Western Digital WD6400AADS

Technické parametry

• Kapacita: 640 GB ~ 596 GiB
• Otáčky: IntelliPower (5400 rpm)
• Rozhraní: SATA II 3 Gb/s
• Cache: 32 MB
• Rozměry: standartní 3.5"
• Hluk v idle: 23 dBA
• Hluk v seek 0: 27 dBA
• Spotřeba v read/write: 4.86 W
• Spotřeba v idle: 2.82 W
• Spotřeba v standby: 0.38 W
• Spotřeba v sleep: 0.38 W

Zdroj

Identifikace pod Linuxem

[root@paris ~]# hdparm -I /dev/sdb

/dev/sdb:

ATA device, with non-removable media
Model Number: WDC WD6400AADS-00M2B0
Serial Number: WD-WCAV53029955
Firmware Revision: 01.00A01
Transport: Serial, SATA 1.0a, SATA II Extensions, SATA Rev 2.5, SATA Rev 2.6
Standards:
Supported: 8 7 6 5
Likely used: 8
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: 268435455
LBA48 user addressable sectors: 1250263728
Logical/Physical Sector size: 512 bytes
device size with M = 1024*1024: 610480 MBytes
device size with M = 1000*1000: 640135 MBytes (640 GB)
cache/buffer size = unknown
Capabilities:
LBA, IORDY(can be disabled)
Queue depth: 32
Standby timer values: spec'd by Standard, with device specific minimum
R/W multiple sector transfer: Max = 16 Current = 16
Recommended acoustic management value: 128, current value: 254
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5 udma6
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* SMART feature set
Security Mode feature set
* Power Management feature set
* Write cache
* Look-ahead
* Host Protected Area feature set
* WRITE_BUFFER command
* READ_BUFFER command
* NOP cmd
* DOWNLOAD_MICROCODE
Power-Up In Standby feature set
* SET_FEATURES required to spinup after power up
SET_MAX security extension
Automatic Acoustic Management feature set
* 48-bit Address feature set
* Device Configuration Overlay feature set
* Mandatory FLUSH_CACHE
* FLUSH_CACHE_EXT
* SMART error logging
* SMART self-test
* General Purpose Logging feature set
* 64-bit World wide name
* WRITE_UNCORRECTABLE_EXT command
* {READ,WRITE}_DMA_EXT_GPL commands
* Segmented DOWNLOAD_MICROCODE
* Gen1 signaling speed (1.5Gb/s)
* Gen2 signaling speed (3.0Gb/s)
* Native Command Queueing (NCQ)
* Host-initiated interface power management
* Phy event counters
* NCQ priority information
DMA Setup Auto-Activate optimization
* Software settings preservation
* SMART Command Transport (SCT) feature set
* SCT Long Sector Access (AC1)
* SCT LBA Segment Access (AC2)
* SCT Features Control (AC4)
* SCT Data Tables (AC5)
unknown 206[12] (vendor specific)
unknown 206[13] (vendor specific)
Security:
Master password revision code = 65534
supported
not enabled
not locked
not frozen
not expired: security count
supported: enhanced erase
128min for SECURITY ERASE UNIT. 128min for ENHANCED SECURITY ERASE UNIT.
Logical Unit WWN Device Identifier: 50014ee203855881
NAA : 5
IEEE OUI : 0014ee
Unique ID : 203855881
Checksum: correct



Postup zprovoznění pod Linuxem

Podpora v jádře, netřeba nic nastavovat.

Poznámka

Disk trpí stejně jako další disky od WD nadměrným parkováním hlaviček (popsáno třeba zde). Nastavení APM přes
[root@paris ~]# hdparm -B 255 /dev/sdb
je nefunkční, nejde ani jenom ztlumit, ani vypnout. Aby se disk neuparkoval k smrti (garantovaný Load Cycle Count je 300 000), je potřeba použít utilitu wdidle3.exe, samozřejmě pouze pro DOS. Obraz CD s FreeDOSem a danou utilitou je třeba tady.

[root@paris ~]# hdparm -tT /dev/sdb

/dev/sdb:
Timing cached reads: 3656 MB in 2.00 seconds = 1827.95 MB/sec
Timing buffered disk reads: 302 MB in 3.01 seconds = 100.23 MB/sec


Dokument vytvořil: Hue, 6.2.2011 13:00 | Poslední úprava: Hue, 27.2.2011 15:09 | Historie změn | Zobrazeno: 1164×