TS-7250

Podpora:	kompletní
Ovladač:	dodává výrobce

Technické parametry

200MHz CPU ARM9 32/64MB RAM
32/128MB NAND Flash
PC/104 bus, SPI bus, 20 DIO
10/100 PCI Ethernet
2x USB Host
1x RS485, 1x RS232
RTC
12bit A/D
RoHS
kernel 2.4 dodává výrobce

Identifikace pod Linuxem

Linux version 2.4.26-ts9 (root@marvin) (gcc version 3.3) #5 Po čen 18 11:35:56 C             EST 2007
CPU: Arm920Tid(wb) revision 0
Machine: ep9301
On node 0 totalpages: 2048
zone(0): 2048 pages.
zone(1): 0 pages.
zone(2): 0 pages.
On node 1 totalpages: 2048
zone(0): 2048 pages.
zone(1): 0 pages.
zone(2): 0 pages.
On node 2 totalpages: 2048
zone(0): 2048 pages.
zone(1): 0 pages.
zone(2): 0 pages.
On node 3 totalpages: 2048
zone(0): 2048 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyAM0,115200 ip=dhcp root=/dev/mtdblock1 devfs=nom             ount
Relocating machine vectors to 0xffff0000
Calibrating delay loop... 99.94 BogoMIPS
Memory: 8MB 8MB 8MB 8MB = 32MB total
Memory: 28796KB available (1095K code, 302K data, 52K init)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
CPU: Testing write buffer: pass
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
ttyAM0 at MMIO 0x808c0000 (irq = 52) is a AMBA
ttyAM1 at MMIO 0x808d0000 (irq = 54) is a AMBA
ttyAM2 at MMIO 0x808e0000 (irq = 55) is a AMBA
pty: 1024 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ enabled
Real Time Clock Driver v1.10f
ep93xx_eth() version: ep93xx_eth.c: V1.0 09/04/2003 Cirrus Logic
about to do sbc_setinfo
Searching for NANDNAND device: Manufacturer ID: 0x20, Chip ID: 0x75 (ST Micro NAND 32MiB 3,3V 8-bi             t)
Scanning device for bad blocks
Using static partition definition
Creating 3 MTD partitions on "NAND 32MiB 3,3V 8-bit":
0x00000000-0x00004000 : "TS-BOOTROM"
0x00004000-0x01d04000 : "Linux"
0x01d04000-0x02000000 : "RedBoot"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
enable_irq(39) unbalanced from c02b7864
Sending DHCP requests .., OK
IP-Config: Got DHCP answer from 192.168.4.11, my address is 192.168.4.17
IP-Config: Complete:
      device=eth0, addr=192.168.4.17, mask=255.255.255.0, gw=192.168.4.1,
     host=192.168.4.17, domain=xxxxxxxx.cz, nis-domain=(none),
     bootserver=192.168.4.11, rootserver=192.168.4.11, rootpath=
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NetWinder Floating Point Emulator V0.97 (double precision)
yaffs: Attempting MTD mount on 31.1, "1f:01"
VFS: Mounted root (yaffs filesystem).
Freeing init memory: 52K flash...

Postup zprovoznění pod Linuxem

Zapnout .

Poznámka

SBC (single board computer) postavený na ARM. Výrobce ho dodává s Linuxem, ale lpí na 2.4.26. Existuje neoficiální port na 2.6.x, více na arm.mydatex.cz. Foto.

Dokument vytvořil: Daniel Smolik, 16.1.2008 13:58 | Poslední úprava: Fluttershy, yay!, 27.2.2011 15:09 | Historie změn | Zobrazeno: 2497×