Dotaz: trable so slackware po prechode na 2.6.x kernel

[jose17]

Zdravim,

od doby kedy som vymenil distribucne jadro 2.4.32 za 2.6ku z testing/ a ostatne balicky aktualizovat na -current, nejde mi skompilovat ani jedna aplikacia. na radu tvorcu slackware som kernel headers neaktualizoval, nechal som 2.4.x.

najcastejsie sa teraz stretavam s chybovou hlaskou:

checking how to run the C preprocessor... /lib/cpp
configure: error: C preprocessor "/lib/cpp" fails sanity check

v config.log potom najdem:

/usr/lib/gcc/i486-slackware-linux/3.4.6/include/limits.h:122:61: limits.h: No such file or di
configure:4193: $? = 1

zaujimave na tom je to, ze limits.h v prislusnom adresari existuje. to sa stava aj pri inych hlavickovych suboroch. v systeme existuju, ale make/configure ich proste nevidi. poradite mi prosim niekto, co s tym mam robit? diky, jose

Odpovědi

[Michal Wirth]

odpoved na vasi otazku neznam, ale muzu rict, ze slackware 10.2 provozuji uspesne na vlastnorucne zkompilovanem jadre (nyni ve verzi 2.6.16), ktere jsem kompiloval prave z vami zminovane verze distribucniho jadra z testing adresare, vse bezi bez nejmensiho problemu, drzim palce

[stativ]

Mas balicek gcc-g++-3.4.6-i486-1?

Mimochodem, na strankach slacku je v current gcc-3.4.5 a ty mas gcc-3.4.6 neni to vlastni kompilace?

[jose17]

Mas balicek gcc-g++-3.4.6-i486-1?

pozriem doma, ale mari sa mi, ze mam.

Mimochodem, na strankach slacku je v current gcc-3.4.5 a ty mas gcc-3.4.6 neni to vlastni kompilace?

nie, vlastna kompilacia to nie je. na stiahnutie balickov som pouzil kslackcheck, ze by bol tuto pes zakopany?

Pokusim sa teraz problem popisat podrobnejsie. Kompilujem program c. 1 - dd_rescue 1.11. make vyhodi tuto zaujimavu chybovu hlasku:

/usr/include/asm/signal.h:27: error: conflicting types for 'sigset_t'
/usr/include/sys/select.h:38: error: previous declaration of 'sigset_t' was here

prvy zmieneny subor pochadza z baliku kernel-headers-2.4.32-i386-1 (5197 B), druhy (4156 B) z glibc-2.3.6-i486-3. dalsi testovany program moc hlasi tiez zaujimave veci:

checking fcntl.h presence... yes
configure: WARNING: fcntl.h: present but cannot be compiled
configure: WARNING: fcntl.h:     check for missing prerequisite headers?
configure: WARNING: fcntl.h: see the Autoconf documentation
configure: WARNING: fcntl.h:     section "Present But Cannot Be Compiled"
configure: WARNING: fcntl.h: proceeding with the preprocessor's result
configure: WARNING: fcntl.h: in the future, the compiler will take precedence
configure: WARNING:     ## ------------------------------ ##
configure: WARNING:     ## Report this to daper@daper.net ##
configure: WARNING:     ## ------------------------------ ##
checking for fcntl.h... yes
checking for string.h... (cached) yes
checking for strings.h... (cached) yes
checking sys/param.h usability... no
checking sys/param.h presence... no
checking for sys/param.h... no
configure: error: Can't find required header files.

v systeme pritom subor /usr/include/sys/param.h existuje (sucast baliku glibc-2.3.6-i486-3).

xmms-crossfade:

checking for glib-config... /usr/bin/glib-config
checking for GLIB - version >= 1.2.7... no
*** Could not run GLIB test program, checking why...
*** The test program compiled, but did not run. This usually means
*** that the run-time linker is not finding GLIB or finding the wrong
*** version of GLIB. If it is not finding GLIB, you'll need to set your
*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point
*** to the installed location  Also, make sure you have run ldconfig if that
*** is required on your system
***
*** If you have an old version installed, it is best to remove it, although
*** you may also be able to get things to work by modifying LD_LIBRARY_PATH
***
*** If you have a RedHat 5.0 system, you should remove the GTK package that
*** came with the system with the command
***
***    rpm --erase --nodeps gtk gtk-devel
configure: error: *** GLIB >= 1.2.7 not installed - please install first ***

glib-config --version hlasi verziu 1.2.10, takze som z toho volajako zmateny. prosim napada Vas nieco? alebo ake dalsie informacie mam poskytnut? v systeme mam inak este par svojich balickov, ale tie neobsahuju ziadne zasadne veci typu glibc. diky, jose

[jose17]

Mas balicek gcc-g++-3.4.6-i486-1?

Mimochodem, na strankach slacku je v current gcc-3.4.5 a ty mas gcc-3.4.6 neni to vlastni kompilace?

v currente je od 13. marca 2006 gcc-g++-3.4.6-i486-1.tgz: http://slackware.at/data/slackware-current/slackware/d/.

[jose17]

pridávam listing /var/log/packages

a2ps-4.13b-i386-2
aaa_base-10.2.0-noarch-4
aaa_elflibs-10.2.0-i486-3
aalib-1.4rc5-i386-1
alsa-driver-1.0.11_2.6.16.9-i486-1
alsa-lib-1.0.11rc4-i486-1
alsa-oss-1.0.11-i486-1
alsa-utils-1.0.11-i486-1
apmd-3.0.2-i386-1
aspell-0.60.2-i486-2
at-3.1.8-i486-2
atk-1.10.3-i486-1
audiofile-0.2.6-i486-1
aumix-2.8-i486-1
autoconf-2.59-noarch-1
automake-1.9.6-noarch-1
bash-3.1.014-i486-1
bc-1.06-i486-3
bin-10.2-i486-1
bin86-0.16.15-i486-1
bind-9.3.2-i486-3
binutils-2.15.92.0.2-i486-3
bison-2.1-i486-1
byacc-1.9-i386-1
bzip2-1.0.3-i486-2
catdoc-0.94-i386-1
ccache-2.4-i486-1
centericq-4.20.0-i486-1pin
coreutils-5.94-i486-2
cpio-2.5-i386-1
Cstools-3.42-i386-1
cups-1.1.23-i486-2
cvs-1.11.21-i486-1
cxxlibs-6.0.3-i486-1
cyrus-sasl-2.1.21-i486-1
db31-3.1.17-i486-1
db3-3.3.11-i486-4
db4-4.2.52-i486-2
dcron-2.3.3-i486-5
devs-2.3.1-noarch-22
dhcpcd-2.0.1-i486-1
diffutils-2.8.1-i386-1
dockapp-0.6.0RC2-i386-1
e2fsprogs-1.38-i486-2
elvis-2.2_0-i486-2
espgs-8.15.1-i486-1
etc-5.1-noarch-11
expat-1.95.8-i486-1
fbpager-0.1.4-i386-1
feh-1.3.4-i386-1
findutils-4.2.27-i486-1
flex-2.5.4a-i486-3
floppy-5.4-i386-3
fluxbox-0.9.15.1-i486-1
fluxter-0.1.0-i386-1
fribidi-0.10.5-i486-1
gawk-3.1.5-i486-2
gcc-3.4.6-i486-1
gcc-g++-3.4.6-i486-1
gdb-6.4-i486-1
gdbm-1.8.3-i486-3
gdk-pixbuf-0.22.0-i486-1
getmail-4.6.0-noarch-1
gettext-0.14.5-i486-1
gettext-tools-0.14.5-i486-1
gimp-2.2.11-i486-1
gkrellm-2.2.7-i486-1
glib-1.2.10-i386-2
glib2-2.8.6-i486-1
glibc-2.3.6-i486-3
glibc-solibs-2.3.6-i486-3
glibc-zoneinfo-2.3.6-noarch-3
glut-3.7-i486-1
gmp-4.1.4-i486-3
gnet-2.0.7-i486-3
gnu-gs-fonts-6.0-noarch-1
gpm-1.20.1-i486-1
gqview-2.1.1-i386-1
grep-2.5-i386-2
groff-1.19.2-i486-1
gtk+-1.2.10-i386-3
gtk+2-2.8.17-i486-1
guile-1.8.0-i486-1
gv-3.5.8-i386-1
gzip-1.3.3-i386-2
hdparm-6.1-i486-1
hotplug-2004_09_23-noarch-6
htop-0.6-i386-1
checkinstall-1.5.3-i486-2
imagemagick-6.2.7_0-i486-1
imlib-1.9.15-i486-1
imlib2-1.2.0.2-i486-1ph
inetd-1.79s-i486-7
infozip-5.52-i486-1
iproute2-2.6.15_060110-i486-1
iptables-1.3.5-i486-1
jose-apps
jose-catdoc
jose-cstools
jose-dockapp
jose-fbpager
jose-feh
jose-fluxter
jose-htop
jose-imlib2
jose-libical
jose-o3read
jose-ppthtml
kbd-1.12-i486-2
kernel-generic-2.6.16.9-i486-1
kernel-headers-2.4.32-i386-1
kernel-modules-2.6.16.9-i486-1
kslackcheck-3.3-noarch-3
less-382-i486-1
lesstif-0.94.4-i486-1
libao-0.8.6-i486-1
libart_lgpl-2.3.17-i486-1
libcaca-0.9-i486-2
libexif-0.6.13-i486-1
libglade-2.5.1-i486-1
libgsf-1.14.0-i486-1
libgtkhtml-2.6.3-i486-1
libical-0.23-i386-1
libid3tag-0.15.1b-i486-1
libidl-0.8.6-i486-1
libidn-0.6.3-i486-1
libieee1284-0.2.10-i486-1
libjpeg-6b-i386-4
libmad-0.15.1b-i486-1
libmikmod-3.1.11a-i486-1
libmng-1.0.5-i486-1
libogg-1.1.3-i486-1
libpng-1.2.8-i486-1
librsvg-2.14.3-i486-1
libtermcap-1.2.3-i486-6
libtiff-3.8.2-i486-1
libtool-1.5.22-i486-1
libungif-4.1.4-i486-2
libusb-0.1.8-i486-1
libvorbis-1.1.2-i486-1
libwmf-0.2.8.3-i486-1
libwpd-0.8.4-i486-2
libwww-5.4.0-i686-1
libxml2-2.6.23-i486-1
libxslt-1.1.15-i486-1
lilo-22.5.9-i486-2
links-2.1pre20-i486-1
logrotate-3.6.8-i486-1
lsof-4.76-i486-1
lynx-2.8.5rel.5-i486-2
m4-1.4.4-i486-1
make-3.81-i486-1
man-1.6c-i486-2
man-pages-2.22-noarch-1
mc-4.6.1-i486-1
metamail-2.7-i486-2
mhash-0.9.2-i486-1
mkinitrd-1.0.1-i486-3
module-init-tools-3.2.2-i486-1
mozilla-firefox-1.5.0.2-i686-1
MPlayer-1.0pre7try2-i386-1
mrxvt-0.5.0-i386-1
mutt-1.4.2.1i-i486-2
nail-11.25-i486-1
ncurses-5.5-i486-1
netpbm-10.18.12-i486-1
netwatch-1.0a-i386-1
nmap-4.00-i486-1
normalize-0.7.6-i486-1
o3read-0.0.4-i386-1
openssh-4.3p1-i486-1
openssl-0.9.8a-i486-1
openssl-solibs-0.9.8a-i486-1
pango-1.10.4-i486-1
pciutils-2.1.11-i486-6
pcmcia-cs-3.2.8-i486-1
pcre-6.4-i486-2
perl-5.8.8-i486-1
pidentd-3.0.19-i486-1
pkgconfig-0.20-i486-1
pkgtools-10.2.0-i486-6
pmake-2.1.35-i386-2
popa3d-1.0.1-i486-1
popt-1.7-i386-1
portmap-5.0-i486-1
procmail-3.22-i486-1
procps-3.2.6-i486-1
python-2.4.3-i486-1
qt-3.3.6-i486-1
readline-5.1-i486-1
rpm-4.2.1-i486-3
rp-pppoe-3.8-i486-1
rsync-2.6.7-i486-1
rxvt-2.7.10-i486-2
rzip-2.1-i486-1
screen-4.0.2-i486-1
sdl-1.2.9-i486-2
sed-4.1.5-i486-1
sgml-tools-1.0.9-i486-12
shadow-4.0.3-i486-11
shared-mime-info-0.16-i486-1
slang-1.4.9-i486-1
slocate-3.1-i486-1
sox-12.17.9-i486-1
startup-notification-0.8-i486-1
strace-4.5.14-i486-1
stunnel-4.15-i486-2
sysklogd-1.4.1-i486-9
syslinux-2.13-i486-1
sysvinit-2.84-i486-56
t1lib-5.1.0-i486-1
taglib-1.4-i486-2
tar-1.15.1-i486-1
tcl-8.4.11-i486-1
tclx-8.3.5-i486-2
tcpdump-3.9.4-i486-2
tcpip-0.17-i486-36
tcsh-6.14.00-i486-2
texinfo-4.8-i486-1
tix-8.1.4-i486-2
tk-8.4.11-i486-1
traceroute-1.4a12-i386-2
trn-3.6-i386-1
udev-071-i486-1
units-1.85-i486-1mu
utempter-1.1.3-i486-1
util-linux-2.12r-i486-1
vim-6.3.086-i486-1
vorbis-tools-1.1.1-i486-2
wget-1.10.2-i486-2
whois-4.7.11-i486-1
wine-0.9.7-i486-S10.2
wv2-0.2.2-i486-2
x11-6.9.0-i486-3
x11-devel-6.9.0-i486-3
x11-fonts-misc-6.9.0-noarch-3
x11-fonts-scale-6.9.0-noarch-3
xaw3d-1.5-i386-3
xine-lib-1.1.1-i686-1
xine-ui-0.99.4-i686-2
xlhtml-ppthtml-0.5.1-i486-1McD
xmms-1.2.10-i486-3
xmms-crossfade-0.3.6-i686-1
xpdf-3.01-i486-3
zlib-1.2.3-i486-1

[jose17]

hmm, vyriešené. z neznámeho dôvodu sa neprepísali súbory z balíka glibc. rovnako som preinštaloval kernel-headers a už si to valí tak ako má. díky všetkým.