Dotaz: EZ-Drive v ubuntu

[ronny]

Kamarad ma desku ECS K7S6A, ktera nepodporuje disky vetsi jak 137GB. Má 2 disky 40GB a jeden 160GB. Na disku 160GB ma v MBR nainstalovany ovladac EZ-DRIVE a disk je rozdelen na 3 partition, ale Kubuntu vidi jen disk jako ez-drive a cely nezformatovany disk .. nechce moc experimentovat protoze uz jednou o data na disku prisel.. ve starsim jadru podpora ezdrive byla ale v novych uz neni.. nevite jak na to?

vypis fdisk -l

Zařízení Boot Start End Blocks Id System

/dev/hdb1 * 1 1023 8217243 55 EZ-Drive

Odpovědi

[Petr Šobáň]

Vykašlat se na nejakej EZdrive.

Zálohovat data a disk vyhodit z biosu pokud ho bios detekuje blbě a botovat z toho 40G a linux už si nahraje ovladače pro řadič a bios nepotřebuje.

PS. Co je to za desku s blbým biosem že neumí HD větší jak 120G ? Já mám ECS K7S5A

00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev d0) (prog-if 80 [Master])
        Subsystem: Silicon Integrated Systems [SiS] SiS5513 EIDE Controller (A,B step)
        Flags: bus master, fast devsel, latency 128
        I/O ports at ff00 [size=16]

A zvládá 300G disk OK akorát už se nedá manuálně nastavit parametry, musí být nastaven na auto v biosu.

[root@soban ~]# smartctl -i /dev/hda
smartctl version 5.36 [i686-redhat-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Barracuda 7200.7 and 7200.7 Plus family
Device Model:     ST3120026A
Serial Number:    3JT2N1KB
Firmware Version: 3.06
User Capacity:    120�034�123�776 bytes
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   6
ATA Standard is:  ATA/ATAPI-6 T13 1410D revision 2
Local Time is:    Sat Sep  2 23:34:06 2006 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

[root@soban ~]# smartctl -i /dev/hdb
smartctl version 5.36 [i686-redhat-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Device Model:     ST3300622A
Serial Number:    4NF12QL5
Firmware Version: 3.AAE
User Capacity:    300�069�052�416 bytes
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   7
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Sat Sep  2 23:34:10 2006 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

[root@soban ~]# smartctl -i /dev/hdd
smartctl version 5.36 [i686-redhat-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Barracuda ATA V family
Device Model:     ST3120023A
Serial Number:    3KA1DVAF
Firmware Version: 3.33
User Capacity:    120�034�123�776 bytes
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   6
ATA Standard is:  ATA/ATAPI-6 T13 1410D revision 2
Local Time is:    Sat Sep  2 23:34:13 2006 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

[ronny]

bohuzel, kamarad o tomto vi, ale ma to kvuli widlim.. jelikoz blbe widle berou info z biosu.. tim by prisel o data.. :( jinak v SUSE 8 mu to slo OK..