "TVHSizeAdj"                 "0"
    Option "TVVSizeAdj"                 "0"
    Option "TVHPosAdj"                  "0"
    Option "TVVPosAdj"                  "0"
    Option "TVHStartAdj"                "0"
    Option "TVColorAdj"                 "0"
    Option "GammaCorrectionI"           "0x00000000"
    Option "GammaCorrectionII"          "0x00000000"
# === OpenGL specific profiles/settings ===
    Option "Capabilities"               "0x00000000"
# === Video Overlay for the Xv extension ===
    Option "VideoOverlay"               "on"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
#       will be disabled automatically
    Option "OpenGLOverlay"              "off"
# === Center Mode (Laptops only) ===
    Option "CenterMode"                 "off"
# === Pseudo Color Visuals (8-bit visuals) ===
    Option "PseudoColorVisuals"         "off"
# === QBS Management ===
    Option "Stereo"                     "off"
    Option "StereoSyncEnable"           "1"
# === FSAA Management ===
    Option "FSAAEnable"                 "no"
    Option "FSAAScale"                  "1"
    Option "FSAADisableGamma"           "no"
    Option "FSAACustomizeMSPos"         "no"
    Option "FSAAMSPosX0"                "0.000000"
    Option "FSAAMSPosY0"                "0.000000"
    Option "FSAAMSPosX1"                "0.000000"
    Option "FSAAMSPosY1"                "0.000000"
    Option "FSAAMSPosX2"                "0.000000"
    Option "FSAAMSPosY2"                "0.000000"
    Option "FSAAMSPosX3"                "0.000000"
    Option "FSAAMSPosY3"                "0.000000"
    Option "FSAAMSPosX4"                "0.000000"
    Option "FSAAMSPosY4"                "0.000000"
    Option "FSAAMSPosX5"                "0.000000"
    Option "FSAAMSPosY5"                "0.000000"
# === Misc Options ===
    Option "UseFastTLS"                 "0"
    Option "BlockSignalsOnLock"         "on"
    Option "UseInternalAGPGART"         "yes"
    Option "ForceGenericCPU"            "no"
    BusID "PCI:1:0:0"    # vendor=1002, device=4c66
    Screen 0
EndSection

[midar]

Mas vyply v kernelu DRM?

[wifinista]

jj, to mam

[wifinista]

Řešení

Nejprve jsem musel upravit symbolické odkaz /usr/src/linux na nejnovější kernel a potom stačilo spustit emerge ati-driver

Teď mam ale jinej problém a tím je:

supertux
Datadir: /usr/share/games/supertux
Warning: No joysticks are available.

Warning: I could not set up fullscreen video for 640x480 mode.
The Simple DirectMedia error that occured was:
X11 driver not configured with OpenGL

Fatal signal: Segmentation Fault (SDL Parachute Deployed)

pad nastal pri prepnuti na OpenGL

[wifinista]

Tak uz i tohle je vyreseny... stacilo prekompilovat libsdl