Acer TravelMate 4501WLMi

Podpora:	kompletní
Ovladač:	v jádře

Technické parametry

• 1.5GHz Intel Pentium M 715
• 512MB PC2700 SDRAM
• 60GB hard disk
• QSI SDW-042 DVD writer
• 64MB ATi Mobility Radeon 9700 graphics
• 15.4in 1,280 x 800 TFT
• V.92 modem
• 10/100 Ethernet (broadcom)
• 802.11b/g WLAN (ipw2200)
• 3 x USB 2
• 1 x mini-FireWire
• 1 x Type II PC Card slot
• Memory card slot

Identifikace pod Linuxem

cat /proc/cpuinfo

processor       : 0
vendor_id       : GenuineIntel
cpu family      : 6
model           : 13
model name      : Intel(R) Pentium(R) M processor 1.50GHz
stepping        : 6
cpu MHz         : 600.000
cache size      : 2048 KB
fdiv_bug        : no
hlt_bug         : no
f00f_bug        : no
coma_bug        : no
fpu             : yes
fpu_exception   : yes
cpuid level     : 2
wp              : yes
flags           : fpu vme de pse tsc msr mce cx8 sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 ss tm pbe up est tm2
bogomips        : 1285.45

lspci

00:00.0 Host bridge: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
00:00.1 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
00:00.3 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
00:01.0 PCI bridge: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to AGP Controller (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 83)
00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 03)
00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03)
00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 03)
01:00.0 VGA compatible controller: ATI Technologies Inc RV350 [Mobility Radeon 9600 M10]
02:02.0 Ethernet controller: Broadcom Corporation BCM4401 100Base-T (rev 01)
02:04.0 Network controller: Intel Corporation PRO/Wireless 2200BG Network Connection (rev 05)
02:06.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller
02:06.2 FireWire (IEEE 1394): Texas Instruments OHCI Compliant IEEE 1394 Host Controller
02:06.3 Mass storage controller: Texas Instruments PCIxx21 Integrated FlashMedia Controller

cat /proc/asound/cards

 0 [I82801DBICH4   ]: ICH4 - Intel 82801DB-ICH4
                      Intel 82801DB-ICH4 with unknown codec at 0xd0000c00, irq 10
 1 [Modem          ]: ICH-MODEM - Intel 82801DB-ICH4 Modem
                      Intel 82801DB-ICH4 Modem at 0x2400, irq 10

cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_driver

acpi-cpufreq

lsinput

/dev/input/event0
   bustype : BUS_I8042
   vendor  : 0x1
   product : 0x1
   version : 43841
   name    : "AT Translated Set 2 keyboard"
   phys    : "isa0060/serio0/input0"
   bits ev : EV_SYN EV_KEY EV_MSC EV_LED EV_REP

/dev/input/event1
   bustype : BUS_I8042
   vendor  : 0x2
   product : 0x7
   version : 0
   name    : "SynPS/2 Synaptics TouchPad"
   phys    : "isa0060/serio4/input0"
   bits ev : EV_SYN EV_KEY EV_ABS

/dev/input/event2
   bustype : BUS_ISA
   vendor  : 0x1f
   product : 0x1
   version : 256
   name    : "PC Speaker"
   phys    : "isa0061/input0"
   bits ev : EV_SYN EV_SND

Postup zprovoznění pod Linuxem

Skoro vse bezelo bez nastavovani, jadro bylo 2.6.17. Nebyl videt stav baterie, ale to resi jadro 2.6.18 (modul sbs) (upravu dsdt jsem vzdal). Vypalovat jsem jeste nezkousel, ale necekam problemy. Irda pri startu trosku zlobi, jeste jsem nezkousel, ale irattach bezi. Pro wifi je treba stahnout firmware z http://ipw2200.sf.net. Na grafiku pouzivam modul radeon a radeonfb, v glxinfo mi rika, ze mam direct rendering.

Dokument vytvořil: Libor Klepac, 15.10.2006 00:49 | Zobrazeno: 948×