Dotaz: Auto alsaconf ISA zvukovky

[Martin]

Zdrvím vespolek,
mám takový menší problém... Dostal jsem do ruky mou první ISA kartu, je to zvukovka (sb16), tak sem ji zapasoval do jednoho stroje s Debian sarge (jádro 2.6.8-2). Spustil jsem na něm detekci pnpdump --outputfile=/etc/isapnp.conf pak sem ji zapnul isapnp /etc/isapnp.conf. Ted už tyto kody davat po každém startu nemusím, ale problém je s alsou, kde jsme nucen po každém startu PC spustit alsaconf a projet průvodce. Já bych to ale chtěl udělat tak aby se to všechno nastavilo automaticky.
Nevíte kde bych to měl co udělat?

Odpovědi

[kozzi]

no ja kdyz jsem pouzival alsaconf tak se mi nastavilo myslim neco v /etc/modprobe.conf a po kazdem startu mi to slo a nemusel jsem to znovu spoustet.

[Martin]

No ono se něco nastavilo ale /etc/modprobe.conf nemám. Maximalne /etc/modules.conf měl bych vytvořit symlink ?

[kozzi]

ono je to tak modprobe.conf je pro jadra rady 2.6.x a modules.conf je pro jadra rady 2.4.x takze ten symlink klidne vytvorte. Ono to mozna muze byt necim jinym protoze debian ma vzdicky neco extra . jeste my sem hodte to co je v tom /etc/modules.conf

[Martin]

Zajímalo by mě taky jestli je potřeba zavádět tolik zvukových modulů?

# cat /etc/modules.conf
### This file is automatically generated by update-modules"
#
# Please do not edit this file directly. If you want to change or add
# anything please take a look at the files in /etc/modutils and read
# the manpage for update-modules.
#
### update-modules: start processing /etc/modutils/0keep
# DO NOT MODIFY THIS FILE!
# This file is not marked as conffile to make sure if you upgrade modutils
# it will be restored in case some modifications have been made.
#
# The keep command is necessary to prevent insmod and friends from ignoring
# the builtin defaults of a path-statement is encountered. Until all other
# packages use the new `add path'-statement this keep-statement is essential
# to keep your system working
keep

### update-modules: end processing /etc/modutils/0keep

### update-modules: start processing /etc/modutils/actions
# Special actions that are needed for some modules

# The BTTV module does not load the tuner module automatically,
# so do that in here
post-install bttv insmod tuner
post-remove bttv rmmod tuner


### update-modules: end processing /etc/modutils/actions

### update-modules: start processing /etc/modutils/aliases
# Aliases to tell insmod/modprobe which modules to use

# Uncomment the network protocols you don't want loaded:
# alias net-pf-1 off            # Unix
# alias net-pf-2 off            # IPv4
# alias net-pf-3 off            # Amateur Radio AX.25
# alias net-pf-4 off            # IPX
# alias net-pf-5 off            # DDP / appletalk
# alias net-pf-6 off            # Amateur Radio NET/ROM
# alias net-pf-9 off            # X.25
# alias net-pf-10 off           # IPv6
# alias net-pf-11 off           # ROSE / Amateur Radio X.25 PLP
# alias net-pf-19 off           # Acorn Econet
alias net-pf-24 pppoe

alias char-major-10-175 agpgart
alias char-major-10-200 tun
alias char-major-81     bttv
alias char-major-108    ppp_generic
alias /dev/ppp          ppp_generic
alias tty-ldisc-3       ppp_async
alias tty-ldisc-14      ppp_synctty
alias ppp-compress-21   bsd_comp
alias ppp-compress-24   ppp_deflate
alias ppp-compress-26   ppp_deflate

# Crypto modules (see http://www.kerneli.org/)
alias loop-xfer-gen-0   loop_gen
alias loop-xfer-3       loop_fish2
alias loop-xfer-gen-10  loop_gen
alias cipher-2          des
alias cipher-3          fish2
alias cipher-4          blowfish
alias cipher-6          idea
alias cipher-7          serp6f
alias cipher-8          mars6
alias cipher-11         rc62
alias cipher-15         dfc2
alias cipher-16         rijndael
alias cipher-17         rc5


### update-modules: end processing /etc/modutils/aliases

### update-modules: start processing /etc/modutils/alsa-base
# snd module options
options snd device_mode=0660
# autoloader aliases
alias char-major-116 snd
alias char-major-14 soundcore
alias sound-slot-0 snd-card-0
alias sound-slot-1 snd-card-1
alias sound-slot-2 snd-card-2
alias sound-slot-3 snd-card-3
alias sound-slot-4 snd-card-4
alias sound-slot-5 snd-card-5
alias sound-slot-6 snd-card-6
alias sound-slot-7 snd-card-7
above sound-slot-0 snd-pcm-oss snd-mixer-oss snd-seq-oss
above sound-slot-1 snd-pcm-oss snd-mixer-oss snd-seq-oss
above sound-slot-2 snd-pcm-oss snd-mixer-oss snd-seq-oss
above sound-slot-3 snd-pcm-oss snd-mixer-oss snd-seq-oss
above sound-slot-4 snd-pcm-oss snd-mixer-oss snd-seq-oss
above sound-slot-5 snd-pcm-oss snd-mixer-oss snd-seq-oss
above sound-slot-6 snd-pcm-oss snd-mixer-oss snd-seq-oss
above sound-slot-7 snd-pcm-oss snd-mixer-oss snd-seq-oss
alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
alias sound-service-0-12 snd-pcm-oss
# Load optional modules above their base modules
above snd-pcm snd-pcm-oss
above snd-mixer snd-mixer-oss
above snd-seq snd-seq-oss snd-seq-midi
# Cause a script to be run after snd-emu8000-synth module initialization
post-install snd-emu8000-synth /lib/alsa/modprobe-post-install snd-emu8000-synth
# Cause a script to be run after card driver module initialization
post-install snd-ad1816a /lib/alsa/modprobe-post-install snd-ad1816a
post-install snd-ad1848 /lib/alsa/modprobe-post-install snd-ad1848
post-install snd-ali5451 /lib/alsa/modprobe-post-install snd-ali5451
post-install snd-als100 /lib/alsa/modprobe-post-install snd-als100
post-install snd-als4000 /lib/alsa/modprobe-post-install snd-als4000
post-install snd-asihpi /lib/alsa/modprobe-post-install snd-asihpi
post-install snd-atiixp /lib/alsa/modprobe-post-install snd-atiixp
post-install snd-au8810 /lib/alsa/modprobe-post-install snd-au8810
post-install snd-au8820 /lib/alsa/modprobe-post-install snd-au8820
post-install snd-au8830 /lib/alsa/modprobe-post-install snd-au8830
post-install snd-azt2320 /lib/alsa/modprobe-post-install snd-azt2320
post-install snd-azt3328 /lib/alsa/modprobe-post-install snd-azt3328
post-install snd-azx /lib/alsa/modprobe-post-install snd-azx
post-install snd-ca0106 /lib/alsa/modprobe-post-install snd-ca0106
post-install snd-cmi8330 /lib/alsa/modprobe-post-install snd-cmi8330
post-install snd-cmipci /lib/alsa/modprobe-post-install snd-cmipci
post-install snd-cs4231 /lib/alsa/modprobe-post-install snd-cs4231
post-install snd-cs4232 /lib/alsa/modprobe-post-install snd-cs4232
post-install snd-cs4236 /lib/alsa/modprobe-post-install snd-cs4236
post-install snd-cs4281 /lib/alsa/modprobe-post-install snd-cs4281
post-install snd-cs46xx /lib/alsa/modprobe-post-install snd-cs46xx
post-install snd-darla20 /lib/alsa/modprobe-post-install snd-darla20
post-install snd-darla24 /lib/alsa/modprobe-post-install snd-darla24
post-install snd-dt019x /lib/alsa/modprobe-post-install snd-dt019x
post-install snd-emu10k1 /lib/alsa/modprobe-post-install snd-emu10k1
post-install snd-emu10k1x /lib/alsa/modprobe-post-install snd-emu10k1x
post-install snd-ens1370 /lib/alsa/modprobe-post-install snd-ens1370
post-install snd-ens1371 /lib/alsa/modprobe-post-install snd-ens1371
post-install snd-es1688 /lib/alsa/modprobe-post-install snd-es1688
post-install snd-es18xx /lib/alsa/modprobe-post-install snd-es18xx
post-install snd-es1938 /lib/alsa/modprobe-post-install snd-es1938
post-install snd-es1968 /lib/alsa/modprobe-post-install snd-es1968
post-install snd-es968 /lib/alsa/modprobe-post-install snd-es968
post-install snd-fm801 /lib/alsa/modprobe-post-install snd-fm801
post-install snd-gina20 /lib/alsa/modprobe-post-install snd-gina20
post-install snd-gina24 /lib/alsa/modprobe-post-install snd-gina24
post-install snd-gina3g /lib/alsa/modprobe-post-install snd-gina3g
post-install snd-gusclassic /lib/alsa/modprobe-post-install snd-gusclassic
post-install snd-gusextreme /lib/alsa/modprobe-post-install snd-gusextreme
post-install snd-gusmax /lib/alsa/modprobe-post-install snd-gusmax
post-install snd-harmony /lib/alsa/modprobe-post-install snd-harmony
post-install snd-hdsp /lib/alsa/modprobe-post-install snd-hdsp
post-install snd-hdspm /lib/alsa/modprobe-post-install snd-hdspm
post-install snd-ice1712 /lib/alsa/modprobe-post-install snd-ice1712
post-install snd-ice1724 /lib/alsa/modprobe-post-install snd-ice1724
post-install snd-indigo /lib/alsa/modprobe-post-install snd-indigo
post-install snd-indigodj /lib/alsa/modprobe-post-install snd-indigodj
post-install snd-indigoio /lib/alsa/modprobe-post-install snd-indigoio
post-install snd-intel8x0 /lib/alsa/modprobe-post-install snd-intel8x0
post-install snd-interwave /lib/alsa/modprobe-post-install snd-interwave
post-install snd-interwave-stb /lib/alsa/modprobe-post-install snd-interwave-stb
post-install snd-korg1212 /lib/alsa/modprobe-post-install snd-korg1212
post-install snd-layla20 /lib/alsa/modprobe-post-install snd-layla20
post-install snd-layla24 /lib/alsa/modprobe-post-install snd-layla24
post-install snd-layla3g /lib/alsa/modprobe-post-install snd-layla3g
post-install snd-maestro3 /lib/alsa/modprobe-post-install snd-maestro3
post-install snd-mia /lib/alsa/modprobe-post-install snd-mia
post-install snd-mixart /lib/alsa/modprobe-post-install snd-mixart
post-install snd-mona /lib/alsa/modprobe-post-install snd-mona
post-install snd-mpu401 /lib/alsa/modprobe-post-install snd-mpu401
post-install snd-msnd-pinnacle /lib/alsa/modprobe-post-install snd-msnd-pinnacle
post-install snd-mtpav /lib/alsa/modprobe-post-install snd-mtpav
post-install snd-nm256 /lib/alsa/modprobe-post-install snd-nm256
post-install snd-opl3sa2 /lib/alsa/modprobe-post-install snd-opl3sa2
post-install snd-opti92x-ad1848 /lib/alsa/modprobe-post-install snd-opti92x-ad1848
post-install snd-opti92x-cs4231 /lib/alsa/modprobe-post-install snd-opti92x-cs4231
post-install snd-opti93x /lib/alsa/modprobe-post-install snd-opti93x
post-install snd-pc98-cs4232 /lib/alsa/modprobe-post-install snd-pc98-cs4232
post-install snd-pcxhr /lib/alsa/modprobe-post-install snd-pcxhr
post-install snd-pdaudiocf /lib/alsa/modprobe-post-install snd-pdaudiocf
post-install snd-pdplus /lib/alsa/modprobe-post-install snd-pdplus
post-install snd-portman2x4 /lib/alsa/modprobe-post-install snd-portman2x4
post-install snd-powermac /lib/alsa/modprobe-post-install snd-powermac
post-install snd-rme32 /lib/alsa/modprobe-post-install snd-rme32
post-install snd-rme96 /lib/alsa/modprobe-post-install snd-rme96
post-install snd-rme9652 /lib/alsa/modprobe-post-install snd-rme9652
post-install snd-sa11xx-uda1341 /lib/alsa/modprobe-post-install snd-sa11xx-uda1341
post-install snd-sb16 /lib/alsa/modprobe-post-install snd-sb16
post-install snd-sb8 /lib/alsa/modprobe-post-install snd-sb8
post-install snd-sbawe /lib/alsa/modprobe-post-install snd-sbawe
post-install snd-serialmidi /lib/alsa/modprobe-post-install snd-serialmidi
post-install snd-serial-u16550 /lib/alsa/modprobe-post-install snd-serial-u16550
post-install snd-sgalaxy /lib/alsa/modprobe-post-install snd-sgalaxy
post-install snd-sonicvibes /lib/alsa/modprobe-post-install snd-sonicvibes
post-install snd-sscape /lib/alsa/modprobe-post-install snd-sscape
post-install snd-sun-amd7930 /lib/alsa/modprobe-post-install snd-sun-amd7930
post-install snd-sun-cs4231 /lib/alsa/modprobe-post-install snd-sun-cs4231
post-install snd-sun-dbri /lib/alsa/modprobe-post-install snd-sun-dbri
post-install snd-trident /lib/alsa/modprobe-post-install snd-trident
post-install snd-usb-audio /lib/alsa/modprobe-post-install snd-usb-audio
post-install snd-usb-usx2y /lib/alsa/modprobe-post-install snd-usb-usx2y
post-install snd-via82xx /lib/alsa/modprobe-post-install snd-via82xx
post-install snd-vx222 /lib/alsa/modprobe-post-install snd-vx222
post-install snd-vxp440 /lib/alsa/modprobe-post-install snd-vxp440
post-install snd-vxpocket /lib/alsa/modprobe-post-install snd-vxpocket
post-install snd-wavefront /lib/alsa/modprobe-post-install snd-wavefront
post-install snd-ymfpci /lib/alsa/modprobe-post-install snd-ymfpci
# Prevent abnormal drivers from grabbing index 0
options snd-atiixp-modem index=-2
options snd-bt87x index=-2
options snd-intel8x0m index=-2
options snd-via82xx-modem index=-2

### update-modules: end processing /etc/modutils/alsa-base

### update-modules: start processing /etc/modutils/apm
alias char-major-10-134 apm
alias /dev/apm_bios             /dev/misc/apm_bios
alias /dev/misc/apm_bios        apm

### update-modules: end processing /etc/modutils/apm

### update-modules: start processing /etc/modutils/lirc
#This file is modified by lirc's maintainer scripts.
#Any 'options' line asociated with the selected hardware will be replaced.
#However 'add options' lines will be left alone, so you can use that for
#additional module parameters.
#       ej:
#               add options lirc_serial sense=0
options lirc_serial io= irq=


### update-modules: end processing /etc/modutils/lirc

### update-modules: start processing /etc/modutils/paths
# This file contains a list of paths that modprobe should scan,
# beside the ones that are compiled into the modutils tools
# themselves.


### update-modules: end processing /etc/modutils/paths

### update-modules: start processing /etc/modutils/arch/i386
alias parport_lowlevel parport_pc
alias char-major-10-144 nvram
alias binfmt-0064 binfmt_aout
alias char-major-10-135 rtc

### update-modules: end processing /etc/modutils/arch/i386

[kozzi]

no to je narez tak bych rek ze ten symlink nedelej spis vytvor prazdnej soubor /etc/modprobe.conf a jako root spust alsaconf -c /etc/modprobe.conf a pak to resetuj a uvidis a potom sem hod vypis toho /etc/modprobe.conf kdyby to neslo

[Martin]

# cat /etc/modprobe.conf
alias snd-card-0 snd-sb16
options snd-sb16 index=0

Tento kod je taky napsany v

# cat /etc/modprobe.d/sound
alias snd-card-0 snd-sb16
options snd-sb16 index=0

[kozzi]

no tak pridej do /etc/modules radek snd-sb16 a melo by to byt OK po restartu by ti vse melo jed

[Martin]

Děkuji mockrát, problém vyřešen.