Magnex iMex-A2U2

Ovladač:

v jádře

Technické parametry

jakykoli 2.5" HDD
usb 1.1, 2.0
plug & play

Identifikace pod Linuxem

tail -n 20 /var/log/messages

Dec  4 14:42:54 evilz-slave kernel: usb 2-2: new full speed USB device using address 2
Dec  4 14:42:55 evilz-slave kernel: usb 2-2: Product: USB 2.0 Storage Device
Dec  4 14:42:55 evilz-slave kernel: usb 2-2: SerialNumber: 12345678901234567890
Dec  4 14:42:55 evilz-slave kernel: scsi0 : SCSI emulation for USB Mass Storage devices
Dec  4 14:42:55 evilz-slave kernel:   Vendor: USB 2.0   Model: Storage Device    Rev: 0100
Dec  4 14:42:55 evilz-slave kernel:   Type:   Direct-Access                      ANSI SCSI revision: 02
Dec  4 14:42:55 evilz-slave kernel: SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB)
Dec  4 14:42:55 evilz-slave kernel:  sda:<7>usb-storage: queuecommand called
Dec  4 14:42:55 evilz-slave kernel: Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Dec  4 14:42:55 evilz-slave kernel: Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0,  type 0


cat /proc/bus/usb/devices

T:  Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  2 Spd=12  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=0402 ProdID=5642 Rev= 1.00
S:  Product=USB 2.0 Storage Device
S:  SerialNumber=12345678901234567890
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=01(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms

Postup zprovoznění pod Linuxem

pripojit, namountovat a jedem :)

osobne pouzivam pro cdrom/usb zarizeni supermount-ng -> o mountovani/odmountovani se nestaram

Poznámka

zarizeni jsem sehnal cca za 300kc - super! :) spokojenost.

Dal jsem do nej 40GB disk a "lita" to prumerne 20MB/s

Dokument vytvořil: Jan Navratil, 4.12.2004 14:46 | Zobrazeno: 884×