ST3120026AS

Ovladač:

v jádře

Technické parametry

SATA disk, 7200rpm, 8M cache, 120G kapacita

Identifikace pod Linuxem

# hdparm -I /dev/hde
ATA device, with non-removable media
        Model Number:       ST3120026AS
        Serial Number:      3JT3ZMTG
        Firmware Revision:  3.18
Standards:
        Used: ATA/ATAPI-6 T13 1410D revision 2
        Supported: 6 5 4 3
Configuration:
        Logical         max     current
        cylinders       16383   65535
        heads           16      1
        sectors/track   63      63
        --
        CHS current addressable sectors:    4128705
        LBA    user addressable sectors:  234441648
        LBA48  user addressable sectors:  234441648
        device size with M = 1024*1024:      114473 MBytes
        device size with M = 1000*1000:      120034 MBytes (120 GB)
Capabilities:
        LBA, IORDY(can be disabled)
        bytes avail on r/w long: 4      Queue depth: 1
        Standby timer values: spec'd by Standard
        R/W multiple sector transfer: Max = 16  Current = 16
        Recommended acoustic management value: 254, current value: 0
        DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
             Cycle time: min=120ns recommended=120ns
        PIO: pio0 pio1 pio2 pio3 pio4
             Cycle time: no flow control=240ns  IORDY flow control=120ns
Commands/features:
        Enabled Supported:
           *    READ BUFFER cmd
           *    WRITE BUFFER cmd
           *    Host Protected Area feature set
           *    Look-ahead
           *    Write cache
           *    Power Management feature set
                Security Mode feature set
           *    SMART feature set
           *    FLUSH CACHE EXT command
           *    Mandatory FLUSH CACHE command
           *    Device Configuration Overlay feature set
           *    48-bit Address feature set
                SET MAX security extension
           *    DOWNLOAD MICROCODE cmd
           *    SMART self-test
           *    SMART error logging
Security:
                supported
        not     enabled
        not     locked
        not     frozen
        not     expired: security count
        not     supported: enhanced erase
Checksum: correct

Poznámka

Ziadne problemy - treba mat ovladace na SATA radic, rychlost podobna ako na PATA disku. Ide mi na KT600 chipsete s jadrom 2.6.6 (Fedora Core 2)

--edit
bol som upozorneny ze na radici Silicon Image 3512 s jadrom 2.6.x ma disk problemy (zatuhnutie systemu)
Na Fedore tiez pokial nedam pri boote parameter pci=noacpi system nejde. Povazoval som to za chybu VIA kt600 radica. Bez tohto parametra ani s jadrom 2.6.8-1.521.
Jediny system 2.6.x ktory isiel bez problemov bol Danix (isiel aj boot zo SATA disku) - skusal som este slackware 10.0 a mandrake 10.0

Dokument vytvořil: Zaphod, 29.6.2004 10:21 | Zobrazeno: 869×